Search NASA⌕ Search

SEARCH · Search NASA

Results for “structure changes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Molecular Structural Changes in Alfalfa Detected by ATR-FTIR Spectroscopy in Response to Silencing of TT8 and HB12 Genes

This study investigated the spectral changes in alfalfa molecular structures induced by silencing of Transparent Testa 8 ( TT8 ) and Homeobox 12 ( HB12 ) genes with univariate and multivariate analyses. TT8 -silenced (TT8i), HB12-silenced (HB12i) and wild type (WT) alfalfa were grown in a greenhouse under normal conditions and were harvested at early-to-mid vegetative stage. Samples were free-dried and grounded through 0.02 mm sieve for spectra collections with attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy. Afterwards, both univariate and multivariate analyses were conducted on amide, carbohydrate and lipid regions. Univariate results showed that silencing of TT8 and HB12 genes affected peak heights of most total carbohydrate (TC) and structural carbohydrate (STC), and structural carbohydrate area (STCA) in carbohydrate regions; and β-sheet height, amide areas, and ratios of amide I/II and α-helix/β-sheet in amide region; and symmetric CH2 (SyCH2), asymmetric CH2 (AsCH2) and (a)symmetric CH2 and CH3 area (ASCCA) in the lipid region. Multivariate analysis showed that both hierarchy cluster analysis (HCA) and principal component analysis (PCA) clearly separated WT from transgenic plants in all carbohydrate regions and (a)symmetric CH2 and CH3 (ASCC) lipid region. In the amide region, PCA separated WT, TT8i and HB12i into different groups, while HCA clustered WT into a separate group. In conclusion, silencing of TT8 and HB12 affected intrinsic molecular structures of both amide and carbohydrate profiles in alfalfa, and multivariate analyses successfully distinguished gene-silenced alfalfa from its parental WT control.

Biochemistry & Molecular Biology↗

Probing the Influence of Thermally Induced Structural Changes on the Microstructural Evolution in Shale using Multiscale X-ray Scattering Measurements

Various pathways to accelerate the recovery of hydrocarbons from unconventional subsurface environments have been proposed, including the use of high-temperature fluids. However, the influence of temperature on the structural and microstructural changes in complex subsurface materials characterized by compositional and morphological heterogeneity are not very well understood. In this study, in operando ultrasmall angle, small angle, and wide-angle X-ray scattering (USAXS/ SAXS/WAXS) measurements were performed to link the structural and morphological changes in shale when heated from 30 to 1150 °C. The structural changes observed from the wide-angle X-ray scattering measurements were complemented by the changes in the porosity, particle size, and surface morphology. Overall, we report the combined USAXS/SAXS measurements showed enhanced smoothness in the pore–solid interface on heating. The dehydroxylation of illite and calcination of calcium carbonate were noted prior to the formation of denser and sintered silicate and alumino-silicate phases such as Mg 2 SiO 4 (forsterite), Fe 0.3 Mg 0.7 (SiO 3 ) (enstatite), and Al 2.35 Si 0.64 O 4.82 (mullite).

54 ENVIRONMENTAL SCIENCES↗

Chemical and Structural Changes in Corn Stover After Ensiling: Influence on Bioconversion

Production of biofuels, bioproducts, and bioenergy requires a well-characterized, stable, and reasonably uniform biomass supply and well-established supply chains for shipping biomass from farm fields to biorefineries, while achieving year-round production targets. Preserving and stabilizing biomass feedstock during storage is a necessity for cost-effective and sustainable biofuel production. Ensiling is a common storage method used to preserve and even improve forage quality; however, the impact of ensiling on biomass physical and chemical properties that influence bioconversion processes has been variable. Our objective in this work was to determine the effects of ensiling on lignocellulosic feedstock physicochemical properties and how that influences bioconversion requirements. We observed statistically significant decreases (p < 0.05) in the content of two major structural carbohydrates (glucan and xylan) of 5 and 8%, respectively, between the ensiled and non-ensiled materials. We were unable to detect differences in sugar yields from structural carbohydrates after pretreatment and enzymatic hydrolysis of the ensiled materials compared to non-ensiled controls. Based on this work, we conclude that ensiling the corn stover did not change the bioconversion requirements compared to the control samples and incurred losses of structural carbohydrates. At the light microscopy level, ensiled corn stover exhibited little structural change or relocation of cell wall components as detected by immunocytochemistry. However, more subtle structural changes were revealed by electron microscopy, as ensiled cell walls exhibit ultrastructural characteristics such as wall delimitation intermediate between non-ensiled and dilute-acid-pretreated cell walls. These findings suggest that alternative methods of conversion, such as deacetylation and mechanical refining, could take advantage of lamellar defects and may be more effective than dilute acid or hot water pretreatment for biomass conversion of ensiled materials.

09 BIOMASS FUELS↗

pH- and ionic-strength-induced structural changes in poly(acrylic acid)-lipid-based self-assembled materials.

The effect of a polyanion introduced as a lipid conjugate (poly(acrylic acid)- dimyristoyl-sn-glycero-3-phosphoethanolamine, PAA-DMPE) on the structure of a self-assembled, biomembrane mimetic has been evaluated using synchrotron small-angle X-ray scattering (SAXS). At high grafting density (8-11 mol.%), the PAA chains were found to produce significant changes in structure in response to changes in pH and electrolyte composition. At low pH and in the absence of salt (NaCl), the neutral PAA chains adopt a coil conformational state that leads to the formation of a swollen lamellar structure. Upon the addition of salt at low to intermediate pH values, two lamellar phases, a collapsed and an expanded structure, coexist. Finally, when the polymer is fully ionized (at high pH), the extended conformation of the polymer generates a cubic phase. The results of this study contribute to an understanding of how polyelectrolytes may ultimately be harnessed for the preparation of self-assembling materials responsive to external stimuli.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Li-atoms-induced structure changes of Guinier–Preston–Bagaryatsky zones in AlCuLiMg alloys

Guinier–Preston–Bagaryatsky (GPB) zones are the well-known strengthening precipitates of AlCuMg alloys formed upon thermal ageing. Here we report that when formed in AlCuLiMg alloys the GPB zones can change significantly in morphology and structure. It is shown that though they do still consist of Al, Cu and Mg elements fundamentally, the GPB zones in AlCuLiMg alloys have a rather different structure due to a featured Li-segregation at their interfaces with the matrix and possible Li-replacement of partial Mg atoms in the structure. As such the Li-containing GPB zones often develop from one-dimensional to quasi-two-dimensional precipitates. - Highlights: • We observe Guinier–Preston–Bagaryatsky zone variants in AlCuLiMg alloys. • We obtain atomic-resolution images of the precipitates and model their structures. • Li-atoms play a key role in modifying the structure of these precipitate variants.

36 MATERIALS SCIENCE↗

Solar assisted alkali pretreatment of garden biomass: Effects on lignocellulose degradation, enzymatic hydrolysis, crystallinity and ultra-structural changes in lignocellulose

Highlights: • SAAP is an efficient and economic means of pretreatment. • SAAP was found to be efficient in lignin and hemicellulose removal. • SAAP enhanced the enzymatic hydrolysis. • FTIR, XRD and SEM provided vivid understanding about the mode of action of SAAP. • Mass balance closer of 98% for pretreated GB confirmed the reliability of SAAP. - Abstract: A comprehensive study was carried out to assess the effectiveness of solar assisted alkali pretreatment (SAAP) on garden biomass (GB). The pretreatment efficiency was assessed based on lignocellulose degradation, conversion of cellulose into reducing sugars, changes in the ultra-structure and functional groups of lignocellulose and impact on the crystallinity of cellulose, etc. SAAP was found to be efficient for the removal of lignin and hemicellulose that facilitated enzymatic hydrolysis of cellulose. FTIR and XRD studies provided details on the effectiveness of SAAP on lignocellulosic moiety and crystallinity of cellulose. Scanning electron microscopic analysis showed ultra-structural disturbances in the microfibrils of GB as a result of pretreatment. The mass balance closer of 97.87% after pretreatment confirmed the reliability of SAAP pretreatment. Based on the results, it is concluded that SAAP is not only an efficient means of pretreatment but also economical as it involved no energy expenditure for heat generation during pretreatment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

STRUCTURAL CHANGES OF THE SUBLIMATION WALL IN PROTOPLANETARY DISKS DUE TO VARYING ACCRETION ILLUMINATION: A MECHANISM FOR RAPID INFRARED VARIABILITY

We study the changes in the sublimation wall structure due to variable illumination of a stellar hot spot on the dusty surroundings of a young star. The model includes the settling of large grains toward the disk midplane and the effect of the vertical density profile on the shaping of the sublimation wall. From a survey of objects in the young cluster IC 348, we extract three objects (LRLL 32, 40, and 63) that present typical variability in the [3.6] and [4.5] IRAC bands. We use the Spitzer photometry and ground-based 2–5 μm spectra for comparison with the models. Even though there is a correlation between accretion luminosity and dust emission based on the observations, we conclude from the modeling that the systems with lower mass accretion rates (LRLL 32 and 63) cannot be explained simply by a variable hot spot illuminating a sublimation wall. The observed variability amplitude for LRLL 40 (the system with the largest value of the mass accretion rate) can be obtained using the mechanism presented here. When considering a wide range of hot spot sizes and temperatures, the models can reproduce the infrared fluctuations seen in recent surveys, but only with accretion rate fluctuations that are orders of magnitude larger than is typically observed. These results highlight the relevance of accretion as a variability mechanism as well as its limitations in producing the full extent of the observed infrared variability.

79 ASTRONOMY AND ASTROPHYSICS↗

Silica structural changes induced by thermal treatment or ionic implantation as probed by IR reflectance spectroscopy

Fourier transformed infrared microreflectance spectroscopy is used to probe and compare the consequences of thermal quenching or ionic implantation on the structure of silica. A linear change in the main structural feature associated with Si-O-Si vibration with fictive temperature (T{sub f}) is observed up to T{sub f}=1400 deg. C. Ionic implantation is shown to shift the frequency of the main IR Si-O-Si vibration toward much lower wavenumbers, for all deposited energies, indicating that a comparison can be drawn between fictive temperature and irradiation effects. Extrapolating the linear changes in the IR structural bands obtained as a function of T{sub f} for the implanted samples, we show that two structural (nu{sub TO}) and (nu{sub B}) contributions are not affected by ionic implantation, as they would be by a unique very high T{sub f}. In the case of ionic implantation, we also evidence the development of some specific structural contributions indicating a depolymerization of silica network.

36 MATERIALS SCIENCE↗

Structural Change in Lead Fluorapatite at High Pressure

The structure of lead fluorapatite [PbFAP; Pb{sub 10}(PO{sub 4}){sub 6}F{sub 2}], crystallized from the melt in a platinum capsule at 1,000 C and 1 atm, has been investigated by single-crystal X-ray diffraction. Crystal data are a = 9.7638 (6), c = 7.2866 (4) {angstrom}, space group P63/m, R = 0.043, R{sub w} = 0.034. We have also studied the compressional behaviour of the c-axis channel of PbFAP up to 9 GPa at 25 C, using a diamond-anvil cell, synchrotron X-radiation, and Rietveld powder structure refinement. Pressure-volume data for the channel polyhedron of PbFAP fitted to the third-order Birch-Murnaghan equation resulted in K{sub T} = 33.2 {+-} 1.2 GPa when K{sub T}{prime} is fixed at 4. The c-axis channel of PbFAP is about twice as compressible as the unit-cell volume of PbFAP and the channel of calcium apatites. This is attributed to the anomalous narrowing of the channel of PbFAP with increase in confining pressure. Flexibility of the apatite channel is a key factor in the scavenging of toxic heavy metals by calcium apatites.

58 GEOSCIENCES↗

Structural Changes Underlying the Diffuse Dielectric Response in AgNbO3

Structural differences in the so-called M polymorphs of AgNbO{sub 3} were analyzed using combined high-resolution x-ray diffraction, neutron total scattering, electron diffraction, and x-ray absorption fine-structure measurements. These polymorphs all crystallize with Pbcm symmetry and lattice parameters {radical}2a{sub c} x {radical}2a{sub c} x 4a{sub c} (where a{sub c} {approx} 4 {angstrom} corresponds to the lattice parameter of an ideal cubic perovskite) which are determined by a complex octahedral tilt system (a{sup -}b{sup -}c{sup -})/(a{sup -}b{sup -}c{sup +}) involving a sequence of two in-phase and two antiphase rotations around the c axis. Our results revealed that, similar to KNbO{sub 3}, the Nb cations in AgNbO{sub 3} exhibit local off-center displacements correlated along Nb-Nb-Nb chains. The displacements appear to be present even in the high-temperature AgNbO{sub 3} polymorphs where the Nb cations, on average, reside on the ideal fixed-coordinate sites. The onset of the (a{sup -}b{sup -}c{sup -})/(a{sup -}b{sup -}c{sup +}) tilting in the M polymorphs lifts the symmetry restrictions on the Nb positions and promotes ordering of the local Nb displacements into a long-range antipolarlike array. This ordering preserves the average Pbcm symmetry but is manifested in electron diffuse scattering and corroborated by other local-structure sensitive techniques. Structural states previously identified as the M{sub 3} and M{sub 2} phases represent different stages of displacive ordering rather than distinct thermodynamic phases. Rietveld refinements indicated intimate coupling between the displacive behavior on the oxygen, Nb, and Ag sublattices. The Pbcm symmetry of the octahedral framework precludes a complete ordering of Nb displacements so that some positional disorder is retained. This partial disorder likely gives a source to the dielectric relaxation which, according to previous spectroscopic studies, is the origin of the diffuse dielectric response exhibited by M-type AgNbO{sub 3} at {approx}250 C.

36 MATERIALS SCIENCE↗

Mcl-1-Bim complexes accommodate surprising point mutations via minor structural changes

Mcl-1 is an antiapoptotic Bcl-2-family protein that protects cells against death. Structures of Mcl-1, and of other anti-apoptotic Bcl-2 proteins, reveal a surface groove into which the {alpha}-helical BH3 regions of certain proapoptotic proteins can bind. Despite high overall structural conservation, differences in this groove afford binding specificity that is important for the mechanism of Bcl-2 family function. We report the crystal structure of human Mcl-1 bound to a BH3 peptide derived from human Bim and the structures for three complexes that accommodate large physicochemical changes at conserved Bim sites. The mutations had surprisingly modest effects on complex stability, and the structures show that Mcl-1 can undergo small changes to accommodate the mutant ligands. For example, a shift in a leucine side chain fills a hole left by an isoleucine-to-alanine mutation at the first hydrophobic buried position of Bim BH3. Larger changes are also observed, with shifting of helix {alpha}3 accommodating an isoleucine-to-tyrosine mutation at this same position. We surveyed the variation in available Mcl-1 and Bcl-x{sub L} structures and observed moderate flexibility that is likely critical for facilitating interactions of diverse BH3-only proteins with Mcl-1. With the antiapoptotic Bcl-2 family members attracting significant attention as therapeutic targets, these structures contribute to our growing understanding of how specificity is achieved and can help to guide the design of novel inhibitors that target Mcl-1.

36 MATERIALS SCIENCE↗

Indirectly probing the structural change in ion-irradiated Zr-Based metallic glasses from small scale mechanical tests

Ion irradiation was applied to tailor the structural heterogeneities in Zr-based metallic glasses at room temperature. Experimental methods of X-ray diffraction, nanoindentation, and micropillar compression were conducted to examine the irradiation effects on their structural and mechanical property changes. It is found that the irradiated materials retained amorphous structure after room-temperature Ni ion irradiation. The reduction of elastic modulus and hardness measured by nanoindentation indicated the irradiation-induced mechanical degradation. A unified statistic model was employed to quantitatively predict the density and strength of irradiation defects, although their specific structural and physical nature is not explicitly included in this model. The transition of non-intersecting shear bands to multiple intersecting shear bands was observed on compression tests of irradiated micropillars with the increase of irradiation dose. Furthermore, the analysis of the displacement excursion of micropillar compression tests indicated a different deformation mode from the unirradiated state. These results from nanoindentation pop-in and micro-pillar compression tests suggested that irradiation eventually leads to a new state with different types and characteristics of structural heterogeneities from violent displacement cascades and non-equilibrium energy deposition/dissipation processes, which also proves ion irradiation as an effective method to tune the structure and mechanical properties of metallic glasses.

36 MATERIALS SCIENCE↗

Origin and Evolution of Magnetic Field in PMS Stars: Influence of Rotation and Structural Changes

During stellar evolution, especially in the pre-main-sequence phase, stellar structure and rotation evolve significantly, causing major changes in the dynamics and global flows of the star. We wish to assess the consequences of these changes on stellar dynamo, internal magnetic field topology, and activity level. To do so, we have performed a series of 3D HD and MHD simulations with the ASH code. We choose five different models characterized by the radius of their radiative zone following an evolutionary track computed by a 1D stellar evolution code. These models characterized stellar evolution from 1 to 50 Myr. By introducing a seed magnetic field in the fully convective model and spreading its evolved state through all four remaining cases, we observe systematic variations in the dynamical properties and magnetic field amplitude and topology of the models. The five MHD simulations develop a strong dynamo field that can reach an equipartition state between the kinetic and magnetic energies and even superequipartition levels in the faster-rotating cases. We find that the magnetic field amplitude increases as it evolves toward the zero-age main sequence. Moreover, the magnetic field topology becomes more complex, with a decreasing axisymmetric component and a nonaxisymmetric one becoming predominant. The dipolar components decrease as the rotation rate and the size of the radiative core increase. The magnetic fields possess a mixed poloidal-toroidal topology with no obvious dominant component. Moreover, the relaxation of the vestige dynamo magnetic field within the radiative core is found to satisfy MHD stability criteria. Hence, it does not experience a global reconfiguration but slowly relaxes by retaining its mixed stable poloidal-toroidal topology.

79 ASTRONOMY AND ASTROPHYSICS↗

Ion Mobility Measurements of Multianionic Metalloporphyrin Dimers: Structural Changes Induced by Countercation Exchange

We present gas-phase structures of dimers of Mn{sup III} and Fe{sup III} meso-tetra(4-sulfonatophenyl)porphyrin multianions with various amounts of sodium and hydrogen counterions. The structural assignments are achieved by combining mass spectrometry, ion mobility measurements, quantum chemical calculations, and trajectory method collision cross section calculations. For a common charge state, we observe significant topological variations in the dimer structures of [(MTPPS){sub 2}+nX]{sup (6-n)-} (M=Mn{sup III}, Fe{sup III}; X=H, Na; n = 1–3) induced by replacing hydrogen counterions by sodium. For sodium, the dimer structures are much more compact, a finding that can be rationalized by the stronger interactions of the sodium cations with the anionic sulfonic acid groups of the porphyrins as compared to hydrogen. .

74 ATOMIC AND MOLECULAR PHYSICS↗

Biophysical characterization of the structural change of Nopp140, an intrinsically disordered protein, in the interaction with CK2α

Nucleolar phosphoprotein 140 (Nopp140) is a nucleolar protein, more than 80% of which is disordered. Previous studies have shown that the C-terminal region of Nopp140 (residues 568–596) interacts with protein kinase CK2α, and inhibits the catalytic activity of CK2. Although the region of Nopp140 responsible for the interaction with CK2α was identified, the structural features and the effect of this interaction on the structure of Nopp140 have not been defined due to the difficulty of structural characterization of disordered protein. In this study, the disordered feature of Nopp140 and the effect of CK2α on the structure of Nopp140 were examined using single-molecule fluorescence resonance energy transfer (smFRET) and electron paramagnetic resonance (EPR). The interaction with CK2α was increased conformational rigidity of the CK2α-interacting region of Nopp140 (Nopp140C), suggesting that the disordered and flexible conformation of Nopp140C became more rigid conformation as it binds to CK2α. In addition, site specific spin labeling and EPR analysis confirmed that the residues 574–589 of Nopp140 are critical for binding to CK2α. Similar technical approaches can be applied to analyze the conformational changes in other IDPs during their interactions with binding partners. - Highlights: • Nopp140 is intrinsically disordered protein (IDP). • Conformation of Nopp140 became more rigid conformation due to interaction with CK2α. • smFRET and EPR could be applied to analyze the structural changes of IDPs.

60 APPLIED LIFE SCIENCES↗

Local Electronic Structure Changes in Polycrystalline CdTe with CdCl 2 Treatment and Air Exposure

Postdeposition CdCl 2 treatment of polycrystalline CdTe is known to increase the photovoltaic device efficiency. However, the precise chemical, structural, and electronic changes that underpin this improvement are still debated. In this work, spectroscopic photoemission electron microscopy was used to spatially map the vacuum level and ionization energy of CdTe films, enabling the identification of electronic structure variations between grains and grain boundaries (GBs). In vacuo preparation and inert transfer of oxide-free CdTe surfaces isolated the separate effects of CdCl 2 treatment and ambient oxygen exposure. Qualitatively, grain boundaries displayed lower work function and downward band bending relative to grain interiors, but only after air exposure of CdCl 2 -treated CdTe. Analysis of numerous space charge regions at grain boundaries showed an average depletion width of 290 nm and an average band bending magnitude of 70 meV, corresponding to a GB trap density of 10 11 cm –2 and a net carrier density of 10 15 cm –3 . Finally, these results suggest that both CdCl 2 treatment and oxygen exposure may be independently tuned to enhance the CdTe photovoltaic performance by engineering the interface and bulk electronic structure.

36 MATERIALS SCIENCE↗

Variation of directional reflectance factors with structural changes of a developing alfalfa canopy

Directional reflectance factors of an alfalfa canopy were determined and related to canopy structure, agronomic variables, and irradiance conditions at four periods during a cutting cycle. Nadir and off-nadir reflectance factors decreased with increasing biomass in Thematic Mapper band 3(0.63-0.69 micrometer) and increased with increasing biomass in band 4(0.76-0.90 micrometer). The sensor view angle had less impact on perceived reflectance as the alfalfa progressed from an erectophile canopy of stems after harvest to a near planophile canopy of leaves at maturity. Studies of directional reflectance are needed for testing and upgrading vegetation canopy models and to aid in the complex interpretation problems presented by aircraft scanners and pointable satellites where illumination and viewing geometries may vary widely. Distinct changes in the patterns of radiance observed by a sensor as structural and biomass changes occur are keys to monitoring the growth and condition of crops.

Kirchner, J. A.↗