Search NASA⌕ Search

SEARCH · Search NASA

Results for “triple coupling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Determination of the structure and bond energies of NiO2 and CuO2

On the basis of extensive ab initio calculations, we estimate the metal-O2 binding energies of NiO2 and CuO2 to be 48 +/- 7 and 18 +/- 4 kcal/mol, respectively. We feel that the experimental estimate of 57 +/- 10 kcal/mol for the binding energy of NiO2 is slightly too large, while we are in complete agreement with the experimental estimate of 15 +10/-5 kcal/mol for CuO2. While the 1A1 ground state of NiO2 definitely has a side-on C(2v) structure, matrix isolation studies suggest that CuO2 has an end-on C(s) structure. Calculations at the coupled-cluster singles plus doubles level with a perturbational estimate of triple excitations, CCSD(T), produce a 2A2 state with C(2v) as a global minimum. However, the entire 2A-double prime ground-state surface is exceedingly flat, precluding a reliable determination of the gas-phase equilibrium structure.

Bauschlicher, Charles W., Jr.↗

Coupled-Cluster Theory Employing Approximate Integrals: An Approach to Avoid the Input/Output and Storage Bottlenecks

By representing orbital products in an expansion basis, certain classes of two-electron integrals are approximated for use in CCSD(T) calculations (singles and doubles coupled-cluster plus a perturbational estimate of the effects of connected triple excitations). This leads to a very large reduction in disk storage and input/output requirements, with usually only a modest increase in computational effort. The new procedure will allow very large CCSD(T) calculations to be undertaken, limited only by available processor time. Using the molecular basis as the expansion basis, explicit numerical comparisons of equilibrium geometries, harmonic frequencies, and energy differences indicate that the error due to the use of approximate integrals is less than the error associated with truncation of the molecular basis set.

Rendell, Alistair P.↗

The Vibrational Frequencies of CaO2, ScO2, and TiO2: A Comparison of Theoretical Methods

The vibrational frequencies of several states of CaO2, ScO2, and TiO2 are computed at using density functional theory (DFT), the Hatree-Fock approach, second order Moller-Plesset perturbation theory (MP2), and the complete-active-space self-consistent-field theory. Three different functionals are used in the DFT calculations, including two hybrid functionals. The coupled cluster singles and doubles approach including the effect of unlinked triples, determined using perturbation theory, is applied to selected states. The Becke-Perdew 86 functional appears to be the cost effective method of choice, although even this functional does not perform well for one state of CaO2. The MP2 approach is significantly inferior to the DFT approaches.

Rosi, Marzio↗

Trajectory Specification for High-Capacity Air Traffic Control

In the current air traffic management system, the fundamental limitation on airspace capacity is the cognitive ability of human air traffic controllers to maintain safe separation with high reliability. The doubling or tripling of airspace capacity that will be needed over the next couple of decades will require that tactical separation be at least partially automated. Standardized conflict-free four-dimensional trajectory assignment will be needed to accomplish that objective. A trajectory specification format based on the Extensible Markup Language is proposed for that purpose. This format can be used to downlink a trajectory request, which can then be checked on the ground for conflicts and approved or modified, if necessary, then uplinked as the assigned trajectory. The horizontal path is specified as a series of geodetic waypoints connected by great circles, and the great-circle segments are connected by turns of specified radius. Vertical profiles for climb and descent are specified as low-order polynomial functions of along-track position, which is itself specified as a function of time. Flight technical error tolerances in the along-track, cross-track, and vertical axes define a bounding space around the reference trajectory, and conformance will guarantee the required separation for a period of time known as the conflict time horizon. An important safety benefit of this regimen is that the traffic will be able to fly free of conflicts for at least several minutes even if all ground systems and the entire communication infrastructure fail. Periodic updates in the along-track axis will adjust for errors in the predicted along-track winds.

Paielli, Russell A.↗

Relativistic collapse of the classical triple bond in the CBi − molecular ion

The conventional framework for chemical bonding between main-group elements involves separate σ and π orbitals to describe multiple bonds. However, relativistic effects mix these orbitals in molecules containing heavy elements through spin–orbit coupling, leaving the total angular-momentum projection (ω) as the only good quantum number. Direct experimental evidence that relativistic effects change the σ-π bonding framework has remained elusive. Here, we probe the carbon-bismuth triple bond in the CBi − anion using high-resolution cryogenic photoelectron spectroscopy, coupled with relativistic four-component Dirac-Coulomb coupled-cluster calculations. Furthermore, even though the CBi − anion is isovalent to the well-known CN − species, we demonstrate that the traditional σ + 2π triple-bond picture collapses into a pure π-like |ω| = 3/2 and two |ω| = 1/2 Kramers pairs containing substantial σ/π mixing.

Kahraman, Deniz [Brown University, Providence, RI ↗

Triple and quadruple excitation contributions to the binding in Be clusters: Calibration calculations on Be3

The contribution of connected triple and quadruple excitations to the binding in Be3 is investigated by comparing various coupled-cluster (CC) and truncated configuration interaction (CI) treatments with multireference CI (MRCI) and full CI(FCI) calculations. The CC method with single and double excitations (CCSD) produces results that differ substantially from more elaborate treatments, but most extensions to CCSD that account approximately for connected triple excitations perform very well. In constrast, good agreement with FCI for Be2 can be achieved only with the highest level CC and MRCI methods.

Watts, John D.↗

Triple and quadruple excitation contributions to the binding in Be clusters - Calibration calculations on Be3

The contribution of connected triple and quadruple excitations to the binding in Be3 is investigated by comparing various coupled-cluster (CC) and truncated configuration-interaction (CI) treatments with multireference CI (MRCI) and full CI (FCI) calculations. The CC method with single and double excitations (CCSD) produces results that differ substantially from more elaborate treatments, but most extensions to CCSD that account approximately for connected triple excitations perform very well. In contrast, good agreement with CFI for Be2 can be achieved only with the highest level CC and MRCI methods.

Watts, John D.↗

Cr2 Revisited

Abstract Cr2 is studied at the coupled cluster singles and doubles level of theory, including a perturbational estimate of the connected triples [CCSD(T)]. Both spin restricted, RCCSD(T), and spin unrestricted, UCCSD(T), approaches are used. The UCCSD(T) bond length is much longer than the experimental value, while the RCCSD(T) bond length is shorter. This difference is due to the inability of the spin restricted Hartree-Fock reference to describe the antiferromagnetic coupling at larger r values. In contrast with the results obtained using density functional theory in conjunction with older functionals, the results obtained with recently developed functionals are in agreement with the UCCSD(T) results.

Bauschlicher, Charles W., Jr.↗

A Massively Parallel Implementation of the CCSD(T) Method Using the Resolution-of-the-Identity Approximation and a Hybrid Distributed/Shared Memory Parallelization Model

In this work, a parallel algorithm is described for the coupled-cluster singles and doubles method augmented with a perturbative correction for triple excitations [CCSD(T)] using the resolution-of-the-identity (RI) approximation for two-electron repulsion integrals (ERIs). The algorithm bypasses the storage of four-center ERIs by adopting an integral-direct strategy. The CCSD amplitude equations are given in a compact quasi-linear form by factorizing them in terms of amplitude-dressed three-center intermediates. A hybrid MPI/OpenMP parallelization scheme is employed, which uses the OpenMP-based shared memory model for intranode parallelization and the MPI-based distributed memory model for internode parallelization. Parallel efficiency has been optimized for all terms in the CCSD amplitude equations. Two different algorithms have been implemented for the rate-limiting terms in the CCSD amplitude equations that entail and -scaling computational costs, where N O and N V denote the number of correlated occupied and virtual orbitals, respectively. One of the algorithms assembles the four-center ERIs requiring N V 4 and N O 2 N V 2 -scaling memory costs in a distributed manner on a number of MPI ranks, while the other algorithm completely bypasses the assembling of quartic memory-scaling ERIs and thus largely reduces the memory demand. It is demonstrated that the former memory-expensive algorithm is faster on a few hundred cores, while the latter memory-economic algorithm shows a better strong scaling in the limit of a few thousand cores. The program is shown to exhibit a near-linear scaling, in particular for the compute-intensive triples correction step, on up to 8000 cores. The performance of the program is demonstrated via calculations involving molecules with 24–51 atoms and up to 1624 atomic basis functions. As the first application, the complete basis set (CBS) limit for the interaction energy of the π-stacked uracil dimer from the S66 data set has been investigated. This work reports the first calculation of the interaction energy at the CCSD(T)/aug-cc-pVQZ level without local orbital approximation. The CBS limit for the CCSD correlation contribution to the interaction energy was found to be -8.01 kcal/mol, which agrees very well with the value -7.99 kcal/mol reported by Schmitz, Hättig, and Tew [ Phys. Chem. Chem. Phys. 2014 , 16 , 22167-22178]. The CBS limit for the total interaction energy was estimated to be -9.64 kcal/mol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of a fault-tolerant microprocessor based computer system for space flight

A methodology for the design of a tightly coupled, highly reliable microprocessor based computer system is described. The concept of triple modular redundancy with sparing is used. The notion of synchronizing by using a single crystal oscillator is examined. The use of decoders to replace voters is also used. The decoders not only isolate the failed module but also allow error identification to be accomplished. Each module is to have its own RAM memory. The necessary circuitry to select a correct memory and the corresponding DMA controller was designed.

Montgomery, V. T.↗

Theoretical study of the alkaline-earth metal superoxides BeO2 through SrO2

Three competing bonding mechanisms have been identified for the alkaline-earth metal superoxides: these result in a change in the optimal structure and ground state as the alkaline-earth metal becomes heavier. For example, BeO2 has a linear 3Sigma(-)g ground-state structure, whereas both CaO2 and SrO2 have C(2v)1A1 structures. For MgO2, the theoretical calculations are less definitive, as the 3A2 C(2v) structure is computed to lie only about 3 kcal/mol above the 3Sigma(-)g linear structure. The bond dissociation energies for the alkaline-earth metal superoxides have been computed using extensive Gaussian basis sets and treating electron correlation at the modified coupled-pair functional or coupled-cluster singles and doubles level with a perturbational estimate of the triple excitations.

Bauschlicher, Charles W., Jr.↗

Ab initio characterization of ClOOH - Implications for atmospheric chemistry

The equilibrium structure, dipole moment, harmonic vibrational frequencies, and infrared intensities of ClOOH are determined using the CCSD(T) (singles and doubles coupled-cluster theory plus a perturbational estimate of the effects of connected triple excitations) electronic structure method in conjunction with a TZ2P (triple xi plus double polarization) basis set. The heat of formation of CIOOH is determined (using two different isodesmic reactions) to be +1.5 +/- 1 kcal/mol at 0 K or +0.2 +/- 1 kcal/mol at 298.15 K. Using the computed heat of formation, we examined the stability of ClOOH with respect to the ClO + OH, ClOO + H, and HOO + Cl dissociation limits. Since ClOOH is found to be quite stable, it is argued that the chemistry of ClOOH should be included in any accurate modeling of the stratosphere.

Lee, Timothy J.↗

Accurate Quartic Force Fields and Vibrational Frequencies for HCN and HNC

The quartic force fields of HCN and HNC are determined using atomic natural orbital one-particle basis sets of spdf/spd and spdfg/spdf quality in conjunction with the CCSD(T) electron correlation method (singles and doubles coupled-cluster theory plus a perturbational estimate of the effects of connected triple excitations). The HCN force field is in good agreement with a recent experimentally derived force field and also with the force field recently computed by Wong and Bacskay. On the basis of the good agreement obtained for HCN, it is argued that the ab initio quartic force field for HNC is superior to a prior force field derived from experiment. The harmonic frequencies of HNC are predicted to be 3822 +/- 10,472 +/- 5, and 2051 +/-10/cm for omega1, omega2, and omega3, respectively; the experimentally derived values are above these values and fall outside the estimated uncertainties. Using the quartic force field, spectroscopic constants are predicted for HNC based on a vibrational second-order perturbation theory analysis. It is also asserted that the gas-phase fundamental v(sub 3) for HNC is slightly lower than the matrix isolation value. The range of validity of the quartic force fields is investigated by comparison of variational vibrational energies computed with the quartic force fields to those obtained from our recently reported global HCN/HNC potential energy surface and also to experimental data.

Lee, Timothy J.↗

Accurate Quartic Force Fields and Vibrational Frequencies for HCN and HNC

The quartic force fields of HCN and HNC are determined using atomic natural orbital one-particle basis sets of spdf/spd and spdfg/spdf quality in conjunction with the CCSD(T) electron correlation method (singles and doubles coupled-cluster theory plus a perturbation estimate of the effects of connected triple excitations). The HCN force field is in good agreement with a recent experimentally derived force field and also with the force field recently computed by Wong and Bacskay. On the basis of the good agreement obtained for HCN, it is argued that the ab initio quartic force field for HNC is superior to a prior force field derived from experiment. The harmonic frequencies of HNC are predicted to be 3822 +/- 10, 472 +/- 5, and 2051 +/- 10 cm(exp -1) for omega(sub 1), omega(sub 2), and omega(sub 3), respectively; the experimentally derived values are above these values and fall outside the estimated uncertainties. Using the quartic force field, spectroscopic constants are predicted for HNC based on a vibrational second-order perturbation theory analysis. It is also asserted that the gas-phase fundamental nu(sub 3) for HNC is slightly lower than the matrix isolation value. The range of validity of the quartic force fields is investigated by comparison of variational vibrational energies computed with the quartic force fields to those obtained from our recently reported global HCN/HNC potential energy surface and also to experimental data.

Lee, Timothy J.↗

Application of Coupled-Cluster Methods to the Prediction and Interpretation of the Spectra of Molecules of Interest in Atmospheric Chemistry

The quality of fundamental vibrational frequencies determined using the CCSD(T) method (singles and doubles coupled-cluster theory plus a perturbational estimate of the effects of connected triple excitations) is shown to be very good, usually predicting band centers to within +/-8/cm. This approach is applied to several molecules of interest in atmospheric chemistry, including HNO, NO2(+), H2CO, and HOCl. The HNO molecule displays a large and unusual anharmonicity in the H-N stretch. For the calculation of ultraviolet (UV) spectra, the linear response CCSD (LRCCSD) approach (which is equivalent to EOM-CCSD) has been shown to yield vertical excitation energies that are accurate to approximately 0.1 eV for singly excited electronic states. This method together with more approximate methods is used to examine the UV spectra of several molecules important in stratospheric chemistry, including HOCl, Cl2O, ClOOCl, ClOOH, and HOOH.

Lee, Timothy J.↗

The G2(B3LYP/MP2/CC) Approach: A Modification of the G2(MP2) Approach and a Comparison with B3LYP Results

The quadratic configuration interaction calculation in the G2(MP2) approach is replaced by a coupled-cluster singles and doubles calculation including a perturbational estimate of the triples excitations. In addition, the SCF and MP2 geometry optimizations and SCF frequency calculation in the G2(MP2) approach are replaced by a B3LYP geometry optimization and frequency calculation in the proposed G2(B3LYP/MP2/CC) approach. This simplification does not affect the average absolute deviation from experiment, but decreases the maximum error compared with the G2(MP2) approach. The G2(B3LYP/MP2/CC) results are compared with those obtained using the B3LYP approach, and the G2(B3LYP/MP2/CC) model is found to be more reliable, even if the B3LYP calculations are performed using a large basis set.

Bauschlicher, Charles W., Jr.↗

Ab Initio Studies of Fluorine and Chlorine Oxide and Nitrogen Oxide Species of Interest in Stratospheric Chemistry

The quality of fundamental vibrational frequencies determined using the CCSD(T) method (singles and doubles coupled-cluster theory plus a perturbational estimate of the effects of connected triple excitations) is shown to be very good, usually predicting band centers to within plus or minus 8 per centimeter. This approach is applied to several molecules of interest in atmospheric chemistry, such as HNO, cis-FONO, cis-ClONO, and ClOOH. The HNO molecule displays a large and unusual anharmonicity in the H-N stretch. For the calculation of ultraviolet (UV) spectra, the linear response CCSD (LRCCSD) approach (which is equivalent to EOM-CCSD) has been shown to yield vertical excitation energies that are accurate to approximately equal to 0.1 eV for singly excited electronic states. This method together with more approximate methods is used to examine the UV spectra of several molecules important in stratospheric chemistry, including HOCl, Cl2O, ClONO2, HONO2, ClOOCl, ClOOH, and HOOH.

Lee, Timothy J.↗

Using Density Functional Theory (DFT) for the Calculation of Atomization Energies

The calculation of atomization energies using density functional theory (DFT), using the B3LYP hybrid functional, is reported. The sensitivity of the atomization energy to basis set is studied and compared with the coupled cluster singles and doubles approach with a perturbational estimate of the triples (CCSD(T)). Merging the B3LYP results with the G2(MP2) approach is also considered. It is found that replacing the geometry optimization and calculation of the zero-point energy by the analogous quantities computed using the B3LYP approach reduces the maximum error in the G2(MP2) approach. In addition to the 55 G2 atomization energies, some results for transition metal containing systems will also be presented.

Bauschlicher, Charles W., Jr.↗