Results for “structural strain” — Page 9

DOE OSTI2024

Experimental testing of additively manufactured embedded fiber optic smart devices for clean energy applications

Abstract An additively manufactured prototype smart device was created to investigate in-flow temperature distributions using embedded high-definition fiber optic sensors within a component for clean energy systems. The devices were created using Ultrasonic Additive Manufacturing to create a unique embedded pathway within a flow conditioner for the high-definition fiber optic sensors to be placed within. The fibers used allowed for temperature measurements to be taken every 0.65 mm along the fiber. The high-resolution fibers were thermally calibrated enable the 2D reconstruction of the temperature profile in the flow path of the structure. This is due to the temperature-related strain response of the material and strain measurements of the fibers. Hot airflow testing of these devices showed the ability to identify localized temperature differences in the flow. The observed strain response within the smart device had higher strain concentrations in the thicker web regions than in the thinner web regions. These higher strain regions resulted in higher uncertainties for the temperature responses. Further calibration is needed to improve the accuracy of the smart devices, specifically within the inner web structures of a flow straightening component. Further investigations of the devices within flow showed the temperature sensing to be independent of the effects of flow velocity. The devices were able to distinguish temperature differences within single and two-phase flow and showed local sensitivity to the temperature changes with the identification of hot and cold spots. The presented results showed the viability of the smart device for obtaining detailed temperature distributions using common industrial components. Eventually, the goal for these smart devices will be to withstand higher temperature and pressure environments such as those experienced in nuclear, fusion, and concentrated solar energy systems.

Donlan, Connor F. (ORCID:0000000223317882)↗

DOE OSTI2024

Structural phase diagram for Sm-substituted BiFeO 3 multiferroics

The structural evolution of Sm substituted BiFe⁢O 3 is studied by total x-ray scattering and structure modeling. It is shown that the crystal structure changes from polar to antipolar and then to nonpolar when the Sm to Bi ratio in the material approaches 20% and 40%, respectively, with no intermixing between the structure types. The evolution is driven by lattice strain induced by the difference in the size of Sm and Bi atoms, leading to changes in the pattern of octahedral tilts and Bi off-centering, which, in turn, induce changes in the multiferroic properties. Furthermore, the substitution ratio at which the different structure types emerge appears to be tied up with the average radius of the atomic species occupying the Bi sites in the perovskite lattice and volume occupied by a formula unit, rendering both quantities useful predictor variables for guiding computational searches for substituted BiFe⁢O 3 multiferroics with improved functional properties.

Ferroelectricity↗

DOE OSTI2025

X-ray diffraction strains in laser-ablated aluminum, nickel, sodium, and invar: Pressures to 475 GPa

Dynamically compressed materials in longitudinal waves are described by two physical models: hydrostatic pressure, with equal, normal, principal stresses or material uniaxially strained in the wave propagation direction. These models are disparate, so experimental comparisons and evaluations are important. Polycrystalline material in a state of hydrostatic pressure will have no eccentricity of x-ray-diffracted Debye–Scherrer rings. A general three-dimensional solution of Bragg diffracted x rays based on principal crystallographic strains in the compression wave was found. The distortion of x-ray diffraction beams has been used for strain measurements; the analysis developed incorporates a strained reciprocal lattice and the incident x-ray beam. Strain-distorted Polanyi surfaces form an annulus of compression with an ellipsoid of revolution in reciprocal space, which is intersected by Ewald's sphere for Bragg diffraction. The in situ measurements for strain describe nanosecond diffraction evaluated using two planes, (hkl) and (h′k′l′), both in the same crystallographic phase. Diffraction from Al, Ni, Na, and Invar quantifies the compression axial strains in these materials: The compression axial ratios are 0.65, 1.05, 0.88, and 1.58 at pressures of 291, 402, 409, and 367 GPa for the respective materials. Crystal structure transformations with homogeneous pressurized stresses, mandating equal normal strains, should not be anticipated to agree with heterogeneous, uniaxially strained, and sheared crystalline phases. Measurements support in-plane strains increasing with pressure, p , in fcc and hcp aluminum as ε 22 = −0.21 p /TPa.

Alloys↗

DOE OSTI2025

Tunneling Barrier-Integrated Gold Nanofilms for Negative Strain Gauging with Near-Zero Energy Consumption

Wireless strain sensors with minimal power needs are essential for long-term monitoring in energy-limited environments. We present a soft tunneling barrier-integrated gold thin film for negative strain sensing with near-zero energy consumption. The device features a strain-induced transition from an insulating to a metallic state, increasing conductivity by 9 orders of magnitude under a controlled strain. It consists of Au-PDMS-Au nanofilm layers, where the Au structures are near the percolation threshold and the PDMS layer acts as a tunneling barrier. Under strain, thinning due to the Poisson effect lowers the barrier’s potential height, enabling electron tunneling and forming an electrical path. Further, with a standby power consumption of ~10 –5 mW over 10 6 times lower than conventional sensors (~12.5 mW), this device is ideal for real-time, long-term stationary structural monitoring in multiple locations.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2024

Suppressing strain propagation in ultrahigh-Ni cathodes during fast charging via epitaxial entropy-assisted coating

Surface reconstruction and the associated severe strain propagation have long been reported as the major cause of cathode failure during fast charging and long-term cycling. Despite tremendous attempts, no known strategies can simultaneously address the electro-chemomechanical instability without sacrificing energy and power density. Here we report an epitaxial entropy-assisted coating strategy for ultrahigh-Ni LiNi x Co y Mn 1-x-y O 2 (x ≥ 0.9) cathodes via an oriented attachment-driven reaction between Wadsley-Roth phase-based oxides and the layered-oxide cathodes. Further, the high anti-cracking and anti-corrosion tolerances as well as the fast ionic transport of the entropy-assisted surface effectively improved the fast charging/discharging capability, wide temperature tolerance and thermal stability of the ultrahigh-Ni cathodes. Comprehensive analysis from the primary and secondary particle level to the electrode level using multi-scale in situ synchrotron X-ray probes reveals greatly reduced lattice dislocations, anisotropic lattice strain and oxygen release as well as improved bulk/local structural stability, even when charging beyond the threshold state of charge (75%) of layered cathodes. Layered Ni-rich oxide cathodes are susceptible to challenges with surface reconstruction and strain propagation, limiting their cyclability. The authors propose a solution involving oriented attachment-driven reactions, utilizing Wadsley-Roth nanocrystals and layered oxide to induce an epitaxial entropy-assisted coating, effectively addressing these issues.

25 ENERGY STORAGE↗

DOE OSTI2025

Inverse design of cellular structures with the targeted nonlinear mechanical response

Advanced additive manufacturing capabilities have enabled a transformational ability to create sophisticated cellular structures using diverse materials. By altering the topology of the unit cell, the mechanical behavior, such as the stress-strain response during compression, can be modulated. Nevertheless, identifying a printable topology within an enormous design space that would precisely deliver the targeted nonlinear material response is challenging. We propose a data-driven generative framework based on a conditional variational autoencoder (cVAE) architecture that can inverse design the cellular structure based on the intended nonlinear stress-strain response. Trained on a dataset of structure-property pairs, the cVAE learns a compact and expressive latent space that enables efficient mapping from targets to feasible geometries. Two inference modes are explored: (1) decoder-only generation, which enables the exploration of diverse designs conditioned solely on the desired mechanical response, and (2) encoder-decoder generation, which further allows for the incorporation of desired topologies, ensuring the generated structure conforms to both mechanical properties and to desired-topology constraints. The results demonstrate that the model can generate structurally plausible and mechanically accurate designs, with the predicted stress-strain curves closely matching the targets. Even under joint conditioning, the model effectively balances geometric fidelity and functional performance.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Strain Engineering: Reduction of Microstrain at the Perovskite Surface via Alkali Metal Chloride Treatment Enhances Stability

Degradation of halide perovskites under a humid atmosphere is the major challenge preventing widespread commercial deployment of this material class. Here it is shown that strain engineering via alkali metal chloride treatment at the FAPbI 3 /SnO 2 interface effectively improves moisture-related stability. CsCl and KCl treatments reduce microstrain at the perovskite surface and slow the α- to δ-phase transformation. Alkali metal treatments with LiCl, NaCl, and RbCl led to an increase in microstrain and faster degradation. The compressive strain at the perovskite surface was the smallest for CsCl and was linked to improved stability. First-principles density functional theory calculations confirm the preferential formation of alkali defects at interstitial positions at the perovskite surface. Particularly CsCl and KCl treatments lead to a release of compressive strain at the perovskite surface and local structural distortions that may favor passivation of surface defects. In contrast, the room-temperature dynamics of Li interstitials result in an overall expansion of lattice volume, which may be linked to more facile lattice degradation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Artificial-Intelligence Aided Design and Synthesis of Novel Layered 2D Multi-Principal Element Materials for Energy Storage (Final Report)

This DOE-EPSCoR project aimed to predict, synthesize, and characterize novel layered two-dimensional (2D) high-entropy materials (HEMs). These 2D-HEMs, composed of multiple principal elements in nearly equal concentrations, are distinct from traditional 2D materials (typically containing two or three elements) and conventional alloys (dominated by a single primary element with minor secondary additions). Their unique structural and compositional features enable significant lattice strain accommodation, resulting in enhanced electrode performance and potential applications in catalysis, hydrogen storage, sensing, quantum information technologies, and flexible electronics. The research focused on addressing four fundamental questions: (i) What combinations of elements can form stable and synthesizable 2D-HEMs? (ii) What mechanisms drive the stability and synthesizability of crystalline single-phase 2D-HEMs? (iii) How do local chemical disorder and defects influence the macroscopic electronic and mechanical properties? and (iv) What charge storage mechanisms are active in selectively synthesized 2D-HEMs for battery and supercapacitor electrode applications? To achieve these goals, the project employed an integrated theory-experiment approach, incorporating high-throughput first-principles calculations, theoretical modeling, data mining, experimental synthesis, and advanced characterization techniques. The advanced computing resources and state-of-the-art experimental characterization facilities at Oak Ridge National Laboratory (ORNL) were leveraged through collaboration. Beyond scientific advancements, the project contributed to workforce development. Two postdoctoral researchers and three graduate students at the University of Maine were trained through co-advising by ORNL scientists and collaborative interactions, strengthening their expertise in cutting-edge materials science.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Enhancing the Design of Photocathodes with 90% polarization and QE > 1% for DOE NP (Final Report)

This project’s 3 major goals were the following: 1. Fabricate state-of-the-art spin-polarized photocathodes using MOCVD and develop knowledge of fabrication parameters. 2. Enhance the design of 2 structures of spin-polarized photocathodes (strained-superlattice and strained-superlattice with distributed Bragg reflector) to assess paths to the next generation of spin-polarized photocathodes. 3. Provide a supply of state-of-the-art spin-polarized photocathodes to both Brookhaven National Laboratory and the Thomas Jefferson National Accelerator Facility.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2024

Interim Development of new Class B Code Case with Variable Design Lifetime and enhanced design rules to guard against cyclic structural failure mode

This report summarizes updates on the ongoing development of the new American Society of Mechanical Engineers Section III, Division 5, Class B rules to address the potential failure modes of Class B components. An initial design-by-analysis approach and supporting design rules are presented. The elastic-perfectly plastic (EPP) analysis approach has been adopted for primary stress limit and ratcheting check to prevent the component failure against the structural failure mode against primary load and strain accumulation due to cyclic loads. The creep-fatigue damage assessment uses explicitly defined elastic follow-up calculated from the stress concentration region of given component. Damage fraction calculation uses a novel coupled approach to capture the influence of the elastic follow-up and provide adequate conservatism for Class B components. The proposed Class B rules does not use the stress classification approach and uses the combined loads to assess component.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Pre-Transient Characterization of Historic EBR-II Pins for Transient Testing

Current interest in sodium-cooled fast reactor (SFR) designs, such as TerraPower’s Natrium Reactor, has highlighted the need for advanced reactor fuel technology development. Modern U-Zr and U- Pu-Zr pin designs are primary candidates to fuel SFRs and boast high fuel utilization capacity, increased fuel-cladding compatibility, and improved safety through inherent feedback mechanisms. Despite over 60 years of metallic fuel irradiation, uncertainties exist in the performance of the fuel system, particularly under transient overpower (TOP) and loss of flow (LOF) scenarios. Throughout historical testing within the Experimental Breeder Reactor II (EBR-II) and the Fast Flux Test Facility (FFTF), fuel behavior has demonstrated benign response to transient reactor conditions; however, accurate predictions of failure thresholds to inform operational limitations rely heavily on fuel composition, burnup, and irradiation history. In expanding TOP and LOF testing, the Transient Heat sink Overpower Response (THOR) Capsule will be used to test modern fuel technologies in a static sodium environment in the Transient Reactor Test (TREAT) Facility. The THOR capsule is highly instrumented and will provide time-dependent thermal behavior of SFR fuel pins subjected to accident conditions within TREAT. The THOR-Metallic (THOR- M) campaign aims to validate and expand historical TOP and LOF testing on high burnup U-Zr and U-Pu- Zr fuel alloys previously irradiated in EBR-II by running the rods to failure. This contribution focuses primarily on the pre-transient engineering-scale destructive and non- destructive characterization that has been conducted on both the test and sibling pins used for the TOP and LOF tests. All pins underwent visual examination, neutron radiography, element contact profilometry, and precise gamma scan. The sibling pins used for each test were further analyzed using gas assay, sampling, and recharge analysis (GASR), and optical microscopy. The results from each technique confirmed that the fuel pins were intact and devoid of any atypical developments when compared to historical data. Additionally, the analyzed measurements establish a baseline for comparison to post-transient analysis. Key fuel behaviors quanitifed include axial elongation of the fuel column, diametral strain of the pin, patterns in fluff structure geometry, changes in axial isotope distribution, evolution of constituent redistribution, porosity, and fission gas release. The pre-transient measurements and changes attributed to transient behavior from post-transient measurement will be compared to historical data to capture the behavioral dependence on composition, burnup, and irradiation history. Results from this work advance the initiatives of the THOR-M campaign, which aid in informing fuel performance models and establishing safety criteria for SFR operational limits. The novel combination of test environment, in-situ instrumentation, and comprehensive suite of characterization methods provides greater understanding of transient fuel behavior. Overall, information on the time and condition of pin failure for high burnup U-Pu-Zr will greatly expand the limited existing TOP and LOF test data.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2024

Pre-Transient Characterization of Historic EBR-II Pins for Transient Testing

Current interest in sodium-cooled fast reactor (SFR) designs, such as TerraPower’s Natrium Reactor, has highlighted the need for advanced reactor fuel technology development. Modern U-Zr and U- Pu-Zr pin designs are primary candidates to fuel SFRs and boast high fuel utilization capacity, increased fuel-cladding compatibility, and improved safety through inherent feedback mechanisms. Despite over 60 years of metallic fuel irradiation, uncertainties exist in the performance of the fuel system, particularly under transient overpower (TOP) and loss of flow (LOF) scenarios. Throughout historical testing within the Experimental Breeder Reactor II (EBR-II) and the Fast Flux Test Facility (FFTF), fuel behavior has demonstrated benign response to transient reactor conditions; however, accurate predictions of failure thresholds to inform operational limitations rely heavily on fuel composition, burnup, and irradiation history. In expanding TOP and LOF testing, the Transient Heat sink Overpower Response (THOR) Capsule will be used to test modern fuel technologies in a static sodium environment in the Transient Reactor Test (TREAT) Facility. The THOR capsule is highly instrumented and will provide time-dependent thermal behavior of SFR fuel pins subjected to accident conditions within TREAT. The THOR-Metallic (THOR- M) campaign aims to validate and expand historical TOP and LOF testing on high burnup U-Zr and U-Pu- Zr fuel alloys previously irradiated in EBR-II by running the rods to failure. This contribution focuses primarily on the pre-transient engineering-scale destructive and non- destructive characterization that has been conducted on both the test and sibling pins used for the TOP and LOF tests. All pins underwent visual examination, neutron radiography, element contact profilometry, and precise gamma scan. The sibling pins used for each test were further analyzed using gas assay, sampling, and recharge analysis (GASR), and optical microscopy. The results from each technique confirmed that the fuel pins were intact and devoid of any atypical developments when compared to historical data. Additionally, the analyzed measurements establish a baseline for comparison to post-transient analysis. Key fuel behaviors quanitifed include axial elongation of the fuel column, diametral strain of the pin, patterns in fluff structure geometry, changes in axial isotope distribution, evolution of constituent redistribution, porosity, and fission gas release. The pre-transient measurements and changes attributed to transient behavior from post-transient measurement will be compared to historical data to capture the behavioral dependence on composition, burnup, and irradiation history. Results from this work advance the initiatives of the THOR-M campaign, which aid in informing fuel performance models and establishing safety criteria for SFR operational limits. The novel combination of test environment, in-situ instrumentation, and comprehensive suite of characterization methods provides greater understanding of transient fuel behavior. Overall, information on the time and condition of pin failure for high burnup U-Pu-Zr will greatly expand the limited existing TOP and LOF test data.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2025

Synthesis of superconducting freestanding infinite-layer nickelate heterostructures on the millimetre scale

The development of superconductivity in infinite-layer nickelates through hole-doping relies on the controlled synthesis of Ni in a high oxidation state, followed by topotactic reduction to a very low oxidation state. So far, superconductivity has been realized only in epitaxial thin films. Here, in this work, we integrate these techniques with heterostructures that include an epitaxial soluble buffer layer, enabling the release of freestanding (Nd,Sr)NiO 2 heterostructures. The released heterostructures exhibit comparable structural and electronic properties to those of optimized thin films, with lateral dimensions ranging from millimetres to ~100 μm, depending on the degree of strain released with respect to the initial substrate. The changes in the superconducting transition temperature upon release of the heterostructure mirror those reported for variations in substrate and pressure, suggesting a common underlying response to strain in the infinite-layer nickelate superconductivity. These freestanding structures will facilitate a range of experimental studies without the constraints of substrates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

Polarization rotation in a ferroelectric BaTiO 3 film through low-energy He-implantation

Domain engineering in ferroelectric thin films is crucial for next-generation microelectronic and photonic technologies. Here, a method is demonstrated to precisely control domain configurations in BaTiO 3 thin films through low-energy He ion implantation. The approach transforms a mixed ferroelectric domain state with significant in-plane polarization into a uniform out-of-plane tetragonal phase by selectively modifying the strain state in the film’s top region. This structural transition significantly improves domain homogeneity and reduces polarization imprint, leading to symmetric ferroelectric switching characteristics. The demonstrated ability to manipulate ferroelectric domains post-growth enables tailored functional properties without compromising the coherently strained bottom interface. The method’s compatibility with semiconductor processing and ability to selectively modify specific regions make it particularly promising for practical implementation in integrated devices. This work establishes a versatile approach for strain-mediated domain engineering that could be extended to a wide range of ferroelectric systems, providing new opportunities for memory, sensing, and photonic applications where precise control of polarization states is essential.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Polarization rotation in a ferroelectric BaTiO$_3$ film through low-energy He-implantation

Domain engineering in ferroelectric thin films is crucial for next-generation microelectronic and photonic technologies. Here, a method is demonstrated to precisely control domain configurations in BaTiO$_3$ thin films through low-energy He ion implantation. The approach transforms a mixed ferroelectric domain state with significant in-plane polarization into a uniform out-of-plane tetragonal phase by selectively modifying the strain state in the film's top region. This structural transition significantly improves domain homogeneity and reduces polarization imprint, leading to symmetric ferroelectric switching characteristics. The demonstrated ability to manipulate ferroelectric domains post-growth enables tailored functional properties without compromising the coherently strained bottom interface. The method's compatibility with semiconductor processing and ability to selectively modify specific regions make it particularly promising for practical implementation in integrated devices. This work establishes a versatile approach for strain-mediated domain engineering that could be extended to a wide range of ferroelectric systems, providing new opportunities for memory, sensing, and photonic applications where precise control of polarization states is essential.

Luo, Liang [Ames Laboratory (AMES), Ames, IA (Unit↗

DOE OSTI2024

Tuning Perovskites’ Hydration-Induced Chemical Expansion with Octahedral Tilt Angles

Hydration-induced strains in proton-conducting oxides compromise chemo-mechanical stability when these materials are applied in protonic ceramic electrochemical cells. Here, to develop design principles for zero-strain materials, we systematically studied the hydration coefficients of chemical expansion (CCEs) in perovskite (Sr, Ba)(Ce, Zr, Y)O 3–x solid solutions with in situ dilatometry and thermogravimetric analysis in the range of 430–630 °C. By including and decoupling a wide range of tolerance factors and lattice parameters, we were able to identify a minimum in hydration CCEs (0–0.02) at intermediate tolerance factor values (t ≈ 0.95). Conversely, despite expectations of lower CCEs in larger unit cells, no general trend in CCE versus lattice parameter was found, and opposite trends could be seen for Sr(Ce, Zr, Y)O 3–x versus Ba(Ce, Zr, Y)O 3–x separately. In situ neutron diffraction (ND) enabled atomistic insight. Upon decreasing t, chemical strain anisotropy increased, but this trend did not match the U-shaped dependence of macroscopic CCEs on t. Instead, perovskites with intermediate t, hosting intermediate octahedral tilt angles in the nominally dry state, underwent the largest change in the B–O–B angles during hydration. Accommodating hydration through decreasing B–O–B angles is beneficial because it does not result in large lattice parameter changes. We propose an intermediate tolerance factor as a simple structural descriptor to enable near-zero hydration strains in proton-conducting perovskites.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Application of printed strain gauges in prototypical nuclear reactor conditions

This report discusses the current development and testing of additively manufactured temperature sensors and resistive/ capacitive strain gauges. This has potential to improve the sensor design and manufacturing techniques to meet the requirements of in-pile monitoring of mechanical properties and structural health of materials and specimens in current and advanced nuclear test reactors (i.e., in terms of environment conditions, sample geometry, and materials compatibility). The developmental additively manufactured strain gauges are exposed to separate effects testing (i.e., mechanical strain (up to 1000 µe), high temperature (up to 700 °C)) to determine environmental factors that affect the performance of the strain gauge. The robustness and integrity of a printed strain gauge layer exposed to a molten salt environment for up to 500 hours was evaluated, with the goal of assessing material compatibility of printed strain sensors for instrumented surveillance test articles in molten salt reactors. In addition, sensor qualification methodologies are further developed for determining the reliability and robustness at the interface of the additively manufactured strain gauge materials.

36 - MATERIALS SCIENCE↗

DOE OSTI2025

Synthesis, structure, and stability of a novel 2 H -azirine under pressure

We have synthesized 2,3-diphenyl-2H-azirine, a strained unsaturated heterocyclic compound, and examined its high-pressure behavior to above 10 GPa using diamond anvil cell techniques. Single crystal X-ray diffraction at ambient conditions reveals that the crystal structure is hexagonal and consists of interesting helices surrounding voids in the structure. A continuous shift of the Raman and infrared vibrational spectra with increasing pressure is observed, indicating that the molecular structure is preserved to at least 8 GPa at room temperature. High-pressure synchrotron powder X-ray diffraction shows that the hexagonal structure persists, with a smooth compression of the a and c parameters to 10 GPa. The structural stability under pressure is attributed to the reduction in void size within the helical framework despite the inherent strain and reactivity of the molecule. The channels in the structure could encapsulate small molecules for gas or energy storage applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗