Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface chemistry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Development of an Advanced Computational Model for OMCVD of Indium Nitride

An advanced computational model is being developed to predict the formation of indium nitride (InN) film from the reaction of trimethylindium (In(CH3)3) with ammonia (NH3). The components are introduced into the reactor in the gas phase within a background of molecular nitrogen (N2). Organometallic chemical vapor deposition occurs on a heated sapphire surface. The model simulates heat and mass transport with gas and surface chemistry under steady state and pulsed conditions. The development and validation of an accurate model for the interactions between the diffusion of gas phase species and surface kinetics is essential to enable the regulation of the process in order to produce a low defect material. The validation of the model will be performed in concert with a NASA-North Carolina State University project.

Cardelino, Carlos A.↗
NASA NTRS1993

Surface characterization of selected LDEF tray clamps

The surface characterization of chromic acid anodized 6061-T6 aluminum alloy tray clamps has shown differences in surface chemistry depending upon the position on the Long Duration Exposure Facility (LDEF). Water contact angle results showed no changes in wettability of the tray clamps. The overall surface topography of the control, trailing edge(E3) and leading edge(D9) samples was similar. The thickness of the aluminum oxide layer for all samples determined by Auger depth profiling was less than one micron. X-ray photoelectron spectroscopy (XPS) analysis of the tray clamps showed significant differences in the surface composition. Carbon and silicon containing compounds were the primary contaminants detected.

Cromer, T. F.↗
NASA NTRS1984

Nitrogen on Triton

The tentative identification of liquid nitrogen as the source of the 2.16-micron absorption band in the spectrum of Triton has suggested a surface model in which nitrogen, together with the previously identified methane, occur in some kind of chemical association. Water frost may be another surface chemistry component, and dark, photochemically-produced particles occur as a minor contaminant of the ices or liquid. Temperature is noted to be a critical factor in the surface model, because the calculated subsolar surface temperature of Triton lies near nitrogen's melting-freezing temperature. The present modeling of Triton suggests nitrogen's occurrence in the form of fine grains.

Clark, R. N.↗
NASA NTRS1984

Infrared emission associated with chemical reactions on Shuttle and SIRTF surfaces

The infrared intensities which would be observed by the Shuttle Infrared Telescope Facility (SIRTF), and which are produced by surface chemistry following atmospheric impact on SIRTF and the shuttle are estimated. Three possible sources of reactants are analyzed: (1) direct atmospheric and scattered contaminant fluxes onto the shuttle's surface; (2) direct atmospheric and scattered contaminant fluxes onto the SIRTF sunshade; and (3) scattered fluxes onto the cold SIRTF mirror. The chemical reactions are primarily initiated by the dominent flux of reactive atomic oxygen on the surfaces. Using observations of the optical glow to constrain theoretical parameters, it is estimated for source (1) that the infrared glow on the SIRTF mirror will be comparable to the zodiacal background between 1 and 10 micron wavelengths. It is speculated that oxygen reacts with the atoms and the radicals bound in the organic molecules that reside on the shuttle and the Explorer surfaces. It is concluded that for source (2) that with suitable construction, a warm sunshade will produce insignificant infrared glow. It is noted that the atomic oxygen flux on the cold SIRTF mirror (3) is insufficient to produce significant infrared glow. Infrared absorption by the ice buildup on the mirror is also small.

Hollenbach, D. J.↗
NASA NTRS1997

The Effects of Acid Passivation, Tricresyl Phosphate Pre-Soak, and UV/Ozone Treatment on the Tribology of Perfluoropolyether-Lubricated 440C Stainless Steel Couples

The boundary-lubrication performance of perfluoropolyether (PFPE) thin films in the presence of passivated 440 C stainless steel is presented. The study utilized a standard ball-on-disc tribometer. Stainless steel surfaces were passivated with one of four techniques: 1) submersion in a chromic acid bath for 30 minutes at 46 C, 2) submersion in a chromic acid bath for 60 minutes at 56 C, 3) submersion in a tricresyl phosphate (TCP) bath for 2 days at 107 C, or 4) UV/Ozone treated for 15 minutes. After passivation, each disc had a 400 A film of PFPE (hexafluoropropene oxide) applied to it reproducibly (+/- 20%) and uniformly (+/- 15%) using a film deposition device. The lifetimes of these films were quantified by measuring the number of sliding wear cycles required to induce an increase in the friction coefficient from an initial value characteristic of the lubricated wear couple to a final, or failure value, characteristic of an unlubricated, unpassivated wear couple. The lubricated lifetime of the 440 C couple was not altered as a result of the various passivation techniques. The resulting surface chemistry of each passivation technique was examined using X-ray Photoelectron Spectroscopy (XPS). It was found that chromic acid passivation altered the Cr to Fe ratio of the surface. TCP passivation resulted in a FePO4 layer on the surface, while UV/Ozone passivation only removed the carbonaceous contamination layer. None of the passivation techniques were found to dramatically increase the oxide film thickness.

Shogrin, Bradley A.↗
NASA NTRS1998

Ion Implantation of Perfluoropolyether-Lubricated Surfaces for Improved Tribological Performance

For over 30 years, perfluoropolyethers (PFPE's) have been the liquid lubricants of choice for space applications because of their proven tribological performance and desirable properties, such as low vapor pressure and a wide liquid temperature range. These oils are used in such space mechanisms as gyroscopes, scanning mirrors, actuators, and filter wheels. In the past few years, there have been several incidents during which PFPE-lubricated space mechanisms have shown anomalous behavior. These anomalies are thought to be the result of PFPE degradation. Investigative research focused on understanding and modeling the degradation of PFPE lubricants has shown that PFPE's degrade and lose their desirable properties while under boundary-lubricated, sliding/rolling contacts and at elevated temperatures. These performance deficiencies are strongly dependent on the surface chemistry and reactivity of the lubricated contacts, which dictate the formation of harmful catalytic by-products. One way to inhibit tribo-induced degradation may be to use passivated surfaces that do not promote the formation of harmful by-products. Such a passivated surface would inhibit PFPE degradation and increase the lifetime of the lubricated mechanism. Ion implantation is one such passivation technique. This surface-treatment technique can modify the surface properties of materials without affecting either the properties or dimensions of the bulk material beneath the treated layer. By introducing a foreign species into a submicron surface layer, ion implantation can induce unique surface microstructures.

Shogrin, Brad↗
NASA NTRS1982

Photochemistry of SO2 in the atmosphere of Io and implications on atmospheric escape

Photochemical models of Io's atmosphere are presented with the assumption that SO2 is the major gas and that the SO2 surface pressure is controlled by vapor-pressure equilibrium at the surface. Photolysis of SO2 leads to efficient production of SO, O2, S, and O. Of these products, O and S are likely to be the dominant constituents in the upper atmosphere, and the atmospheric escape is expected to be in atomic form. Nonthermal escape processes are necessary to populate the plasma torus. SO2 surface densities greater than 100-billion per cu cm are needed on the dayside to supply the required amounts of S and O to maintain the torus. Surface chemistry presents an interesting possibility, namely, the conversion of O to O2, in which case O2 will be the dominant constituent throughout the nightside and over the polar caps with a surface O2 density of 10-billion per cu cm.

Kumar, S.↗
NASA NTRS2001

Spectroscopic diagnostics of organic chemistry in the protostellar environment

A combination of astronomical observations, laboratory studies, and theoretical modelling is necessary to determine the organic chemistry of dense molecular clouds. We present spectroscopic evidence for the composition and evolution of organic molecules in protostellar environments. The principal reaction pathways to complex molecule formation by catalysis on dust grains and by reactions in the interstellar gas are described. Protostellar cores, where warming of dust has induced evaporation of icy grain mantles, are excellent sites in which to study the interaction between gas phase and grain-surface chemistries. We investigate the link between organics that are observed as direct products of grain surface reactions and those which are formed by secondary gas phase reactions of evaporated surface products. Theory predicts observable correlations between specific interstellar molecules, and also which new organics are viable for detection. We discuss recent infrared observations obtained with the Infrared Space Observatory, laboratory studies of organic molecules, theories of molecule formation, and summarise recent radioastronomical searches for various complex molecules such as ethers, azaheterocyclic compounds, and amino acids.

Ethers/analysis/chemical synthesis/chemistry↗
NASA NTRSDate not supplied

Simulation of etch pit formation through active sites in carbon fiber micro-structures

Erosion of carbon due to oxidation does not occur uniformly but through localized etch pit formation as a result of active surface sites. In this work we demonstrate a newly developed capability to capture pitting of carbon fiber microstructures such as FiberForm, which is commonly used as the base material for NASA’s spacecraft ablative thermal protection systems (TPS). The simulations are performed at the meso-scale in order to capture the pit formation and growth using direct simulation Monte Carlo (DSMC), specifically using the Stochastic PArallel Rarefied-gas Time-accurate Analyzer (SPARTA) code. Legacy and latest models both assume uniform reactivity of carbon surface sites with oxygen even at the meso-scale level. However, in reality the carbon surface has locally different reaction rates due to the presence of defects at the atomic scale. The defective nature of these sites enhances their reactivity with atmospheric gases compared to the non-defective sites (2-3 orders of magnitude) and are termed as “active sites”. Thus, these sites tend to be the first to react and eventually get removed through the formation of gasses such as CO, CO2, and CN. Their removal results in all the neighboring atoms becoming defective, thus leading to chain reaction of localized carbon removal and formation of etch pits. Capturing the formation of pits during the ablation simulation of carbon micro-structures is critical to predicting their structural failure. Recently a detailed surface chemistry framework was developed in SPARTA, capable of incorporating various reaction mechanisms such as adsorption, desorption, Eley-Rideal (ER) and Langmuir-Hinshelwood (LH) mechanisms. We have implemented the capability of a single surface having multiple site sets with different reactivities within this framework. We have used this feature to model the presence of active sites on carbon surfaces, whose reactivity is orders of magnitude higher than that of the passive sites due to the presence of defects. The active site fraction is a property of surface elements within SPARTA and is directly proportional to the local reactivity of each surface element. By introducing an initial distribution of the active site fraction across the carbon surface and propagating it in a manner that mimics the evolution of real reacting carbon surfaces, we can capture the formation and growth of etch pits as a result of surface consumption reactions such as oxidation.

DSMC↗
NASA NTRSDate not supplied

Reducing Landing Site Contamination Using 3-D Trajectory Optimization for Surface Hoppers

Rocket-powered vehicles utilizing Vertical Take-off Vertical Landing (VTVL) are a compelling alternative to surface rovers for exploring planetary and lunar bodies. These so called “hoppers” provide enhanced mobility for accessing locations difficult to reach, and over a wider region of the surface. However, contamination and plume interactions from rocket exhaust deposited at landing sites is anticipated since landing approaches are typically along a vertical direction during the final descent. Consequently, exhaust products may alter the surface chemistry, potentially confounding compositional analysis for samples collected in the vicinity of the landing site or jeopardize mining efforts. There has been no rigorous study on flight maneuvers that can mitigate plume-to-surface interactions. A multi-objective optimization tool has been developed to simulate propulsive hops on a planetary body and minimize both fuel consumption and site alterations. Trajectories are derived by multi-objective optimization and include solutions with significant reduction in contamination for a modest increase in fuel consumption. For these solutions, surface-to-surface propulsive transfer is demonstrated, but the method can also be modified for orbit-to-surface transfers (e.g., landers).

guidance↗
NASA NTRSDate not supplied

Reducing Landing Site Contamination Using 3-D Trajectory Optimization for Surface Hoppers

Rocket-powered vehicles utilizing Vertical Take-off Vertical Landing (VTVL) are a compelling alternative to surface rovers for exploring planetary and lunar bodies. These so called “hoppers” provide enhanced mobility for accessing locations difficult to reach, and over a wider region of the surface. However, contamination and plume interactions from rocket exhaust deposited at landing sites is anticipated since landing approaches are typically along a vertical direction during the final descent. Consequently, exhaust products may alter the surface chemistry, potentially confounding compositional analysis for samples collected in the vicinity of the landing site or jeopardize mining efforts. There has been no rigorous study on flight maneuvers that can mitigate plume-to-surface interactions. A multi-objective optimization tool has been developed to simulate propulsive hops on a planetary body and minimize both fuel consumption and site alterations. Trajectories are derived by multi-objective optimization and include solutions with significant reduction in contamination for a modest in-crease in fuel consumption. For these solutions, surface-to-surface propulsive transfer is demonstrated, but the method can also be modified for orbit-to-surface transfers (e.g., landers).

guidance↗
NASA NTRS1985

The origin of selected lunar geochemical anomalies Implications for early volcanism and the formation of light plains

The geochemical anomalies on the eastern limb and far side of the moon are presently identified and characterized, and their formation processes are investigated, in light of Apollo spacecraft geochemical and photogeologic remote sensing data sets. The results of recent spectral reflectance studies of dark-haloed impact craters, together with considerations of anomaly surface chemistry, indicate that the geochemical anomalies associated with light plains deposits displaying dark-haloed impact craters are due to basaltic units that are either covered by varying thicknesses of highland debris or have a surface contaminated by significant amounts of highland materials.

Hawke, B. R.↗
NASA NTRS2017

Oxygen Depletion on the Surface of Mercury: Evidence of Silicon Smelting?

The MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) spacecraft collected data that provided important insights into the structure, chemical makeup, and compositional diversity of Mercury. The X-Ray Spectrometer (XRS) and Gamma-Ray Spectrometer (GRS) onboard MESSENGER provided the first detailed chemical analyses of Mercury's surface. Among the many discoveries included several surprising characteristics about the surface of Mercury, including elevated S abundances (up to 4 percent by weight), low Fe abundances (less than 4 percent by weight), and relatively low O abundances (O/Si ratio of 1.40 plus or minus 0.03). The surface chemistry as determined by MESSENGER has been used to identify up to nine distinct geochemical terranes on Mercury. Numerous modeling and experimental efforts have been undertaken to infer the mineralogy and petrology of mercurian lavas and surface materials. However, all of these efforts have presumed valence states for each of the elements according to the following: Si4+, Ti4+, Al3+, Cr2+, Fe2+, Mn2+, Mg2+, Ca2+, Na+, K+, S2-, Cl-. Based on these valence assignments, cations are charged balanced with the anions O2-, S2-, and Cl- and the compositions are recast in terms of oxides, sulfides, and chlorides. Based on these assumptions, the geochemical terranes that have been identified on Mercury yield O/Si wt. ratios ranging from 1.61 to 1.84, which is substantially higher than the preliminary O/Si ratio of 1.40 plus or minus 0.03 determined by the MESSENGER GRS]. We have re-evaluated the O/Si ratio using the entire MESSENGER dataset to reassess its implications for the geochemistry of Mercury.

McCubbin, F. M.↗
NASA NTRS1989

Convection and chemistry effects in CVD: A 3-D analysis for silicon deposition

The computational fluid dynamics code FLUENT has been adopted to simulate the entire rectangular-channel-like (3-D) geometry of an experimental CVD reactor designed for Si deposition. The code incorporated the effects of both homogeneous (gas phase) and heterogeneous (surface) chemistry with finite reaction rates of important species existing in silane dissociation. The experiments were designed to elucidate the effects of gravitationally-induced buoyancy-driven convection flows on the quality of the grown Si films. This goal is accomplished by contrasting the results obtained from a carrier gas mixture of H2/Ar with the ones obtained from the same molar mixture ratio of H2/He, without any accompanying change in the chemistry. Computationally, these cases are simulated in the terrestrial gravitational field and in the absence of gravity. The numerical results compare favorably with experiments. Powerful computational tools provide invaluable insights into the complex physicochemical phenomena taking place in CVD reactors. Such information is essential for the improved design and optimization of future CVD reactors.

Gokoglu, S. A.↗
NASA NTRS1977

An XPS /ESCA/ study of lunar surface alteration profiles

We describe several important potential applications of surface analyses in planetology, and discuss some fundamental questions pertinent to the use of X-ray photoemission spectroscopy XPS or Auger electron spectroscopy AES to study complex powder samples. It appears that in addition to specific studies of surface chemistry, XPS may be able to provide useful major element analyses for all elements except hydrogen and perhaps helium and lithium. We provide data on the chemical changes associated with sputtering of a synthetic lunar glass. The surface is depleted in Si and enriched in Ca and Ti with Fe remaining nearly constant in parallel with changes observed during thermal volatilization. No Fe reduction was observed. Composition profiles obtained by sputtering 15301 fines suggest that surface alterations and reduced Fe are confined largely to depths of a few 100 A.

Housley, R. M.↗
NASA NTRS2011

Method for Impeding Degradation of Porous Silicon Structures

This invention relates to surface modification of porosified silicon (pSi) structures with poly(alkylene) glycols for the purpose of controlled degradation of the silicon matrix and tailored release of encapsulated substances for biomedical applications. The pSi structures are currently used in diverse biomedical applications including bio-molecular screening, optical bio-sensoring, and drug delivery by means of injectable/orally administered carriers and implantable devices. The size of the pores and the surface chemistry of the pSi structure can be controlled during the microfabrication process and thereafter. A fine regulation of the degradation kinetics of mesoporous silicon structures is of fundamental importance. Polyethylene glycols (PEGs) represent the major category of surface modifying agents used in classical drug delivery systems and in pharmaceutical dosage forms. PEGylation enables avoidance of RES uptake, thus prolonging circulation time of intravenously injectable nanovectors. PEG molecules demonstrate little toxicity and immunogenicity, and are cleared from the body through the urine (molecular weight, MW less than 30 kDa) or in the feces (MW greater than 30kDa). The invention focuses on the possibility of finely tuning the degradation kinetics of the pSi nanovectors and other structures through surface conjugation of PEGs with various backbone lengths/MWs. To prove the concept, pSi nanovectors were covalently conjugated to seven PEGs with MW from 245 to 5,000 Da and their degradation kinetics in physiologically relevant media (phosphate buffer saline, PBS pH7.4, and fetal bovine serum) was assessed by the elemental analysis of the Si using inductive coupled plasma atomic emission spectroscopy (ICP-AES). The conjugation of the PEG with lowest MW to the nanovectors surface did not induce any change in the degradation kinetics in serum, but inhibited degradation and consequently the release of orthosilicic acid into buffer. When PEGs with the longer chains were evaluated, Si mass loss from the nanovectors was slowed down, and the PEGylated structures were almost fully degraded within 18 24 hours in serum and within 48 hours in PBS. The most dramatic effect was observed for high MW PEGs 3,400 and 5,000 Da, which prominently inhibited the degradation of the systems, with complete degradation achieved only after four days. For these PEGs, during the early stages of the degradation, there was a lag period of little or no Si mass loss from the nanovector. The obtained profiles were in agreement with the erosion of the nanovector surface as observed by scanning electron microscopy.

Vilentchouk, Biana Godin↗
NASA NTRSDate not supplied

Implementation of Active Sites in DSMC to Capture Pitting of Oxidizing Carbon Materials

In this work we demonstrate a newly developed capability to capture pitting of carbon fibers in DSMC simulations, specifically using the Stochastic PArallel Rarefied-gas Time-accurate Analyzer (SPARTA) code. State-of-the-art reactive surface models in DSMC compute collision dependent carbon consumption rates (usually through desorption of CO) based on a set of surface reactions that has been derived from molecular beam experiments. The reactivity on each carbon surface element is constant in those models, such that the carbon surface recedes uniformly as a result of ablation. However, it is well known that in reality the carbon surface has locally different reaction rates due to the presence of defects at the atomic scale. These defective sites have a much higher reactivity than the average sites (2-3 orders of magnitude) and are first to react during ablation leading to its removal. This causes all the neighboring atoms to be defective and increase their reactivity, thus leading to the localized carbon removal around these ”active” sites. In this manner, these highly reactive defective sites serve as nucleation sites for the formation and growth of etch pits with potentially detrimental effects on the structural integrity. Recently a detailed surface chemistry framework was developed in SPARTA, capable of incorporating various reaction mechanisms such as adsorption, desorption, Eley-Rideal (ER) and Langmuir-Hinshelwood (LH) mechanisms. Within this framework, we have implemented the capability of a single surface having multiple site sets with different reactivities. Using this feature, we can simulate the presence of active sites on carbon surfaces, whose reactivity is much greater than an average site as a result of defects. We have implemented the active site fraction as a property of surface elements within SPARTA, which is directly proportional to the local reactivity of each surface element. By introducing an initial distribution of the active site fraction across the carbon surface, and propagating it in a manner that mimics the evolution of real reacting carbon surfaces, we are able to capture the formation and growth of etch pits as a result of surface consumption reactions such as oxidation.

DSMC↗
NASA NTRS1976

The metal to metal interface and its effect on adhesion and friction

The paper considers the interface between two bulk metals and the effect of this interface on adhesive bonding, resistance to tangential displacements, friction and the interfacial transport from one surface to another. Using Auger emission spectroscopy, field ion microscopy, and low energy electron diffraction techniques, the influence of surface orientation, lattice registry, crystal lattice structure and defects, metal surface chemistry and alloying on the characteristics of the interface was studied for noble, platinum, transition, and Group 4B metals. With dissimilar metals in contact, epitaxial transfer of the cohesively weaker to the cohesively stronger metal has been observed. Surface chemical activity of the noble and platinum metals is shown to affect interfacial behavior as does a valence bonding in the transition metals, and the degree of metallic nature in the Group 4B elements. Alloying elements, e.g., Si and Fe, can alter interfacial behavior by segregation to the surface of metals or by altering bulk properties such as crystal transformation kinetics.

Buckley, D. H.↗