Application of a systematic finite-element model modification technique to dynamic analysis of structures
For abstract see A82-30178.
Robinson, J. C.↗
SEARCH · Search NASA
Results for “structural modification”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Exploratory investigation of the structure of the tip vortex of a semispan wing for several wing-tip modifications
Wind tunnel investigation of tip vortex structure of semispan wing for several wing-tip modifications
Scheiman, J.↗
Modification of Planck Blackbody Radiation by Photonic Band-Gap Structures
We discuss a simple ID model of the modification of Planck blackbody radiation by photonic band-gap materials (PBGs).
photonic↗
Flow Quality Survey of the 8- by 6-Foot Supersonic Wind Tunnel (2015 Test) Prior to the 9- by 15-Foot Acoustic Low-Speed Wind Tunnel Acoustic Improvement Modifications
Prior to the NASA Glenn Research Center 9- by 15-Foot Low-Speed Wind Tunnel (9x15 LSWT) undergoing significant structural and acoustic modifications beginning in 2017, a flow quality survey (FQS) was conducted to characterize the flow quality of the 8- by 6-Foot Supersonic Wind Tunnel (8x6 SWT) test section and facility air dryer. The data from this FQS will be compared to data collected during a FQS following the completion of the 9x15 LSWT Acoustic Improvement Modifications. This document contains only the FQS data collected in November 2015 using the 16-inch-diameter cone cylinder and a set of twenty air dryer bed wind anemometers. The ability to reach the extents of the 8x6 SWT operating envelope with a large blockage model was verified through the 16-inch-diameter cone cylinder tests. The flow uniformity and angularity at the entrance of the facility air dryer was assessed and quantified using the air dryer bed wind anemometers.
Flow Quality Survey↗
The Deep Structure of Lunar Basins: Clues to the Understanding of Basin Formation and Modification
Basin excavation has played a major role in shaping the surface and subsurface of the Moon. Though photogeologic observations provide estimates for the present volumes of lunar impact basins and their ejecta deposits, there is not sufficient information to describe completely either the geometry of the basins at the time of impact or their modification with time. Determination of the structure of the crust and upper mantle beneath large basins can provide important insight into the thermal and mechanical processes associated with basin formation and modification as well as the differences in these processes as functions of basin age and size. Using observed gravity and topography together with the seismically determined crustal thickness of the central nearside, a model for the structure of the crust and upper mantle of the nearside of the Moon is presented. With this model the deep structure of the largest lunar basins are compared. The implications for the processes of basin formation and modification at different stages in lunar history are explored.
Bratt, S. R.↗
NASTRAN modifications for recovering strains and curvatures
Modifications to the NASTRAN structural analysis computer program are described. The modifications allow the recovery of strain and curvature data for the general two-dimensional elements, in addition to the usual stress data. Option features allow the transformation of the strain/curvature (or stress) data to a common coordinate system and representation at the grid points of the structural model rather than at the conventional element center locations. Usage information is provided which will allow present users of NASTRAN to easily utilize the new capability.
Hennrich, C. W.↗
Probabilistic Structural Analysis of the Solid Rocket Booster Aft Skirt External Fitting Modification
NASA has funded several major programs (the Probabilistic Structural Analysis Methods Project is an example) to develop probabilistic structural analysis methods and tools for engineers to apply in the design and assessment of aerospace hardware. A probabilistic finite element software code, known as Numerical Evaluation of Stochastic Structures Under Stress, is used to determine the reliability of a critical weld of the Space Shuttle solid rocket booster aft skirt. An external bracket modification to the aft skirt provides a comparison basis for examining the details of the probabilistic analysis and its contributions to the design process. Also, analysis findings are compared with measured Space Shuttle flight data.
Townsend, John S.↗
Effects of High Dietary HEME Iron and Radiation on Cardiovascular Function
The radiation related health risks to astronauts is of particular concern to NASA. Data support that exposure to radiation is associated with a number of disorders including a heightened risk for cardiovascular diseases. Independent of radiation, altered nutrient status (e.g. high dietary iron) also increases ones risk for cardiovascular disease. However, it is unknown whether exposure to radiation in combination with high dietary iron further increases ones cardiovascular risk. The intent of our proposal is to generate compulsory data examining the combined effect of radiation exposure and iron overload on sensitivity to radiation injury to address HRP risks: 1) Risk Factor of Inadequate Nutrition; 2) Risk of Cardiac Rhythm Problems; and 3) Risk of Degenerative Tissue or other Health Effects from Space Radiation. Towards our goal we propose two distinct pilot studies using the following specific aims: Vascular Aim 1: To determine the short-term consequences of the independent and combined effects of exposure to gamma radiation and elevated body iron stores on measures of endothelial function and cell viability and integrity. We hypothesize that animals that have high body iron stores and are exposed to gamma radiation will show a greater reduction in endothelial dependent nitric oxid production and larger pathological changes in endothelial integrity than animals that have only 1 of those treatments (either high iron stores or exposure to gamma radiation). Vascular Aim 2: Identify and compare the effects of gamma radiation and elevated body iron stores on the genetic and epigenetic regulation of proteins associated with endothelial cell function. We hypothesize that modifications of epigenetic control and posttranslational expression of proteins associated with endothelial cell function will be differentially altered in rats with high body iron stores and exposed to gamma radiation compared to rats with only 1 type of treatment. Cardiac Aim 1: To determine the short-term consequences of the independent and combined effects of gamma radiation and elevated body iron stores on measures of cardiac structure. We hypothesize that modifications to cardiac structure and function will be greater in rats with high body iron stores and exposed to gamma radiation than in rats that have only 1 of those treatments. Cardiac Aim 2: Identify and compare the effects of gamma radiation and elevated body iron stores on the genetic and epigenetic regulation of proteins associated with cardiac structure and function. We hypothesize that modifications of epigenetic control and posttranslational expression of proteins associated with cardiac contractile function will be differentially altered in rats with high body iron stores and exposed to gamma radiation compared to rats with only 1 type of treatment.
Westby, Christian M.↗
High Speed Crystal Growth by Q-switched Laser Melting
The modification of the structural and electrical properties of semiconductors short radiation pulses obtained from Q-switched lasers is described. These modifications are accomplished by high heating and cooling rates. This processing revealed novel crystal growth and high speed resolidification phenomena. The behavior of semiconductor Si is analyzed. The annealing process typically employs short pulses of radiation in or near the visible region of the spectrum. The Q-switched ruby and Nd-YAG lasers are commonly used and these are sometimes mode locked to reduce the pulse length still further. Material to be annealed can be processed with a single large area radiation spot. Alternatively, a small radiation spot size can be used and a large sample area is covered by overlapping irradiated regions.
Cullis, A. G.↗
Probabilistic Structural Analysis of the SRB Aft Skirt External Fitting Modification
NASA has funded several major programs (the PSAM Project is an example) to develop Probabilistic Structural Analysis Methods and tools for engineers to apply in the design and assessment of aerospace hardware. A probabilistic finite element design tool, known as NESSUS, is used to determine the reliability of the Space Shuttle Solid Rocket Booster (SRB) aft skirt critical weld. An external bracket modification to the aft skirt provides a comparison basis for examining the details of the probabilistic analysis and its contributions to the design process.
Townsend, John S.↗
Flow Quality Survey of the 9- by 15-Foot Low Speed Wind Tunnel (2015 and 2016 Tests) Prior to Acoustic Improvement Modifications
A flow quality survey (FQS) was conducted in December 2015 and January 2016 to characterize the flow quality of the 9- by 15-Foot Low-Speed Wind Tunnel (9×15 LSWT) test section prior to the start of significant structural and acoustic modifications. The data from this FQS will be compared with data collected during a replicated FQS after completion of the acoustic improvement modifications. This document contains only the FQS data collected in December 2015 and January 2016 using the 15-ft survey rake and the 18-in. boundary layer rakes in the 9×15 LSWT. The spatial variation at one axial test section station (TSTA), nominally TSTA 198, and five vertical heights of the 15-ft survey rake was computed for Mach number, velocity, total and static pressure, total temperature, and flow angularity (pitch and yaw). Three hot-wire probes mounted to the 15-ft survey rake were used to measure turbulence intensity; however, data from a previous test entry were used as the mean turbulence intensity baseline value, as there were issues with the hot-wire performance. The boundary layer pressure profiles around the perimeter of the test section at TSTA 199 were also measured and the boundary layer heights computed. All calculated results are tabulated for each facility condition set point.
Johnson, Aaron M.↗
Design oriented structural analysis.
Recent developments in computer-aided structural design indicate a need for computerized structural analysis techniques which are efficient for the repetitive analysis of large complex structures undergoing design modifications. This paper describes such a technique based on a Taylor series approach. Results are presented for an idealized aircraft fuselage midsection to demonstrate the efficiency and accuracy of the technique. The results show that satisfactory analyses of modified structures may be obtained with the proposed technique, even for large changes in member sizes, for only a small fraction of the computational cost of a full reanalysis.
Storaasli, O. O.↗
Vehicle systems design optimization study
The optimum vehicle configuration and component locations are determined for an electric drive vehicle based on using the basic structure of a current production subcompact vehicle. The optimization of an electric vehicle layout requires a weight distribution in the range of 53/47 to 62/38 in order to assure dynamic handling characteristics comparable to current internal combustion engine vehicles. Necessary modification of the base vehicle can be accomplished without major modification of the structure or running gear. As long as batteries are as heavy and require as much space as they currently do, they must be divided into two packages, one at front under the hood and a second at the rear under the cargo area, in order to achieve the desired weight distribution. The weight distribution criteria requires the placement of batteries at the front of the vehicle even when the central tunnel is used for the location of some batteries. The optimum layout has a front motor and front wheel drive. This configuration provides the optimum vehicle dynamic handling characteristics and the maximum passenger and cargo space for a given size vehicle.
Gilmour, J. L.↗
Automated tuning of airframe vibration by structural optimization
Numerical optimization techniques are used to modify the dynamic response at a specified point(s) of a helicopter airframe structure due to a steady state narrow band excitation. Calculation of steady state vibration amplitude is reduced to the solution of linear equations with complex coefficients. The sensitivity of the dynamic amplitudes with respect to the structural parameter perturbations can be computed with the same technique as the one used in the static displacement sensitivity without requiring eigenvector sensitivity. Approximate models for critical structural responses are created based on the sensitivity data to reduce the amount of computational effort and to enable the design of structures of practical scale and complexity. This approach is general in that it accommodates static, dynamic, and frequency constraints simultaneously as long as their computational models are available. It can be used in optimizing mass distribution as well as stiffness modifications of practical structures.
Miura, H.↗
Optimal Composite Material for Low Cost Fabrication of Large Composite Aerospace Structures using NASA Resins or POSS Nanoparticle Modifications
Thermoplastic laminates in situ consolidated via tape or tow placement require full mechanical properties. Realizing full properties requires resin crystallinity to be controlled - partial crystallinity leads to unacceptably low laminate compression properties. There are two approaches: utilize an amorphous matrix resin; or place material made from a semi-crystalline resin featuring kinetics faster than the process. In this paper, a matrix resin evaluation and trade study was completed with commercial and NASA amorphous polyimides on the one hand, and with PEKK mixed with POSS nanoparticles for accelerated crystallinity growth on the other. A new thermoplastic impregnated material, 6 mm wide (0.25-in) AS-4 carbon/LaRC(TradeMark)8515 dry polyimide tow, was fabricated. Since LaRC(TradeMark)8515 is fully amorphous, it attains full properties following in situ consolidation, with no post processing required to build crystallinity. The tow in situ processing was demonstrated via in situ thermoplastic filament winding it into rings.
Lamontia, Mark A.↗
Effects of oxygen stoichiometry on the scaling behaviors of YBa2Cu3O(x) grain boundary weak-links
The effects of oxygen stoichiometry on the transport properties of the pulsed laser deposited YBa2Cu3O(x) bicrystalline grain boundary weak-link junctions were studied. It is found that not only the cross boundary resistive transition foot structure can be manipulated repeatedly with oxygen annealing processes but the junction behaviors are also altered in accordance. In the fully oxygenated state i.e with x = 7.0 in YBa2Cu3O(x) stoichiometry, the junction critical current exhibits a power of 2 scaling behavior with temperature. In contrast, when annealed in the conditions of oxygen-deficient state (e.g with x = 6.9 in YBa2Cu3O(x) stoichiometry) the junction critical current switches to a linear temperature dependence behavior. The results are tentatively attributed to the modification of the structure in the boundary area upon oxygen annealing, which, in turn, will affect the effective dimension of the geometrically constrained weak-link bridges. The detailed discussion on the responsible physical mechanisms as well as the implications of the present results on device applications will be given.
Wu, K. H.↗
Optics-Only Calibration of a Neural-Net Based Optical NDE Method for Structural Health Monitoring
A calibration process is presented that uses optical measurements alone to calibrate a neural-net based NDE method. The method itself detects small changes in the vibration mode shapes of structures. The optics-only calibration process confirms previous work that the sensitivity to vibration-amplitude changes can be as small as 10 nanometers. A more practical value in an NDE service laboratory is shown to be 50 nanometers. Both model-generated and experimental calibrations are demonstrated using two implementations of the calibration technique. The implementations are based on previously published demonstrations of the NDE method and an alternative calibration procedure that depends on comparing neural-net and point sensor measurements. The optics-only calibration method, unlike the alternative method, does not require modifications of the structure being tested or the creation of calibration objects. The calibration process can be used to test improvements in the NDE process and to develop a vibration-mode-independence of damagedetection sensitivity. The calibration effort was intended to support NASA s objective to promote safety in the operations of ground test facilities or aviation safety, in general, by allowing the detection of the gradual onset of structural changes and damage.
Decker, Arthur J.↗
Ceruloplasmin and cardiovascular disease
Transition metal ion-mediated oxidation is a commonly used model system for studies of the chemical, structural, and functional modifications of low-density lipoprotein (LDL). The physiological relevance of studies using free metal ions is unclear and has led to an exploration of free metal ion-independent mechanisms of oxidation. We and others have investigated the role of human ceruloplasmin (Cp) in oxidative processes because it the principal copper-containing protein in serum. There is an abundance of epidemiological data that suggests that serum Cp may be an important risk factor predicting myocardial infarction and cardiovascular disease. Biochemical studies have shown that Cp is a potent catalyst of LDL oxidation in vitro. The pro-oxidant activity of Cp requires an intact structure, and a single copper atom at the surface of the protein, near His(426), is required for LDL oxidation. Under conditions where inhibitory protein (such as albumin) is present, LDL oxidation by Cp is optimal in the presence of superoxide, which reduces the surface copper atom of Cp. Cultured vascular endothelial and smooth muscle cells also oxidize LDL in the presence of Cp. Superoxide release by these cells is a critical factor regulating the rate of oxidation. Cultured monocytic cells, when activated by zymosan, can oxidize LDL, but these cells are unique in their secretion of Cp. Inhibitor studies using Cp-specific antibodies and antisense oligonucleotides show that Cp is a major contributor to LDL oxidation by these cells. The role of Cp in lipoprotein oxidation and atherosclerotic lesion progression in vivo has not been directly assessed and is an important area for future studies.
NASA Discipline Cell Biology↗