Search NASA⌕ Search

SEARCH · Search NASA

Results for “three dimensional models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

Molecular Hydrogen in Diffuse Interstellar Clouds of Arbitrary Three-Dimensional Geometry

We have constructed three-dimensional models for the equilibrium abundance of molecular hydrogen in diffuse interstellar clouds of arbitrary geometry that are illuminated by ultraviolet radiation. The position-dependent photodissociation rate of H2 in such clouds was computed with a 26 ray approximation to model the attenuation of the incident ultraviolet radiation field by dust and by H2 line absorption. We have applied our modeling technique to the isolated diffuse cloud G236+39, assuming that the cloud has a constant density and that the thickness of the cloud along the line of sight is at every point proportional to the 100 micron continuum intensity measured by IRAS. We find that our model can successfully account for observed variations in the ratio of 100 micron continuum intensity to H I column density, with larger values of that ratio occurring along lines of sight in which the molecular hydrogen fraction is expected to be the largest. Using a standard chi square analysis to assess the goodness of fit of our models, we find (at the 60 a level) that a three-dimensional model is more successful in matching the observational data than a one-dimensional model in which the geometrical extent of the cloud along the line of sight is assumed to be much smaller than its extent in the plane of the sky. If D is the distance to G236 + 39, and given standard assumptions about the rate of grain-catalyzed H2 formation, we find that the cloud has an extent along the line of sight that is 0.9 +/- 0.1 times its mean extent projected onto the plane of the sky and a gas density of 53 +/- 8 (100 pc/D) H nuclei/cc and is illuminated by a radiation field of 1.1 +/- 0.2 (100 pc/D) times the mean interstellar radiation field. The derived 100 micron emissivity per nucleon is 1.13 +/- 0.06 x 10(exp -20) MJy/sr sq cm.

Spaans, Marco↗
NASA NTRS2000

Three-Dimensional Electron Optics Model Developed for Traveling-Wave Tubes

A three-dimensional traveling-wave tube (TWT) electron beam optics model including periodic permanent magnet (PPM) focusing has been developed at the NASA Glenn Research Center at Lewis Field. This accurate model allows a TWT designer to develop a focusing structure while reducing the expensive and time-consuming task of building the TWT and hot-testing it (with the electron beam). In addition, the model allows, for the first time, an investigation of the effect on TWT operation of the important azimuthally asymmetric features of the focusing stack. The TWT is a vacuum device that amplifies signals by transferring energy from an electron beam to a radiofrequency (RF) signal. A critically important component is the focusing structure, which keeps the electron beam from diverging and intercepting the RF slow wave circuit. Such an interception can result in excessive circuit heating and decreased efficiency, whereas excessive growth in the beam diameter can lead to backward wave oscillations and premature saturation, indicating a serious reduction in tube performance. The most commonly used focusing structure is the PPM stack, which consists of a sequence of cylindrical iron pole pieces and opposite-polarity magnets. Typically, two-dimensional electron optics codes are used in the design of magnetic focusing devices. In general, these codes track the beam from the gun downstream by solving equations of motion for the electron beam in static-electric and magnetic fields in an azimuthally symmetric structure. Because these two-dimensional codes cannot adequately simulate a number of important effects, the simulation code MAFIA (solution of Maxwell's equations by the Finite-Integration-Algorithm) was used at Glenn to develop a three-dimensional electron optics model. First, a PPM stack was modeled in three dimensions. Then, the fields obtained using the magnetostatic solver were loaded into a particle-in-cell solver where the fully three-dimensional behavior of the beam was simulated in the magnetic focusing field. For the first time, the effects of azimuthally asymmetric designs and critical azimuthally asymmetric characteristics of the focusing stack (such as shunts, C-magnets, or magnet misalignment) on electron beam behavior have been investigated. A cutaway portion of a simulated electron beam focused by a PPM stack is illustrated.

Kory, Carol L.↗
NASA NTRS1984

Remanent magnetization and 3-dimensional density model of the Kentucky anomaly region

A three-dimensional model of the Kentucky body was developed to fit surface gravity and long wavelength aeromagnetic data. Magnetization and density parameters for the model are much like those of Mayhew et al (1982). The magnetic anomaly due to the model at satellite altitude is shown to be much too small by itself to account for the anomaly measured by Magsat. It is demonstrated that the source region for the satellite anomaly is considerably more extensive than the Kentucky body sensu stricto. The extended source region is modeled first using prismatic model sources and then using dipole array sources. Magnetization directions for the source region found by inversion of various combinations of scalar and vector data are found to be close to the main field direction, implying the lack of a strong remanent component. It is shown by simulation that in a case (such as this) where the geometry of the source is known, if a strong remanent component is present its direction is readily detectable, but by scalar data as readily as vector data.

Mayhew, M. A.↗
NASA NTRS2000

Linear and Nonlinear Analysis of Magnetic Bearing Bandwidth Due to Eddy Current Limitations

Finite element analysis was used to study the bandwidth of alloy hyperco50a and silicon iron laminated rotors and stators in magnetic bearings. A three dimensional model was made of a heteropolar bearing in which all the flux circulated in the plane of the rotor and stator laminate. A three dimensional model of a plate similar to the region of a pole near the gap was also studied with a very fine mesh. Nonlinear time transient solutions for the net flux carried by the plate were compared to steady state time harmonic solutions. Both linear and quasi-nonlinear steady state time harmonic solutions were calculated and compared. The finite element solutions for power loss and flux bandwidth were compared to those determined from classical analytical solutions to Maxwell's equations.

Kenny, Andrew↗
NASA NTRS1972

The physics of the neutral upper atmosphere.

Particular attention is given to models of the upper atmosphere that deal with the diurnal variation and the latitudinal density dependence. The upper atmosphere is considered as essentially an ideal gas, or rather a weakly ionized plasma, where physical and chemical processes of considerable complexity take place. The final goal for the theoretical models of the upper atmosphere is to derive the time and space dependence of the physical quantities density, composition, temperature, pressure, and state of motion by theoretical considerations from basic physical assumptions. Questions of the dynamics of the upper atmosphere are discussed together with one- and two-dimensional models of the upper atmosphere, three-dimensional models, the geomagnetic effect, and the semiannual density variation.

Blum, P.↗
NASA NTRS1980

Analytical study of twin-jet shielding

An analytical model a three-dimensional model, of twin-jet shielding, consisting of a point noise source impinging on a cylinder of heated flow in which the temperature and flow velocity are uniform across the cross-section is discussed. Wave equations are given for the regions outside the flow and within the flow cylinder and solutions are matched at the jet boundary under the conditions of continuity of pressure and continuity of the vortex sheet. The model was analyzed to identify mechanisms of transmission and diffraction which control sheilding in the shadow of the shielding jet. It was found that in the zone of the shadow region dominates, shielding is relatively insensitive to variations of such parameters as Mach Number and spacing ratio, but in the zone in which diffraction dominates; shielding is more sensitive to variations in Mach Number, jet temperature and spacing ratio.

Gerhold, C. H.↗
NASA NTRS1983

Quasi-axisymmetric circulation and superrotation in planetary atmospheres

Atmospheric superrotation is ubiquitous in the solar system, and numerous theoretical models have been proposed to describe the effect. However, no model is fully accepted. Problems are primarily related to an understanding of the angular momentum and the energy budgets. In connection with the present investigation, attention is given to hybrid models, where three-dimensional models may describe eddy processes and two-dimensional symmetric models may describe the global scale circulation in the framework of a viscous medium. It is believed that the concept of an axisymmetric circulation is still useful. It is the main purpose of the current investigation to explore some of the properties of the circulation in planetary atmospheres. It is assumed that the eddy transports are downgradient or diffusive in nature. Energy and momentum are perceived to cascade from the global scale circulation driven by the sun to the smaller scale eddies which in turn determine the diffusive properties. A numerical model of the Venusian circulation is presented, and results are discussed for different conditions of static stability.

Mayr, H. G.↗
NASA NTRS1996

Subsonic Wing Optimization for Handling Qualities Using ACSYNT

The capability to accurately and rapidly predict aircraft stability derivatives using one comprehensive analysis tool has been created. The PREDAVOR tool has the following capabilities: rapid estimation of stability derivatives using a vortex lattice method, calculation of a longitudinal handling qualities metric, and inherent methodology to optimize a given aircraft configuration for longitudinal handling qualities, including an intuitive graphical interface. The PREDAVOR tool may be applied to both subsonic and supersonic designs, as well as conventional and unconventional, symmetric and asymmetric configurations. The workstation-based tool uses as its model a three-dimensional model of the configuration generated using a computer aided design (CAD) package. The PREDAVOR tool was applied to a Lear Jet Model 23 and the North American XB-70 Valkyrie.

Soban, Danielle Suzanne↗
NASA NTRS2003

Upward And Downward Flame Spreading And Extinction In Partial Gravity Environments

The premise of this research effort has been to begin exploring the gap in the literature between studies of material flammability and flame spread phenomena in normal-gravity and those conducted in the microgravity environment, with or without forced flows. From a fundamental point of view, flame spreading in upward (concurrent) buoyant flow is considerably different from concurrent forced flow. The flow accelerates throughout the length of the buoyant flame bringing the streamlines and the flame closer to the fuel surface and strengthening the interaction between the flame and fuel. Forced flows are diverted around the flame and away from the fuel surface, except where the flow might be constrained by a finite duct. The differences may be most clearly felt as the atmospheric conditions, viz. pressure or oxygen content, approach the flammability limit. From a more practical point of view, flame spreading and material flammability behavior have not been studied under the partial gravity conditions that are the natural state in space exploration destinations such as the Moon and Mars. This effort constitutes the beginning of the research needed to engineer fire safety provisions for such future missions. In this program we have performed partial-gravity experiments (from 0.1 to 1 g/g(sub Earth)) considering both upward and downward flame spread over thin solid fuels aboard the NASA KC-135 aircraft. In those tests, the atmospheric pressure and the fuel sample width were varied. Steady flame spread rates and approximate extinction boundaries were determined. Flame images were recorded using video cameras and two-dimensional fuel surface temperature distributions were determined using an IR camera. These results are available, and complement our earlier work in downward spread in partial gravity varying oxygen content. In conjunction with the experiment, three-dimensional models of flame spreading in buoyant flow have been developed. Some of the computed results on upward spreading have been presented. A derivative three-dimensional model of downward spreading has been developed. It is currently being used to evaluate the standard limiting oxygen index (LOI) measuring device and its potential performance in different gravity levels.

Sacksteder, Kurt R.↗
NASA NTRS1978

Continuum modeling of three-dimensional truss-like space structures

A mathematical and computational analysis capability has been developed for calculating the effective mechanical properties of three-dimensional periodic truss-like structures. Two models are studied in detail. The first, called the octetruss model, is a three-dimensional extension of a two-dimensional model, and the second is a cubic model. Symmetry considerations are employed as a first step to show that the specific octetruss model has four independent constants and that the cubic model has two. The actual values of these constants are determined by averaging the contributions of each rod element to the overall structure stiffness. The individual rod member contribution to the overall stiffness is obtained by a three-dimensional coordinate transformation. The analysis shows that the effective three-dimensional elastic properties of both models are relatively close to each other.

Nayfeh, A. H.↗
NASA NTRS2007

Global Observations - The Key to Model Development and Improved Assessments

One application of global models is to predict the response of stratospheric ozone to changes in composition and climate. The recent international ozone assessment included results from three-dimensional models with interactions among the dynamical, photochemical and radiative processes that all influence ozone behavior. The physical basis of such models is far more realistic than that of either the one-dimensional (single profile) models of the 1970's and early 1980's or the two-dimensional (latitude height) models of the late 1980's and 1990's. Observations have played a key role in the model development at all stages. This talk will highlight the role of observations in inspiring broad model improvements that have grown from the effort to reproduce observed relationships or processes, for example the correlations between long-lived constituents seen in aircraft data and the deep unmixed descent of mesospheric air into the winter polar vortices seen from satellite. The talk will also trace the evolution of model evaluation from contour plots showing 'good agreement' to the more rigorous process-oriented evaluation of three-dimensional models that is becoming the norm using the wealth of space-based observations obtained from the late 1970's until present.

Douglass, Anne R.↗
NASA NTRS1981

The three dimensional spherical model for the AGCE

The development of accurate numerical model of the atmospheric general circulation experiment (AGCE) is discussed. The model will serve both as a design and diagnostic tool for the AGCE, as well as for conducting numerical experiments which otherwise cannot be performed by AGCE. The code in its final form will solve the complete three dimensional nonlinear Navier-Stokes energy equations with the Boussinesq approximation. The code will allow for any thermal boundary conditions and any external forcing in the form of rotation and body forces and will allow for variable thermodynamic coefficients.

Antar, B. N.↗
NASA NTRS1985

Modelisation of the optical scattering behaviour of the vegetation canopies

The three dimensional model of Kimes (1984) which can treat three dimensional variability in heterogeneous scenes, was used to test and expand physical scattering mechanisms involved in reflectance distribution dynamics by analyzing modeling and field data. The major physical phenomena causing the directional scattering behavior of vegetation canopies are presented. These include the strong anisotropic properties of the soil, and the anisotropic scattering properties of the vegetation as described by the phase function of the leaves and the geometric effects caused by vertical layers of leaves. This knowledge serves as a basis for defining optimum directional view angles for remote sensing strategies. An example on using knowledge of the scattering behavior of vegetation to develop techniques for extracting vegetation parameters (spectral albedo) from directional reflectance data is presented.

Kimes, D. S.↗
NASA NTRS1983

Stereo imaging with spaceborne radars

Stereo viewing is a valuable tool in photointerpretation and is used for the quantitative reconstruction of the three dimensional shape of a topographical surface. Stereo viewing refers to a visual perception of space by presenting an overlapping image pair to an observer so that a three dimensional model is formed in the brain. Some of the observer's function is performed by machine correlation of the overlapping images - so called automated stereo correlation. The direct perception of space with two eyes is often called natural binocular vision; techniques of generating three dimensional models of the surface from two sets of monocular image measurements is the topic of stereology.

Leberl, F.↗
NASA NTRS2017

Computational Simulations of the NASA Langley HyMETS Arc-Jet Facility

The Hypersonic Materials Environmental Test System (HyMETS) arc-jet facility located at the NASA Langley Research Center in Hampton, Virginia, is primarily used for the research, development, and evaluation of high-temperature thermal protection systems for hypersonic vehicles and reentry systems. In order to improve testing capabilities and knowledge of the test article environment, an effort is underway to computationally simulate the flow-field using computational fluid dynamics (CFD). A detailed three-dimensional model of the arc-jet nozzle and free-jet portion of the flow-field has been developed and compared to calibration probe Pitot pressure and stagnation-point heat flux for three test conditions at low, medium, and high enthalpy. The CFD model takes into account uniform pressure and non-uniform enthalpy profiles at the nozzle inlet as well as catalytic recombination efficiency effects at the probe surface. Comparing the CFD results and test data indicates an effectively fully-catalytic copper surface on the heat flux probe of about 10% efficiency and a 2-3 kpa pressure drop from the arc heater bore, where the pressure is measured, to the plenum section, prior to the nozzle. With these assumptions, the CFD results are well within the uncertainty of the stagnation pressure and heat flux measurements. The conditions at the nozzle exit were also compared with radial and axial velocimetry. This simulation capability will be used to evaluate various three-dimensional models that are tested in the HyMETS facility. An end-to-end aerothermal and thermal simulation of HyMETS test articles will follow this work to provide a better understanding of the test environment, test results, and to aid in test planning. Additional flow-field diagnostic measurements will also be considered to improve the modeling capability.

Brune, A. J.↗
NASA NTRS1993

An algebraic turbulence model for three-dimensional viscous flows

An algebraic turbulence model is proposed for use with three-dimensional Navier-Stokes analyses. It incorporates features of both the Baldwin-Lomax and Cebeci-Smith models. The Baldwin-Lomax model uses the maximum of a function f(y) to determine length and velocity scales. An analysis of the Baldwin-Lomax model shows that f(y) can have a spurious maximum close to the wall, causing numerical problems and non-physical results. The proposed model uses integral relations to determine delta(*) u(sub e) and delta used in the Cebeci-Smith mode. It eliminates a constant in the Baldwin-Lomax model and determines the two remaining constants by comparison to the Cebeci-Smith formulation. Pressure gradient effects, a new wake model, and the implementation of these features in a three-dimensional Navier-Stokes code are also described. Results are shown for a flat plate boundary layer, an annular turbine cascade, and endwall heat transfer in a linear turbine cascade. The heat transfer results agree well with experimental data which shows large variations in endwall Stanton number contours with Reynolds number.

Chima, R. V.↗
NASA NTRS1993

An algebraic turbulence model for three-dimensional viscous flows

An algebraic turbulence model is proposed for use with three-dimensional Navier-Stokes analyses. It incorporates features of both the Baldwin-Lomax and Cebeci-Smith models. The Baldwin-Lomax model uses the maximum of a function f(v) to determine length and velocity scales. An analysis of the Baldwin-Lomax model shows that f(v) can have a spurious maximum close to the wall, causing numerical problems and non-physical results. The proposed model uses integral relations to determine delta(*) u(sub e) and delta used in the Cebeci-Smith mode. It eliminates a constant in the Baldwin-Lomax model and determines the two remaining constants by comparison to the Cebeci-Smith formulation. Pressure gradient effects, a new wake model, and the implementation of these features in a three-dimensional Navier-Stokes code are also described. Results are shown for a flat plate boundary layer, an annular turbine cascade, and endwall heat transfer in a linear turbine cascade. The heat transfer results agree well with experimental data which shows large variations in endwall Stanton number contours with Reynolds number.

Chima, R. V.↗
NASA NTRS1989

A three dimensional gasdynamic model for solar wind flow past nonaxisymmetric magnetospheres - Application to Jupiter and Saturn

The gasdynamic convected magnetic field model of Spreiter et al. (1966) and Spreiter and Stahara (1985) for predicting solar wind flow past a planetary magnetoionopause obstacle is extended to three dimensions and applied to Jupiter and Saturn, in which the effects of rapid spin, large size, and ring current phenomena are believed to result in broadening of their magnetospheres near the planetary equatorial plane. The computational procedures of the model are described, and the calculated results are presented for a number of magnetospheres of elliptic cross sections with values ranging from 1 to 2 for the ratio a/b between the major (equatorial) and minor (polar) axes. For Jupiter, the results indicate a broadening to a/b of about 1.754, a value consistent with previous estimates determined from independent calculations. For Saturn, a smaller broadening to a/b of about 1.25 is indicated.

Stahara, S. S.↗