Search NASA⌕ Search

SEARCH · Search NASA

Results for “systemic signalling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Validation of the IRI-2016 model with Indian NavIC data for future navigation applications

The position accuracy of Navigation with Indian Constellation (NavIC) system is affected by several sources of errors. Among them, the Ionospheric Time Delay (ITD) error is the most predominant one which depends upon the total electron content (TEC) present in the ionosphere. The ITD variations are more intense over low latitude regions due to the equatorial anomaly effects. Hence, modelling of ITD error is necessary. The International Reference Ionosphere (IRI)-2016 model is one of the standard global ionospheric models to estimate the Vertical TEC (VTEC). This paper discusses about the VTEC deviations due to the IRI-2016 model over low latitude Hyderabad station, Indian region using NavIC, Global Positioning System and Global Navigation Satellite System signals at corresponding Ionospheric Pierce Point latitude and longitudes for all months and various Kp indices during the low solar activity year 2017. In this work, cross correlation coefficient, the metric norm (L2N), Symmetric Kullbacke Leibler Distance metrics are used to evaluate the performance of IRI-2016 model TEC with NavIC, GPS and GLONASS data. From the results, it is found that TEC predicted by the IRI-2016 model produced smaller estimation errors with NavIC data over Indian region. The obtained results will be helpful for future updates of IRI model.

42 ENGINEERING↗
DOE OSTI2022

Nonlinear quantum behavior of ultrashort-pulse optical parametric oscillators

The quantum features of ultrashort-pulse optical parametric oscillators (OPOs) are investigated theoretically in the nonlinear regime near and above threshold. Viewing the pulsed OPO as a multimode open quantum system, we rigorously derive a general input-output model that features nonlinear coupling among many cavity (i.e., system) signal modes and a broadband single-pass (i.e., reservoir) pump field. Under appropriate assumptions, our model produces a Lindblad master equation with multimode nonlinear Lindblad operators describing two-photon dissipation and a multimode four-wave-mixing Hamiltonian describing a broadband, dispersive optical cascade, which we show is required to preserve causality. To simplify the multimode complexity of the model, we employ a supermode decomposition to perform numerical simulations in the regime where the pulsed supermodes experience strong single-photon nonlinearity. We find that the quantum nonlinear dynamics induces pump depletion as well as corrections to the below-threshold squeezing spectrum predicted by linearized models. We also observe the formation of non-Gaussian states with Wigner-function negativity and show that the multimode interactions with the pump, both dissipative and dispersive, can act as effective decoherence channels. Finally, we briefly discuss some experimental considerations for potentially observing such quantum nonlinear phenomena with ultrashort-pulse OPOs on nonlinear nanophotonic platforms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

OsWRKY21 and OsWRKY108 function redundantly to promote phosphate accumulation through maintaining the constitutive expression of OsPHT1;1 under phosphate‐replete conditions

Summary Plant Phosphate Transporter 1 (PHT1) proteins, probably the only influx transporters for phosphate (Pi) uptake, are partially degraded on sufficient Pi levels to prevent excessive Pi accumulation. Therefore, the basal/constitutive expression level of PHT1 genes is vital for maintaining Pi uptake under Pi‐replete conditions. Rice ( Oryza sativa ) OsPHT1;1 is a unique gene as it is highly expressed and not responsive to Pi, however the mechanism for maintaining its basal/constitutive expression remains unknown. Using biochemical and genetic approaches, we identified and functionally characterised the transcription factors maintaining the basal/constitutive expression of OsPHT1;1 . OsWRKY21 and OsWRKY108 interact within the nucleus and both bind to the W‐box in the OsPHT1;1 promoter. Overexpression of OsWRKY21 or OsWRKY108 led to increased Pi accumulation, resulting from elevated expression of OsPHT1;1 . By contrast, oswrky21 oswrky108 double mutants showed decreased Pi accumulation and OsPHT1;1 expression in a Pi‐dependent manner. Moreover, similar to ospht1;1 mutants, plants expressing the OsWRKY21–SRDX fusion protein (a chimeric dominant suppressor) were impaired in Pi accumulation in Pi‐replete roots, accompanied by downregulation of OsPHT1;1 expression. Our findings demonstrated that rice WRKY transcription factors function redundantly to promote Pi uptake by activating OsPHT1;1 expression under Pi‐replete conditions, and represent a novel pathway independent of the central Pi signalling system.

Zhang, Jun↗
DOE OSTI2023

Immune activation during Pseudomonas infection causes local cell wall remodeling and alters AGP accumulation

The plant cell boundary generally comprises constituents of the primary and secondary cell wall (CW) that are deposited sequentially during development. Although it is known that the CW acts as a barrier against phytopathogens and undergoes modifications to limit their invasion, the extent, sequence, and requirements of the pathogen-induced modifications of the CW components are still largely unknown, especially at the level of the polysaccharide fraction. To address this significant knowledge gap, we adopted the compatible Pseudomonas syringae–Arabidopsis thaliana system. We found that, despite systemic signaling actuation, Pseudomonas infection leads only to local CW modifications. Furthermore, by utilizing a combination of CW and immune signaling-deficient mutants infected with virulent or non-virulent bacteria, we demonstrated that the pathogen-induced changes in CW polysaccharides depend on the combination of pathogen virulence and the host's ability to mount an immune response. This results in a pathogen-driven accumulation of CW hexoses, such as galactose, and an immune signaling-dependent increase in CW pentoses, mainly arabinose, and xylose. Our analyses of CW changes during disease progression also revealed a distinct spatiotemporal pattern of arabinogalactan protein (AGP) deposition and significant modifications of rhamnogalacturonan sidechains. Furthermore, genetic analyses demonstrated a critical role of AGPs, specifically of the Arabinoxylan Pectin Arabinogalactan Protein1, in limiting pathogen growth. Collectively, our results provide evidence for the actuation of significant remodeling of CW polysaccharides in a compatible host-pathogen interaction, and, by identifying AGPs as critical elements of the CW in plant defense, they pinpoint opportunities to improve plants against diverse pathogens.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Mechanochromic Palettes of Cholesteric Liquid Crystal Elastomers for Visual Signaling

Mechanochromic photonic materials present promising prospects for enhancing diverse facets of human life. Cholesteric liquid crystal elastomers (CLCEs) present immediate mechanochromic properties, allowing their utility in various fields, including camouflages, textiles, and anticounterfeiting. Nonetheless, it is essential to provide differentiated color information corresponding to diverse types and degrees of deformation for practical use in real life. Herein, we investigate the mechanochromic responses of CLCEs using their optical rotation under compression and uniaxial stretching. The CLCEs exhibit the same reflection colors indistinguishable for compression and uniaxial stretching due to their contracted pitches. In contrast, the linearly polarized light passing through deformed CLCEs can be modulated by optical rotation, resulting in distinct transmission colors that can be discerned through mechanical deformations. We demonstrate a visual signaling system with color information derived from optical rotation. By comprehending and manipulating the mechanoresponsive behavior of CLCEs, we can advance these materials into innovative solutions with enhanced functionality and performance, thereby broadening their applications for human life enhancement.

36 MATERIALS SCIENCE↗
NASA NTRS1971

Kaleidoscopic light feedback for television systems

Technique generates special effects for broadcast television to study effects of light feedback on television systems. Signals are produced for tape recording, broadcasting, or displaying on black-and-white or color monitors. The patterns have from three to eight sides and expand, contract, or rotate at various speeds.

Davis, J. G.↗
NASA NTRS1971

Digital adaptive sampling.

Discussion of digital adaptive sampling, which is consistently better than fixed sampling in noise-free cases. Adaptive sampling is shown to be feasible and, it is considered, should be studied further. It should be noted that adaptive sampling is a class of variable rate sampling in which the variability depends on system signals. Digital rather than analog laws should be studied, because cases can arise in which the analog signals are not even available. An extremely important problem is implementation.

Breazeale, G. J.↗
NASA NTRS1974

Electronic high pass filter

Ultra accurate filter is used with static type pressure transducers where it is desirable to extract low frequency dynamic signals from combined static and dynamic signal. System can be calibrated at any time with dc voltages.

Peterson, V. S.↗
NASA NTRS1974

Landing approach evaluation of an integrated CRT display for general aviation aircraft

A flight director adaptable to general aviation aircraft was evaluated for the landing approach task in a twin turbojet business aircraft. The flight director combined aircraft heading, pitch and roll atitude, and ILS (Instrument Landing System) signals into a single picture on a small cathode ray tube (CRT) to give the pilot an integrated picture of the aircraft situation. The display is unique in that it presents the information on a CRT and gives quasi-command signals to the pilot. The particular display investigated was a preproduction version of the Kaiser Model FP-50 flight director. Approaches made with visual references only, with a conventional ILS displacement instrument, and with the CRT display were compared in terms of tracking performance and pilot workload. Tracking performance of three research pilots using the CRT display was superior to that using the conventional ILS instrument and comparable to that under VFR conditions. Pilot workload (based on pilot comments) was not clearly decreased.

Talbot, P. D.↗
NASA NTRS1974

Development and modification of a digital program for final approach to landing

The development and implementation of a dynamic digital computer simulator which may be used to evaluate aircraft performance when operating under the control and guidance of various navigation, landing, and flight control systems are discussed. The digital computer program may be used to simulate and evaluate the relationships and interactions between various factors such as the microwave landing system, avionics receivers and onboard processors, aircraft aerodynamics, aircraft automatic control systems, control surfaces, and wind and other external effects. The models used to represent aircraft aerodynamics, control system and control surfaces; weather and wind effects; and the microwave landing system are described. Example results are presented for a simulation of a Boeing 737 using two sample control systems while subjected to various atmospheric conditions and microwave landing system errors. The limitations and performance capabilities of these control systems are discussed in terms of their ability to utilize the microwave landing system signal.

Duff, W. G.↗
NASA NTRS1982

Pulsed multiwavelength laser ranging system

A pulsed multiwavelength laser ranging system for measuring atmospheric delay was built and tested, and its theoretical performance limits were calculated. The system uses a dye modelocked ND:YAG laser, which transmits 70 psec wide pulses simultaneously at 1064, 532, and 355 nm. The differential delay of the 1064 and 355 nm pulses is measured by a specially calibrated waveform digitizer to estimate the dry atmospheric delay. The delay time of the 532 nm pulse is used to measure the target distance. Static crossed field photomultipliers are used as detectors for all wavelengths. Theoretical analysis shows that path curvature and atmospheric turbulence are fundamental limits to the ranging accuracy of both single and multicolor systems operating over horizontal paths. For two color systems, an additional error is caused by the uncertainty in the path averaged water vapor. The standard deviation of the multicolor instrument's timing measurements is directly proportional to the laser pulse width plus photomultiplier jitter divided by the square root of the received photoelectron number. The prototype system's maximum range is km, which is limited by atmospheric and system transmission losses at 355 nm. System signal detection and false alarm calculations are also presented.

Abshire, J. B.↗
NASA NTRS1983

Hue-saturation-intensity split-spectrum processing of Seasat radar imagery

Characteristics of terrain features in orbital radar imagery are investigated on the basis of radar physics and the human visual system. Signal scattering, the dominant factor in radar imagery, is caused by look angle and relief displacement. Power spectra characteristics are explored, noting that surface scattering dominates the low frequencies and slope significantly affects the high frequency tone variations. The maximum human visual response has been identified for achromatic scenes as 7 cycles per degree, whereas in radar imagery the low frequency half-power point occurs near 2.5 cycles/deg. Image feature size at a scale of 1:500,000 has been calculated for the maximum human response at 1.25 km. A hue-saturation-intensity transformation is presented for displaying two or three data sets on the same image and is demonstrated for Seasat SAR imagery. The transformation is shown to restore low spatial frequencies to the SAR imagery in order to identify terrain features which would otherwise not be visually discernible.

Daily, M.↗
NASA NTRS1984

Network ST radar and related measurements at Pennsylvania State University

Mesoscale meteorological measurements, analysis and prediction are some of the principal areas of research in the Department of Meteorology at Penn State. In anticipation of a staged turn-on of the three systems during the Summer and Fall of 1984, the nonconstruction-related efforts have focused on the software development necessary to allow essentially immediate use of network data. A 16-bit microcomputer has been programmed to serve as the network controller, communications interface and, at least for real-time purposes, the operational display system. Insofar as possible we have in this task built upon our substantial accumulated experience in working with the processing and display of Doppler sodar system signals. Once the radar-derived wind and turbulence profiles are communicated to the various interconnected Departmental computers they become just one component of a comprehensive data base which can be applied to a diverse set of ongoing basic and operational research programs.

Thomson, D. W.↗
NASA NTRS1986

Optical Monitoring of Weld Penetration

Robotic welding controlled by reliable, relatively-noise-free optoelectronic unit. Bounding off meniscus of pool of molten metal, laser beam impinges on position-sensitive photodetector. Beam diameter adjusted for width of weld. Optical filters screen out light from arc. Made from small, low-cost components and utilizing optical fibers to conduct signals, system immune to electromagnetic interference common in industrial environments. Aimed for automatic welders, robot welders in particular and also adaptable to other types of welding, including tungsten/inert-gas, laser, and electron-beam techniques.

Maram, J.↗
NASA NTRS1986

Progress in coherent laser radar

Considerable progress with coherent laser radar has been made over the last few years, most notably perhaps in the available range of high performance devices and components and the confidence with which systems may now be taken into the field for prolonged periods of operation. Some of this increasing maturity was evident at the 3rd Topical Meeting on Coherent Laser Radar: Technology and Applications. Topics included in discussions were: mesoscale wind fields, nocturnal valley drainage and clear air down bursts; airborne Doppler lidar studies and comparison of ground and airborne wind measurement; wind measurement over the sea for comparison with satellite borne microwave sensors; transport of wake vortices at airfield; coherent DIAL methods; a newly assembled Nd-YAG coherent lidar system; backscatter profiles in the atmosphere and wavelength dependence over the 9 to 11 micrometer region; beam propagation; rock and soil classification with an airborne 4-laser system; technology of a global wind profiling system; target calibration; ranging and imaging with coherent pulsed and CW system; signal fluctuations and speckle. Some of these activities are briefly reviewed.

Vaughan, J. M.↗
NASA NTRS1986

Flying complex approach paths using the microwave landing system

A piloted simulation study was conducted to examine the requirements for using electromechanical flight instrumentation to provide guidance for manually controlled flight along complex, curved approach paths within the microwave landing system signal coverage. The data from these tests indicated that flight director guidance is required for the manually controlled flight of a jet transport airplane on complex, curved approach paths. Each of the three guidance algorithms tested could be used to fly the paths. However, pilot comments indicated that the use of guidance based on capturing the next straight path segment may not be acceptable since full-scale lateral deflections normally resulted during turns. Pilot comments indicated that all the approach paths tested could be used in normal airline operations. Approach paths with both multiple, sequential turns and short final path segments were demonstrated.

Knox, Charles E.↗