SEARCH · Search NASA

Results for “surface construction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

DOE OSTI2025

A novel closed-form inversion of the convection–diffusion equation for rapid convection, diffusion, and source profile estimation

To simplify and routinize particle transport analysis in fusion devices, a novel closed form linear inversion of the 1-D convection diffusion equation to estimate diffusion and convection profiles D(r ⃗ ), v(r ⃗ ) and source distribution s(r ⃗ ), of a single species from measured data is derived and demonstrated on synthetic data. Profile estimates of D(r ⃗ ), v(r ⃗ ), s(r ⃗ ) and their uncertainties are given as a matrix expression constructed directly from the incoming density data of the transported species in space and time, as well as physics assumptions such as particle conservation and experimental geometry. The derived matrix expression can be applied to a pumped or non-pumped recycling species, or a non-recycling species that is effectively “pumped” by plasma-facing surfaces.

Hinson, Edward [ORNL] (ORCID:000000019713140X)↗

DOE OSTI2024

Design of a Meso-Scale Test of a Fracture Thermal Energy Storage (FTES) System

This paper will present the characterization, scaling, and design of an intermediate-scale field test of a fracture thermal energy storage system (FTES). Seasonal storage of thermal energy has the potential to both significantly reduce the total energy requirements for heating and cooling of buildings, but also allow for the flexibility to store thermal energy from intermittent sources. With approximately half of global energy consumption currently being used for heating and cooling, this represents an important path to reducing greenhouse gas (GHG) emissions. The concept of FTES is to drill two or more wells into a low permeability formation, generally at a depth of less than a few hundred meters, and then generate hydraulic fractures to create flow paths for water to circulate between the wells. Hot or cold thermal energy can then be stored in the surrounding rock mass by circulating hot or cold water through the fractures, which will heat or cool the rock mass. To recover the stored energy, ambient temperature water can be then circulated through the fractures, which will then be heated or cooled by the rock mass. Fractures inherently have a very large ratio of surface area to volume. This allows for very high heat fluxes to and from the rock mass to be achieved despite the relatively low thermal conductivity of most geologic formations. Because large fractures can be made with low-cost equipment and with only inexpensive and environmentally safe materials such as water and sand, the cost to construct even large FTES systems is expected to be quite low. This paper will present what the performance requirements, size, and operating conditions of a full-scale system to operate a commercial building. The paper will describe how these full-scale system characteristics will be used as a design basis for an intermediate-scale FTES test to be conducted at the Sanford Underground Research Facility (SURF) in Lead, SD.

Burghardt, Jeffrey A.↗

DOE OSTI2025

Development of a Transferable Density-Functional Tight-Binding Model for Organic Molecules at the Water/Platinum Interface

A computationally efficient and transferable approach for modeling reactions at metal/water interfaces could significantly accelerate our understanding and ultimately the development of new catalytic transformations, particularly in the context of the emerging field of biomass conversion. Here, we present a parametrization of Pt–X (X = H, O, C) density-functional tight-binding (DFTB) for addressing this need. We first constructed Pt–H, Pt–O, and Pt–C repulsive potential splines. These pairwise parameters were then augmented to include many-body interactions using the Chebyshev Interaction Model for Efficient Simulation (ChIMES). We compare the geometrical and energetic performances of both DFTB and DFTB/ChIMES methods with DFT reference data across a variety of organic molecules at the platinum surface from nanoparticles to single-crystal surfaces. DFTB shows limited transferability between extended crystal surfaces and small nanoparticles. This transferability is significantly improved through the introduction of three-body interactions with Pt in DFTB/ChIMES, which provides consistent results across various systems, with reductions in the RMSD from around 30 kcal/mol in DFTB to around 10 kcal/mol. We demonstrate the stability and reliability of the obtained parameters by performing metadynamic simulations for the adsorption of phenol on Pt(111). We observe that DFTB itself is undersolvating the surface, leading to only one or two chemisorbed water molecules in a c(4 × 6) unit cell. In contrast, DFTB/ChIMES leads to a coverage of about 0.5 ML and successfully captures the chemisorbed mode of phenol at both the solid/liquid and the solid/gas interfaces. Furthermore, in agreement with experimental measurements, the adsorption at the solid/liquid interface is significantly weaker than that at the solid/gas interface. As a result, we highlight that even with DFTB, where we can accumulate dynamics for more than 1 ns for a given system, the simulations are not fully converged.

Adsorption↗

DOE OSTI2024

Data-driven background model for the CUORE experiment

Here, we present the model we developed to reconstruct the CUORE radioactive background based on the analysis of an experimental exposure of 1038.4 kg yr. The data reconstruction relies on a simultaneous Bayesian fit applied to energy spectra over a broad energy range. The high granularity of the CUORE detector, together with the large exposure and extended stable operations, allow for an in-depth exploration of both spatial and time dependence of backgrounds. We achieve high sensitivity to both bulk and surface activities of the materials of the setup, detecting levels as low as 10 nBq kg −1 and 0.1 nBq cm −2 , respectively. We compare the contamination levels we extract from the background model with prior radio-assay data, which informs future background risk mitigation strategies. The results of this background model play a crucial role in constructing the background budget for the CUPID experiment as it will exploit the same CUORE infrastructure.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2024

An efficient construction of nano-interfaces for excellent coking tolerance of cermet anodes

Solid oxide fuel cells (SOFCs) are promising energy conversion devices for the effective and convenient utilization of hydrocarbons (for example, methane) to electricity. However, the development of direct methane SOFCs is primarily hindered by the poor coking tolerance of the state-of-the-art Ni-based cermet anodes. Herein, we efficiently construct nano-interfaces in the anode by infiltrating a Ni 0.6 Y 0.064 Zr 0.336 O 2-δ (NYZ) catalyst onto the traditional Ni-based cermet anode to effectively enhance the coking tolerance. After being reduced in H 2 , Ni and Y 0.16 Zr 0.84 O 2-δ (YSZ) nanoparticles (NPs) are in situ formed on the surface of the Ni-YSZ substrate. The roughened anode demonstrates significantly improved fuel oxidation activity and coking tolerance, due likely to the formation of nano-interfaces. Specifically, when applied in the Ni-YSZ-based anode-supported SOFCs, a high peak power density of 1.785 W cm –2 and a stable operation of ~ 240 h with no observable degradation is achieved at 750 °C in nearly dry methane (3% H 2 O). Finally, a density functional theory study suggests that the excellent coking tolerance is attributed to the formation of OH species on Ni/YSZ nano-interfaces, which would further interact with intermediate carbon species to generate COH intermediates.

30 DIRECT ENERGY CONVERSION↗

DOE OSTI2025

Tokamak Disruption Simulation (Final Technical Report)

The Tokamak Disruption Simulation collaboration was a SciDAC (Scientific Discovery through Advanced Computing) program led by Xianzhu Tang of the Los Alamos National Laboratory but with separate grants to each institution. I was the PI for Columbia University and the only person at Columbia directly funded by this SciDAC. Disruptions are a sudden loss of confinement in tokamaks, and a reliable method of preventing disruptions must be developed before tokamak fusion power plants become feasible. A related plasma confinement concept, the stellarator, is the only way known way of preventing disruptions with the required reliability. The largest devices, both existing and under construction, for confining plasmas for fusion using magnetic fields are tokamaks, so it is important to solve their disruption issues. The sudden loss of confinement in tokamaks can be from a bit of material falling into the plasma, which causes the plasma energy to be quickly lost by radiation, or by an instability causing a breakup of the confining surfaces formed by the magnetic field. This breakup can occur more than a million times faster than one would naively think possible. The sudden breakup of surfaces is called a fast magnetic reconnection and also results in a sudden cooling of the plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Stabilizing Nickel‐Rich Cathodes in Aqueous Process through Nanocellulose as Water Barrier

Nickel-rich LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NMC 811) cathode offers high voltage and high specific capacity, making it promising for high energy density batteries. However, large-scale manufacturing of aqueous-processed NMC 811 electrodes remains challenging due to proton exchange causing material decomposition and capacity loss. This work addresses this issue by constructing an in situ nanocellulose protective layer for NMC 811 particles via electrostatic interactions during the slurry preparation. For the first time, the interatomic spacing between inter-chains of nanocellulose is measured through wide-angle X-ray scattering and demonstrate the ability to effectively confine interlayer water using atomistic simulations. Moreover, this nanocellulose coverage simultaneously minimizes Li + surface segregation and mitigates water infiltration. Owing to less material decomposition during the aqueous processing, nanocellulose-protected NMC electrodes exhibit higher initial coulombic efficiency (83% vs 62% at 0.1C) and capacity (133 vs 59 mAh g −1 at 6C) than unprotected electrodes. Additionally, optimized aqueous-processed NMC electrodes offer comparable or even superior electrochemical properties compared to the electrodes fabricated using the conventional toxic organic solvent, N-methyl-2-pyrrolidone. Consequently, the developed approach enables affordable, sustainable aqueous processing for Nickel-rich NMC 811 cathodes with excellent electrochemical performances.

25 ENERGY STORAGE↗

DOE OSTI2024

Efficient learning of accurate surrogates for simulations of complex systems

Machine learning methods are increasingly deployed to construct surrogate models for complex physical systems at a reduced computational cost. However, the predictive capability of these surrogates degrades in the presence of noisy, sparse or dynamic data. Here, we introduce an online learning method empowered by optimizer-driven sampling that has two advantages over current approaches: it ensures that all local extrema (including endpoints) of the model response surface are included in the training data, and it employs a continuous validation and update process in which surrogates undergo retraining when their performance falls below a validity threshold. We find, using benchmark functions, that optimizer-directed sampling generally outperforms traditional sampling methods in terms of accuracy around local extrema even when the scoring metric is biased towards assessing overall accuracy. Finally, the application to dense nuclear matter demonstrates that highly accurate surrogates for a nuclear equation-of-state model can be reliably autogenerated from expensive calculations using few model evaluations.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2026

3D reconstruction and neural rendering for adversarial machine learning

While evasion attacks on computer vision systems have been widely studied, creating attacks that remain effective under significant changes in viewpoint continues to be challenging. Traditional approaches often rely on affine transformations of images, but these approaches degrade at larger perspective shifts and often produce unrealistic or ineffective perturbations. Recent methods use differentiable renderers to improve viewpoint robustness, but they typically depend on manually constructed 3D models. We introduce a semi-automated pipeline that generates physically printable and perspective-invariant adversarial patches using only a small set of 2D images. Our method integrates 3D reconstruction, neural rendering, adversarial patch optimization, and an object detection victim model into a unified workflow. We use 2D Gaussian Splatting for high fidelity mesh reconstruction and FlexPara for surface parameterization that produces texture maps suitable for patch editing. Together, these components form a fully differentiable pipeline in PyTorch3D that links texture modification to model outputs, enabling efficient optimization of patches that remain effective across many viewpoints. The complete process, from image capture to patch printing and physical evaluation, can be completed within a few hours. We demonstrate the effectiveness of the resulting patches through attacks on the YOLOv8 object detection model and discuss remaining challenges and opportunities for improving robustness and scalability.

Singhvi, Vivaan [ORNL] (ORCID:0009000586288221)↗

DOE OSTI2025

Nonlocal, Pattern-Aware Response and Feedback Framework for Regional Climate Response

We devise a pattern-aware feedback framework for representing the forced climate response using a suite of Green’s function experiments with solar radiation perturbations. By considering the column energy balance, a comprehensive linear response function (CLRF) for important climate variables and feedback quantities such as moist static energy, sea surface temperature, albedo, cloud optical depth, and lapse rate is learned from Green’s function data. The learned CLRF delineates the effects of the energy diffusion in both the ocean and atmosphere and the pattern-aware feedbacks from the aforementioned radiatively active processes. The CLRF can then be decomposed into forcing–response mode pairs, which are in turn used to construct a reduced-order model describing the dominant dynamics of climate responses. These mode pairs capture nonlocal effects and teleconnections in the climate and thus make the reduced-order model apt for capturing regional features of climate response. A key observation is that the CLRF captures the polar-amplified response as the most excitable mode of the climate system, and this mode is explainable in the data-learned pattern-aware feedback framework. The reduced-order model can be used for predicting the response for a given forcing and for reconstructing the forcing from a given response; we demonstrate these capabilities for multiple independent forcing scenarios.

Feedback↗

DOE OSTI2025

Au assisted smooth ultrathin epitaxial ZnO film grown by pulsed laser deposition on sapphire(0001)

High quality ZnO has applications in photonics and electronics. Literature has shown that continuous, but rough ZnO film can be grown on sapphire substrate by pulsed laser deposition (PLD). In this work, ZnO and Au were co-deposited by PLD on sapphire(0001) substrates from a single ZnO target overlaid with an Au strip that serves as a catalyst. The reflection high-energy electron diffraction (RHEED) patterns show paired double stripes from sample of ZnO-Au where the difference of in-plane lattice parameters between ZnO and Au is 11.4 %. The two-dimensional (2D) reciprocal space maps constructed from azimuthal RHEED (ARHEED) patterns reveal parallel epitaxial relationship between ZnO and Au in the continuous ZnO-Au film on sapphire substrate. Transmission electron microscopy (TEM) cross section images and energy dispersive spectroscopy maps show a minute amount of Au nanocrystals distributed in the entire ultrathin ZnO film. Atomic force microscopy shows the root-mean-square roughness of the surface of ultrathin ZnO film with Au is in the sub-nm range. The ARHEED and TEM results show that a couple of atomic percentages of Au co-deposited with ZnO catalyzes the growth of smooth ultrathin epitaxial ZnO film.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Compatibilization Strategy and Mechanism for Co-stabilizing Commingled Plastics and Pyrolyzed Rubber in Asphalt

Hot mix asphalt mixture is considered the ideal approach to reuse waste plastics in high-value applications because of its very high amount of usage in highway construction. However, the differences in polarity and density between polymers and asphalt lead to polymer coalescence and therefore the poor storage stability of modified asphalt. These challenges are exalted when recycling commingled plastics. This study introduced an innovative compatibilization strategy and mechanism for co-stabilizing commingled plastics and pyrolyzed rubber in asphalt. Commingled plastics were first grafted with maleic anhydride for surface activation, followed by reactive kneading with pyrolyzed rubber and crosslinking agent to form an integrated thermoplastic elastomer (ITPE) for asphalt modification. The mechanical, thermal, and interfacial behaviors of the ITPE were evaluated through tensile testing, thermogravimetric analysis, and scanning electron microscopy. The storage stability and rheological properties of the modified binder blends were evaluated through the cigar tube test and dynamic shear rheometer testing. Results demonstrated a successful formation of imide bonds in the ITPE, which can improve the strength, ductility, and thermal stability of rubber–plastic composites. Appropriate utilization of crosslinking agents can improve both rutting and fatigue resistance of ITPE-modified asphalt with good storage stability because of the co-existence of rigid plastic and soft rubbery regimes and the formation of a crosslink network. Furthermore, excessive content of crosslinker led to severe phase separation and reduced storage stability of modified binder blends. Extra crosslinker tended to float in asphalt because of its low density and caused an excessive formation of the crosslink network in the top section of the asphalt.

asphalt binder modifiers↗

DOE OSTI2026

Measuring the neutrino-oxygen neutral current quasielastic cross section using the accelerator neutrino neutron interaction experiment

The Accelerator Neutrino Neutron Interaction Experiment (ANNIE) is a 26-ton gadolinium-doped water Cherenkov detector located on-axis to Fermilab’s Booster Neutrino Beam (BNB). ANNIE is uniquely positioned to perform high-statistics measurements of neutrino-nucleus interactions in water, benefiting from a large neutrino flux due to a short (100-meter) baseline. A central focus of ANNIE’s physics program is the measurement of both charged current (CC) and neutral current (NC) cross sections on water, including neutral current quasielastic (NCQE) and CC-inclusive channels. The NCQE measurement is particularly critical for constraining uncertainties in rare-event searches such as the Diffuse Supernova Neutrino Background (DSNB), where atmospheric $\nu$NCQE interactions constitute a significant and poorly constrained background. This dissertation presents a measurement of the flux-averaged neutrino-oxygen neutral current quasielastic ($\nu$NCQE) cross section using $2.573 \times 10^{20}$~POT of BNB exposure from the 2022 and 2023 beam years. The $\nu$NCQE interaction is identified through the primary $\gamma$-rays produced by nuclear de-excitation of the residual $^{15}$N$^*$ or $^{15}$O$^*$ nucleus following nucleon knockout from $^{16}$O. A dedicated Monte Carlo (MC) re-tuning campaign was conducted using an americium-beryllium (AmBe) calibration source, Michel electrons from stopped muons, and throughgoing dirt muons originating upstream of the detector. This multi-sample approach provided a wide-ranging $\mathcal{O}(\text{MeV})$--$\mathcal{O}(\text{GeV})$ dataset for tuning the simulated detector response, which was subsequently validated against AmBe neutron and Michel electron data for use in the $\nu$NCQE analysis. A dedicated laser calibration campaign was carried out to reduce timing uncertainties across the PMT system, enabling reconstruction of the BNB bunch substructure with sufficient resolution to serve as a background rejection tool. By selecting events in-time with individual neutrino bunches, beam-correlated $\nu$NCQE events are separated from diffuse and accelerator-induced backgrounds, notably skyshine neutrons and externally-originating events, that would otherwise dominate traditional charge-based selections within a small-scale, surface-level, short-baseline detector. A data-driven estimation of the skyshine neutron and external background rates was performed and incorporated into the systematic uncertainty budget. The flux-averaged $\nu$NCQE cross section on oxygen is measured to be $1.57 \pm 0.06\,(\text{stat.})$ $^{+0.91}_{-0.67}\,(\text{syst.})$ $\times 10^{-38}\ \text{cm}^{2}$. A full systematic budget is constructed by propagating uncertainties in the secondary hadronic interaction modeling, background cross section normalizations, detector response, neutrino flux, and the primary $\gamma$-ray emission probabilities from oxygen nuclear de-excitation. An idealized de-excitation model, constructed from existing measurements in the literature is developed to benchmark the predictions of the \textsc{GENIE} event generator. A comparison reveals that \textsc{GENIE} systematically overpredicts the primary $\gamma$-ray emission probability from oxygen de-excitation by a factor of $1.49\times$ for $E_\gamma > 6$~MeV and $3.07\times$ in the $3$--$6$~MeV band. This comparison motivates the dominant systematic uncertainty in this analysis, where a conservative uncertainty of $^{+39.9\%}_{-0\%}$ on the primary $\gamma$-ray signal prediction is assigned. The ANNIE result is consistent with and complementary to existing flux-averaged $\nu$NCQE cross section measurements from T2K and Super-Kamiokande, providing an independent measurement with a different detector, neutrino beam, and analysis methodology. Looking ahead, an upgrade to the ANNIE DAQ infrastructure enabling continuous extended readout will allow a complementary $\nu$NCQE neutron multiplicity measurement, directly relevant to constraining the NCQE background in DSNB searches, competitive with the recent T2K measurement at SK-Gd. The planned Super-SANDI upgrade, deploying a large Water-based Liquid Scintillator (WbLS) volume, will further extend ANNIE's reach to hadronic final states and exclusive NC channels, and enable joint measurements with liquid argon detectors sharing the BNB beamline ahead of DUNE and Hyper-Kamiokande.

Doran, Steven [Iowa State U.]↗

DOE OSTI2024

Commissioning of a modulated pulse-power magnetron sputtering system for depositing niobium thin films

A modulated pulse-power magnetron sputtering system (MPPMS) was commissioned and used to deposit niobium on copper. MPPMS utilizes a modulated pulse train with high peak-to-average energy ratios, thereby increasing the energy density leading to the production of the energetic ions. The MPPMS modulator was designed and constructed based on large voltage/current IGBT modules, which can be externally modulated, produce bi-polar waveforms, and are readily available. A high voltage power supply provides moderate current to the IGBT module to create the precise pulse structure. The MPPMS system was used to deposit ~1 mm thick, niobium film on a copper substrate held at ~77 K to minimize Nb atom surface diffusion and maximize intrinsic film energy. Finally, the Nb film had an average grain size of ~8 nm.

42 ENGINEERING↗

DOE OSTI2025

Geometric Delocalization in Two Dimensions

We demonstrate the existence of transient two-dimensional surfaces where a random-walking particle escapes to infinity in contrast to localization in standard flat two-dimensional space. We first prove that any rotationally symmetric two-dimensional membrane embedded in flat three-dimensional space cannot be transient. Then we formulate a criterion for the transience of a general asymmetric two-dimensional membrane. We use it to explicitly construct a class of transient two-dimensional manifolds with a nontrivial metric and height function but “zero average curvature,” which we dub “tablecloth manifolds.” The absence of the logarithmic infrared divergence of the Laplace-Beltrami operator in turn implies the absence of weak localization, nonexistence of bound states in shallow potentials, and breakdown of the Mermin-Wagner theorem and Kosterlitz-Thouless transition on the tablecloth manifolds, which may be realizable in both quantum simulators and corrugated two-dimensional materials.

Anderson localization↗

DOE OSTI2025

Decoding Antenna Behavior in Metal—Organic Frameworks

Metal–organic frameworks (MOFs) define a solid-state platform for developing artificial photosystems. Efficient anisotropic exciton migrations in these frameworks entail “antenna behavior” that can power up the distal interior reaction centers (RC), driving charge separation between donor-acceptor pairs. Reminiscent of the natural light-harvesting complex, such processes can achieve high quantum yield by exploiting the vast interior surface of the porous crystallites. It is important to understand the optimum positioning of the RC site relative to the anisotropic exciton migration path within these frameworks. The efficiency of such antenna behavior is probed here through Stern–Volmer (SV) type analysis with a series of node-anchored redox quenchers, ferrocene-carboxylate, ferrocene acetate, and dinitrobenzoate. Decoding various intrinsic processes, this work constructs a revised SV formalism in solid assembly that hosts ultrafast anisotropic exciton migration to account for the intrinsic exciton hopping rate from the extrinsic electron transfer rate, and the dimension of effective quenching. In conclusion, this transformative understanding can be applied to other relevant solid-state assemblies.

Saha, Bapan [Southern Illinois University, Carbond↗

DOE OSTI2024

Regulating the surface Pt coordination environment in the PtN overlayers on PtCuN hollow nanospheres for efficient oxygen reduction reaction

Engineering the surface Pt coordination environment is a promising strategy for promoting the kinetically sluggish oxygen reduction reaction (ORR) on Pt-based catalysts. Here, in this study, we achieve the compressive strain effect and electronic effect by Cu and N co-doping to synthesize the PtCuN hollow nanospheres with PtN overlayers (PtCuN@PtN HNSs) using a facile solvothermal synthesis. Electrochemical investigations show that the constructed disordered Pt–N coordination structures effectively facilitate the ORR and stabilize Pt atoms in the compressed lattice, whereas an excessive N-doping can lead to the formation of a structurally unstable Pt nitride phase. Theoretical analyses confirm that the oxygen reduction kinetics on the compressed PtN overlayers are regulated by a synergistic effect resulting from N-doping and lattice compression, circumventing the traditional linear scaling relationships (LSR). The optimized PtCuN@PtN HNSs, with the composition of PtCu 0.29 N 1.1 , demonstrate an area-specific activity of 1.98 mA cm –2 and a mass-specific activity of 1.81 A mg Pt –1 .

36 MATERIALS SCIENCE↗

DOE OSTI2025

Characterization of Arsenic and Selenium in Coal Fly Ash to Improve Evaluations for Disposal and Reuse Potential (Final Technical Report)

Coal fly ash is a high volume waste material that is discarded in landfills and surface water impoundments across the U.S. and is also widely recycled for a variety of applications. The leaching of potential of contaminants of concern, such as arsenic (As) and selenium (Se), is often the driver of risk assessments for coal ash disposal and reuse. The extent of leachable As and Se depends on several factors related to environmental conditions and fly ash characteristics. Previous studies employed various methods to delineate the concentration, chemical form, and distribution of As and Se in fly ash materials. However, few studies have attempted to directly correlate these properties to mobilization parameters relevant to disposal and reuse. Instead, the coal residuals industries often rely upon standardized leaching protocols that can be laborious or involve hazardous chemicals. The goals of the project were to: 1) Develop and evaluate a characterization protocol that can be used to screen fly ash samples for leachability of As and Se; 2) Characterize As, Se, and associated constituents of fly ash particles at multiple length scales (nanometer to micrometer) to determine if elemental associations differ as a function of the resolution of characterization; and 3) Establish a predictive model for the chemical composition of coal ash produced annually at major U.S. coal fired power facilities on 50-year national coal supply records. For the first objective, we performed leaching experiments with 52 fly ash samples collected from 15 different U.S. power plants and representing coal feedstocks from the three major domestic coal regions. For this work, we assessed the mobilization potential of As and Se in fly ash based on standardized leaching protocols and performed multivariate and lasso regression analyses to explore correlations of leachable As and Se contents with characteristics such as major element contents, loss on ignition (LOI) and pH. The results of regression models indicated that major elements (Fe, Ca, Al) for a wide range of fly ashes can serve as predictor variables for the leaching potential of As, but not for Se. LOI and pH were not important predictive variables in the models. Both regression approaches resulted in relatively strong fits for leachable As (correlation coefficient R 2 = 0.78 for both models) compared to models for leachable Se (R 2 = 0.49). Overall, these results suggest that correlation models combined with on-site elemental analysis with portable analyzers may enable a screening method for leachable As in coal ash. For the second objective, we utilized nanoscale 2-D imaging (30-50 nm spot size) with the Hard X-ray Nanoprobe (HXN) in combination with microprobe X-ray capabilities (~5 µm resolution) to determine As and Se elemental associations in fly ash particles. Speciation of As and Se was also measured at the nano- to microscale with X-ray absorption spectroscopy. The enhanced resolution of HXN showed As and Se that were diffusely located around or comingled with Ca- and Fe-rich particles. The results also showed nanoparticles of Se attached to the surface of fly ash grains. Overall, a comparison of As and Se species across scales highlights the heterogeneity and complexity of chemical associations for these trace elements of concern in coal fly ash. For the final objective, we developed a predictive model for major element composition of coal ash in reserve at disposal sites of major U.S. coal fired power plants. This model was constructed from coal purchase records of 705 power stations from 1973-2022 and was trained on coal ash composition data showing that coal ash elemental composition is strongly associated with the source of feedstock coal. The model showed regional shifts in the major element contents of ash produced by power plants in the last 50 years, particularly for calcium and iron (expressed as %CaO and %Fe 2 O 3 ), as coal-fired power stations changed their source of coal over this time frame. Our approach enables an estimation of coal ash chemical composition that is stored in waste impoundments at individual power stations. Such information can help delineate the regional market potential for material applications that would utilize coal ash harvested from disposal sites across the U.S.

01 COAL, LIGNITE, AND PEAT↗