Search NASA⌕ Search

SEARCH · Search NASA

Results for “transportation simulations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

The Bunny: A simulated commercial air transportation study

The Bunny is a single-engine, 100 passenger commercial transport designed to serve the high density short-to-medium range markets in AEROWORLD. The aircraft's design range is 10,000 feet at a cruise velocity of 30 ft/s. The aircraft features a low wing which incorporates polyhedral for roll control. Yaw and pitch control are accomplished by a rudder and elevator, respectively. Propulsion is provided by a nose-mounted Astro 15 electric motor powered by thirteen 1.2 V, 1000 mah batteries with a Zinger 12-6 propeller. The aircraft is structurally designed with a safety factor of 1.5 and is constructed primarily of balsa, bass, and birch wood. Passenger seating is arranged on two levels, with three-abreast on the lower level and two-abreast on the upper level. The factors which had the most significant influence on the final design were the direct operating cost and the take-off distance. The primary strength of The Bunny is its ability to compete economically with the HB-40. At full capacity and mid-range fuel costs, the cost per seat per thousand feet (CPSK) of this aircraft is 25% less than the HB-40. Another principal strength is its ability to operate in all airports in AEROWORLD. Also, The Bunny's two-piece removable wing is an advantage from a transportability standpoint.

Fulton, David↗
NASA NTRS1993

The Gold Rush: A simulated commercial air transportation study

The remotely piloted vehicle (RPV) GoldRush was designed to complete the mission of transporting passengers in AeroWorld at a lower cost per seat per thousand feet (CPSPK) than the competition, the HB-40. There were two major factors which were constant considerations in the design process. The cost of manufacturing was the most important. In light of this, the designs were kept as simple as possible while considering trade-offs in performance. For example, the wing was not tapered so that several ribs could be cut at one time. Also of major importance was the takeoff distance. In order to serve all the cities in AeroWorld it was necessary to maintain a takeoff distance requirement of 24 feet. The takeoff distance proved to be the number one force in driving the design process. The Astro 25 engine and 13 inch propellor, a large wing area, and the high lift Wortmann airfoil were all chosen in order to satisfy this objective.

Clarke, Amanda↗
NASA NTRS1993

The RTL-46: A simulated commercial air transportation study

The RTL-46 provides an aircraft which utilizes advanced technology within the fictional Aeroworld market to better service the air travel customers and airlines of Aeroworld. The RTL-46 is designed to serve the portion of the travel market which flies less than 10,000 feet per flight. The design cruise velocity for the aircraft is 35 ft/sec, which rapidly expedites travel through Aeroworld. The major focus of the endeavor was to design an aircraft which would serve the Aeroworld market better than the existing aircraft, the HB-40. This could have been done through targeting another portion of the Aeroworld market or through serving the current HB-40 market more effectively. Due to the fact that approximately 70 percent of the potential Aeroworld passengers desired flights of 10,000 ft or less, this range became the target market for the RTL-46.

Dunbar, Christian↗
NASA NTRS1999

Three Dimensional Model Simulation of Constituent Transport in the Lowermost Stratosphere

The composition, transport and photochemistry of the lowermost stratosphere, i.e., that part of the atmosphere which is above the tropopause, poleward of the tropics, and at potential temperature lower than the potential temperature of the tropical tropopause (about 380K) are of practical interest for understanding global ozone behavior. Because this region is a transition between transport regimes characterized by different scales of dynamics, it is especially difficult to model realistically. Through comparisons of observations of ozone, carbon dioxide and water vapor with results from a chemistry and transport model using winds from a global meteorological assimilation system, we have established that the model provides a good representation of several important aspects of constituent behavior. These include the constituent gradients near the tropopause as well as the annual cycle of constituents and the altitude dependence of the annual cycle from the tropopause into the middle stratosphere. This talk draws together these results to form a unified picture of transport into the lowermost extratropical stratosphere. In particular, the importance of convective transport to the distribution of both short-lived, and long-lived constituents in the lowermost stratosphere will be evaluated.

Douglass, Anne R.↗
NASA NTRS2001

Crystal Growth by Physical Vapor Transport: Experiments and Simulation Dynamics

Crystal growth from the vapor phase has various advantages over melt growth. The main advantage is from a lower processing temperature, which makes the process more amenable in instances where the melting temperature of the crystal is high. Other benefits stem from the inherent purification mechanism in the process due to differences in the vapor pressures of the native elements and impurities, and the enhanced interfacial morphological stability during the growth process. Further, the implementation of PVT growth in closed ampoules affords experimental simplicity with minimal needs for complex process control, which makes it an ideal candidate for space investigations in systems where gravity tends to have undesirable effects on the growth process. Bulk growth of wide band gap II-VI semiconductors by PVT has been developed and refined over the past several years at NASA MSFC. A new modeling approach for PVT has also been recently formulated and its validation and testing is the main objective of this work.

Ramachandran, N.↗
NASA NTRS2013

CFD Lagrangian Modeling of Water Droplet Transport for ISS Hygiene Activity Application

The goal of this study was to assess the impacts of free water propagation in the Waste and Hygiene Compartment (WHC) installed in Node 3. Free water can be generated inside the WHC in small quantities due to crew hygiene activity. To mitigate potential impact of free water in Node 3 cabin the WHC doorway is enclosed by a waterproof bump-out, Kabin, with openings at the top and bottom. At the overhead side of the rack, there is a screen that prevents large drops of water from exiting. However, as the avionics fan in the WHC causes airflow toward the deck side of the rack, small quantities of free water may exit at the bottom of the Kabin. A Computational Fluid Dynamics (CFD) analysis of Node 3 cabin airflow enable identifying the paths of water transport. To simulate the droplet transport the Lagrangian discrete phase approach was used. Various initial droplet distributions were considered in the study. The droplet diameter was varied in the range of 5-20 mm. The results of the computations showed that most of the drops fall to the rack surface not far from the WHC curtain.

Son, Chang H.↗
NASA NTRS2017

A First-Principles Model Based on Saturation of the Electron Cyclotron Drift Instability for Electron Transport in Hydrodynamics Simulations of Hall Thruster Plasmas

We present a computational model based on the hypothesis that the higher-than-expected electron mobility across magnetic field lines observed in Hall thrusters is due to the growth and eventual saturation of the electron cyclotron drift instability. The key improvement of this model with respect to previous work is that it decouples the saturation of the instability from the correlation that exists between mobility and magnitude of the wave perturbations in linear theory, thereby enabling first-principles simulations. The model has been incorporated in the 2-D (r-z) multi-fluids code Hall2De and simulations of the H6 thruster at 300 V, 20 A are numerically stable and achieve a steady-state solution at a computational cost that is not significantly higher than previous Hall2De simulations. The computed location of the acceleration region is found to be within 10% of the length of the acceleration channel compared to that inferred by experiments. The simulations also capture well the plasma gradients along the channel centerline of this thruster. To further establish the validity of this model, we plan to conduct simulations of other thrusters and/or operating conditions.

Lopez Ortega, Alejandro↗
NASA NTRS2017

Relating a Jet-Surface Interaction Experiment to a Commercial Supersonic Transport Aircraft Using Numerical Simulations

Reynolds-Averaged Navier-Stokes (RANS) simulations were performed for a commercial supersonic transport aircraft concept and experimental hardware models designed to represent the installed propulsion system of the conceptual aircraft in an upcoming test campaign. The purpose of the experiment is to determine the effects of jet-surface interactions from supersonic aircraft on airport community noise. RANS simulations of the commercial supersonic transport aircraft concept were performed to relate the representative experimental hardware to the actual aircraft. RANS screening simulations were performed on the proposed test hardware to verify that it would be free from potential rig noise and to predict the aerodynamic forces on the model hardware to assist with structural design. The simulations showed a large region of separated flow formed in a junction region of one of the experimental configurations. This was dissimilar with simulations of the aircraft and could invalidate the noise measurements. This configuration was modified and a subsequent RANS simulation showed that the size of the flow separation was greatly reduced. The aerodynamic forces found on the experimental models were found to be relatively small when compared to the expected loads from the model’s own weight.Reynolds-Averaged Navier-Stokes (RANS) simulations were completed for two configurations of a three-stream inverted velocity profile (IVP) nozzle and a baseline single-stream round nozzle (mixed-flow equivalent conditions). For the Sideline and Cutback flow conditions, while the IVP nozzles did not reduce the peak turbulent kinetic energy on the lower side of the jet plume, the IVP nozzles did significantly reduce the size of the region of peak turbulent kinetic energy when compared to the jet plume of the baseline nozzle cases. The IVP nozzle at Sideline conditions did suffer a region of separated flow from the inner stream nozzle splitter that did produce an intense, but small, region of turbulent kinetic energy in the vicinity of the nozzle exit. When viewed with the understanding that jet noise is directly related to turbulent kinetic energy, these IVP nozzle simulations show the potential to reduce noise to observers located below the nozzle. However, these RANS simulations also show that some modifications may be needed to prevent the small region of separated flow-induced turbulent kinetic energy from the inner stream nozzle splitter at Sideline conditions.

Reynolds-Averaged Navier Stokes↗
NASA NTRS1999

Influence of Transport on Two-Dimensional Model Simulation: 2. Stratospheric Aircraft Perturbations: Stratospheric Aircraft Perturbations - 2

We have adopted the transport scenarios used in Part 1 to examine the sensitivity of stratospheric aircraft perturbations to transport changes in our 2-D model. Changes to the strength of the residual circulation in the upper troposphere and stratosphere and changes to the lower stratospheric K(sub zz) had similar effects in that increasing the transport rates decreased the overall stratospheric residence time and reduced the magnitude of the negative perturbation response in total ozone. Increasing the stratospheric K(sub yy) increased the residence time and enhanced the global scale negative total ozone response. However, increasing K(sub yy) along with self-consistent increases in the corresponding planetary wave drive, which leads to a stronger residual circulation, more than compensates for the K(sub yy)-effect, and results in a significantly weaker perturbation response, relative to the base case, throughout the stratosphere. We found a relatively minor model perturbation response sensitivity to the magnitude of K(sub yy) in the tropical stratosphere, and only a very small sensitivity to the magnitude of the horizontal mixing across the tropopause and to the strength of the mesospheric gravity wave drag and diffusion. These transport simulations also revealed a generally strong correlation between passive NO(sub y) accumulation and age of air throughout the stratosphere, such that faster transport rates resulted in a younger mean age and a smaller NO(y) mass accumulation. However, specific variations in K(sub yy) and mesospheric gravity wave strength exhibited very little NO(sub y)-age correlation in the lower stratosphere, similar to 3-D model simulations performed in the recent NASA "Models and Measurements" II analysis. The base model transport, which gives the most favorable overall comparison with inert tracer observations, simulated a global/annual mean total ozone response of -0.59%, with only a slightly larger response in the northern compared to the southern hemisphere. For transport scenarios which gave tracer simulations within some agreement with measurements, the annual/globally averaged total ozone response ranged from -0.45% to -0.70%. Our previous 1995 model exhibited overly fast transport rates, resulting in a global/annually averaged perturbation total ozone response of -0.25%, which is significantly weaker compared to the 1999 model. This illustrates how transport deficiencies can bias model simulations of stratospheric aircraft.

Fleming, Eric L.↗
NASA NTRS1991

A method for determining transport delays in the flight simulation environment

This paper will describe the process of transport delay measurement along several points in the signal path for a piloted flight simulation. Several transport delay measurement techniques were compared to determine the accuracy and ease of use of each method. Measurements were made in both the frequency and time domain. The transport delays for individual pieces of equipment as well as the math model of the simulated vehicle are measured and broken out from the system's total transport delay.

Smith, R. M.↗
NASA NTRS1979

Numerical simulation of ozone production, transport and distribution with a global atmospheric general circulation model

The production, transport, and distribution of ozone are simulated for a January with a global atmospheric general circulation model. In this model, the ozone influences the radiational heating and the photochemical ozone production and destruction, the radiational heating influences the atmospheric circulation, and the circulation redistributes the ozone. The model has simulated the synoptic and time-averaged observed large-scale fields of temperature, mass, and velocity in the troposphere and stratosphere, although with deficiencies which are seen in the time-averaged O3 distribution. Transport of ozone in the summer and winter hemispheres, in different seasons, and in various latitudes is discussed, and it is concluded that the divergence of the ozone transport maintains it below its photochemical equilibrium concentration in the tropics and subtropics, and the convergence of the ozone transport maintains it above its photochemical equilibrium concentration in the middle and high latitudes of both hemispheres. Thus, both the atmospheric motions and the O3 photochemistry determine the O3 sources and sinks.

Schlesinger, M. E.↗
NASA NTRS1999

Influence of Transport on Two-Dimensional Model Simulation. Tracer Sensitivity to 2-D Model Transport: Long Lived Tracers - 1

In this study, we examine the sensitivity of long lived tracers to changes in the base transport components in our 2-D model. Changes to the strength of the residual circulation in the upper troposphere and stratosphere and changes to the lower stratospheric K(sub zz) had similar effects in that increasing the transport rates decreased the overall stratospheric mean age, and increased the rate of removal of material from the stratosphere. Increasing the stratospheric K(sub yy) increased the mean age due to the greater recycling of air parcels through the middle atmosphere, via the residual circulation, before returning to the troposphere. However, increasing K(sub yy) along with self-consistent increases in the corresponding planetary wave drive, which leads to a stronger residual circulation, more than compensates for the K(sub yy)-effect, and produces significantly younger ages throughout the stratosphere. Simulations with very small tropical stratospheric K(sub yy) decreased the globally averaged age of air by as much as 25% in the middle and upper stratosphere, and resulted in substantially weaker vertical age gradients above 20 km in the extratropics. We found only very small stratospheric tracer sensitivity to the magnitude of the horizontal mixing across the tropopause, and to the strength of the mesospheric gravity wave drag and diffusion used in the model. We also investigated the transport influence on chemically active tracers and found a strong age-tracer correlation, both in concentration and calculated lifetimes. The base model transport gives the most favorable overall comparison with a variety of inert tracer observations, and provides a significant improvement over our previous 1995 model transport. Moderate changes to the base transport were found to provide modest agreement with some of the measurements. Transport scenarios with residence times ranging from moderately shorter to slightly longer relative to the base case simulated N2O lifetimes that were within the observational estimates of Volk et al. [1997]. However, only scenarios with rather fast transport rates were comparable with the Volk et al. estimates of CFCl3 lifetimes. This is inconsistent with model-measurement comparisons of mean age in which the base model or slightly slower transport rates compared the most favorably with balloon SF6 data. For all comparisons shown, large transport changes away from the base case resulted in simulations that were outside the range of measurements, and in many cases, far outside this range.

Fleming, Eric L.↗