Search NASA⌕ Search

SEARCH · Search NASA

Results for “strength (B)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Exploring the elastic and electronic properties of chromium molybdenum diboride alloys

We perform first-principles calculations to study the structural, mechanical, thermal, electronic, and magnetic properties of Cr 1-x Mo x B 2 for x = 0.25, 0.33, 0.50, 0.67 and 0.75. Based on structural search methods, we determine the ground-state structure for each concentration. The ternaries are either monoclinic (x = 0.25, 0.75) or trigonal (x = 0.33, 0.50, 0.67). The calculated mechanical properties reveal that the strength of Cr 1-x Mo x B 2 is maximized for x = 0.50. Cr 0.5 Mo 0.5 B 2 exhibits excellent mechanical properties (B = 298 GPa, Y = 558 GPa, G = 235 Gpa, ν = 0.19, H v =27 GPa), surpassing those of β-MoB 2 at a lower cost. All of these ternaries are hard alloys with Vickers hardness greater than 24 GPa. Chemical bonding analysis demonstrates that the strength of the new compounds is related to the alternating planar and buckled B-B layers, as well as the strong TM-B bonds. Finally, the enhanced strength of Cr 0.5 Mo 0.5 B 2 is a consequence of the high density of strong interlayer Cr-Mo metallic bonds around the Fermi level.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A continuum damage approach to spallation and the role of microinertia

Spall failure is of interest due to its prevalence in high strain rate problems in which the spallation is driven by the interaction of release waves. In this article, a porosity-based damage model that includes microinertial effects is used to examine spall failure. The model is successfully calibrated to plate impact-driven experiments and then used to evaluate experimental conditions producing more extreme strain rate conditions, such as those in laser-driven experiments. The incorporation of microinertia allows us to better understand the increase in apparent macroscopic spall strength seen at high strain rates. Correspondingly, we conclude that the incorporation of microinertial effects improves the model’s predictive capabilities. Microinertial effects result in more severe local tensile stresses that affect the damage evolution, and microinertia can play a significant role in the approach to the material’s ideal strength at extreme loading rates. Additionally, a preliminary parametric study is also carried out to investigate the role of microstructural aspects such as nucleation volume fraction and initial pore radius. One counter-intuitive result from the microinertial effects is that, for a given nucleation site volume fraction, having larger initial pore nucleation sites can lead to an improved macroscopic spall strength.

36 MATERIALS SCIENCE↗
NASA NTRS1972

Tensile failure criteria for fiber composite materials

The analysis provides insight into the failure mechanics of these materials and defines criteria which serve as tools for preliminary design material selection and for material reliability assessment. The model incorporates both dispersed and propagation type failures and includes the influence of material heterogeneity. The important effects of localized matrix damage and post-failure matrix shear stress transfer are included in the treatment. The model is used to evaluate the influence of key parameters on the failure of several commonly used fiber-matrix systems. Analyses of three possible failure modes were developed. These modes are the fiber break propagation mode, the cumulative group fracture mode, and the weakest link mode. Application of the new model to composite material systems has indicated several results which require attention in the development of reliable structural composites. Prominent among these are the size effect and the influence of fiber strength variability.

Rosen, B. W.↗
NASA NTRS1972

A stochastic model of the galactic magnetic field

Existing stochastic models of the galactic magnetic field are considered and found to suffer certain defects. A new model is proposed which overcomes faults of the previous theories while retaining their strengths.

Kaiser, T. B.↗
NASA NTRS1985

Fracture morphology of 2-D carbon-carbon composition

Out-of-plane tensile tests of a woven fabric carbon-carbon composite were performed in a scanning electron microscope equipped with a tensile stage and a videotape recording system. The composite was prepared from T-300 8-harness satin graphite fabric and a phenolic resin. The (0/90/0/90/0 sub 1/2) sub 2 laminate, with a Theta describing the orientation of the warp fibers of the fabric, was cured at 160 C and pyrolized at 871 C. This was followed by four cycles of resin impregnation, curing, and pyrolysis. A micrograph of the cross section of the composite is presented. Inspection of the specimen fracture surface revealed that the filaments had no residual matrix bonded to them. Further inspection revealed that the fracture was interlaminar in nature. Failure occurred where filaments of adjacent plies had the same orientation. Thus it is postulated that improvement in transverse tensile strength of 2-D carbon-carbon depends on the improvement of the filament-matrix bond strength.

Avery, W. B.↗
NASA NTRS1985

Options for improving rigidized ceramic heatshields

Studies regarding capabilities, tensile strength, and dimensional stability of fibrous ceramics, used in current thermal protection systems and those required for future NASA advanced transfer vehicles, are presented. It is shown that the use of smaller diameter (2-4 micron) aluminoborosilicate fibers (instead of conventional 11-micron size) in the FRCI composites improves the homogeneity and tensile strength of high-silica composite. Substitution of the smaller aluminoborosilicate fibers by 2-4-micron alumina fibers in the AETB composites improves the dimensional stability, at the expense of a substantial increase in the thermal expansion coefficient, with a potential decrease in tensile strength.

Leiser, D. B.↗
NASA NTRS1961

Fatigue Investigation of Full-Scale Wing Panels of 7075 Aluminum Alloy

Results are presented of a fatigue investigation conducted using 18 outer wing panels of T-29A airplanes. Constant-amplitude tests were performed using the resonant-frequency method at three different alternating load levels superposed on a 1 g, or level-flight mean load. Information is presented concerning crack location, cycles to crack initiation, crack propagation, and residual static strength.

Castle, Claude B.↗
NASA NTRS1978

Thermal environment effects on strength and impact properties of boron-aluminum composites

A systematic study was conducted regarding the degradation of fracture strength and impact energy in commercial B-Al composites in both static and cyclic thermal environments. The composites used in the study contained approximately 50 vol % boron fibers, unidirectionally aligned in either a 6061 Al or 1100 Al matrix. The tensile strengths of the composites after 3000 thermal cycles as a function of upper cycle temperature are presented in graphs. The temperature at which the strengths of 6061 Al matrix, B-Al composites were significantly degraded after 3000 cycles was noticeably higher than that for the 1100 Al matrix composites. Static heating at 420 C resulted in no significant strength degradation for the 6061 Al matrix composites. In the case of 1100 matrix composites, some degradation was observed at 420 C but markedly less than in the composites cycled to 420 C.

Grimes, H. H.↗
NASA NTRS1979

An oxide dispersion strengthened alloy for gas turbine blades

The strength of the newly developed alloy MA-6000E is derived from a nickel alloy base, an enlongated grain structure, naturally occurring precipitates of gamma prime, and an artificial distribution of extremely fine, stable oxide particles. Its composition is Ni-15% Cr-2% Mo-2% Ta-4% W-4.5% Al-2.5% Ti-0.15% Zr-0.05% C-0.01% B-1.1% Y2O3. It exhibits strength of a conventional nickel-base alloy at 1400 F, but is quite superior at 2000 F. Its shear strength is relatively low, necessitating consideration of special joining procedures. Its high-cycle, low-cycle, and thermal fatigue properties are excellent. The relationship between alloy micro-structure and properties is discussed.

Glasgow, T. K.↗
DOE OSTI2020

Emerging nuclear collectivity in 124-130 Te

The emergence of nuclear collectivity near doubly-magic 132Sn was explored along the stable, eveneven 124-130Te isotopes. Preliminary measurements of the B(E2; 41+ → 21+) transition strengths are reported from Coulomb excitation experiments primarily aimed at measuring the g factors of the 41+ states. Isotopically enriched Te targets were excited by 198-205 MeV 58Ni beams. A comparison of transition strengths obtained is made to large-scale shell-model calculations with successes and limitations discussed.

coombes, Ben↗
NASA NTRS1999

Parametric Study of Three-Stringer-Panel Compression-After-Impact Strength

Damage tolerance requirements for integrally-stiffened composite wing skins are typically met using design allowables generated by testing impact-damaged subcomponents, such as three-stringer stiffened panels. To improve these structures, it is necessary to evaluate the critical design parameters associated with three-stringer stiffened-panel compressive behavior. During recent research and development programs, four structural parameters were identified as sources for strength variation: (a) material system, (b) stringer configuration, (c) skin layup, and (d) form of axial reinforcement (tape versus pultruded carbon rods). Relative effects of these parameters on damage resistance and damage tolerance were evaluated numerically and experimentally. Material system and geometric configuration had the largest influence on damage resistance; location and extent of the damage zone influenced the sublaminate buckling behavior, failure initiation site, and compressive ultimate strength. A practical global-local modeling technique captured observed experimental behavior and has the potential to identify critical damage sites and estimate failure loads prior to testing. More careful consideration should be given to accurate simulation of boundary conditions in numerical and experimental studies.

Rousseau, Carl Q.↗
DOE OSTI2024

Artificial correlation heating in PIC simulations

The Particle-in-Cell (PIC) method, a cornerstone in plasma modeling, is widely employed for its ability to simulate kinetic phenomena in device-scale domains. Part of what makes this possible is that computational macroparticles represent many physical particles. It converges under certain constraints, including a grid spacing that resolves the Debye length and a time step small enough to respect the Courant–Friedrichs–Lewy condition and plasma frequency stability limit. Here, we introduce a new constraint necessary to avoid Artificial Correlation Heating (ACH). This requires that the macroparticle coupling strength be smaller than one, Γ ω < 1, where Γ ω ≡ Γω 2/3 ⁠, Γ = Z 2 e 2 /(4πε 0 ak B T) is the physical coupling strength, and w is the macroparticle weight. This is particularly relevant to 3D simulations of dense plasmas, which are becoming common with modern computing power. If this condition is violated, the finite macroparticle weight artificially enhances the coupling strength and causes the plasma to heat until the macroparticle coupling strength is near unity, depending on the grid resolution. A comprehensive model of ACH is developed that incorporates electron density, temperature, macroparticle weight, and grid resolution. It is then tested using PIC simulations, delineating the boundaries of the method's applicability and offering a predictive framework for ACH. Moreover, the research explores a runaway heating process induced by ACH in the presence of ionization, which can lead to numerical instability. A conclusion of this study is that the onset of ACH can impose a more stringent constraint on the macroparticle weight and average number of macroparticles per cell than what is typically expected, particularly in 3D simulations of dense plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Searching for anisotropic cosmic birefringence with polarization data from SPTpol

In this paper, we present a search for anisotropic cosmic birefringence in 500 deg 2 of southern sky observed at 150 GHz with the SPTpol camera on the South Pole Telescope. We reconstruct a map of cosmic polarization rotation anisotropies using higher-order correlations between the observed cosmic microwave background (CMB) E and B fields. We then measure the angular power spectrum of this map, which is found to be consistent with zero. The nondetection is translated into an upper limit on the amplitude of the scale-invariant cosmic rotation power spectrum, L ( L + 1 ) C L α α / 2 π < 0.10 × 10 – 4 rad 2 ( 0.033 deg 2 , 95% C.L.). This upper limit can be used to place constraints on the strength of primordial magnetic fields, B 1 Mpc < 17 nG (95% C.L.), and on the coupling constant of the Chern-Simons electromagnetic term g a γ < 4.0 × 10 – 2 / H I (95% C.L.), where H I is the inflationary Hubble scale. For the first time, we also cross-correlate the CMB temperature fluctuations with the reconstructed rotation angle map, a signal expected to be nonvanishing in certain theoretical scenarios, and find no detectable signal. We perform a suite of systematics and consistency checks and find no evidence for contamination.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1999

Capabilities and Limitations of Radio Occultation Measurements for Ionosphere Monitoring

The paper: (1) describes the range of capabilities of GPS radio occultation missions in ionospheric research: (a) ionospheric profiling; (b) ionospheric imaging; (c) ionospheric data assimilation; and (d) measurement of scintillation. (2) Identify strengths and weaknesses of measurements: (a) coverage; (b) resolution; and (c) uniqueness of solution.

Hajj, G. A.↗
NASA NTRS1993

Evidence of thermal metamorphism on the C, G, B, and F asteroids

Reflectance spectra (0.3 to 2.6 micrometers) of 14 C, G, B, and F asteroids and 21 carbonaceous chondrite powders are compared in detail. Only three thermally metamorphosed CM-CI chondrites that have a weak UV absorption are shown to have close counterparts among those asteroids. Reflectance spectra of heated Murchison CM2 chondrite are compared with the average C and G type asteroid spectra. Murchison heated at 600 to 1000 C exhibits a similar weak UV absorption and provides the best analog for those spectra. Comparison of UV absorption strengths between 160 C, G, B, and F asteroids and carbonaceous chondrites suggests that surface minerals of most of those asteroids are thermally metamorphosed at temperatures around 600 to 1000 C.

Hiroi, Takahiro↗