Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural response”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

A study of the structural-acoustic response and interior noise levels of fuselage structures

Models of both flat and curved fuselage panels were tested for their sound transmission characteristics. The effect of external air flow on transmission loss was simulated in a subsonic wind-tunnel. By numerically evaluating the known equations for field-incidence transmission loss of single-walled panels in a computer program, a comparison of the theory with the test results was made. As a further extension to aircraft fuselage simulation, equations for the field-incidence transmission loss of a double-walled panel were derived. Flow is shown to provide a small increase in transmission loss for a flat panel. Curvature is shown to increase transmission loss for low frequencies, while also providing a sharp decrease in transmission loss at the ring frequency of the cylindrical panel. The field-incidence transmission loss of a double-walled panel was found to be approximately twice that for a single-walled panel, with the addition of dips in the transmission loss at the air gap resonances and at the critical frequency of the internal panel.

Koval, L. R.↗

Active control of nonlinear-nonstationary response and radiation of a panel-stringer structure near a supersonic jet

This paper is on the control of nonlinear-nonstationary vibration of an aircraft-type frame-stringer structure and the acoustic radiation resulting from high levels of excitation by a nearby supersonic model jet exhaust. The objective of the control is to reduce the acoustic fatigue and the interior noise in a high-speed aircraft. Control of the structural response is achieved by actively forcing the structure with an actuator at the shock oscillation frequency whose amplitude is locked into a self-control cycle. This controller follows the amplitude modulation that results from the rotation and counter-rotation of the jet column. Results show that the peak level of the power in the structural response due to shock impingement is reduced by a factor of 63, corresponding to a power level reduction of 18 dB. As a result, new broadband components emerge with at least four harmonics contributing to the broadening of the response spectrum. At accelerating and decelerating supersonic speeds, the exhaust from the jet induces higher transient loading on the nearby flexible structure due to the occurrence of multiple shocks from the jet.

Maestrello, Lucio↗

SRM attrition rate study of the aft motor case segments due to water impact cavity collapse loading

The attrition assessment of the aft segments of Solid Rocket Motor due to water impact requires the establishment of a correlation between loading occurrences and structural capability. Each discrete load case, as identified by the water impact velocities and angle, varies longitudinally and radially in magnitude and distribution of the external pressure. The distributions are further required to be shifted forward or aft one-fourth the vehicle diameter to assure minimization of the effect of test instrumentation location for the load determinations. The asymmetrical load distributions result in large geometric nonlinearities in structural response. The critical structural response is progressive buckling of the case. Discrete stiffeners have been added to these aft segments to aid in gaining maximum structural capability for minimum weight addition for resisting these loads. This report presents the development of the attrition assessment of the aft segments and includes the rationale for eliminating all assessable conservatisms from this assessment.

Crockett, C. D.↗

The use of the Wigner Distribution to analyze structural impulse responses

In this paper it is argued that the time-frequency analysis of structural impulse responses may be used to reveal the wave types carrying significant energy through a structure. Since each wave type is characterized by its own dispersion relation, each wave type may be associated with particular features appearing in the time-frequency domain representation of an impulse response. Here the Wigner Distribution is introduced as a means for obtaining appropriate time-frequency representations of impulse responses. Practical aspects of the calculation of the Wigner Distribution are discussed and examples of its application to the analysis of structural impulse responses are given. These examples will show that the Wigner Distribution may be conveniently used to distinguish between the contributions of various waves types to a total structural response.

Wahl, T. J.↗

Performance of Optimized Actuator and Sensor Arrays in an Active Noise Control System

Experiments have been conducted in NASA Langley's Acoustics and Dynamics Laboratory to determine the effectiveness of optimized actuator/sensor architectures and controller algorithms for active control of harmonic interior noise. Tests were conducted in a large scale fuselage model - a composite cylinder which simulates a commuter class aircraft fuselage with three sections of trim panel and a floor. Using an optimization technique based on the component transfer functions, combinations of 4 out of 8 piezoceramic actuators and 8 out of 462 microphone locations were evaluated against predicted performance. A combinatorial optimization technique called tabu search was employed to select the optimum transducer arrays. Three test frequencies represent the cases of a strong acoustic and strong structural response, a weak acoustic and strong structural response and a strong acoustic and weak structural response. Noise reduction was obtained using a Time Averaged/Gradient Descent (TAGD) controller. Results indicate that the optimization technique successfully predicted best and worst case performance. An enhancement of the TAGD control algorithm was also evaluated. The principal components of the actuator/sensor transfer functions were used in the PC-TAGD controller. The principal components are shown to be independent of each other while providing control as effective as the standard TAGD.

Palumbo, D. L.↗

Performance of Optimized Actuator and Sensor Arrays in an Active Noise Control System

Experiments have been conducted in NASA Langley s Acoustics and Dynamics Laboratory to determine the effectiveness of optimized actuator/sensor architectures and controller algorithms for active control of harmonic interior noise. Tests were conducted in a large scale fuselage model - a composite cylinder which simulates a commuter class aircraft fuselage with three sections of trim panel and a floor. Using an optimization technique based on the component transfer functions, combinations of 4 out of 8 piezoceramic actuators and 8 out of 462 microphone locations were evaluated against predicted performance. A combinatorial optimization technique call tabu search was employed to select the optimum transducer arrays. Three test frequencies represent the cases of a strong acoustic and strong structural response, a weak acoustic and strong structural response and a strong acoustic and weak structural response. Noise reduction was obtained using a Time Averaged/Gradient Descent (TAGD) controller. Results indicate that the optimization technique successfully predicted best and worst case performance. An enhancement of the TAGD control algorithm was also evaluated. The principal components of the actuator/sensor transfer functions were used in the PC-TAGD controller. The principal components are shown to be independent of each other while providing control as effective as the standard TAGD.

Palumbo, D. L.↗

Nonisothermal elasto-visco-plastic response of shell-type structures

A mathematical model and solution methodologies for analyzing structural response of thin, metallic shell-type structures under large transient, cyclic or static thermomechanical loads is disussed. Among the system responses, which are associated with these load conditions, are thermal buckling and creep buckling. Thus, geometric as well as material-type nonlinearities (of high order) can be anticipated and have been considered in the development of the mathematical model. Furthermore, this was accommodated in the solution procedures. A complete true ab-inito rate theory of kinematics and kinetics for continuum and curved thin structures, without any restriction on the magnitude of the strains or the deformation, was formulated. The time dependence and large strain behavior are incorporated through the introduction of the time rates of the metric and curvature in two coordinate systems, a fixed (spatial) one and a convected (material) coordinate system. The relations between the time derivative and the covariant derivatives (gradients) have been developed for curved space and motion, so that the velocity components supply the connection between the equations of motion and the time rate of change of the metric and curvature tensors.

Simitses, G. J.↗

Analysis of simple 2-D and 3-D metal structures subjected to fragment impact

Theoretical methods were developed for predicting the large-deflection elastic-plastic transient structural responses of metal containment or deflector (C/D) structures to cope with rotor burst fragment impact attack. For two-dimensional C/D structures both, finite element and finite difference analysis methods were employed to analyze structural response produced by either prescribed transient loads or fragment impact. For the latter category, two time-wise step-by-step analysis procedures were devised to predict the structural responses resulting from a succession of fragment impacts: the collision force method (CFM) which utilizes an approximate prediction of the force applied to the attacked structure during fragment impact, and the collision imparted velocity method (CIVM) in which the impact-induced velocity increment acquired by a region of the impacted structure near the impact point is computed. The merits and limitations of these approaches are discussed. For the analysis of 3-d responses of C/D structures, only the CIVM approach was investigated.

Witmer, E. A.↗

Mapping methods for computationally efficient and accurate structural reliability

The influence of mesh coarseness in the structural reliability is evaluated. The objectives are to describe the alternatives and to demonstrate their effectiveness. The results show that special mapping methods can be developed by using: (1) deterministic structural responses from a fine (convergent) finite element mesh; (2) probabilistic distributions of structural responses from a coarse finite element mesh; (3) the relationship between the probabilistic structural responses from the coarse and fine finite element meshes; and (4) probabilistic mapping. The structural responses from different finite element meshes are highly correlated.

Shiao, Michael C.↗

High-temperature combustor liner tests in structural component response test facility

Jet engine combustor liners were tested in the structural component response facility at NASA Lewis. In this facility combustor liners were thermally cycled to simulate a flight envelope of takeoff, cruise, and return to idle. Temperatures were measured with both thermocouples and an infrared thermal imaging system. A conventional stacked-ring louvered combustor liner developed a crack at 1603 cycles. This test was discontinued after 1728 cycles because of distortion of the liner. A segmented or float wall combustor liner tested at the same heat flux showed no significant change after 1600 cycles. Changes are being made in the facility to allow higher temperatures.

Moorhead, Paul E.↗

Probabilistic Structural Analysis Methods (PSAM) for select space propulsion system components, part 2

The technical effort and computer code enhancements performed during the sixth year of the Probabilistic Structural Analysis Methods program are summarized. Various capabilities are described to probabilistically combine structural response and structural resistance to compute component reliability. A library of structural resistance models is implemented in the Numerical Evaluations of Stochastic Structures Under Stress (NESSUS) code that included fatigue, fracture, creep, multi-factor interaction, and other important effects. In addition, a user interface was developed for user-defined resistance models. An accurate and efficient reliability method was developed and was successfully implemented in the NESSUS code to compute component reliability based on user-selected response and resistance models. A risk module was developed to compute component risk with respect to cost, performance, or user-defined criteria. The new component risk assessment capabilities were validated and demonstrated using several examples. Various supporting methodologies were also developed in support of component risk assessment.

Source record↗

Publications in acoustics and noise control from the NASA Langley Research Center during 1940-1976

Reference lists are presented of published research papers in various areas of acoustics and noise control for the period 1940-1976. The references are listed chronologically and are grouped under the following general headings: (1) Duct acoustics; (2) propagation and operations; (3) rotating blade noise; (4) jet noise; (5) sonic boom; (6) flow-surface interaction noise; (7) human response; (8) structural response; (9) prediction; and (10) miscellaneous.

Fryer, B. A.↗

Application of concurrent processing to structural dynamic response computations

Described are the experiences gained from solving for the dynamic response of two simple structures on an experimental Multiple Instruction Multiple Data (MIMD) computer called the finite element machine. Introduced are MIMD computing concepts, describing how the concurrent algorithmic techniques implemented and giving results for the two example problems. The results show computational speedups of up to 7.83 using eight of the finite element machine processors and indicate that significant computational speedups are possible for large order structural computations.

Ransom, J.↗

Mechanoregulation of Proliferation, Differentiation, Senescence and Survival of Bone Marrow Primary Osteoprecursor Cells

Cell and animal studies conducted onboard the International Space Station and during the Shuttle program have provided extensive data illustrating bone degenerative responses to mechanical unloading in microgravity. Specifically CDKN1a/p21, an inhibitory modulator of cell cycle progression, is upregulated in osteoprecursor cells of the femur during 15-day spaceflight, suggesting that microgravity can block stem cell-based tissue regenerative process at the level of progenitor proliferation and differentiation. To study a potential role for CDKN1a/p21 in regulating osteogenic mechanosensitivity, we cultured primary bone marrow osteoprogenitor cells from CDKN1a/p21-null (p21-null) and wildtype mice with and without mechanical stimulation, and compared their morphological, proliferative, and in-vitro mineralization responses. Structural cell alterations due to mechanical stimulation were assessed by florescence labeling of f-actin cytoskeleton and focal adhesions. Mechanical stimulation of p21-null cells resulted in more pronounced cytoskeletal alignment with the axis of stretch than for wildtype cells. In addition, p21-null cells subjected to stretch loading also formed significantly more focal adhesions than wildtype cells. Combined these findings suggest that p21-null cells are structurally more responsive to stretch stimulation than the wildtype cells. Because osteoprogenitor cells are well known to respond to mechanical stimulation with increased proliferation, we also tested this response in p21-null cells. Results from those experiments show the proliferative capacity of mechanically stimulated p21-null cells far exceeded that of wildtype controls. Specifically, cell counts from 14, and 21 days post mechanical stimulation, show that p21- null cells to have a 4-fold increase in proliferation compared to wildtype. When the p21-null cell differentiation response to mechanical stimulation was evaluated, the p21-null cultuers elicited more extensive mineralization at earlier assessed timepoints than control cultures. Specifically, Von Kossa staining for mineralized matrix showed that the p21-null cells produced more than twice the mineralized surface area of wildtype cells, and at an earlier 7-day time point in culture. Taken together these results suggest that CDKN1a/p21 normally plays a role in negatively regulating osteoprogenitor proliferation and differentiation responses to mechanostimulation in bone. Findings of CDKN1a/p21's increased expression during spaceflight in microgravity also suggest not only a potential molecular mechanism for arresting regenerative bone growth in space, but potentially also a reduced impact for bone-formation-promoting exercise mechanostimulation. The findings described here constitute a novel role for p21 as a regulator of tissue regeneration in response to mechanical load stimulation, and also suggest a new promising molecular target to promote regenerative health in disuse conditions.

gravity↗

Simulation of a Full-Scale Crash Test of a Fokker F28 Fellowship Aircraft

In June 2019, a full-scale crash test of a Fokker F28 Fellowship aircraft was conducted as part of a joint National Aeronautics and Space Administration/Federal Aviation Administration (NASA/FAA) project to investigate the performance of transport aircraft under realistic crash conditions. The test objectives were to provide data for assessment of transport aircraft crash worthiness and to generate test data for model validation. The test article was loaded with transport aircraft seats in a 3+2 configuration. A total of 24 instrumented Anthropomorphic Test Devices (ATDs) were placed in the seats and restrained. The test article weighed 33,306-lb. and, during the crash test, impacted a 2-ft. high soil bed at 65.3-ft/s forward and 31.8-ft/s vertical velocity. The full-scale crash test was simulated using the commercial nonlinear explicit transient dynamic finite element code, LSDYNA®. This paper will provide a description of the test article and the crash test conditions, document the F28 full-scale model development, and present test-analysis comparisons in several categories including inertial properties, kinematic responses, structural acceleration responses, and airframe deformation and failure. In addition, test-analysis results will be quantified based on the International Organization for Standardization (ISO) 16250 curve comparison methodology.

Jackson, Karen E.↗

Nonlinear analysis of the forced response of structural elements

A general procedure is presented for the nonlinear analysis of the forced response of structural elements to harmonic excitations. Internal resonances (i.e., modal interactions) are taken into account. All excitations are considered, with special consideration given to resonant excitations. The general procedure is applied to clamped-hinged beams. The results reveal that exciting a higher mode may lead to a larger response in a lower interacting mode, contrary to the results of linear analyses.

Nayfeh, A. H.↗