Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural complexity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

An Intrinsic Fiber-Optic Sensor for Structure Lightning Current Measurement

An intrinsic optical-fiber sensor based on Faraday Effect is developed that is highly suitable for measuring lightning current on aircraft, towers and complex structures. Originally developed specifically for aircraft installations, it is light-weight, non-conducting, structure conforming, and is immune to electromagnetic interference, hysteresis and saturation. It can measure total current down to DC. When used on lightning towers, the sensor can help validate other sensors and lightning detection network measurements. Faraday Effect causes light polarization to rotate when the fiber is exposed to a magnetic field in the direction of light propagation. Thus, the magnetic field strength can be determined from the light polarization change. By forming closed fiber loops and applying Ampere's law, measuring the total light rotation yields the total current enclosed. A broadband, dual-detector, reflective polarimetric scheme allows measurement of both DC component and AC waveforms with a 60 dB dynamic range. Two systems were built that are similar in design but with slightly different sensitivities. The 1310nm laser system can measure 300 A - 300 kA, and has a 15m long sensing fiber. It was used in laboratory testing, including measuring current on an aluminum structure simulating an aircraft fuselage or a lightning tower. High current capabilities were demonstrated up to 200 kA at a lightning test facility. The 1550nm laser system can measure 400 A - 400 kA and has a 25m fiber length. Used in field measurements, excellent results were achieved in the summer of 2012 measuring rocket-triggered lightning at the International Center for Lightning Research and Testing (ICLRT), Camp Blanding, Florida. In both systems increased sensitivity can be achieved with multiple fiber loops. The fiber optic sensor provides many unique capabilities not currently possible with traditional sensors. It represents an important new tool for lightning current measurement where low weight, complex shapes, large structure dimension, large current, and low frequency capabilities are important considerations.

Nguyen, Truong X.↗
NASA NTRS2003

Coronagraphic Observations of Optically Thin Debris Disks

We present the first observations of the debris disks around HD141569A and HD100546 made with the Advanced Camera for Surveys (ACS) Coronagraph. Both HD141569A and HD100546 are known to possess circumstellar disks with complex structures. HD141569A's disk was shown to exhibit a a gap from NICMOS observations, while HD100546 has been shown to exhibit a disk with spiral structure (Grady et al. 2001). The ACS observations were made as part of the GTO program to study the formation of planetary systems. The performance of the ACS Coronagraph meets pre-launch expectations, and allows us to achieve images with both unparalleled contrast and, a fully-sampled point spread function. We will present new, multi-color images of each object obtained with the F435W, F606W and F814W filters. These images present a significant improvement over the previous observations with NICMOS and STIS. We fully resolve the complex spiral structures observed within these disks and determine the true angular extent of the disks. Disk properties including color variations, disk asymmetries and morphology are determined. We discuss the formation history of these disks in the light of our new observations and review the evidence for the possibility that the systems harbor planets.

Clampin, Mark↗
NASA NTRS2003

Coronagraphic Observations of Optically Thin Debris Disks

We present the first observations of the debris disks around HD141569A and HD100546 made with the Advanced Camera for Surveys (ACS) Coronagraph. Both HD141569A and HD100546 are known to possess circumstellar disks with complex structures. HD141569A's disk was shown to exhibit a a gap from NICMOS observations (Weinberger et ai. 1999), while HD100546 has been shown to exhibit a disk with spiral strucure (Grady et ai. 2001). The ACS observations were made as part of the GTO program to study the formation of planetary systems. The performance of the ACS Coronagraph meets pre-launch expectations, and allows us t o achieve images with both unparalleled contrast and, a fully-sampled point spread function. We will present new, multi-color images of each object obtained with the F435W, F606W and F814W filters. These images present a significant improvement over the previous observations with NICMOS and STIS. We fully resolve the complex spiral structures observed within these disks and determine the true angular extent of the disks. Disk properties including color variations, disk asymmetries and morphology are determined. We discuss the formation history of these disks in the light of,our new observations and review the evidence for the possibility that the systems harbor planets.

Clampin, Mark↗
NASA NTRS1985

Computational structural mechanics: A new activity at the NASA Langley Research Center

Complex structures considered for the late 1980's and early 1990's include composite primary aircraft structures and the space station. These structures are much more difficult to analyze than today's structures and necessitate a major upgrade in computerized structural analysis technology. A major research activity in computational structural mechanics (CSM) was initiated. The objective of the CSM activity is develop advanced structural analysis technology that will exploit modern and emerging computers such as computers with vector and/or parallel processing capabilities. The three main research activities underway in CSM include: (1) structural analysis methods development; (2) a software testbed for evaluating the methods; and (3) numerical techniques for parallel processing computers. The motivation and objectives of the CSM activity are presented and CSM activity is described. The current CSM research thrusts, and near and long term CSM research thrusts are outlined.

Knight, N. F., Jr.↗
NASA NTRS2004

DNA in a Tunnel: A Comfy Spot for Recognition - or -The Structure of BsoBI Complexed with DNA. What can we Learn about Function via Structure Determination and how can this be Applied to Bone or Muscle Biology?

The structure and function of a biologically active molecule are related. To understand its function, it is necessary (but not always sufficient) to know the structure of the molecule. There are many ways of relating the molecular function with the structure. Mutation analysis can identify pertinent amino acids of an enzyme, or alternatively structure comparison of the of two similar molecules with different function may lead to understanding which parts are responsible for a functional aspect, or a series of "structural cartoons" - enzyme structure, enzyme plus substrate, enzyme with transition state analog, and enzyme with product - may give insight in the function of a molecule. As an example we will discuss the structure and function of the restriction enzyme BsoBI from Bacillus stearothemzophilus in complex with its cognate DNA. The enzyme forms a unique complex with DNA in that it completely encircles the DNA. The structure reveals the enzyme-DNA contacts, how the DNA is distorted compared with the canonical forms, and elegantly shows how two distinct DNA sequences can be recognized with the same efficiency. Based on the structure we may also propose a hypothesis how the enzymatic mechanism works. The knowledge gained thru studies such as this one can be used to alter the function by changing the molecular structure. Usually this is done by design of inhibitors specifically active against and fitting into an active site of the enzyme of choice. In the case of BsoBI one of the objectives of the study was to alter the enzyme specificity. In bone biology there are many candidates available for molecular study in order to explain, alter, or (temporarily) suspend activity. For example, the understanding of a pathway that negatively regulates bone formation may be a good target for drug design to stimulate bone formation and have good potential as the basis for new countermeasures against bone loss. In principle the same approach may aid muscle atrophy, radiation damage, immune response changes and other risks identified for long-duration Space travel.

vanderWoerd, Mark↗
NASA NTRS1983

The filaments of NGC 1275 - A collision between a galaxy and an accretion flow?

Morphological evidence is presented (in the form of 3-A-bandpass Fabry-Perot images made with a CCD camera) that the two bright emission-line systems seen toward the galaxy NGC 1275 arise from a high-velocity impact of a foreground galaxy upon the accretion flow of gas cooling in the center of the Perseus cluster. The uniquely high optical-line luminosity of NGC 1275, in comparison with other central galaxies in clusters observed to have cooling flows, may be explained by energy deposited during the collision. Using additional information from 21-cm and extinction measurements, a rough model of the interaction is developed. Problems remain with this model - such as the likelihood of a gas-rich system penetrating to the cluster center. The kinematic structure of the optically emitting gas shows additional complex structure near the nucleus of NGC 1275.

Kaaret, P.↗
NASA NTRS1987

Extension of vibrational power flow techniques to two-dimensional structures

In the analysis of the vibration response and structure-borne vibration transmission between elements of a complex structure, statistical energy analysis (SEA) or Finite Element Analysis (FEA) are generally used. However, an alternative method is using vibrational power flow techniques which can be especially useful in the mid- frequencies between the optimum frequency regimes for FEA and SEA. Power flow analysis has in general been used on one-dimensional beam-like structures or between structures with point joints. In this paper, the power flow technique is extended to two-dimensional plate like structures joined along a common edge without frequency or spatial averaging the results, such that the resonant response of the structure is determined. The power flow results are compared to results obtained using FEA at low frequencies and SEA at high frequencies. The agreement with FEA results is good but the power flow technique has an improved computational efficiency. Compared to the SEA results the power flow results show a closer representation of the actual response of the structure.

Cuschieri, J. M.↗
NASA NTRS1987

Power flow analysis of an L-shaped plate structure

In the analysis of the vibration response and structure-borne vibration transmission between elements of a complex structure, statistical energy analysis (SEA) or finite element analysis (FEA) are generally used. However, an alternative method is using vibrational power flow techniques which can be especially useful in the mid frequencies between the optimum frequency regimes for FEA and SEA. Power flow analysis has in general been used on one-dimensional beam-like structures or between structures with point joints. In this paper, the power flow technique is extended to two-dimensional plate like structures joined along a common edge without frequency or spatial averaging the results, such that the resonant response of the structure is determined. The power flow results are compared to results obtained using FEA at low frequencies and SEA at high frequencies. The agreement with FEA results is good but the power flow technique has an improved computational efficiency. Compared to the SEA results the power flow results show a closer representation of the actual response of the structure.

Cuschieri, J. M.↗
NASA NTRS1988

Extension of vibrational power flow techniques to two-dimensional structures

In the analysis of the vibration response and structure-borne vibration transmission between elements of a complex structure, statistical energy analysis (SEA) or finite element analysis (FEA) are generally used. However, an alternative method is using vibrational power flow techniques which can be especially useful in the mid frequencies between the optimum frequency regimes for SEA and FEA. Power flow analysis has in general been used on 1-D beam-like structures or between structures with point joints. In this paper, the power flow technique is extended to 2-D plate-like structures joined along a common edge without frequency or spatial averaging the results, such that the resonant response of the structure is determined. The power flow results are compared to results obtained using FEA results at low frequencies and SEA at high frequencies. The agreement with FEA results is good but the power flow technique has an improved computational efficiency. Compared to the SEA results the power flow results show a closer representation of the actual response of the structure.

Cuschieri, Joseph M.↗
NASA NTRS1992

Plasmasphere refilling - Recent observations and modeling

The phenomenon of plasmasphere refilling and general considerations of plasmasphere structure and plasmasphere-ionosphere coupling have received increased attention in recent years in terms of both observational considerations and modeling investigations. 'Global' observational and modeling studies of the plasmasphere structure are in the process of demonstrating the complex manner in which refilling and the spatial and temporal variations of convection interplay to produce complex structure in the plasmasphere; these studies are particularly timely as they could be extremely helpful for interpreting results from proposed imaging of plasmaspheric He(+). This review highlights the observational and theoretical/modeling progress during the past few years as well as introduces and places in context the particular contributions contained in this special section.

Singh, M.↗
NASA NTRS1991

Computational simulation of high temperature metal matrix composite behavior

Computational procedures were developed for simulating the thermal and mechanical behaviors of high-temperature metal-matrix composites (HT-MMCs) in the following application areas: (1) the behavior of HT-MMCs from micromechanics to laminate, (2) the structural response of HT-MMCs' simple and complex structural components, (3) the HT-MMC microfracture, and (4) the tailoring of HT-MMCs' behavior for optimum specific performances. Representative results are presented from each area of application, illustrating the effectiveness of the computational procedures.

Murthy, P. L. N.↗
NASA NTRS2003

Unsteady Probabilistic Analysis of a Gas Turbine System

In this work, we have considered an annular cascade configuration subjected to unsteady inflow conditions. The unsteady response calculation has been implemented into the time marching CFD code, MSUTURBO. The computed steady state results for the pressure distribution demonstrated good agreement with experimental data. We have computed results for the amplitudes of the unsteady pressure over the blade surfaces. With the increase in gas turbine engine structural complexity and performance over the past 50 years, structural engineers have created an array of safety nets to ensure against component failures in turbine engines. In order to reduce what is now considered to be excessive conservatism and yet maintain the same adequate margins of safety, there is a pressing need to explore methods of incorporating probabilistic design procedures into engine development. Probabilistic methods combine and prioritize the statistical distributions of each design variable, generate an interactive distribution and offer the designer a quantified relationship between robustness, endurance and performance. The designer can therefore iterate between weight reduction, life increase, engine size reduction, speed increase etc.

Brown, Marilyn↗
NASA NTRS1982

Computational Aspects of Heat Transfer in Structures

Techniques for the computation of heat transfer and associated phenomena in complex structures are examined with an emphasis on reentry flight vehicle structures. Analysis methods, computer programs, thermal analysis of large space structures and high speed vehicles, and the impact of computer systems are addressed.

Adelman, H. M.↗
NASA NTRS1984

Multiobjective optimization techniques for structural design

The multiobjective programming techniques are important in the design of complex structural systems whose quality depends generally on a number of different and often conflicting objective functions which cannot be combined into a single design objective. The applicability of multiobjective optimization techniques is studied with reference to simple design problems. Specifically, the parameter optimization of a cantilever beam with a tip mass and a three-degree-of-freedom vabration isolation system and the trajectory optimization of a cantilever beam are considered. The solutions of these multicriteria design problems are attempted by using global criterion, utility function, game theory, goal programming, goal attainment, bounded objective function, and lexicographic methods. It has been observed that the game theory approach required the maximum computational effort, but it yielded better optimum solutions with proper balance of the various objective functions in all the cases.

Rao, S. S.↗
NASA NTRS2022

Structural and chemical complexity of minerals: An update

The complexities of chemical composition and crystal structure are fundamental characteristics of minerals that have high relevance to the understanding of their stability, occurrence and evolution. This review summarises recent developments in the field of mineral complexity and outlines possible directions for its future elaboration. The database of structural and chemical complexity parameters of minerals is updated by H-correction of structures with unknown H positions and the inclusion of new data. The revised average complexity values (arithmetic means) for all minerals are 3.54(2) bits/atom and 345(10) bits/cell (based upon 4443 structure reports). The distributions of atomic information amounts, chemIG and strIG, versus the number of mineral species fit the normal modes, whereas the distributions of total complexities, chemIG,total and strIG,total, along with numbers of atoms per formula and per unit cell are log normal. The three most complex mineral species known today are ewingite, morrisonite and ilmajokite, all either discovered or structurally characterised within the last five years. The most important complexity-generating mechanisms in minerals are: (1) the presence of isolated large clusters; (2) the presence of large clusters linked together to form three-dimensional frameworks; (3) formation of complex three-dimensional modular frameworks; (4) formation of complex modular layers; (5) high hydration state in salts with complex heteropolyhedral units; and (6) formation of ordered superstructures of relatively simple structure types. The relations between symmetry and complexity are considered. The analysis of temporal dynamics of mineralogical discoveries since 1875 with the step of 25 years show the increasing chemical and structural complexities of human knowledge of the mineral kingdom in the history of mineralogy. In the Earth’s history, both diversity and complexity of minerals experience dramatic increases associated with the formation of Earth’s continental crust, initiation of plate tectonics and the Great Oxidation event.

complexity↗
NASA NTRS1978

Computer program for determining mass properties of a rigid structure

A computer program was developed for the rapid computation of the mass properties of complex structural systems. The program uses rigid body analyses and permits differences in structural material throughout the total system. It is based on the premise that complex systems can be adequately described by a combination of basic elemental shapes. Simple geometric data describing size and location of each element and the respective material density or weight of each element were the only required input data. From this minimum input, the program yields system weight, center of gravity, moments of inertia and products of inertia with respect to mutually perpendicular axes through the system center of gravity. The program also yields mass properties of the individual shapes relative to component axes.

Hull, R. A.↗
NASA NTRS1986

PACOSS program overview and status

Many future civilian and military large space structures (LSS) will have as performance objectives stringent pointing accuracies, short settling times, relatively fast response requirements, or combinations thereof. Many of these structures will be large, light weight, and will exhibit high structural modal density at low frequency and within the control bandwidth. Although it is possible in principle to achieve structural vibration control through purely active means, experience with complex structures has shown that the realities of plant model inaccuracies and sensor/actuator dynamics frequently combine to produce substandard performance. A more desirable approach is to apply passive damping technology to reduce the active control burden. Development of the technology to apply this strategy is the objective of the PACOSS (Passive and Active Control OF Space Structures) program. A key element in the PACOSS program is the Representative System Article (RSA). The RSA is a generic paper system that serves as a testbed for damping and controls studies. It also serves as a basis for design of the smaller Dynamic Test Article (DTA), a hardware testbed for the laboratory validation of analysis and design practices developed under PACOSS.

Rogers, L. C.↗