Search NASA⌕ Search

SEARCH · Search NASA

Results for “stack sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Evaporator Development for an Evaporative Heat Pipe System

As fossil fuel resources continue to deplete, research for alternate power sources continues to develop. One of these alternate technologies is fuel cells. They are a practical fuel source able to provide significant amounts of power for applications from laptops to automobiles and their only byproduct is water. However, although this technology is over a century old and NASA has been working with it since the early 1960 s there is still room for improvement. The research I am involved in at NASA's Glenn Research Center is focusing on what is called a regenerative fuel cell system. The unique characteristic of this type of system is that it used an outside power source to create electrolysis of the water it produces and it then reuses the hydrogen and oxygen to continue producing power. The advantage of this type of system is that, for example, on space missions it can use solar power to recharge its gas supplies between periods when the object being orbited blocks out the sun. This particular system however is far from completion. This is because of the many components that are required to make up a fuel cell that need to be tested individually. The specific part of the system that is being worked on this summer of 2004 is the cooling system. The fuel cell stack, that is the part that actually creates the power, also produces a lot of heat. When not properly cooled, it has been known to cause fires which, needless to say are not conducive to the type of power that is trying to be created. In order to cool the fuel cell stack in this system we are developing a heat pipe cooling system. One of the main components of a heat pipe cooling system is what is known as the evaporator, and that is what happens to be the part of the system we are developing this summer. In most heat pipe systems the evaporator is a tube in which the working fluid is cooled and then re-circulated through the system to absorb more heat energy from the fuel cell stack. For this system, instead of a tube, the evaporator is made up of a stack-up of screen material and absorbent membranes inside a stainless steel shell and held together by a film adhesive and epoxy. There is an initial design for this flat plate evaporator, however is has not yet been made. The components of the stack-up are known, so all testing is focused on how it will all go together. This includes finding an appropriate epoxy to make the evaporator conductive all the way through and finding a way to hold the required tight tolerances as the stainless steel outer shell is put together. By doing the tests on smaller samples of the stack-ups and then testing the fill size component, the final flat plate evaporator will reach its final design so that research can continue on other parts of the regenerative fue1 cell system, and another step in the improvement of fue1 cell technology can be made.

Peters, Leigh C.↗

Planck intermediate results: XLIII. Spectral energy distribution of dust in clusters of galaxies

Although infrared (IR) overall dust emission from clusters of galaxies has been statistically detected using data from the Infrared Astronomical Satellite (IRAS), it has not been possible to sample the spectral energy distribution (SED) of this emission over its peak, and thus to break the degeneracy between dust temperature and mass. By complementing the IRAS spectral coverage with Planck satellite data from 100 to 857 GHz, we provide in this paper new constraints on the IR spectrum of thermal dust emission in clusters of galaxies. We achieve this by using a stacking approach for a sample of several hundred objects from the Planck cluster sample. This procedure averages out fluctuations from the IR sky, allowing us to reach a significant detection of the faint cluster contribution. We also use the large frequency range probed by Planck, together with component-separation techniques, to remove the contamination from both cosmic microwave background anisotropies and the thermal Sunyaev-Zeldovich effect (tSZ) signal, which dominate at ν ≤ 353 GHz. By excluding dominant spurious signals or systematic effects, averaged detections are reported at frequencies 353 GHz ≤ ν ≤ 5000 GHz. We confirm the presence of dust in clusters of galaxies at low and intermediate redshifts, yielding an SED with a shape similar to that of the Milky Way. Planck’s resolution does not allow us to investigate the detailed spatial distribution of this emission (e.g. whether it comes from intergalactic dust or simply the dust content of the cluster galaxies), but the radial distribution of the emission appears to follow that of the stacked SZ signal, and thus the extent of the clusters. Finally, the recovered SED allows us to constrain the dust mass responsible for the signal and its temperature.

79 ASTRONOMY AND ASTROPHYSICS↗

The Mass–Concentration Relation and the Stellar-to-halo Mass Ratio in the CFHT Stripe 82 Survey

We present a new measurement of the mass–concentration relation and the stellar-to-halo mass ratio over the halo-mass range 5 × 10{sup 12} to 2 × 10{sup 14} M {sub ⊙}. To achieve this, we use weak lensing measurements from the Canada–France–Hawaii Telescope Stripe 82 Survey (CS82), combined with the central galaxies from the redMaPPer cluster catalog and the LOWZ/CMASS galaxy sample of the Sloan Digital Sky Survey-III Baryon Oscillation Spectroscopic Survey Tenth Data Release. The stacked lensing signals around these samples are modeled as a sum of contributions from the central galaxy, its dark matter halo, and the neighboring halos, as well as a term for possible centering errors. We measure the mass–concentration relation: c{sub 200c}(M)=A(((M{sub 200c})/(M{sub 0}))){sup B} with A = 5.24 ± 1.24, B = −0.13 ± 0.10 for 0.2 < z < 0.4, and A = 6.61 ± 0.75, B = −0.15 ± 0.05 for 0.4 < z < 0.6. These amplitudes and slopes are completely consistent with predictions from recent simulations. We also measure the stellar-to-halo mass ratio for our samples, and find results consistent with previous measurements from lensing and other techniques.

79 ASTRONOMY AND ASTROPHYSICS↗

Stack Characterization System Development and Testing

Oak Ridge National Laboratory, as well as the rest of the U.S. Department of Energy community, has numerous off-gas stacks that need to be decommissioned, demolished, and packaged for disposal. Disposal requires a waste disposition determination phase. Process knowledge typically makes a worst-case scenario decision that may place lower-level waste into a more expensive higher-level waste disposal category. Truly useful radiological and chemical sampling can be problematic on old stacks due to their inherent height and access hazards, and many of these stacks have begun to deteriorate structurally. A remote stack characterization system (SCS) that can manage sample and data collection removes people from the hazards and provides an opportunity for access to difficult to reach internal stack areas. The SCS is a remotely operated articulated radiological data recovery system designed to deploy down into off-gas stacks from the top via crane. The battery-powered SCS is designed to stabilize itself against the stack walls and move various data recovery systems into areas of interest on the inner stack walls. Stabilization is provided by a tripod structure; sensors are mounted in a rotatable bipod underneath the tripod. Sensors include a beta/gamma/alpha detector, a removable contaminant multi-sample automated sampler, and a multi-core remote core drill. Multiple cameras provide remote task viewing, support for sampling, and video documentation of the process. A delay in funding has delayed project delivery somewhat. Therefore, this paper describes the technology and shows fabrication and testing progress to the extent that data is available.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Development of a lithium fluoride zinc sulfide based neutron multiplicity counter

Past 3He shortages led to investigations into replacement options for neutron detectors in systems that previously used 3He-based technologies. The goal of this research was to investigate the feasibility of a full-scale lithium fluoride with silver activated zinc sulfide (LiF/ZnS) based neutron multiplicity counter. The LiF/ZnS based neutron multiplicity counter (LiNMC) was developed based on an iterative process between modeling and experimental measurements. Each active region of the LiNMC contains five sheets of LiF/ZnS sandwiched between six sheets of wavelength shifting plastic to form neutron detection stacks. The wavelength shifted scintillation light was collected by photomultiplier tubes located on each end of the stacks. Twelve such detector stacks were placed around a sample chamber in a square arrangement with lithiated high density polyethylene blocks in the corners to reflect high energy neutrons and capture low energy neutrons. Preliminary calibration with a 252Cf neutron source showed that the LiNMC was able to achieve 36% neutron detection efficiency (ε) and an 11.7 μs neutron die-away time (τ) for a doubles Figure-of-merit (ε2/ τ) of 109. This is the highest doubles Figure-of-merit performance measured to-date for a 3He-free neutron multiplicity counter system. By the end of this project, the LiNMC’s basic components were integrated into a single laboratory scale system capable of proof-of-concept measurements.

3He-free↗

EMP, Attachment 1: Sampling and Analysis Plan (Rev.1)

This Sampling and Analysis Plan (SAP) is written for the Environmental Radiation Task activities related to radioactive air emissions (stack) monitoring and environmental radiological ambient air surveillance of Pacific Northwest National Laboratory (PNNL) operations at the PNNL-Richland campus and PNNL-Sequim campus. PNNL is a U.S. Department of Energy Office of Science laboratory in Richland, Washington. This plan is an attachment to PNNL’s Environmental Radiological Air Monitoring Plan (EMP) (PNNL-20919) and addresses a discrete, vital subject area that is subject to revision independent of the main text of the EMP document. This SAP provides the requirements for planning sampling events and the requirements imposed on the services provided by the analytical laboratory to the PNNL Environmental Radiation Task.

40 CFR 61 Subpart H↗

Localized Excitons in NbSe 2 -MoSe 2 Heterostructures

Neutral and charged excitons (trions) in atomically thin materials offer important capabilities for photonics, from ultrafast photodetectors to highly efficient light-emitting diodes and lasers. Recent studies of van der Waals (vdW) heterostructures comprised of dissimilar monolayer materials have uncovered a wealth of optical phenomena that are predominantly governed by interlayer interactions. Here, we examine the optical properties in NbSe 2 -MoSe 2 vdW hetero- structures, which provide an important model system to study metal–semiconductor interfaces, a common element in optoelectronics. Through low-temperature photoluminescence (PL) microscopy, we discover a sharp emission feature, L1, that is localized at the NbSe 2 -capped regions of MoSe 2 . L1 is observed at energies below the commonly studied MoSe 2 excitons and trions and exhibits temperature- and power-dependent PL consistent with exciton localization in a confining potential. This PL feature is robust, observed in a variety of samples fabricated with different stacking geometries and cleaning procedures. Using first-principles calculations, we reveal that the confinement potential required for exciton localization naturally arises from the in-plane band bending due to the changes in the electron affinity between pristine MoSe 2 and NbSe 2 -MoSe 2 heterostructure. Here, we discuss the implications of our studies for atomically thin optoelectronics devices with atomically sharp interfaces and tunable electronic structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low temperature tunneling magnetoresistance on (La,Sr)MnO{sub 3}/Co junctions with organic spacer layers

This paper concerns with giant magnetoresistance (MR) effects in organic spin valves, which are realized as layered (La,Sr)MnO{sub 3} (LSMO)-based junctions with tris-(8, hydroxyquinoline) aluminum (Alq{sub 3})-spacer and ferromagnetic top layers. The experimental work was focused on the understanding of the transport behavior in this type of magnetic switching elements. The device preparation was carried out in an ultrahigh vacuum chamber equipped with a mask changer by evaporation and sputtering on SrTiO{sub 3} substrates with LSMO stripes deposited by pulsed laser technique. The field and temperature dependences of the MR of the prepared elements are studied. Spin-valve effects at 4.2 K have been observed in a broad resistance interval from 50 {omega} to M{omega} range, however, without systematic dependence on spacer layer thickness and device area. In some samples, the MR changes sign as a function of the bias voltage. The observed similarity in the bias voltages dependences of the MR in comparison with conventional magnetic tunnel junctions with oxide barriers suggests a description of the found effects within the classical tunneling concept. This assumption is also confirmed by a similar switching behavior observed on ferromagnetically contacted carbon nanotube devices. The proposed model implies the realization of the transport via local Co chains embedded in the Alq{sub 3} layer and spin dependent tunneling over barriers at the interface Co grains/Alq{sub 3}/LSMO. The existence of conducting Co chains within the organics is supported by transmission electron microscopic/electron energy loss spectroscopic studies on cross-sectional samples from analogous layer stacks.

36 MATERIALS SCIENCE↗

Effect of ground-state charge transfer on photoexcited charge transfer in transition metal dichalcogenide heterostructures

We report an experimental investigation on the effect of ground-state charge transfer and its induced electric field on photoexcited charge transfer in van der Waals heterostructures. Two heterostructure samples were fabricated by stacking an undoped WSe 2 monolayer with either a Nb-doped or undoped MoSe 2 monolayer. While no ground-state charge transfer is expected in the MoSe 2 /WSe 2 heterostructure, the doped holes in the MoSe 2 :Nb/WSe 2 heterostructure can transfer to WSe 2 , creating a space-charge electric field. By comparing the photoluminescence and time-resolved differential reflectance of the two heterostructures, we find that photoexcited hole transfer from MoSe 2 to WSe 2 is largely blocked by this field, whereas photoexcited electron transfer from WSe 2 to MoSe 2 is less affected. Furthermore, these results provide insight into the impact of doping on the charge-transfer performance of van der Waals heterostructures.

2D materials↗

Type-I and type-II interfaces in a MoSe 2 /WS 2 van der Waals heterostructure

We report experimental evidence that MoSe 2 and WS 2 allow the formation of type-I and type-II interfaces, according to the thickness of the former. Heterostructure samples are obtained by stacking a monolayer WS 2 flake on top of a MoSe 2 flake that contains regions of thickness from one to four layers. Photoluminescence spectroscopy and transient absorption measurements reveal a type-II interface in the regions of monolayer MoSe 2 in contact with monolayer WS 2 . In other regions of the heterostructure formed by multilayer MoSe 2 and monolayer WS 2 , features of type-I interface are observed, including the absence of charge transfer and dominance of intralayer excitons in MoSe 2 . Furthermore, the coexistence of type-I and type-II interfaces in a single heterostructure offers opportunities to design sophisticated two-dimensional materials with finely controlled photocarrier behaviors.

2D materials↗

THE MORPHOLOGY OF PASSIVELY EVOLVING GALAXIES AT z {approx} 2 FROM HUBBLE SPACE TELESCOPE/WFC3 DEEP IMAGING IN THE HUBBLE ULTRA DEEP FIELD

We present near-IR images, obtained with the Hubble Space Telescope and the WFC3/IR camera, of six passive and massive galaxies at redshift 1.3 < z < 2.4 (specific star formation rate <10{sup -2} Gyr{sup -1}; stellar mass M {approx} 10{sup 11} M {sub sun}), selected from the Great Observatories Origins Deep Survey. These images, which have a spatial resolution of {approx}1.5 kpc, provide the deepest view of the optical rest-frame morphology of such systems to date. We find that the light profile of these galaxies is regular and well described by a Sersic model with index typical of today's spheroids. Their size, however, is generally much smaller than today's early types of similar stellar masses, with four out of six galaxies having r{sub e} {approx} 1 kpc or less, in quantitative agreement with previous similar measures made at rest-frame UV wavelengths. The images reach limiting surface brightness {mu}{approx} 26.5 mag arcsec{sup -2} in the F160W bandpass; yet, there is no evidence of a faint halo in the galaxies of our sample, even in their stacked image. We also find that these galaxies have very weak 'morphological k-correction' between the rest-frame UV (from the Advanced Camera for Surveys z band) and the rest-frame optical (WFC3 H band): the Sersic index, physical size, and overall morphology are independent or only mildly dependent on the wavelength, within the errors.

79 ASTRONOMY AND ASTROPHYSICS↗

PROBING THE OFF-STATE OF CLUSTER GIANT RADIO HALOS

We derive the best characterization to date of the properties of radio quiescent massive galaxy clusters through a statistical analysis of their average synchrotron emissivity. We stacked 105 radio images of clusters from the 843 MHz Sydney University Molonglo Sky Survey, all with L{sub X} > 10{sup 44} erg s{sup -1} and redshifts z < 0.2, after removing point-source contamination and rescaling to a common physical size. Each stacked cluster individually shows no significant large-scale diffuse radio emission at current sensitivity levels. Stacking of sub-samples leads to the following results: (1) clusters with L{sub X} > 3 x 10{sup 44} erg s{sup -1} show a 6{sigma} detection of Mpc-scale diffuse emission with a 1.4 GHz luminosity of (2.4 {+-} 0.4) x10{sup 23} W Hz{sup -1}. This is 1.5-2 times lower than the upper limits for radio quiescent clusters from the GMRT Radio Halo Survey and is the first independent confirmation of radio halo bi-modality. (2) Clusters with low X-ray concentrations have a mean radio luminosity (2.6 {+-} 0.6 x 10{sup 23} W Hz{sup -1}) that is at least twice that of high X-ray concentration clusters, and (3) both of these detections are likely close to the low-level 'off-state' of giant radio halos (GRHs) in most or all luminous X-ray clusters, and not due to contributions from a much smaller subset of 'on-state' GRHs following the radio/X-ray luminosity correlation. Upcoming deep radio surveys will conclusively distinguish between these two options. We briefly discuss possible origins for the 'off-state' emission and its implications for magnetic fields in most or all luminous X-ray clusters.

79 ASTRONOMY AND ASTROPHYSICS↗

LOCATING THE ''MISSING'' BARYONS WITH EXTRAGALACTIC DISPERSION MEASURE ESTIMATES

Recently, Thornton and coworkers confirmed a class of millisecond radio bursts likely of extragalactic origin that is well-suited for estimating dispersion measures (DMs). We calculate the probability distribution of DM(z) in different models for how the cosmic baryons are distributed (both analytically and with cosmological simulations). We show that the distribution of DM is quite sensitive to whether the ''missing'' baryons lie around the virial radius of 10{sup 11}-10{sup 13} M{sub ☉} halos or further out, which is not easily constrained with other observational techniques. The intrinsic contribution to DM from each source could complicate studies of the extragalactic contribution. This difficulty is avoided by stacking based on the impact parameter to foreground galaxies. We show that a stacking analysis using a sample of ∼100 DM measurements from arcminute-localized, z ≳ 0.5 sources would place interesting constraints at 0.2-2 halo virial radii on the baryonic mass profile surrounding different galaxy types. Conveniently for intergalactic studies, sightlines that intersect intervening galactic disks should be easily identified owing to scattering. A detectable level of scattering may also result from turbulence in the circumgalactic medium.

79 ASTRONOMY AND ASTROPHYSICS↗

Heterostructural interface engineering for ultrawide-gap nitrides from first principles: Ta C / Al N and Ta C / Ga N rocksalt-wurtzite interfaces

Epitaxial lattice matching is an important condition for the formation of coherent interfaces with low defect densities. However, lattice-matched substrates with the same crystal structure as the active layer are often not available, suggesting opportunities for utilizing heterostructural interfaces. For example, at high Al contents that are interesting for ultrawide-gap applications in power electronics, Al x ⁢Ga 1-x ⁢N semiconductor alloys in the (0001) orientation of the wurtzite (wz) structure become lattice-matched to (111)-oriented rocksalt (rs) Ta⁢C substrates. To predict the expected interface atomic structures under different synthesis conditions, we perform high-throughput density-functional-theory calculations, using an algorithm for systematic sampling of the possible stacking sequences of the atomic layers on the in-plane hexagonal lattice. The approach considers octahedral, tetrahedral, and prismatic coordination motifs, and is generally applicable for the modeling of commensurate rs/wz heterostructural interfaces. Our results provide guidance for synthesis control of substrate-film bonding and the polarity of ultrawide-gap Al x⁢ Ga 1-x⁢ N alloys on Ta⁢C substrates.

36 MATERIALS SCIENCE↗

Neutron and x-ray scattering study of phonon dispersion and diffuse scattering in ( Na , Bi ) Ti O 3 - x BaTi O 3 single crystals near the morphotropic phase boundary

Neutron and x-ray scattering measurements were performed on (Na 1/2 Bi 1/2 )TiO 3-x at % BaTiO 3 (NBT-xBT) single crystals (x = 4, 5, 6.5, and 7.5) across the morphotropic phase boundary (MPB), as a function of both composition and temperature, and probing both structural and dynamical aspects. In addition to the known diffuse scattering pattern near the gamma points, our measurements revealed new, faint superlattice peaks, as well as an extensive diffuse scattering network, revealing a short-range ordering of polar nanoregions (PNR) with a static stacking morphology. Furthermore, in samples with compositions closest to the MPB, our inelastic neutron scattering investigations of the phonon dynamics showed two unusual features in the acoustic phonon branches, between the superlattice points, and between the superlattice points and gamma points, respectively. Finally, these critical elements are not present in the other compositions away from the MPB, which suggests that these features may be related to the tilt modes coupling behavior near the MPB.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Physical properties and thermal stability of Fe 5 - x GeTe 2 single crystals

The magnetic and transport properties of Fe-deficient Fe 5 GeTe 2 single crystals (Fe 5-x GeTe 2 with x≈0.3) were studied and the impact of thermal processing was explored in this work. Quenching crystals from the growth temperature has been previously shown to produce a metastable state that undergoes a strongly hysteretic first-order transition upon cooling below ≈100 K. The first-order transition impacts the magnetic properties, yielding an enhancement in the Curie temperature $T_C$ from 270 to 310 K. In the present work, $T_{HT}$ ≈ 550 K has been identified as the temperature above which metastable crystals are obtained via quenching. Diffraction experiments reveal a structural change at this temperature, and significant stacking disorder occurs when samples are slowly cooled through this $\textit{T}$ range. The transport properties are demonstrated to be similar regardless of the crystal's thermal history. The scattering of charge carriers appears to be dominated by moments fluctuating on the Fe(1) sublattice, which remain dynamic down to ≈100–120 K. Maxima in the magnetoresistance and anomalous Hall resistance are observed near 120 K. The Hall and Seebeck coefficients are also impacted by magnetic ordering on the Fe(1) sublattice. The data suggest that both electrons and holes contribute to conduction above 120 K, but that electrons dominate at lower $\textit{T}$ when all of the Fe sublattices are magnetically ordered. This study demonstrates a strong coupling of the magnetism and transport properties in Fe 5-x GeTe 2 and complements the previous results that demonstrated strong magnetoelastic coupling as the Fe(1) moments order.

36 MATERIALS SCIENCE↗

Second-harmonic and linear spectroscopy of $\textit{α}$-In 2 Se 3

We report spectroscopic measurements of optical transmission, ellipsometry, and second-harmonic generation (SHG) from as-grown vapor-deposited $\textit{α}$-In 2 Se 3 nanoflakes ranging in thickness from a single quintuple layer (QL) to bulk material. In this work, we compare these measurements with ab initio calculations of structural and optical properties. Linear optical measurements yield thickness-dependent band gaps and dielectric functions, while SHG diagnoses microscopic film structure and ferroelectric polarization. The rotational anisotropy of SHG for s-polarized incident photons of energy 1.4 eV reveals crystalline symmetry and orientation of individual QLs. Peak SHG intensity increases from one to three QLs, then decreases for larger numbers, tracking thickness-dependent trends in the second-order susceptibility components $χ^{xxx}$ and $χ^{zxx}$. Comparison of measured and calculated SHG spectra for s-polarized photons of energies between 1.2 and 1.7 eV incident upon two QL samples discriminates among candidate stacking arrangements, and favors an arrangement with electric polarization vectors of the two QLs pointing outward in opposite directions.

36 MATERIALS SCIENCE↗

Quantum Spin Chains: Extent and Persistence of Magnetic Interactions as a Function of Length and Spin

The purpose of this experiment was to gain an improved understanding of magnetic ordering in one-dimensional chains of Fe atoms intercalated with Co or H 2 . Samples were fabricated by stacking layers of phthalocyanines (Pc), macrocyclic square planar molecules, hosting a single transition metal atom in their centre to form well-defined 1D chains, termed MPcs. Superlattices of various chain lengths were prepared on gold-coated sapphire substrates, to study the effects of proximity coupling and the interactions between different metal species. XMCD is ideally suited for this purpose as it provides an element-specific probe of magnetization, as well as resolving different sites and energy levels for each element. We were interested in studying the introduction of ferromagnetism in Co by coupling to the Fe, as well as changes in the co-ordination and local symmetry of atoms in the 1D chains near the interface.

36 MATERIALS SCIENCE↗