Search NASA⌕ Search

SEARCH · Search NASA

Results for “turnover frequency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Development of an autothermal formate-based hydrogen generator: From optimization of formate dehydrogenation conditions to thermal integration with Fuel Cells

Formate received significant attention for storing H2 in chemical bonds using the concept of H2 carriers. In this report, hydrogen generation from formate was optimized systematically by varying reaction variables. Initial mass activity with a turnover frequency of 3200 molH2 molPd–1 h–1 and 92% H2 yield were obtained in sodium formate (7 M 2.0 mL) dehydrogenation over Pd(3 wt %)/C at 80 °C. Influence of formate cations (Na, K, and NH4) on dehydrogenation was also elucidated, presenting that the fastest initial reaction kinetics was achieved with ammonium formate, whereas the highest H2 yield was obtained with potassium formate (PF) in multiple catalyst recycle tests. Finally, an on-site power generation system was integrated, where a proton exchange membrane fuel cell (PEMFC) was operated in conjunction with H2 produced from the custom developed semibatch dehydrogenation reactors. The system operation was demonstrated with continuous feeding of PF to generate H2 and power on demand without an external heat source by utilizing waste heat produced from the PEMFC in a highly efficient manner.

formate dehydrogenation, optimization of reaction ↗
DOE OSTI2024

Mechanocatalytic Hydrogenolysis of the Lignin Model Dimer Benzyl Phenyl Ether over Supported Palladium Catalysts

This work demonstrates the mechanocatalytic hydrogenolysis of the ether bond in the lignin model compound benzyl phenyl ether (BPE) and hardwood lignin isolated by hydrolysis with supercritical water. Pd catalysts with 4 wt % loading on Al 2 O 3 and SiO 2 supports achieve 100% conversion of BPE with a toluene production rate of (2.6–2.9) × 10 –5 mol·min –1 . The formation of palladium hydrides under H 2 gas flow contributes to an increase in the turnover frequency by a factor of up to 300 compared to Ni on silica–alumina. While a near-quantitative toluene yield is obtained, some of the phenolic products remain adsorbed on the catalyst.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Insights into the Mechanism of n-Hexane Reforming over a Single-Site Platinum Catalyst

We demonstrate that the single-site catalyst Pt 1 /CeO 2 greatly enhances the selectivity of cyclization and aromatization in the n -hexane reforming reaction. Specifically, the selectivity of single-site Pt 1 /CeO 2 toward both cyclization and aromatization is above 86% at 350 °C. The turnover frequency of Pt 1 /CeO 2 is 58.8 h -1 at 400 °C, which is close to that of Pt cluster/CeO 2 (61.4 h -1 ) and much higher than that of Pt nanoparticle/CeO 2 with Pt sizes of 2.5 and 7 nm. On the basis of the catalytic results for methylcyclopentane reforming, the dehydrocyclization and further aromatization of n -hexane are attributed to the prominent adsorption of ring intermediate products on the single-site Pt 1 /CeO 2 catalysts. On the other side, with the multiple Pt adjacent active sites, the cluster and nanoparticle Pt/CeO 2 samples favor the C-C bond cracking reaction. Ultimately, this in-depth study unravels the principles of hydrocarbon activation with different Pt sizes and represents a key step toward the rational design of new heterogeneous catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Engineering Second Sphere Interactions in a Host–Guest Multicomponent Catalyst System for the Hydrogenation of Carbon Dioxide to Methanol

Many enzymes utilize interactions extending beyond the primary coordination sphere to enhance catalyst activity and/or selectivity. Such interactions could improve the efficacy of synthetic catalyst systems, but the supramolecular assemblies employed by biology to incorporate second sphere interactions are challenging to replicate in synthetic catalysts. Herein, a strategy is reported for efficiently manipulating outer sphere influence on catalyst reactivity by modulating host–guest interactions between a noncovalently encapsulated transitionmetal-based catalyst guest and a metal–organic framework (MOF) host. This composite consists of a ruthenium PNP pincer complex encapsulated in the MOF UiO-66 that is used in tandem with the zirconium oxide nodes of UiO-66 and a ruthenium PNN pincer complex to hydrogenate carbon dioxide to methanol. Due to the method used to incorporate the complexes in UiO-66, structure–activity relationships could be efficiently determined using a variety of functionalized UiO-66-X hosts. These investigations uncovered the beneficial effects of the ammonium functional group (i.e., UiO-66-NH 3 + ). Mechanistic experiments revealed that the ammonium functionality improved efficiency in the hydrogenation of carbon dioxide to formic acid, the first step in the cascade. Isotope effects and structure–activity relationships suggested that the primary role of the ammonium functionality is to serve as a general Brønsted acid. Importantly, the cooperative influence from the host was effective only with the functional group in close proximity to the encapsulated catalyst. Here, reactions carried out in the presence of molecular sieves to remove water highlighted the beneficial effects of the ammonium functional group in UiO-66-NH 3 + and resulted in a 4-fold increase in activity. As a result of the modular nature of the catalyst system, the highest reported turnover number (TON) (19 000) and turnover frequency (TOF) (9100 h –1 ) for the hydrogenation of carbon dioxide to methanol are obtained. Moreover, the reaction was readily recyclable, leading to a cumulative TON of 100 000 after 10 reaction cycles.

08 HYDROGEN↗
DOE OSTI2020

Unexpected “Spontaneous” Evolution of Catalytic, MOF-Supported Single Cu(II) Cations to Catalytic, MOF-Supported Cu(0) Nanoparticles

A desirable feature of metal–organic frameworks (MOFs) is their well-defined structural periodicity and the presence of well-defined catalyst grafting sites (e.g., reactive –OH and –OH 2 groups) that can support single-site heterogeneous catalysts. However, one should not overlook the potential role of residual organic moieties, specifically formate ions that can occupy the catalyst anchoring sites during MOF synthesis. Here we show how these residual formate species in a Zr-based MOF, NU-1000, critically alter the structure, redox capability, and catalytic activity of postsynthetically incorporated Cu(II) ions. Single-crystal X-ray diffraction measurements established that there are two structurally distinct types of Cu(II) ions in NU-1000: one type with residual formate and one without. In NU-1000 with formate, Cu(II) solely binds to the node via the formate-unoccupied, bridging μ 3 –OH, whereas in the formate-free case, it displaces protons from two node hydroxo ligands and resides close to the terminal –OH 2 . Under an inert atmosphere, node-bound formate facilitates the unanticipated reduction of isolated Cu(II) to nanoparticulate Cu(0)—a behavior which is essentially absent in the formate-free analogue because no other sacrificial reductant is present. When the two MOFs were tested as benzyl alcohol oxidation catalysts, we observed that residual formate boosts the catalytic turnover frequency. Density functional calculations showed that node-bound formate acts as a sacrificial two-electron donor and assists in reducing Cu(II) to Cu(0) by a nonradical pathway. The negative Gibbs free energy of reaction (ΔG) and enthalpy of reaction (ΔH) indicate that the reduction is thermodynamically favorable. Here, the work presented here highlights how the often-neglected residual formate prevalent in nearly all zirconium-based MOFs can significantly modulate the properties of supported catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Metal–Ligand Cooperativity via Exchange Coupling Promotes Iron- Catalyzed Electrochemical CO 2 Reduction at Low Overpotentials

Biological and heterogeneous catalysts for the electrochemical CO 2 reduction reaction (CO 2 RR) often exhibit a high degree of electronic delocalization that serves to minimize overpotential and maximize selectivity over the hydrogen evolution reaction (HER). Here, we report a molecular iron(II) system that captures this design concept in a homogeneous setting through the use of a redox non-innocent terpyridine-based pentapyridine ligand (tpyPY2Me). As a result of strong metal-ligand exchange coupling between the Fe(II) center and ligand, [Fe(tpyPY2Me)] 2+ exhibits redox behavior at potentials 640 mV more positive than the isostructural [Zn(tpyPY2Me)] 2+ analog containing the redox-inactive Zn(II) ion. This shift in redox potential is attributed to the requirement for both an open-shell metal ion and a redox non-innocent ligand. The metal-ligand cooperativity in [Fe(tpyPY2Me)] 2+ drives the electrochemical reduction of CO 2 to CO at low overpotentials with high selectivity for CO 2 RR (>90%) and turnover frequencies of 100,000 s -1 with no degradation over 20 h. The decrease in the thermodynamic barrier engendered by this coupling also enables homogeneous CO 2 reduction catalysis in water without compromising selectivity or rates. Synthesis of the two-electron reduction product, [Fe(tpyPY2Me)] o , and characterization by X-ray crystallography, Mössbauer spectroscopy, X-ray absorption spectroscopy (XAS), variable temperature NMR, and density functional theory (DFT) calculations, support assignment of an open-shell singlet electronic structure that maintains a formal Fe(II) oxidation state with a doubly reduced ligand system. Furthermore, this work provides a starting point for the design of systems that exploit metal-ligand cooperativity for electrocatalysis where the electrochemical potential of redox non-innocent ligands can be tuned through secondary metal-dependent interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A Tunable Multivariate Metal–Organic Framework as a Platform for Designing Photocatalysts

Catalysts for photochemical reactions underlie many foundations in our lives, from natural light harvesting to modern energy storage and conversion, including processes such as water photolysis by TiO 2 . Recently, metal–organic frameworks (MOFs) have attracted large interest within the chemical research community, as their structural variety and tunability yield advantages in designing photocatalysts to address energy and environmental challenges. Here, we report a series of novel multivariate metal–organic frameworks (MTV-MOFs), denoted as MTV-MIL-100. They are constructed by linking aromatic carboxylates and AB 2 OX 3 bimetallic clusters, which have ordered atomic arrangements. Synthesized through a solvent-assisted approach, these ordered and multivariate metal clusters offer an opportunity to enhance and fine-tune the electronic structures of the crystalline materials. Moreover, mass transport is improved by taking advantage of the high porosity of the MOF structure. Combining these key advantages, MTV-MIL-100(Ti,Co) exhibits a high photoactivity with a turnover frequency of 113.7 mol H2 gcat. –1 min –1 , a quantum efficiency of 4.25%, and a space time yield of 4.96 × 10 –5 in the photocatalytic hydrolysis of ammonia borane. Bridging the fields of perovskites and MOFs, this work provides a novel platform for the design of highly active photocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Atomically Dispersed Copper Sites in a Metal–Organic Framework for Reduction of Nitrogen Dioxide

Metal-organic framework (MOF) materials provide an excellent platform to fabricate single-atom catalysts due to their structural diversity, intrinsic porosity, and designable functionality. However, the unambiguous identification of atomically dispersed metal sites and the elucidation of their role in catalysis are challenging due to limited methods of characterization and lack of direct structural information. Here, we report a comprehensive investigation of the structure and the role of atomically dispersed copper sites in UiO-66 for the catalytic reduction of NO 2 at ambient temperature. The atomic dispersion of copper sites on UiO-66 is confirmed by high-angle annular dark-field scanning transmission electron microscopy, electron paramagnetic resonance spectroscopy, and inelastic neutron scattering, and their location is identified by neutron powder diffraction and solid-state nuclear magnetic resonance spectroscopy. The Cu/UiO-66 catalyst exhibits superior catalytic performance for the reduction of NO 2 at 25 °C without the use of reductants. A selectivity of 88% for the formation of N2 at a 97% conversion of NO 2 with a lifetime of >50 h and an unprecedented turnover frequency of 6.1 h-1 is achieved under nonthermal plasma activation. In situ and operando infrared, solid-state NMR, and EPR spectroscopy reveal the critical role of copper sites in the adsorption and activation of NO 2 molecules, with the formation of {Cu(I)···NO} and {Cu···NO 2 } adducts promoting the conversion of NO 2 to N 2 . This study will inspire the further design and study of new efficient single-atom catalysts for NO 2 abatement via detailed unravelling of their role in catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Oriented Electrostatic Effects on O 2 and CO 2 Reduction by a Polycationic Iron Porphyrin

Next-generation energy technologies require improved methods for rapid and efficient chemical-to-electrical energy transformations. One new approach has been to include atomically-positioned, electrostatic motifs in molecular catalysts to stabilize high-energy, charged intermediates. For example, an iron porphyrin bearing four cationic, ortho-N,N,N-trimethylanilinium groups (o-[N(CH 3 ) 3 ] + ) has recently been used to catalyze the complex, multi-step O 2 and CO 2 reduction reactions (ORR and CO 2 RR) with fast rates and at low overpotentials. The success of this catalyst is attributed, at least in part, to specific charge-charge interactions between the atomically-positioned o-[N(CH 3 ) 3 ] + groups and the bound substrate. However, by nature of the mono-ortho substitution pattern, there are four possible atropisomers of this metalloporphyrin and thus four unique electrostatic environments. This work reports that each of the four individual atropisomers catalyzes both the ORR and CO 2 RR with fast rates and low overpotentials. The maximum turnover frequencies (TOF max ) vary among the atropisomers, by a factor of 60 for the ORR and a factor of 5 for CO 2 RR. For the ORR, the αβαβ isomer is the fastest and has the highest overpotential, while for the CO 2 RR, the order is reversed and the αααα isomer is the fastest and has the highest overpotential. The role of charge-positioning is complex and can affect more than a single step such as CO 2 binding. These data offer a first-of-a-kind perspective on atomically positioned charge and highlight the significance of high charge density, rather than orientation, on the thermodynamics and kinetics of multistep molecular electrochemical transformations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Colloidal Platinum–Copper Nanocrystal Alloy Catalysts Surpass Platinum in Low-Temperature Propene Combustion

Low-temperature removal of noxious environmental emissions plays a critical role in minimizing the harmful effects of hydrocarbon fuels. Emission-control catalysts typically consist of large quantities of rare, noble metals (e.g., platinum and palladium), which are expensive and environmentally damaging metals to extract. Alloying with cheaper base metals offers the potential to boost catalytic activity while optimizing the use of noble metals. In this work, we show that Pt x Cu 100–x catalysts prepared from colloidal nanocrystals are more active than the corresponding Pt catalysts for complete propene oxidation. By carefully controlling their composition while maintaining nanocrystal size, alloys with dilute Cu concentrations (15–30% atomic fraction) demonstrate promoted activity compared to pure Pt. Complete propene oxidation was observed at temperatures as low as 150 °C in the presence of steam, and five to ten times higher turnover frequencies were found compared to monometallic Pt catalysts. Additionally, through DFT studies and structural and catalytic characterization, the remarkable activity of dilute Pt x Cu 100–x alloys was related to the tuning of the electronic structure of Pt to reach optimal binding energies of C* and O* intermediates. This work provides a general approach toward investigation of structure–property relationships of alloyed catalysts with efficient and optimized use of noble metals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Pt Atomic Single-Layer Catalyst Embedded in Defect-Enriched Ceria for Efficient CO Oxidation

The local coordination structure of metal sites essentially determines the performance of supported metal catalysts. Here, using a surface defect enrichment strategy, we successfully fabricated Pt atomic single-layer (Pt ASL ) structures with 100% metal dispersion and precisely controlled local coordination environment (embedded vs adsorbed) derived from Pt single-atoms (Pt 1 ) on ceria-alumina supports. The local coordination environment of Pt 1 not only governs its catalytic activity but also determines the Pt 1 structure evolution upon reduction activation. For CO oxidation, the highest turnover frequency can be achieved on the embedded Pt ASL in the CeO 2 lattice, which is 3.5 times of that on the adsorbed Pt ASL on the CeO 2 surface and 10–70 times of that on Pt1. The favorable CO adsorption on embedded Pt ASL and improved activation/reactivity of lattice oxygen within CeO 2 effectively facilitate the CO oxidation. This work provides new insights for the precise control of the local coordination structure of active metal sites for achieving 100% atomic utilization efficiency and optimal intrinsic catalytic activity for targeted reactions simultaneously.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Toward Carbon Monoxide Methanation at Mild Conditions on Dual-Site Catalysts

The catalytic carbon monoxide (CO) methanation is an ideal model reaction for the fundamental understanding of catalysis on the gas–solid interface and is crucial for various industrial processes. However, the harsh operating conditions make the reaction unsustainable, and the limitations set by the scaling relations between the dissociation energy barrier and dissociative binding energy of CO further increase the difficulty in designing high-performance methanation catalysts operating under milder conditions. In this work, we proposed a theoretical strategy to circumvent the limitations elegantly and achieve both facile CO dissociation and C/O hydrogenation on the catalyst containing a confined dual site. The DFT-based microkinetic modeling (MKM) reveals that the designed Co-Cr 2 /G dual-site catalyst could provide 4–6 orders of magnitude higher turnover frequency for CH 4 production than the cobalt step sites. We believe that the proposed strategy in the current work will provide essential guidance for designing state-of-the-art methanation catalysts under mild conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Cooperative Atomically Dispersed Fe–N 4 and Sn–N x Moieties for Durable and More Active Oxygen Electroreduction in Fuel Cells

One grand challenge for deploying porous carbons with embedded metal–nitrogen–carbon (M–N–C) moieties as platinum group metal (PGM)-free electrocatalysts in proton-exchange membrane fuel cells is their fast degradation and inferior activity. Here, we report the modulation of the local environment at Fe–N 4 sites via the application of atomic Sn–N x sites for simultaneously improved durability and activity. We discovered that Sn–N x sites not only promote the formation of the more stable D2 FeN 4 C 10 sites but also invoke a unique D3 SnN x –Fe II N 4 site that is characterized by having atomically dispersed bridged Sn–N x and Fe–N 4 . This new D3 site exhibits significantly improved stability against demetalation and several times higher turnover frequency for the oxygen reduction reaction (ORR) due to the shift of the reaction pathway from a single-site associative mechanism to a dual-site dissociative mechanism with the adjacent Sn site facilitating a lower overpotential cleavage of the O–O bond. This mechanism bypasses the formation of the otherwise inevitable intermediate that is responsible for demetalation, where two hydroxyl intermediates bind to one Fe site. Lastly, a mesoporous Fe/Sn-PNC catalyst exhibits a positively shifted ORR half-wave potential and more than 50% lower peroxide formation. This, in combination with the stable D3 site and enriched D2 Fe sites, significantly enhanced the catalyst’s durability as demonstrated in membrane electrode assemblies using complementary accelerated durability testing protocols.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Sustained, Selective, and Efficient Photochemical CO 2 Reduction to Formate by Electron-Deficient Ruthenium Polypyridyl Complexes

Metal-hydrides play a significant role in a variety of reactions, including chemical, electrochemical, and pho-tochemical CO 2 reduction. Molecular metal-hydrides have the distinct advantage of allowing tunability of their hydricities by rational ligand modifications, with more electron-rich metal-hydrides being in general more hydridic. We report here a new approach to generate highly hydridic metal hydrides of the type [Ru(tpy)(LL)(H)] n+ by introducing electron-withdrawing substituents in the backbone of the bidentate LL ligand. This strategy enables the generation of the metal hydride, [Ru(tpy)(LL)(H)] + , at mild negative potentials and further one electron reduction to the more hydridic [Ru(tpy)(LL)(H)] 0 at a potential window that is redox silent for the more electron-rich metal hydride analogue [Ru(tpy)(bpy)(H)] + . In addition, for-mate release takes place from the hydride transfer adducts [Ru---HCOO)(tpy)(LL)] 0 rather than from the corresponding formato complexes, [Ru(tpy)(LL)(OCHO)] 0 , which would require further reduction to [Ru(tpy)(LL)(OCHO)]ˉ as demonstrated by IR-spectroelectrochemistry. The parent [Ru(tpy)(LL)(CH 3 CN)] n+ solvento complexes were then tested as catalysts for the reduction of CO 2 to formate in a 4-component homogenenous photochemical approach driven by a Ru(II) sensitizer. The re-sults showed selective (> 88%) formate production with record turnover number of ~50,000 and record turnover frequency of 4.4 s -1 when compared to other molecular catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Electrocatalytic Ammonia Oxidation by Pyridyl-Substituted Ferrocenes

Ammonia (NH 3 ) is a promising carbon-free fuel when prepared from sustainable resources. First-row transition metal electrocatalysts for ammonia oxidation are an enabling technology for sustainable energy production. We describe electrocatalytic ammonia oxidation using robust molecular complexes based on Earth-abundant iron. Electrochemical studies of ferrocenes with covalently attached pyridine arms reveal facile ammonia oxidation in DMSO (2.4 M NH 3 ) with modest overpotentials (η = 770–820 mV) and turnover frequencies (125–560 h –1 ). Experimental and computational studies indicate that the pendant pyridyl base serves as an H-bond acceptor with an N–H bond of ammonia that transfers a proton to the pyridine following oxidation by the attached ferrocenium moiety in a proton-coupled electron transfer (PCET) step. This generates an amidyl (•NH 2 ) radical stabilized via H-bonding to a pendant pyridinium moiety that rapidly dimerizes to hydrazine (H 2 N–NH 2 ), which is easily oxidized to nitrogen (N 2 ) at the glassy carbon working electrode. This report identifies a general strategy to oxidize ammonia via H-bonding to a base (B:), thereby activating [B···H-NH 2 ] toward PCET by a proximal oxidant to form [BH···NH 2 ] +/• radical cations, which are susceptible to dimerization to form easily oxidized hydrazine.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Stable Metal–Organic Electrocatalysts for Anion-Exchange Membrane Water Electrolyzers by Defect Engineering

Developing efficient and durable catalysts for the alkaline oxygen evolution reaction (OER) is vital to achieving practical anion-exchange membrane water electrolyzers (AEMWE) for green hydrogen production. In this work, we break the activity-stability trade-off of electrocatalysis by defect engineering of Ni-based metal-organic electrocatalysts (Ni-benzene dicarboxylate; Ni-BDC) through coordinating ferrocenecarboxylates (Fc) to the metal sites. Experimental results collectively reveal that the defect MOF (Ni-BDC:Fc_5:1) exhibits a high OER turnover frequency of 0.75 O 2 s -1 at 300 mV overpotential. Operando Raman spectroscopy and isotope-labelling electrochemical mass spectrometry measurements indicate the structure of Ni-BDC:Fc_5:1 is also more stable in service than that of pure Ni-BDC. The high activity and stability could be attributed to the moderate defects (i.e., unsaturated Ni sites) in the structure that not only increase the intrinsic activity and stability of the local active environment by inhibiting lattice oxygen exchange, but also electrochemically activates the bulk of the catalysts by creating a porous network that facilitates internal H 2 O/OH - conduction with enhanced electronic conduction. Accordingly, an AEMWE employing Ni-BDC:Fc_5:1 as the OER catalyst delivers an industrial-level current density of 1 A cm -2 at 1.73 V cell and can be steadily operated for more than 120 hours.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Concerted Proton–Electron Transfer Minimizes Substituent Effects on Adsorbed Phthalocyanine Electrocatalysis

Molecularly modified electrodes (MMEs) are potent electrocatalysts, but few principles exist for their rational design. Electrocatalysis by soluble molecules depends strongly on substituents that tune the catalyst redox potential (E 1/2 ), but it is unclear if this parameter similarly impacts MME catalysis. Herein, we employ the hydrogen evolution reaction (HER) as a test case for comparing carbon-adsorbed cobalt phthalocyanine (CoPc/C) and cobalt hexadecafluoro-phthalocyanine (CoFPc/C). By correlating HER activity and voltammetric data to total Co surface concentration across a wide range of catalyst loadings, we find that only 5–25% of adsorbed Co sites contribute to the Co(II/I) redox wave and that this subpopulation poorly correlates with catalytic activity. Instead, in the low-loading limit, catalytic activity correlates linearly with the majority Co(II/I)-silent Co population, revealing per-site turnover frequency (TOF) values for HER. Despite a 230 mV difference in Co(II/I) redox potentials, CoPc/C and CoFPc/C display TOF values differing by less than a factor of 3 when compared over a wide potential range. Mechanistic studies point to an inner-sphere concerted proton–electron transfer step as rate-determining, suggesting that the Co–H bond dissociation free energy (BDFE) rather than the Co(II/I) E 1/2 is thermodynamically relevant. Computational studies indicate that the fluoro-substituents lead to compensatory changes in Co(II/I) E 1/2 and Co(I) basicity, leaving the Co–H BDFE largely unchanged between CoPc and CoFPc and thereby manifesting in similar catalytic rates. Furthermore, these results highlight the limited effect of E 1/2 -tuning on MME catalytic activity and motivate the development of methods to directly alter active site–substrate BDFE.

Catalysts↗
DOE OSTI2026

A Mesopore-Confined and Graphene Oxide-Localized Ruthenium Catalyst Increases Rates of Mid-Chain Polyolefin Hydrogenolysis

A catalyst architecture with mesoporous silica coating Ru nanoparticles on reduced graphene oxide (mSiO 2 /Ru/rGO) localizes the 2 nm Ru solely at the closed bottoms of 2.9 nm diameter mesopores. mSiO 2 /Ru/rGO catalyzes the rapid, selective hydrogenolysis of polyolefins at wax formation rates (ν wax ) up to 1700 g wax ·g Ru –1 ·h –1 and a turnover frequency (TOF) for C–C bond cleavage of 130 ± 8 min –1 . The ν wax and TOF for mSiO 2 /Ru/rGO are 23× and 16× those of nonporous Ru/rGO, respectively, indicating that faster chain cleavage is also more selective inside mesopores. The methane yield from mSiO 2 /Ru/rGO is ca. 30% of the value obtained from Ru/rGO. Methane decreases, and wax selectivity improves with narrow-pore (2.3 nm) mSiO 2 /Ru/rGO. The reaction rate decreases at lower and higher H 2 pressures from its maximum at 37 bar. Log(TOF)-log(P H2 ) plots reveal rates ∝ [P H2 ] 2.8 or [P H2 ] −2.0 in the lower or higher pressure ranges, respectively. Corresponding plots for Ru/C give rates ∝ [P H2 ] 1 or [P H2 ] −2.4 . Ru is hydrocarbon-covered at low pressure; thus, the higher H 2 order for mSiO 2 /Ru/rGO indicates that mesopores increase the density of cleavable unsaturated moieties on the Ru surface. The lower H 2 order on Ru/C implies a lower density of cleavable groups because saturated segments occupy a larger fraction of the Ru surface. Higher surface occupancy by the hydrocarbon reactant correlates with more methane formation. Therefore, pore confinement, narrower pore diameter in mSiO 2 /Ru/rGO, or higher H 2 pressure leads to lower methane yields. Ru nanoparticles in mSiO 2 /Ru/rGO maintain equivalent activity and selectivity over five recycling tests.

Catalysts↗