Search NASA⌕ Search

SEARCH · Search NASA

Results for “trajectory planning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Autonomous Rover Traverse and Precise Arm Placement on Remotely Designated Targets

This software controls a rover platform to traverse rocky terrain autonomously, plan paths, and avoid obstacles using its stereo hazard and navigation cameras. It does so while continuously tracking a target of interest selected from 10 20 m away. The rover drives and tracks the target until it reaches the vicinity of the target. The rover then positions itself to approach the target, deploys its robotic arm, and places the end effector instrument on the designated target to within 2-3-cm accuracy of the originally selected target. This software features continuous navigation in a fairly rocky field in an outdoor environment and the ability to enable the rover to avoid large rocks and traverse over smaller ones. Using point-and-click mouse commands, a scientist designates targets in the initial imagery acquired from the rover s mast cameras. The navigation software uses stereo imaging, traversability analysis, path planning, trajectory generation, and trajectory execution. It also includes visual target tracking of a designated target selected from 10 m away while continuously navigating the rocky terrain. Improvements in this design include steering while driving, which uses continuous curvature paths. There are also several improvements to the traversability analyzer, including improved data fusion of traversability maps that result from pose estimation uncertainties, dealing with boundary effects to enable tighter maneuvers, and handling a wider range of obstacles. This work advances what has been previously developed and integrated on the Mars Exploration Rovers by using algorithms that are capable of traversing more rock-dense terrains, enabling tight, thread-the-needle maneuvers. These algorithms were integrated on the newly refurbished Athena Mars research rover, and were fielded in the JPL Mars Yard. Forty-three runs were conducted with targets at distances ranging from 5 to 15 m, and a success rate of 93% was achieved for placement of the instrument within 2-3 cm of the target.

Nesnas, Issa A.↗
NASA NTRS2012

Autonomous Operations Planner: A Flexible Platform for Research in Flight-Deck Support for Airborne Self-Separation

The Autonomous Operations Planner (AOP), developed by NASA, is a flexible and powerful prototype of a flight-deck automation system to support self-separation of aircraft. The AOP incorporates a variety of algorithms to detect and resolve conflicts between the trajectories of its own aircraft and traffic aircraft while meeting route constraints such as required times of arrival and avoiding airspace hazards such as convective weather and restricted airspace. This integrated suite of algorithms provides flight crew support for strategic and tactical conflict resolutions and conflict-free trajectory planning while en route. The AOP has supported an extensive set of experiments covering various conditions and variations on the self-separation concept, yielding insight into the system s design and resolving various challenges encountered in the exploration of the concept. The design of the AOP will enable it to continue to evolve and support experimentation as the self-separation concept is refined.

Karr, David A.↗
NASA NTRS2013

Analysis of Traffic Conflicts in a Mixed-Airspace Evaluation of Airborne Separation Assurance

A pair of human-in-the-loop simulation evaluations of a distributed air/ground separation assurance system have been conducted to investigate the function allocation between humans and automation systems as well as ground-based and airborne agents in the Next Generation Air Transportation System and beyond. This paper focuses on an analysis of certain critical conflicts observed between self-separating aircraft and ground-managed traffic in the same airspace. The principal cause of each conflict is identified and potential mitigations are discussed, such as: the sharing of trajectory intent information between the ground and the air; more cautious trajectory planning by the self-separating aircraft; and more equitable rules-of-the-road between the self-separating aircraft and ground-managed aircraft. This analysis will inform the ongoing design of an airborne separation assurance automation tool.

Lewis, Timothy A.↗
NASA NTRS2014

An Adaptive Nonlinear Aircraft Maneuvering Envelope Estimation Approach for Online Applications

A nonlinear aircraft model is presented and used to develop an overall unified robust and adaptive approach to passive trim and maneuverability envelope estimation with uncertainty quantification. The concept of time scale separation makes this method suitable for the online characterization of altered safe maneuvering limitations after impairment. The results can be used to provide pilot feedback and/or be combined with flight planning, trajectory generation, and guidance algorithms to help maintain safe aircraft operations in both nominal and off-nominal scenarios.

nonlinearity↗
NASA NTRS2011

Martian Atmospheric Modeling of Scale Factors for MarsGRAM 2005 and the MAVEN Project

For spacecraft missions to Mars, especially the navigation of Martian orbiters and landers, an extensive knowledge of the Martian atmosphere is extremely important. The generally-accepted NASA standard for modeling (MarsGRAM), which was developed at Marshall Space Flight Center. MarsGRAM is useful for task such as aerobraking, performance analysis and operations planning for aerobraking, entry descent and landing, and aerocapture. Unfortunately, the densities for the Martian atmosphere in MarsGRAM are based on table look-up and not on an analytical algorithm. Also, these values can vary drastically from the densities actually experienced by the spacecraft. This does not have much of an impact on simple integrations but drastically affects its usefulness in other applications, especially those in navigation. For example, the navigation team for the Mars Atmosphere Volatile Environment (MAVEN) Project uses MarsGRAM to target the desired atmospheric density for the orbiter's pariapse passage, its closet approach to the planet. After the satellite's passage through pariapsis the computed density is compared to the MarsGRAM model and a scale factor is assigned to the model to account for the difference. Therefore, large variations in the atmosphere from the model can cause unexpected deviations from the spacecraft's planned trajectory. In order to account for this, an analytic stochastic model of the scale factor's behavior is desired. The development of this model will allow for the MAVEN navigation team to determine the probability of various Martian atmospheric variations and their effects on the spacecraft.

Martian atmosphere↗
NASA NTRS2011

Cassini Orbit Trim Maneuvers at Saturn - Overview of Attitude Control Flight Operations

The Cassini spacecraft has been in orbit around Saturn since July 1, 2004. To remain on the planned trajectory which maximizes science data return, Cassini must perform orbit trim maneuvers using either its main engine or its reaction control system thrusters. Over 200 maneuvers have been executed on the spacecraft since arrival at Saturn. To improve performance and maintain spacecraft health, changes have been made in maneuver design command placement, in accelerometer scale factor, and in the pre-aim vector used to align the engine gimbal actuator prior to main engine burn ignition. These and other changes have improved maneuver performance execution errors significantly since 2004. A strategy has been developed to decide whether a main engine maneuver should be performed, or whether the maneuver can be executed using the reaction control system.

spacecraft configuration↗
NASA NTRS2015

Operator Informational Needs for Multiple Autonomous Small Vehicles

With the anticipated explosion of small unmanned aerial vehicles, it is highly likely that operators will be controlling fleets of autonomous vehicles. To fulfill the promise of autonomy, vehicle operators will not be concerned with manual control of the vehicle; instead, they will deal with the overall mission. Furthermore, the one operator to many vehicles is becoming a constant meme with various industries including package delivery, search and rescue, and utility companies. In order for an operator to concurrently control several vehicles, his station must look and behave very differently than the current ground control station instantiations. Furthermore, the vehicle will have to be much more autonomous, especially during non-normal operations, in order to accommodate the knowledge deficit or the information overload of the operator in charge of several vehicles. The expected usage increase of small drones requires presenting the operational information generated by a fleet of heterogeneous autonomous agents to an operator. NASA Langley Research Center's Autonomy Incubator has brought together researchers in various disciplines including controls, trajectory planning, systems engineering, and human factors to develop an integrated system to study autonomy issues. The initial human factors effort is focusing on mission displays that would give an operator the overall status of all autonomous agents involved in the current mission. This paper will discuss the specifics of the mission displays for operators controlling several vehicles.

Trujillo, Anna C.↗
NASA NTRS2016

Solar Array at Very High Temperatures: Ground Tests

Solar array design for any spacecraft is determined by the orbit parameters. For example, operational voltage for spacecraft in Low Earth Orbit (LEO) is limited by significant differential charging due to interactions with low temperature plasma. In order to avoid arcing in LEO, solar array is designed to generate electrical power at comparatively low voltages (below 100 V) or to operate at higher voltages with encapsulated of all suspected discharge locations. In Geosynchronous Orbit (GEO) differential charging is caused by energetic electrons that produce differential potential between coverglass and conductive spacecraft body in a kilovolt range. In such a case, weakly conductive layer over coverglass (ITO) is one of possible measures to eliminate dangerous discharges on array surface. Temperature variations for solar arrays in both orbits are measured and documented within the range of -150 C +110 C. This wide interval of operational temperatures is regularly reproduced in ground tests with radiative heating and cooling inside shroud with flowing liquid nitrogen. The requirements to solar array design and tests turn out to be more complicated when planned trajectory crosses these two orbits and goes closer to Sun. Conductive layer over coverglass causes sharp increase in parasitic current collected from LEO plasma, high temperature may cause cracks in encapsulating material (RTV), radiative heating of coupon in vacuum chamber becomes practically impossible above 150 C, conductivities of glass and adhesive go up with temperature that decrease array efficiency, and mechanical stresses grow up to critical magnitudes. A few test arrangements and respective results are presented in current paper. Coupons were tested against arcing in simulated LEO and GEO environments under elevated temperatures up to 200 C. The dependence of leakage current on temperature was measured, and electrostatic cleanness was verified for coupons with antireflection (AR) coating over ITO layer.

differential charging↗
NASA NTRS2016

Solar Array at Very High Temperatures: Ground Tests

Solar array design for any spacecraft is determined by the orbit parameters. For example, operational voltage for spacecraft in Low Earth Orbit (LEO) is limited by significant differential charging due to interactions with low temperature plasma. In order to avoid arcing in LEO, solar array is designed to generate electrical power at comparatively low voltages (below 100 volts) or to operate at higher voltages with encapsulation of all suspected discharge locations. In Geosynchronous Orbit (GEO) differential charging is caused by energetic electrons that produce differential potential between the coverglass and the conductive spacecraft body in a kilovolt range. In such a case, the weakly conductive layer over coverglass, indium tin oxide (ITO) is one of the possible measures to eliminate dangerous discharges on array surface. Temperature variations for solar arrays in both orbits are measured and documented within the range of minus150 degrees Centigrade to plus 1100 degrees Centigrade. This wide interval of operational temperatures is regularly reproduced in ground tests with radiative heating and cooling inside a shroud with flowing liquid nitrogen. The requirements to solar array design and tests turn out to be more complicated when planned trajectory crosses these two orbits and goes closer to the Sun. The conductive layer over coverglass causes a sharp increase in parasitic current collected from LEO plasma, high temperature may cause cracks in encapsulating (Room Temperature Vulcanizing (RTV) material; radiative heating of a coupon in vacuum chamber becomes practically impossible above 1500 degrees Centigrade; conductivities of glass and adhesive go up with temperature that decrease array efficiency; and mechanical stresses grow up to critical magnitudes. A few test arrangements and respective results are presented in current paper. Coupons were tested against arcing in simulated LEO and GEO environments under elevated temperatures up to 2000 degrees Centigrade. The dependence of leakage current on temperature was measured, and electrostatic cleanness was verified for coupons with antireflection (AR) coating over the indium tin oxide (ITO) layer.

differential charging↗
NASA NTRS2017

Real-Time Risk Assessment Framework for Unmanned Aircraft System (UAS) Traffic Management (UTM)

The new Federal Aviation Administration (FAA) Small Unmanned Aircraft rule (Part 107) marks the first national regulations for commercial operation of small unmanned aircraft systems (sUAS) under 55 pounds within the National Airspace System (NAS). Although sUAS flights may not be performed beyond visual line-of-sight or over non- participant structures and people, safety of sUAS operations must still be maintained and tracked at all times. Moreover, future safety-critical operation of sUAS (e.g., for package delivery) are already being conceived and tested. NASA's Unmanned Aircraft System Trac Management (UTM) concept aims to facilitate the safe use of low-altitude airspace for sUAS operations. This paper introduces the UTM Risk Assessment Framework (URAF) which was developed to provide real-time safety evaluation and tracking capability within the UTM concept. The URAF uses Bayesian Belief Networks (BBNs) to propagate off -nominal condition probabilities based on real-time component failure indicators. This information is then used to assess the risk to people on the ground by calculating the potential impact area and the effects of the impact. The visual representation of the expected area of impact and the nominal risk level can assist operators and controllers with dynamic trajectory planning and execution. The URAF was applied to a case study to illustrate the concept.

Ancel, Ersin↗
NASA NTRS2013

Solar System Escape Architecture for Revolutionary Science

Our most distance spacecraft, Voyager 1 and Voyager 2, recently reached the boundary of the solar system known as the Heliopause. Beyond this boundary lies interstellar space, and, at tremendous distance, the stars. The Voyager spacecraft have shown us that the Heliopause is a dynamic, rapidly changing environment, varying greatly as the fields and effects emanating from the sun are met by a host of forces pushing in from our nearby galactic neighborhood. This is the region we aim to explore. Specifically we aim to develop a mission architecture and spacecraft concept capable of reaching the Heliopause (approximately100 AU (Astronomical Units)) region in multiple directions of interest, with a variety of scientific instrument suites, within a reasonable timeframe (about 15 years.) This report details our Phase 1 work including science goal definition, trajectory planning, technology research, mission planning, instrument selection, spacecraft design, and more. We present an architecture employing a 250-meter by 250-meter solar sail with a 175 kilogram spacecraft. This spacecraft could carry a variety of instrument suites depending on the destination, time, and other factors. The spin-stabilized spacecraft would powered by a small radioisotope power system (about 20 watts), makes use of an optical communication system, and carries 3 extensible booms for instrument accommodation as visible in the sketch and rendering below. We conclude that it would be reasonable to implement the architecture described herein in the 2020-2030 timeframe based on likely near-term technological and material advances. We are confident that cruise times of around 15 years could be achieved to science-rich destinations. This report details the approach we used to come to these conclusions and identifies some of the steps along the way. We utilized a variety of methodologies involving our full capability at JPL (Jet Propulsion Laboratory) - from small point studies to large collaborative engineering processes. This paper also describes potential industry partnerships and costing information, and includes the methods used to account for our project’s significant deviation from any prior mission in the NASA costing tool database. Outreach and public engagement is an important part of NASA activities. We engaged in several different forms of this outreach and describe them in this report. We conclude with some open questions and a summary of activities we hope to engage in with Phase 2 funding. The entire team would like to thank the NIAC (NASA Innovative Advanced Concepts) program for the opportunity to investigate this fascinating and challenging concept. The Voyager program gives us tantalizing clues as to the nature and behavior of the Heliopause – the boundary between the sun’s influence and the interstellar medium. This information comes from forty-year old instruments designed to study the outer planets. A targeted Heliopause investigation would give insight into the formation of the solar system, the role of the sun in the local interstellar neighborhood, and contribute to human exploration planning by helping to predict periods of low galactic cosmic ray (GCR) penetration into the inner solar system.

Spacecraft↗
NASA NTRS2003

Navigating CONTOUR using the noncoherent transceiver technique

The objective of the CONTOUR mission was to conduct scientific fly-by studies of comets, Encke and Schwassmann-Wachmann 3, with the option of changing targets in-flight or visiting anadditional target after the SW3 encounter. The paper will describe the mission's planned trajectory, the navigation challenges, as well as the navigation tasks that were involved in achieving mission objectives.

orbit↗
NASA NTRSDate not supplied

Fault Detection and Performance Monitoring of Propellers in Electric UAV

Unmanned aerial vehicles (UAVs) are used in various industries such as agriculture and logistics, to name but a few, where their applications are beyond basic mapping, surveillance, and photography. In near future, UAVs are expected to be used in package delivery service and larger electric vertical takeoff and landing vehicles will be employed for urban air mobility applications (air taxi). Thus, several electric propulsion systems will enter the low-altitude airspace with frequent take offs and landings. To achieve state-of-the-art safety standards under such high traffic density, UAVs will require in-time fault detection and performance monitoring of critical powertrain components. This work focuses on propeller blade performance and damage detection in electric UAVs. Propellers are the fastest moving component in an UAV; even a minor defect in the propeller blades could cause performance deterioration, with consequent challenges in flying through the planned trajectory or adhere to the safety requirements of the operation. Monitoring and updating aerodynamic efficiency of each rotor would therefore enable the detection of off-nominal propeller conditions thus magnifying the state-awareness of powertrain monitoring systems based on the acquired electrical signals. We use an extended Kalman filter-based parameter estimation algorithm that incorporates time history responses from UAV powertrain in conjunction with a full powertrain system model. Propeller fault detection is achieved by incorporating the aerodynamic parameters of propeller into the powertrain model. The proposed technique is successfully validated with numerical simulations.

Unmanned aerial vehicles↗
NASA NTRS2021

Contact with Bennu! Flight Performance Versus Prediction of OSIRIS-REx TAG Sample Collection

The Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) mission collected a sample from the surface of the near-Earth asteroid (101955) Bennu in late 2020. Bennu challenged the team with a surface that was much rockier than expected, resulting in modifications to the prelaunch design of the Touch And Go (TAG) sequence. Following enhancements in onboard trajectory correction, ground-based navigation, and maneuver execution error modeling, the spacecraft was delivered to the chosen TAG site within 1 m of the target, and a sample was successfully collected on the first attempt. This paper provides a comprehensive description of all flight dynamics aspects of TAG trajectory planning and execution. It also describes hazard map generation and how that combined with error analysis results to predict the probability of safe contact before TAG and the onboard wave-off determination during TAG.

Kevin E Berry↗
NASA NTRSDate not supplied

Lidar-Based Safe Site Relative Navigation

Established Safe and Precise Landing–Integrated Capability Evolution (SPLICE) project precision landing requirements necessitate a navigation filter architecture and underlying models developed specifically with these needs in mind. To date, test flights to characterize SPLICE guidance and navigation (GN) system performance have not provided a means to divert from the a priori selected landing site (LS) due to hazardous conditions. With the inclusion of a new sensor type, the Hazard Detection Lidar (HDL) coupled with safe landing site selection algorithms, GN can divert from the originally planned trajectory and navigate relative to the new targeted landing site. This discussion covers the navigation filter developments necessary to perform this estimation and process the resulting HDL measurements to meet project safe landing goals.

Navigation↗
NASA NTRSDate not supplied

Candidate Performance Metrics for Generalized Control for Autonomous Flight

Contingency management is the most challenging aspect of autonomous flight. In order to accommodate the most flexible response to unpredicted events and unexpected circumstances, i.e. contingencies, a new integrated path planning, trajectory following, flight control architecture is required that would maximize the safe operating envelope. For this highly integrated generalized control architecture, a new set of performance metrics that extends beyond traditional stability and performance is required. This paper proposes a candidate set of new performance metrics relevant to urban air mobility mission scenarios.

Control metrics↗
NASA NTRSDate not supplied

Candidate Performance Metrics for Generalized Control for Autonomous Flight

Contingency management is the most challenging aspect of autonomous flight. In order to accommodate the most flexible response to unpredicted events and unexpected circumstances, i.e. contingencies, a new integrated path planning, trajectory following, flight control architecture is required that would maximize the safe operating envelope. For this highly integrated generalized control architecture, a new set of performance metrics that extends beyond traditional stability and performance is required. This paper proposes a candidate set of new performance metrics relevant to urban air mobility mission scenarios.

Control metrics↗
NASA NTRSDate not supplied

Lidar-Based Safe Site Relative Navigation

There has been a renewed focus in exploration of the lunar surface and maximizing scientific potential of such missions is made possible in part by minimizing the time required to set up operations; that is, reducing transit time on the surface by increasing the landing precision with respect to the intended target. Established SPLICE project precision landing requirements necessitate a navigation filter architecture and underlying models developed specifically with these needs in mind. To date, test flights to characterize SPLICE GNC system performance have not provided a means to divert from the a priori selected landing site due to hazardous conditions. With the inclusion of a new sensor, the HDL, coupled with safe landing site selection algorithms, GNC can divert from the originally planned trajectory and navigate relative to the new targeted landing site. This work presents a novel hazard relative measurement model and covariance transformation methodology that enable the navigation system to inform a safe-site relative guidance profile to meet project precision landing goals.

Navigation↗