Search NASA⌕ Search

SEARCH · Search NASA

Results for “steam”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Embedded sensors integrated into critical components for in situ health monitoring of steam turbines

Operational flexibility is desired in today’s coal-fired power plants to balance power grids by compensating for the variable electricity supply from renewable energy sources and distributed gensets. This demanding requirement accelerates materials degradation and makes in-situ health monitoring essential. Life monitoring of components and subsystems is thus seen as essential in assessing material and mechanical behavior to estimate system reliability, move to a conditionbased maintenance strategy and determine time to failure of the units in their actual operating conditions. Vibration monitoring can be exploited for blade tip timing to measure blade vibration amplitude and tip clearance to detect any deterioration taking place in the condition of steam turbine blades. A failure of a rotating blade can lead to severe turbine damage followed by extensive repairs and loss of power production. A blade vibration monitoring system can help early detection of abnormal blade vibration behavior. In conjunction with a health monitoring system, the vibration characteristics can be analyzed to support a pro-active maintenance and inspection schedule. While the feasibility of this inspection technique has been amply demonstrated, there is a need to install induction probes to magnetize the blade for signal output. Siemens, in partnership with Raytheon Technologies Research Corporation (RTRC), proposes a holistic approach to develop embedded sensors to utilize radio frequency for not only coupling to sensors, but as the sensing modality. The goal of this project is to “embed” the novel sensing approach by using either additively manufactured or extruded waveguides on rotating blades for recording, evaluation and monitoring of blade vibrations in Low Pressure turbines, with applications extending to aero engines

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2023

AOI 3 Life Modelling of Critical Steam Cycle Components in Coal-Fueled Power Plants

Microstructural damage accumulation models have been used to produce calibrated life estimation models for a DR22/P22 steel wye-block welds, and a Jethete stainless steel turbine blade (bucket). The calibrated life estimation models will aid the power plant operator in determining optimal maintenance and operation schedules based upon historical operational data as well as current, or future operation schemes. The impact of this project will enable existing coal-fueled power plants to operate safely for longer periods of time and at higher efficiencies, thereby reducing the economic and environmental impact of the existing coal power plant fleet. Testing, characterization, and modelling indicates that the operating life of P22 pipelines and their welds are dominated by fatigue damage mechanisms. Specifically, fatigue is of no concern in these materials when operating under realistic conditions manifesting in the main steam piping of coal-fueled power plants. However, if a low-temperature overload ever occurs during operation, fatigue will manifest as a damage mechanism of interest. Primary impact provided by the completion of this work is in the manifestation of a detailed ABAQUS solid model providing accurate boundary conditions to enable the prediction of operational stresses and strains. The completed plant solid model, in conjunction with the calibrated fatigue and creep life models provide definitive confirmation that creep is the dominant damage mechanism during operational conditions. Jethete life modelling has been completed by the manifestation of a material-specific, and temperature-specific, Kitagowa diagram. The Kitagowa diagram provides maintenance and operation decision making with scientifically-based go/no-go support based upon the crack-like features that have been identified by use of inspection.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2023

Parametric and Sensitivity Analysis of a Steam Generator Model Using Python and Machine-Learning Tools

For this study, we used Python and machine-learning tools to perform a comprehensive parametric and sensitivity analysis on a steam generator (SG) model. (The Python model was based on a previously completed MATLAB framework for the Holtec SMR-160 SG.) We investigated the influence of various input parameters (e.g., heat transfer coefficient [HTC], Nusselt number, and heat exchanger effectiveness) on the system’s output. With machine-learning tools such as the Risk Analysis Virtual Environment (RAVEN), which was developed at Idaho National Laboratory, we were then able to perform an automated analysis of the SG inputs’ effect on the HTC. The analysis results give valuable insights into the performance and optimization of SG systems. We found the inlet mass flow rate (MFR) to have the greatest impact on the HTC, followed closely by the inlet temperature, and then pressure. Shifting of the input parameters causes the location of the maximum HTC along the SG length to change incrementally. The cold leg (CL) MFR was also found to impact the HTC magnitude as well as the location of the maximum HTC. At between 0.4–0.9 of the total SG length, the input parameters experience maximum impact on the HTC, leading us to suggest that sensors be efficiently placed on the SG so as to closely and effectively monitor thermal-hydraulic properties during reactor operation. We also found that the sensitivity data calculated manually agrees with the RAVEN – based data, confirming the same range of maximum sensitivity. However, the RAVEN-based analysis showed that cold leg pressure and hot leg temperature have a greater impact on the heat transfer coefficient than the mass flow rate, implying that a manual sensitivity study taking only two samples is not accurate.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2026

Tuning Methanol Transformation Pathways for Sustainable Steam Reforming: Na-Promotion Effects on Ag/m-ZrO 2 Catalysts

This work investigates the influence of sodium promotion on Ag/m-ZrO 2 catalysts for methanol steam reforming (MSR), focusing on activity, selectivity, surface chemistry, and mechanistic pathways. Temperature programmed reduction (TPR), XANES/EXAFS, CO 2 TPD, DRIFTS, and temperature programmed surface reaction methods were combined with fixed bed MSR testing to develop an integrated structure–function understanding of Na-modified Ag-ZrO 2 interfaces. Na addition systematically increases surface basicity, stabilizes strongly basic O 2− sites, and weakens the ν(CH) vibrational mode of surface formate, thereby facilitating C–H bond scission and accelerating decarboxylation to CO 2 . At moderate promoter levels (0.5–1.0 wt.% Na), the catalysts show significantly enhanced CO 2 selectivity and increased conversion relative to unpromoted Ag/m-ZrO 2 , while CH 4 formation remains negligible. Excessive Na (≥1.8 wt.%) leads to slower formate decomposition, greater carbonate stabilization, and suppressed conversion, revealing a narrow optimum around 1 wt.% Na. Short-term stability testing demonstrates steady conversion and product selectivity for both unpromoted and Na-promoted catalysts, with the latter maintaining markedly higher CO 2 selectivity. Although Pt/YSZ retains far superior intrinsic activity at ~10× higher space velocity, Ag offers a cost-advantaged alternative where lower cost metals are desirable. Collectively, these findings show that Na promotion enables tunable MSR selectivity on Ag/m-ZrO 2 by directing formate decomposition toward the CO 2 -forming pathway.

CO2 selectivity↗
DOE OSTI2026

Methanol Steam Reforming on Ru/m-ZrO 2 : Sodium Promotion of the CO 2 -Forming Pathway

Sodium (Na) promotion of Ru/m-ZrO 2 was investigated to elucidate how an alkali modification tunes selectivity in methanol steam reforming (MSR). H 2 -TPR/XANES/EXAFS show that Na increases surface basicity and strengthens Ru–O interactions, shifting RuO x reduction and H 2 spillover to a higher temperature. DRIFTS reveals Na-induced red shifts of the formate ν(CH) band and changes in OCO vibrational splitting, consistent with weakening of the formate C–H bond and an altered binding geometry. CO 2 -TPD confirms a monotonic shift toward stronger basic sites with increasing Na concentrations. Under MSR conditions, Na selectively increases CO2 concentration at the expense of CO. At ~80% conversion and 325 °C, CO 2 selectivity increases from 12.0% (unpromoted) to 16.2, 21.0, and 26.5% for 0.5, 1.0, and 1.8% Na, respectively; at ~300 °C and ~66–69% conversion, CO 2 selectivity increases from 8.6% to 23.7% at 1.8% Na. Transient MSR experiments further show earlier and larger H 2 evolution upon Na addition, corroborating the promotion of the dehydrogenation/decarbonylation route to CO 2 + H 2 . We propose that Na increases basicity and modifies the Ru–support interface to favor formate dehydrogenation/decarboxylation, thereby increasing the H 2 yield and lowering CO formation. Ru’s higher-energy, less occupied d-band stabilizes CO and oxygenated intermediates more strongly in the reforming environment, making the CO-forming pathway more resistant to suppression than on Pt.

CO2 selectivity↗
DOE OSTI2021

Promoting the Selectivity of Pt/m-ZrO 2 Ethanol Steam Reforming Catalysts with K and Rb Dopants

The ethanol steam reforming reaction (ESR) was investigated on unpromoted and potassium- and rubidium-promoted monoclinic zirconia-supported platinum (Pt/m-ZrO 2 ) catalysts. Evidence from in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) characterization indicates that ethanol dissociates to ethoxy species, which undergo oxidative dehydrogenation to acetate followed by acetate decomposition. The acetate decomposition pathway depends on catalyst composition. The decarboxylation pathway tends to produce higher overall hydrogen selectivity and is the most favored route at high alkali loading (2.55 wt.% K and higher or 4.25 wt.% Rb and higher). On the other hand, decarbonylation is a significant route for the undoped catalyst or when a low alkali loading (e.g., 0.85% K or 0.93% Rb) is used, thus lowering the overall H 2 selectivity of the process. Results of in situ DRIFTS and the temperature-programmed reaction of ESR show that alkali doping promotes forward acetate decomposition while exposed metallic sites tend to facilitate decarbonylation. In previous work, 1.8 wt.% Na was found to hinder decarbonylation completely. Due to the fact that 1.8 wt.% Na is atomically equivalent to 3.1 wt.% K and 6.7 wt.% Rb, the results show that less K (2.55% K) or Rb (4.25% Rb) is needed to suppress decarbonylation; that is, more basic cations are more efficient promoters for improving the overall hydrogen selectivity of the ESR process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Design of a Test Article and Test Facility to Investigate Flow-Induced Vibration of a Helical Coil Steam Generator

NuScale Power LLC (NuScale) is developing a small modular reactor (SMR) with unique design features and arrangements that require testing to provide quality data for safety analysis codes and design validation, as well as for technology maturation. A multi-phase testing program is underway at NuScale to demonstrate that its unique helical coil steam generator design is not susceptible to flow-induced vibration during operation. The phases of the testing program include modal testing of individual tubes during test article fabrication and modal and flow testing after test article completion. NuScale has contracted SIET S.p.A. in Piacenza, Italy for the design and fabrication of the test article and test facility. In-fabrication testing was performed at the site of test article build in Cremosano, Italy. Modal testing and flow testing of the completed test article will be performed at SIET’s facilities in Piacenza. This paper discusses the design of the test article and test facility, including supporting systems, required to generate the quality data required to support NuScale’s comprehensive vibration assessment program as part of the overall licensing effort for NuScale’s first-of-a-kind small modular light water reactor.

Flow-induced vibration, helical coil, steam genera↗
DOE OSTI2022

A Semi-Empirical Correlation for the Onset of Density Wave Oscillations in a Helical Coil Steam Generator

NuScale Power has completed full length helical coil steam generator (HCSG) tests at SIET Laboratories in Piacenza, Italy. The test program included an investigation of the onset and evolution of density wave oscillations (DWO). This paper describes the mechanisms leading to the onset of DWO as inferred from tests performed in the full-height TF-2 counter-flow test facility. This research supports the concept that the onset of DWO is caused by liquid bridging inside the boiling length of the tubes. Using a separate cylinders approximation, a DWO onset correlation is obtained by performing a steady-state momentum balance on the density front created by liquid bridging. This yields a momentum balance equation in terms of a set of dimensionless superficial velocities, a corresponding dimensionless pressure drop term and an average void fraction. Envelope theory is then used to obtain a critical void fraction which is substituted into the dimensionless momentum balance to obtain a DWO onset correlation similar to the Wallis counter-current flooding correlation. A comparison of the DWO onset correlation to the TF-2 DWO experimental data is presented and shows excellent agreement when the average equilibrium vapor quality is greater than 0.2.

Density Wave Oscillations, Helical Coil Steam Gene↗
DOE OSTI2023

Cost-efficient and Scalable Nitration of Cyanoacetic Acid with Potassium Nitrate in Methanesulfonic Acid Gives Pure 3,4-Dicyanofuroxan Following Modified Steam Distillation Methodologies

Two issues exist in the preparation of 3,4-dicyanofuroxan (1, DCFO) by a nitration of cyanoacetic acid (CAA) with 100% of HNO 3 in trifluoroacetic acid (TFA) or in H 2 SO 4 /CH 2 Cl 2 : (1) the cost of 100% of HNO 3 and (2) the isolation and purification of the product. In this paper, we report a cost-efficient nitration methodology by replacing 100% of HNO 3 with KNO 3 in methanesulfonic acid (MSA). The methodology includes adding KNO 3 and CAA portionwise to the solution of MSA at 45-50 ºC and keeping total nitrating time < 90 mins; purifying the product using our newly developed Water-Co-Distilling process or Modified Steam Distillation at atmosphere pressure. Here, the methodology, in general, provided DCFO in 50-60% of yield with >99% of purity as identified by NMR and GC-MS.

3,4-dicyanofuroxan↗
DOE OSTI2024

Steam‐Assisted Selective CO 2 Hydrogenation to Ethanol over Ru−In Catalysts

Abstract Multicomponent catalysts can be designed to synergistically combine reaction intermediates at interfacial active sites, but restructuring makes systematic control and understanding of such dynamics challenging. We here unveil how reducibility and mobility of indium oxide species in Ru‐based catalysts crucially control the direct, selective conversion of CO 2 to ethanol. When uncontrolled, reduced indium oxide species occupy the Ru surface, leading to deactivation. With the addition of steam as a mild oxidant and using porous polymer layers to control In mobility, Ru−In 2 O 3 interface sites are stabilized, and ethanol can be produced with superior overall selectivity (70 %, rest CO). Our work highlights how engineering of bifunctional active ensembles enables cooperativity and synergy at tailored interfaces, which unlocks unprecedented performance in heterogeneous catalysts.

Zhou, Chengshuang↗
DOE OSTI2024

Steam-Assisted Selective CO 2 Hydrogenation to Ethanol over Ru–In Catalysts

Multicomponent catalysts can be designed to synergistically combine reaction intermediates at interfacial active sites, but restructuring makes systematic control and understanding of such dynamics challenging. In this work, we unveil how reducibility and mobility of indium oxide species in Ru-based catalysts crucially control the direct, selective conversion of CO 2 to ethanol. When uncontrolled, reduced indium oxide species occupy the Ru surface, leading to deactivation. With the addition of steam as a mild oxidant and using porous polymer layers to control In mobility, Ru–In 2 O 3 interface sites are stabilized, and ethanol can be produced with superior overall selectivity (70 %, rest CO). Our work highlights how engineering of bifunctional active ensembles enables cooperativity and synergy at tailored interfaces, which unlocks unprecedented performance in heterogeneous catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Bioinspired Dry‐Steam Superinsulation Straw Foam

Abstract Cellulosic materials offer sustainable advantages for building energy conservation. However, their development has been hindered by reduced thermal performance, often caused by structural collapse during the transition from solution to solid. Inspired by natural goose down, a bio‐based, lightweight insulation foam derived from agricultural waste straw is presented. Through in situ synthesis, bio‐silica fibers with branched structures capable of supporting hollow silica microspheres are fabricated. After steam‐mediated processing, the resulting foam exhibit low density (95 mg cm − 3 ), high porosity (95.5%), low thermal conductivity (0.03 ± 0.003 W mK −1 ), and a cyclic compressive strength of 90 kPa at 50% strain. Owing to the synergistic microstructure formed by branched bio‐fibers and hollow silica spheres, the bio‐silica foam exhibit outstanding thermal insulation performance relative to other bio‐based foams prepared by ambient drying. A passivated insulation panel is further developed by incorporating this material as the core component, achieving a thermal conductivity of 0.0275 W mk −1 and flexural strength of 6.85 MPa. The panel demonstrated durability with stable thermal performance throughout a 60‐day outdoor test. Moreover, the bio‐silica foam shows a carbon footprint of 7.50 kgCO₂ kg −1 at 70.2 wt.% silica, highlighting its promise as a sustainable insulation solution for green buildings.

Chemistry↗
DOE OSTI2021

Correlations of the Steam Oxidation Rate Constant of BWR Alloy Zircaloy-2 at 800–1400 °C

Steam oxidation experiments were conducted at 800–1400 °C with boiling water reactor alloy Zircaloy-2 strip specimens. Sample weight gain measurements were performed on the oxidized specimens before and after the test and were compared to oxygen pickup calculations using the Cathcart–Pawel correlation. The results showed that Zircaloy-2 follows the parabolic law at temperatures above 1000 °C. At or below 1000 °C, the oxidation rate was very low when compared to Cathcart–Pawel correlation and can be represented by a cubic expression. Arrhenius expressions are given to describe the parabolic rate constants at temperatures above 1000 °C and cubic rate constants are provided for temperatures at or below 1000 °C. Here, the weight gains calculated by our Arrhenius correlations are in excellent agreement with the measured sample weight gains at all test temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Non-thermal plasma-assisted steam methane reforming for electrically-driven hydrogen production

Plasma-assisted steam methane reforming (SMR) has become a promising approach for low temperature and small-scale hydrogen production. To increase H 2 yields, water-gas-shift reactions are needed to drive the formed CO to CO 2 and H 2 . In this study, bulk gas temperature, plasma power and water feed rate strongly impacted the CO and CO 2 product selectivity at high methane conversions of 60–80% in the presence of a Ni-based catalyst. CO 2 -enriched hydrogen could be formed directly with H 2 O/methane ratios > 4. To further increase the CO 2 /CO product selectivity, a “one-pot” cascade design with a Cu/ZnO/Al 2 O 3 /MgO catalyst bed placed downstream of the plasma zone achieved substantially higher CO 2 /CO selectivity (>15) in the effluent gas at 60% methane conversion and 300°C. Comparably, placing the Cu-based catalyst in the plasma zone does not alter the CO 2 /CO selectivity. Further, this study highlights the use of plasma reactor systems to directly tune the catalytic SMR performance and lead to an electrified route for hydrogen production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Enhancing methane production of anaerobic digested sewage sludge by advanced wet oxidation & steam explosion pretreatment

Anaerobic digestion (AD) of sewage sludge is associated with lowered carbon conversion efficiency due to the recalcitrance of microbial cells in the Waste Activated Sludge (WAS) from the aeration basins with 50 % of the dry weight still being present after AD. The effect of Advanced Wet Oxidation & Steam Explosion (AWOEx) pretreatment on the methane yield at variable temperatures (165–200 °C), residence time (15–45 min) and oxygen dosage (1%–10% based on VS concentration) was tested in this study. Central composite design (JMP® Pro) was used to design 19 runs of AWOEx pretreatment of dewatered digested sewage sludge (DADSS) at different operating conditions. After pretreatment the DADSS was fed to 19 bioreactors operated in semi-continues mode at 37 °C. The highest average methane yields of 183 mL/g VS and 170 mL/g VS were found for the bioreactors receiving DADSS pretreated at 165 °C with a retention time of 15 min and 10 % O2 (Condition 1), and, 182.5 °C with a retention time of 15 min and 5.5 % O2 (Condition 2). This corresponds to an increase in the methane production of 156.2 % and 140.5 % compared to the methane production from the DADSS without pretreatment.

09 BIOMASS FUELS↗
DOE OSTI2021

Comprehensive process and environmental impact analysis of integrated DBD plasma steam methane reforming

Utilization of electricity generated from renewable sources to obtain hydrogen, H 2 , is of critical importance to decrease the overall carbon footprint. Here in this work, integration of a dielectric discharge barrier (DBD) plasma reactor to convert low calorific value gas, such as landfill gas or coal mine gas into hydrogen, into the existing steam methane reforming (SMR) technology was evaluated using process design considerations. In particular, a DBD-enhanced catalytic SMR reactor was modeled to operate at near atmospheric pressure and 500 °C sequentially with the conventional reformer to obtain ~ 65 kmol/hr H2 for distributed production. This allowed decreasing the size of the conventional reformer albeit at the increased overall electricity consumption. Calculated process economics showed that only at an electricity cost of less than $0.004/kWh does the hybrid DBD plasma process derived H 2 price become competitive with that of the conventional SMR. A Life Cycle Assessment framework was used to compare environmental impacts from the conventional SMR, hybrid DBD SMR and hybrid DBD SMR utilizing only onshore wind-derived electricity. Larger environmental impacts in the plasma reformer were obtained due to the use of electricity for the plasma reforming operation, which was modeled as coming from the typical U.S. grid mix. Utilizing only 100% wind-derived electricity provided certain environmental benefits, except for the ecotoxicity impact where the wind power scenario modeled here only reduced ecotoxicity impacts associated with electricity by 30%.

08 HYDROGEN↗
DOE OSTI2025

Hydrogen-rich syngas production from the steam co-gasification of low-density polyethylene and coal refuse

Gasification provides a promising pathway for transforming waste materials into valuable products, such as fuels and chemicals. Here, this study investigates the steam co-gasification of low-density polyethylene (LDPE) and compressed thickener underflow, representative of coal refuse (CR), in a drop tube reactor. The effects of feed blend ratio (0–100 wt% LDPE) and temperature (800–1000 °C) on syngas composition, tar formation, and process efficiency are examined. The high volatility of LDPE makes it more reactive than CR but also promotes the formation of 2–7 ring aromatic tars. Increasing temperature improves carbon conversion efficiency (CCE), cold gas efficiency (CGE), and syngas yield, although the lower heating value (LHV) of syngas decreases. Hydrogen is the dominant gas product, reaching 59 vol% with the H 2 /CO molar ratio ranging from 2.27 to 4.74. Synergistic effects from alkali and alkali earth metals (AAEMs), particularly K and Ca, in CR ash enhance syngas yield by catalyzing char gasification and tar cracking. Hematite (Fe 2 O 3 ) and ash from sub-bituminous/bituminous coals are explored as tar reforming catalysts. Fe 2 O 3 achieves 100 % tar reforming efficiency, while coal ash, with a lower Fe 2 O 3 content (15 wt%), is less effective at cracking polycyclic aromatic hydrocarbons, particularly naphthalene. These findings demonstrate the flexibility of co-gasification, allowing precise tuning of syngas characteristics for specific downstream applications. Further optimization of waste-derived catalysts could enhance the economic viability of gasification in waste-to-energy processes.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2020

Mechanistic insights into the catalytic methanol steam reforming performance of Cu/ZrO 2 catalysts by in situ and operando studies

Here, we assessed the catalytic properties of the Cu/ZrO 2 interface in methanol and formaldehyde steam reforming (MSR and FSR) on powder catalysts by using a comparative approach with respect to the influence of the ZrO 2 polymorph support structure (monoclinic (m-)ZrO 2 vs. tetragonal (t-)ZrO 2 ), its synthesis routine and the choice of the precursor material on the CO 2 selectivity. Our studies reveal that ZrO 2 exhibits a pronounced versatility as a support material and its catalytic properties depend most strongly on its surface properties governed by its synthesis, especially by the choice of the Zr precursor. The way of combining the support with copper introduces an additional layer of complexity, but its influence on the MSR performance is limited to a modification of the conditions provided by the ZrO 2 support. Exploiting the comparative approach regarding the Cu-ZrO 2 catalysts in FSR and MSR – including the pure support materials – in combination with in situ Fourier transform infrared (FT-IR) spectroscopy shows that the CO observed in MSR on Cu/m-ZrO 2 can be attributed to a spillover of formaldehyde to the support. Side reactions of m-ZrO 2 are suppressed at lower temperatures due to its lack of highly reactive sites, resulting in a CO 2 -selective MSR performance. In Cu/t-ZrO 2 , however, the amount of CO is higher and a combination of a formaldehyde spillover to the support and a Cu-ZrO 2 phase boundary yielding CO leads to the lower CO 2 selectivity of these samples. An elevated number of defects and reactive Lewis acidic and Brønsted basic centers of t-ZrO 2 explains this increased activity towards side reactions in contrast to Cu/m-ZrO 2 catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗