Search NASA⌕ Search

SEARCH · Search NASA

Results for “spin current”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Interface-driven spin-torque ferromagnetic resonance by Rashba coupling at the interface between nonmagnetic materials

The Rashba-Edelstein effect stems from the interaction between the electron's spin and its momentum induced by spin-orbit interaction at an interface or a surface. It was shown that the inverse Rashba-Edelstein effect can be used to convert a spin current into a charge current. Here, we demonstrate the reverse process of a charge-to spin-current conversion at a Bi/Ag Rashba interface. We show that this interface-driven spin current can drive an adjacent ferromagnet to resonance. We employ a spin-torque ferromagnetic resonance excitation/detection scheme which was developed originally for a bulk spin-orbital effect, the spin Hall effect. In our experiment, the direct Rashba-Edelstein effect generates an oscillating spin current from an alternating charge current driving the magnetization precession in a neighboring permalloy (Py, Ni 80 Fe 20 ) layer. As a result, electrical detection of the magnetization dynamics is achieved by a rectificationmechanism of the time dependent multilayer resistance arising from the anisotropic magnetoresistance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low Offset and Noise in High Biased GaN 2DEG Hall-Effect Plates Investigated With Infrared Microscopy

This article presents GaN two-dimensional electron gas (2DEG) Hall plates with low residual offset and noise at 3 V input bias. We studied devices made from three consecutive fabrication generations through current spinning offset measurements in a zero-field chamber. When operated above 1 V, the first-generation devices charted high residual offsets >1 mT. We reduced these residual offsets by three orders of magnitude in later device generations. Two experiments were performed to confirm the improvements. First, the GaN 2DEG Hall-effect plates were measured with infrared microscopy during current spinning to investigate current crowding and Joule heating. The low offset devices had minimal thermal gradients while the high offset devices had large thermal variations during current spinning. Second, zero-field current spinning was used to compare GaN 2DEG Hall-effect plates against typical commercial silicon Hall-effect plates. The Si devices had residual offsets >10μT biased at 3 V and AlGaN/GaN devices had residual offset <4 μT at 3 V, and an InAlN/GaN devices operated at 2 V had a residual offset <4 μT . Thus, for the first time, GaN 2DEG Hall-effect plates were shown to operate with high bias with low offsets and noise, which enables high fidelity sensing applications in extreme environments.

2DEG↗

Spin transport in an insulating ferrimagnetic-antiferromagnetic-ferrimagnetic trilayer as a function of temperature

We present a study of the transport properties of thermally generated spin currents in an insulating ferrimagnetic-antiferromagnetic-ferrimagnetic trilayer over a wide range of temperature. Spin currents generated by the spin Seebeck effect (SSE) in a yttrium iron garnet (YIG) YIG/NiO/YIG trilayer on a gadolinium gallium garnet (GGG) substrate were detected using the inverse spin Hall effect (ISHE) in Pt. By studying samples with different NiO thicknesses, the spin diffusion length of NiO was determined to be ~3.8 nm at room temperature. Surprisingly, a large increase of the SSE signal was observed below 30 K, and the field dependence of the signal closely follows a Brillouin function for an S=7/2 spin. The increase of the SSE signal at low temperatures could thus be associated with the paramagnetic SSE from the GGG substrate. Besides, a broad peak in the SSE response was observed around 100 K. These observations are important in understanding the generation and transport properties of spin currents through magnetic insulators and the role of a paramagnetic substrate in spin current generation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

How to control spin-Seebeck current in a metal-quantum dot-magnetic insulator junction

The control of the spin-Seebeck current is still a challenging task for the development of spin caloritronic devices. In this work, we construct a spin-Seebeck device by inserting a quantum dot (QD) between the metal lead and magnetic insulator. Using the slave-particle approach and noncrossing approximation, we find that the spin-Seebeck effect increases significantly when the energy level of the QD locates near the Fermi level of the metal lead due to the enhancement of spin flipping and occurrences of quantum resonance. Since this can be easily realized by applying a gate voltage in experiments, the spin-Seebeck device proposed here can also work as a thermovoltaic transistor. Moreover, the optimal correlation strength and the energy level position of the QD are discussed to maximize the spin-Seebeck current as required for applications in controllable spin caloritronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dependence of spin pumping and spin transfer torque upon Ni 81 Fe 19 thickness in Ta / Ag / Ni 81 Fe 19 / Ag / Co 2 MnGe / Ag / Ta spin-valve structures

Spin pumping has been studied within Ta / Ag / Ni 81 Fe 19 (0–5 nm) / Ag (6 nm) / Co 2 MnGe (5 nm) / Ag / Ta large-area spin-valve structures, and the transverse spin current absorption of Ni 81 Fe 19 sink layers of different thicknesses has been explored. In some circumstances, the spin current absorption can be inferred from the modification of the Co 2 MnGe source layer damping in vector network analyzer ferromagnetic resonance (VNA-FMR) experiments. However, the spin current absorption is more accurately determined from element-specific phase-resolved x-ray ferromagnetic resonance (XFMR) measurements that directly probe the spin transfer torque (STT) acting on the sink layer at the source layer resonance. Comparison with a macrospin model allows the real part of the effective spin mixing conductance to be extracted. We find that spin current absorption in the outer Ta layers has a significant impact, while sink layers with thicknesses of less than 0.6 nm are found to be discontinuous and superparamagnetic at room temperature, and lead to a noticeable increase of the source layer damping. For the thickest 5-nm sink layer, increased spin current absorption is found to coincide with a reduction of the zero frequency FMR linewidth that we attribute to improved interface quality. Furthermore, this study shows that the transverse spin current absorption does not follow a universal dependence upon sink layer thickness but instead the structural quality of the sink layer plays a crucial role.

74 ATOMIC AND MOLECULAR PHYSICS↗

Periodic magnetic structures generated by spin–polarized currents in nanostripes

The influence of a transverse spin–polarized current on long ferromagnetic nanostripes is studied numerically. The magnetization behavior is analyzed for all range of the applied currents, up to the saturation. It is shown that the saturation current is a nonmonotonic function of the stripe width. A number of stable periodic magnetization structures are observed below the saturation. Type of the periodical structure depends on the stripe width. Besides the one–dimensional domain structure, typical for narrow wires, and the two–dimensional vortex–antivortex lattice, typical for wide films, a number of intermediate structures are observed, e.g., cross–tie and diamond state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Dzyaloshinskii-Moriya interaction on the magnetic vortex oscillator driven by spin-polarized current

By micromagnetic simulation, we investigated the dynamic of magnetic vortex driven by spin-polarized current in Permalloy nanodisks in the presence of interfacial/superficial Dzyaloshinskii-Moriya interactions (DMI). It is found that spin-polarized current can drive the vortex precession. In the presence of DMI, the oscillation frequency of the vortex is about 3 times higher than that of without DMI for the same nanodisk. Moreover, the linewidth is more narrow than that of without DMI when the radius of nanodisk is 50 nm. In addition, the vortex can support a higher current density than that of without DMI. Introduction of DMI in this system can provide a new way to design magnetic vortex oscillator.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modeling the Spin Motor Current of the International Space Station's Control Moment Gyroscopes

The International Space Station (ISS) attitude control is provided by two means: The Russian Segment uses thrusters and the U.S. Segment uses double-gimbaled control moment gyroscopes (CMG). CMGs are used as momentum exchange devices, providing non propulsive attitude control for the vehicle. The CMGs are very important for the ISS program because, first, they save propellant - which needs to be transferred to the Station in special cargo vehicles - and, second, they provide the microgravity environment on the Station - which is necessary for scientific experiments planned for the ISS mission. Since 2002, when one of the CMG on the ISS failed, all CMGs are closely monitored. High gimbal rates, vibration spikes, unusual variations of spin motor current and bearing temperatures are of great concern, since these parameters are the CMG health indicators. The telemetry analysis of these and some other CMG parameters is used to determine constrains and make changes to the CMGs operation on board. These CMG limitations, in turn, may limit the ISS attitude control capabilities and may be critical to ISS operation. Therefore, it is important to know whether the CMG parameter is nominal or out of family, and why. The goal of this project is to analyze an important CMG parameter - spin motor current. Some operational decisions are made now based on the spin motor current signatures. The spin motor current depends on gimbal rates, ISS rates, and spin bearing friction. The spin bearing friction in turn depends on the bearing temperatures, wheel rates, normal load - which is a function of gimbal and wheel rates - lubrication, etc. The first task of this project is to create a spin motor current mathematical model based on CMG dynamics model and the current knowledge on bearing friction in microgravity.

Pereira, Miguel A.↗

Competing spin pumping effects in magnetic hybrid structures

Pure spin current can be detected by its conversion into charge current in nanometer thick nonmagnetic metal layer with large spin-orbit coupling by means of the inverse spin Hall effect (ISHE). Recently, it has been shown that the metallic ferromagnet Permalloy (Py) can also be used as spin current detector in experiments in which an ISHE voltage is created in a Py layer in contact with the insulating ferromagnet yttrium iron garnet (YIG) under a thermal gradient in the longitudinal spin Seebeck configuration. Here, we report experiments with microwave driven spin pumping in heterostructures made with single crystal YIG film and a nanometer thick Py or Pt layer that show that Py behaves differently than nonmagnetic metals as a spin current detector. The results are attributed to the competition between the spin currents generated by the dynamics of the magnetizations in YIG and in Py, which are exchange coupled at the interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Floquet Spin Splitting and Spin Generation in Antiferromagnets

In antiferromagnetic spintronics, accessing the spin degrees of freedom is essential for generating spin currents and manipulating magnetic order, which generally requires lifting spin degeneracy. This is typically achieved through relativistic spin-orbit coupling or nonrelativistic spin splitting in altermagnets. Here, we propose an alternative approach: a dynamical spin splitting induced by an optical field in antiferromagnets. By coupling the driven system to a thermal bath, we demonstrate the emergence of steady-state pure spin currents as well as linear-response longitudinal and transverse spin currents. Crucially, thermal bath engineering enables a nonrelativistic Edelstein effect—the generation of a net spin accumulation—without relying on spin-orbit coupling. Furthermore, our results provide a broadly applicable and experimentally tunable route to control spins in antiferromagnets, offering new opportunities for spin generation and manipulation in antiferromagnetic spintronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Manipulating quantum spins by spin-polarized current: an approach based upon $\mathcal{PT}$ -symmetric quantum mechanics

We propose here a quantum processor based upon single-molecule magnets and spin transfer torque described by $\mathcal{PT}$-symmetric quantum mechanics. In recent years $\mathcal{PT}$-symmetric Hamiltonians have been used to obtain stability thresholds of various systems out of equilibrium. One such concern is the magnetization reversal due to the spin transfer torque generated by a spin-polarized current. So far the studies of this problem have mostly focused on a classical limit of a large spin. In this work we are discussing spin tunneling and quantum dynamics of a small spin induced by a spin polarized current within a $\mathcal{PT}$-symmetric theory. Furthermore, this description can be used for manipulating spin qubits by electric currents.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nonreciprocal superfluidlike topological spin transport

We study superfluidlike spin transport facilitated by thermal diffusion of magnetic domain walls, where the positive and negative chiralities of domain walls act as opposite topological charges. The topological charge conservation leads to algebraic decay of the spin current carried by domain walls, allowing for the transport of spin over extended distances. We demonstrate that the presence of the Dzyaloshinskii-Moriya interaction can lead to nonreciprocity in spin flow, thus effectively realizing a spin ratchet. In one scenario, the nonreciprocity arises due to diode-like behavior where the nucleation of domain walls is governed by thermal activation for one direction of spin current and by viscous injection for the other direction of spin current. Here, we confirm our predictions by micromagnetic simulations of domain walls in TmIG nanowire.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Large spin Hall effect in Si at room temperature

Silicon's weak intrinsic spin-orbit coupling and centrosymmetric crystal structure are a critical bottleneck to the development of Si spintronics, because they lead to an insignificant spin Hall effect (spin current generation) and inverse spin Hall effect (spin current detection). In this work, we undertake current, magnetic field, crystallography dependent magnetoresistance, and magnetothermal transport measurements to study the spin transport behavior in freestanding Si thin films. We observe a large spin Hall magnetoresistance in both $\mathcal{p}$ – Si and $\mathcal{n}$ – Si at room temperature and it is an order of magnitude larger than that of Pt. One explanation of the unexpectedly large and efficient spin Hall effect is spin-phonon coupling instead of spin-orbit coupling. The macroscopic origin of the spin-phonon coupling can be large strain gradients that can exist in the freestanding Si films. This discovery in a light, earth abundant and centrosymmetric material opens a new path of strain engineering to achieve spin dependent properties in technologically highly developed materials.

36 MATERIALS SCIENCE↗

Spin-pump-induced spin transport in a thermally evaporated pentacene film

We report the spin-pump-induced spin transport properties of a pentacene film prepared by thermal evaporation. In a palladium(Pd)/pentacene/Ni{sub 80}Fe{sub 20} tri-layer sample, a pure spin-current is generated in the pentacene layer by the spin-pumping of Ni{sub 80}Fe{sub 20}, which is independent of the conductance mismatch problem in spin injection. The spin current is absorbed into the Pd layer, converted into a charge current with the inverse spin-Hall effect in Pd, and detected as an electromotive force. This is clear evidence for the pure spin current at room temperature in pentacene films prepared by thermal evaporation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetization stability analysis of the Stoner-Wohlfarth model under a spin-polarized current with a tilted polarization

The stationary-state solutions of magnetization dynamics under a spin-polarized current that was polarized in an arbitrary direction were investigated by solving the Landau-Lifshitz-Gilbert-Slonczewski equation for a single-domain magnet. Taking into consideration the uniaxial magnetic anisotropy, the equilibrium directions of the magnetization vectors were analytically obtained by solving an algebraic cubic equation. It was found that one to three pairs of magnetization equilibrium states existed, depending on the current intensity and the direction of the spin polarization. By numerically analyzing the stabilities of these equilibrium states, the threshold switching current for the reversing the magnetic vector was obtained under different current polarization configurations, which may be useful for use in future spintronics devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of a spin-polarized current assisted Ørsted field in magnetization patterning

A spin-polarized electrical current leads to a variety of periodical magnetic structures in nanostripes. In the presence of the Ørsted field, which always assists an electrical current, the basic types of magnetic structures, i.e., a vortex-antivortex crystal and cross-tie domain walls, survive. The Ørsted field prevents saturation of the nanostripe and a longitudinal domain wall appears instead. Possible magnetization structures in stripes with different geometrical and material properties are studied numerically and analytically.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Anti-damping spin transfer torque through epitaxial nickel oxide

We prepare the high quality epitaxial MgO(001)[100]/Pt(001)[100]/NiO(001)[100]/FeNi/SiO{sub 2} films to investigate the spin transport in the NiO antiferromagnetic insulator. The ferromagnetic resonance measurements of the FeNi under a spin current injection from the Pt by the spin Hall effect revealed the change of the ferromagnetic resonance linewidth depending on the amount of the spin current injection. The results can be interpreted that there is an angular momentum transfer through the NiO. A high efficient angular momentum transfer we observed in the epitaxial NiO can be attributed to the well-defined orientation of the antiferromagnetic moments and the spin quantization axis of the injected spin current.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Current-induced spin torque resonance of magnetic insulators affected by field-like spin-orbit torques and out-of-plane magnetizations

The spin-torque ferromagnetic resonance (ST-FMR) in a bilayer system consisting of a magnetic insulator such as Y{sub 3}Fe{sub 5}O{sub 12} and a normal metal with spin-orbit interaction such as Pt is addressed theoretically. We model the ST-FMR for all magnetization directions and in the presence of field-like spin-orbit torques based on the drift-diffusion spin model and quantum mechanical boundary conditions. ST-FMR experiments may expose crucial information about the spin-orbit coupling between currents and magnetization in the bilayers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗