Search NASA⌕ Search

SEARCH · Search NASA

Results for “stabilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Passive stabilization of the Long Duration Exposure Facility (LDEF)

The results of a study on the application of the magnetically anchored rate damper to gravity gradient stabilization of the Long Duration Exposure Facility (LDEF) are presented. The analyses and simulations required to investigate the use of an existing viscous magnetic rate damper for rate stabilizing the LDEF spacecraft were performed. The following tasks were included: linear performance estimates, capture and damper requirements, and performance prediction. Each of these tasks was performed for two gravity gradient stabilization configurations; an axisymmetric configuration for two-axis (pitch and roll) stability; and a non-axisymmetric configuration for three-axis stability. The results are presented by stabilization configuration.

Das, A.↗
NASA NTRS1975

Stability and transient motion of a plain journal mounted in flexible damped supports

Results are presented for an extensive study of the influence of damped flexible supports on the stability-threshold speed of a symmetric rotor mounted in nonlinear fluid-film bearings. A stability analysis is conducted by applying the Routh criteria and calculating the damped eigenvalues of the system. Stability maps are given in dimensionless form for a range of support stiffness, damping, and mass ratios. The effect of rotor imbalance on the stability of rotor systems is examined, and it is shown that time transient orbits of shaft and support motions clearly indicate their dynamic behavior for both stable and unstable operating speeds. Simple design criteria are proposed for choosing the support stiffness and damping on the basis of rotor weight and journal clearance to promote optimum stability. It is concluded that the use of a flexible damped support system may increase the stability threshold of a plain journal bearing and that damper supports should promote smoother and quieter machine operation by suppressing oil whirl and attenuating unbalanced rotational forces.

Kirk, R. G.↗
NASA NTRS1976

Decentralization, stabilization, and estimation of large-scale linear systems

In this short paper we consider three closely related aspects of large-scale systems: decentralization, stabilization, and estimation. A method is proposed to decompose a large linear system into a number of interconnected subsystems with decentralized (scalar) inputs or outputs. The procedure is preliminary to the hierarchic stabilization and estimation of linear systems and is performed on the subsystem level. A multilevel control scheme based upon the decomposition-aggregation method is developed for stabilization of input-decentralized linear systems Local linear feedback controllers are used to stabilize each decoupled subsystem, while global linear feedback controllers are utilized to minimize the coupling effect among the subsystems. Systems stabilized by the method have a tolerance to a wide class of nonlinearities in subsystem coupling and high reliability with respect to structural perturbations. The proposed output-decentralization and stabilization schemes can be used directly to construct asymptotic state estimators for large linear systems on the subsystem level. The problem of dimensionality is resolved by constructing a number of low-order estimators, thus avoiding a design of a single estimator for the overall system.

Siljak, D. D.↗
NASA NTRS1976

Investigation of aeroelastic stability phenomena of a helicopter by in-flight shake test

The analytical capability of the helicopter stability program is discussed. The parameters which are found to be critical to the air resonance characteristics of the soft in-plane hingeless rotor systems are detailed. A summary of two model test programs, a 1/13.8 Froude-scaled BO-105 model and a 1.67 meter (5.5 foot) diameter Froude-scaled YUH-61A model, are presented with emphasis on the selection of the final parameters which were incorporated in the full scale YUH-61A helicopter. Model test data for this configuration are shown. The actual test results of the YUH-61A air resonance in-flight shake test stability are presented. Included are a concise description of the test setup, which employs the Grumman Automated Telemetry System (ATS), the test technique for recording in-flight stability, and the test procedure used to demonstrate favorable stability characteristics with no in-plane damping augmentation (lag damper removed). The data illustrating the stability trend of air resonance with forward speed and the stability trend of ground resonance for percent airborne are presented.

Miao, W. L.↗
NASA NTRS1979

On stability theory

It is found that under mild assumptions, feedback system stability can be concluded if one can 'topologically separate' the infinite-dimensional function space containing the system's dynamical input-output relations into two regions, one region containing the dynamical input-output relation of the 'feedforward' element of the system and the other region containing the dynamical output-input relation of the 'feedback' element. Nonlinear system stability criteria of both the input-output type and the state-space (Liapunov) type are interpreted in this context. The abstract generality and conceptual simplicity afforded by the topological separation perspective clarifies some of the basic issues underlying stability theory and serves to suggest improvements in existing stability criteria. A generalization of Zames' (1966) conic-relation stability criterion is proved, laying the foundation for improved multivariable generalizations of the frequency-domain circle stability criterion for nonlinear systems.

Safonov, M. G.↗
NASA NTRS1981

A multiloop generalization of the circle criterion for stability margin analysis

In order to provide a theoretical tool well suited for use in characterizing the stability margins (e.g., gain and phase margins) of multiloop feedback systems, multiloop input-output stability results generalizing the circle stability criterion are considered. Generalized conic sectors with 'centers' and 'radii' determined by linear dynamical operators are employed to enable an engineer to specify the stability margins which he desires as a frequency-dependent convex set of modeling errors (including nonlinearities, gain variations, and phase variations) which the system must be able to tolerate in each feedback loop without instability. The resulting stability criterion gives sufficient conditions for closed-loop stability in the presence of such frequency-dependent modeling errors, even when the modeling errors occur simultaneously in all loops.

Safonov, M. G.↗
NASA NTRS1983

Formulation and solution of rotary-wing aeroelastic stability and response problems

The state of the art in the formulation and solution of rotary-wing aeroelastic stability and response problems is reviewed in detail. The approximations used in the structural, inertia and aerodynamic operators are discussed. The important role of geometric nonlinearities, due to moderate deflections, and aerodynamic stall in the aeroelastic stability and response problem are identified. It is also shown that geometric nonlinearities are of primary importance in aeroelastic stability calculations, and have a more limited, though important, role in response calculations. Next, formulation of coupled rotor/fuselage problems is described, for both air and ground resonance type problems. Both topics, the isolated blade problem and the coupled rotor/fuselage problem, are treated for both hover and forward flight. Solution of aeroelastic stability and response problems proceeds in two stages. First, the spatial dependence is eliminated by using Galerkin's method, or by using the finite element method. Next the nonlinear, or linear, ordinary differential equation with periodic coefficients have to be solved for stability or response. Efficient numerical methods for accomplishing these objectives are presented in a comprehensive manner. The paper contains a number of illustrative numerical results which are intended to clarify various aspects of the modeling process and serve as representative results for both aeroelastic stability and response calculations for a variety of blade and rotor configurations.

Friedmann, P. P.↗
NASA NTRS1983

The stability of coronal loops - Finite-length and pressure-profile limits

Results are described from a quickly converging, necessary-and-sufficient, MHD-stability test for coronal-loop models. The primary stabilizing influence arises from magnetic line tying at the photosphere, and this end conditions requires a series expansion of possible loop excitations. The stability boundary is shown to quickly approach a limit as the number of terms increases, providing a critical length for the loop in proportion to its transverse magnetic scale. Several models of force-free-field profiles are tested and the stability behavior of a localized current channel, embedded in an external current-free region, is shown to be superior to that of other, broader, current profiles. Pressure-gradient effects, leading to increased or decreased stability, are shown to be amplified by line tying. Long loops must either conduct low net current, or exhibit an axial-field reversal coexisting with a low-pressure core. The limits on stability depend on the magnetic aspect ratio, the plasma-to-magnetic pressure ratio, and the field orientation at the loop edge. Applications of these results to the structure of coronal loops are described.

Einaudi, G.↗
NASA NTRS1985

The superconducting cavity stability ruby maser oscillator

Analysis of an application of the rudy maser to a superconducting Cavity Stabilized oscillator shows many attractive features. These derive from the mechancial stability inherent in an all-cryogenic design and from the properties of the ruby maser itself. A multiple-cavity design has been developed to allow physical separation of the high-Q superconducting cavity and the ruby element with its requried applied magnetic field. Mode selection is accomplished in this design by tuning the ruby by means of the applied field. We conclude that such an oscillator would perform well, even with cavity Q's as low as 10 to the 8th power allowing the use of a superconductor-on-sapphire resonator with its greater rigidity and lower thermal expansion. A first test of the Superconducting Cavity Stabilized Maser Oscillator (SCSMO) confirms the efficacy of the multiple-cavity design and the applicability of the ruby maser. Frequency variation less than 4x10 to the minus 11th power was measured in the stabilized mode and is attributed to the reference oscillator and to instabilities in the pump source. Variation of 10 to the minus 10th power was observed in the low-Q unstabilized mode, again attributable to pump fluctuations. Even so, direct scaling to a Q of 10 the 9th power predicts a stability better than 10 to the minus 15th power. Together with results showing the lowest losses to date in sapphire at microwave frequencies, and preliminary experiments on superconductor-on-sapphire resonators, frequency stability, levels as low as 10 to the minus 17th power are indicated.

Dick, G. J.↗
NASA NTRS1986

Incompressible boundary-layer stability analysis of LFC experimental data for sub-critical Mach numbers

An incompressible boundary-layer stability analysis of Laminar Flow Control (LFC) experimental data was completed and the results are presented. This analysis was undertaken for three reasons: to study laminar boundary-layer stability on a modern swept LFC airfoil; to calculate incompressible design limits of linear stability theory as applied to a modern airfoil at high subsonic speeds; and to verify the use of linear stability theory as a design tool. The experimental data were taken from the slotted LFC experiment recently completed in the NASA Langley 8-Foot Transonic Pressure Tunnel. Linear stability theory was applied and the results were compared with transition data to arrive at correlated n-factors. Results of the analysis showed that for the configuration and cases studied, Tollmien-Schlichting (TS) amplification was the dominating disturbance influencing transition. For these cases, incompressible linear stability theory correlated with an n-factor for TS waves of approximately 10 at transition. The n-factor method correlated rather consistently to this value despite a number of non-ideal conditions which indicates the method is useful as a design tool for advanced laminar flow airfoils.

Berry, S. A.↗
NASA NTRS1985

Why have hydrostatic bearings been avoided as a stabilizing element for rotating machines

The advantages are discussed of hydrostatic, high pressure bearings as providers of higher margin of stability to the rotor/bearing systems. It is apparent that deliberate use of hydrostatic bearing high pressure lubricated (any gas or liquid) can easily be used to build higher stability margin into rotating machinery, in spite of the thirty years bias against high pressure lubrication. Since this supply pressure is controllable (the Direct Dynamic Stiffness at lower eccentricity is also controllable) so that within some rotor system limits, the stability margin and dynamic response of the rotor system is more readily controllable. It may be possible to take advantage of this effect in the various seals, as well as the bearings, to assist with stability margin and dynamic response of rotating machinery. The stability of the bearing can be additionally improved by taking advantage of the anti-swirling concept. The high pressure fluid supply inlets should be located tangentially at the bearing circumference and directed against rotation. The incoming fluid flow creates stability by reducing the swirling rate.

Bently, D. E.↗
NASA NTRS1987

Aeroelastic effects in multirotor vehicles. Part 2: Methods of solution and results illustrating coupled rotor/body aeromechanical stability

This report is a sequel to the earlier report titled, Aeroelastic Effects in Multi-Rotor Vehicles with Application to Hybrid Heavy Lift System, Part 1: Formulation of Equations of Motion (NASA CR-3822). The trim and stability equations are presented for a twin rotor system with a buoyant envelope and an underslung load attached to a flexible supporting structure. These equations are specialized for the case of hovering flight. A stability analysis, for such a vehicle with 31 degrees of freedom, yields a total of 62 eigenvalues. A careful parametric study is performed to identify the various blade and vehicle modes, as well as the coupling between various modes. Finally, it is shown that the coupled rotor/vehicle stability analysis provides information on both the aeroelastic stability as well as complete vehicle dynamic stability. Also presented are the results of an analytical study aimed at predicting the aeromechanical stability of a single rotor helicopter in ground resonance. The theoretical results are found to be in good agreement with the experimental results, thereby validating the analytical model for the dynamics of the coupled rotor/support system.

Venkatesan, C.↗
NASA NTRS1988

Stability margins for Hurwitz polynomials

The authors treat the robust stability issue using the characteristic polynomial, for two different cases: first in coefficient space with respect to perturbations in the coefficient of the characteristic polynomial; and then for a control system containing perturbed parameters in the transfer function description of the plant. In coefficient space, a simple expression is first given for the l-(squared) stability margin for both the monic and nonmonic cases. Following this, a method is given to find the l(infinity) margin, and the method is extended to reveal much larger stability regions. In parameter space the authors consider all single-input (multi-output) or single-output (multi-input) systems with a fixed controller and a plant described by a set of transfer functions which are ratios of polynomials with variable coefficients. A procedure is presented to calculate the radius of the largest stability ball in the space of these variable parameters. The calculation serves as a stability margin for the control system. The formulas that result are quasi-closed-form expressions for the stability margin and are computationally efficient.

Chapellat, Herve↗
NASA NTRS1989

The stability analysis of magnetohydrodynamic equilibria - Comparing the thermodynamic approach with the energy principle

This paper is a contribution to the stability analysis of current-carrying plasmas, i.e., plasma systems that are forced by external mchanisms to carry a nonrelaxing electrical current. Under restriction to translationally invariant configurations, the thermodynamic stability criterion for a multicomponent plasma is rederived within the framework of nonideal MHD. The chosen dynamics neglects scalar resistivity, but allows for other types of dissipation effects both in Ohm's law and in the equation of motion. In the second section of the paper, the thermodynamic stability criterion is compared with the ideal MHD based energy principle of Bernstein et al. With the help of Schwarz's inequality, it is shown that the former criterion is always more 'pessimistic' than the latter, i.e., that thermodynamic stability implies stability according to the MHD principle, but not vice versa. This reuslt confirms the physical plausible idea that dissipational effects tend to weaken the stability properties of current-carrying plasma equilibria by breaking the constraints of ideal MHD and allowing for possibly destabilizing effects such as magnetic field line reconfiguration.

Brinkmann, R. P.↗
NASA NTRS1987

Method for stabilizing thick honeycomb core composite articles

A method of stabilizing thick honeycomb core composites is disclosed. The method comprises bonding a layer of resin impregnated woven graphite fibers to one surface of the honeycomb core, then curing the resin impregnates forming a stabilized honeycomb core. This stabilized core is then cut to net shape and the composite structure is formed by laying one or more resin impregnated fiber layers onto the stabilized core surf aces and curing the lay-up under heat and pressure forming the composite article. Also disclosed is a stabilized honeycomb subassembly formed by bonding a graphite fiber, resin impregnated layer onto one of the honeycomb core surfaces and curing the resins, then shaping the stabilized honeycomb core to the desired form.

Gary J Jacaruso↗
NASA NTRS1991

A sequential approach to multivariable stability robustness analysis

In sequential loop closure, the importance of evaluating the stability and stability robustness at the intermediate loop closures is well known, yet how the stability and stability robustness evaluated at the intermediate steps contribute to the stability and stability robustness of the overall feedback system must be developed. An analysis of the complete feedback system reveals the multivariable Nyquist contributions from the intermediate loop closures. It is also shown that the results greatly simplify if frequency separation exists between the intermediate loops. The analysis is presented with a two-step loop closure procedure using 'inner' and 'outer' loops which can be generalized to multi-step situations. The control of the longitudinal dynamics of an aircraft is addressed to further clarify and demonstrate the results.

Newman, Brett↗
NASA NTRS1992

Two-dimensional stability of laminar flames

The stability of laminar flames was studied numerically and the dependence of stability on finite rate chemistry with low activation energy and variable thermodynamic and transport properties was addressed. The calculations show that activation energy and details of chemistry play a minor role in altering the linear neutral stability results from asymptotic analysis. Variable specific heat makes a marginal change to the stability; variable transport properties, on the other hand, tend to substantially enhance the stability from a critical wave number of about 0.50 to 0.20. Also, the effects of variable properties tend to nullify the effects of nonunity Lewis number. When the Lewis number of a single species is different from unity, as is true in a hydrogen-air premixed flame, the stability results remain close to that of unity Lewis number.

Mukunda, H. S.↗
NASA NTRS1991

Frequency stability of GPS NAVSTAR block 1 and block 2 on-orbit clocks

Analysis of the frequency stability of the on-orbit NAVSTAR clocks os performed by the Naval Research Laboratory. The frequency stability is presented for sample times of one day to 30 days. Composite frequency stability profiles are presented for Block 1 and Block 2 NAVSTAR clocks. Several NAVSTAR cesium clocks show frequency stabilities of a few parts in 10^(14) for long sample times. Time-domain noise-process analysis shows the dominant noise type to be white frequency noise for sample times of one to ten days. The non-stationary stochastic behavior of one of the cesium clocks, illustrated by its frequency stability history, shows that the frequency stability is not always time-invariant.

Thomas B. Mccaskill↗