Search NASA⌕ Search

SEARCH · Search NASA

Results for “vertical stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

Model Validation of Wake-Vortex/Aircraft Encounters

Wake-vortex effects on an 10% scale model of the B737-100 aircraft are calculated using both strip theory and vortex-lattice methods. The results are then compared to data taken in the 30ft x 60ft wind tunnel at NASA Langley Research Center (LaRC). The accuracy of the models for a reduced geometry, such with the horizontal stabilizer and the vertical tail removed, is also investigated. Using a 10% error in the circulation strength and comparing the model's results with the experiment illustrates the sensitivity of the models to the vortex circulation strength. It was determined that both strip theory and the vortex lattice method give accurate results when all the geometrical information is used. When the horizontal stabilizer and vertical tail were removed there were difficulties modeling the sideforce coefficient and pitching moment. With the removal of only the vertical tail unacceptable errors occurred when modeling the sideforce coefficient and yawing moment. Lift could not be accurately modeled with either the full geometry or the reduced geometry.

Pete, Kimberly R.↗
NASA NTRS1958

Longitudinal and Lateral Stability and Control Characteristics and Vertical-Tail-Load Measurements for a 0.03-Scale Model of the Avro CF-105 Airplane at Mach Numbers of 1.60, 1.80, and 2.00

An investigation has been made in the Langley Unitary Plan wind tunnel at Mach numbers of 1.60, 1.80, and 2.00 to determine the aerodynamic characteristics of a 0.03-scale model of the Avro CF-105 airplane. The investigation included the determination of the static longitudinal and lateral stability, the control and the hinge-moment characteristics of the elevator, rudder, and aileron, as well as the vertical-tail-load characteristics. Although the data are presented without analysis, a limited inspection of the longitudinal control results indicates a loss in maximum lift-drag ratio due to trimming of about 1.8 because of the large static margin. A reduction in static margin would be expected to improve the trim lift-drag ratio but would also reduce the directional stability. With the existing static margin, the configuration is directionally unstable at angles of attack above about 6 deg or 8 deg.

Silvers, H. Norman↗
NASA NTRS1954

Stability and Control Flight Tests of a Vertically Rising Airplane Model Similar to the Lockheed XFV-1 Airplane

This paper presents the results of an investigation of the dynamic stability and controllability of a model which approximately represents the Lockheed XFV-1 airplane to a 1/8 scale. The investigation consisted of hovering flights in still air at a considerable height above the ground, hovering flights very close to the ground, vertical take-offs and landings, flights through the transition range from hovering to normal forward flight, and sideways translational flights. The model could be flown smoothly and easily in hovering flight despite the fact that the uncontrolled pitching and yawing motions were unstable oscillations. There was a noticeable reduction in the controllability of the model when hovered very close to the ground but take-offs could be made easily and landings on a g,ven spot could be made accurately in spite of this adverse ground effect. Flights through the transition range from hovering to normal forward flight could be performed fairly easily. The model seemed to have stability of angle of attack and angle of roll over most of the transition range. The yawing motion was divergent in the very high angle-of-attack range but could be controlled easily. At the lower angles of attack, the model seemed to become stable in yaw. In sideways flight there was an increasingly strong tendency to diverge in roll as the speed was increased and finally, at a speed of about 25 knots (full scale), the model rolled off despite efforts of the pilot to control it.

Kirby, Robert H.↗
NASA NTRS1976

Structure of atmospheric turbulence in the friction layer below 500 meters

Measurements of wind direction and speed, vertical velocity, and temperature were made from several levels of the 444 m tower near Oklahoma City. Turbulence quantities were calculated from the covariances between observed variables over periods ranging from 5 min to 1 hr. It was found that in some cases parameters such as mean wind speed, shearing stress, and vertical heat flux could be expressed by simple equations for periods of 15 min to 1 hr. Changes in these quantities with time are related to changes in vertical motion and stability. Power spectra were calculated for sequential 15 min, 30 min, and 1 hr periods. The effects of stability, wind speed, and surface roughness on the spectra of longitudinal and lateral velocity were examined, along with the effect of height on the spectrum of vertical velocity. This region was shown to be composed of a lower region in which mechanical turbulence dominates and an upper region dominated by convective turbulence.

Maas, S. J.↗
NASA NTRS1943

Wind-Tunnel Tests of the 1/9-Scale Model of the Curtiss XP-62 Airplane with Various Vertical Tail Arrangements

The effect of various vertical tail arrangements upon the stability and control characteristics of an XP-62 fighter model was investigated. Rudder-free yaw characteristics with take-off power and flaps deflected were satisfactory after dorsal fin modifications. Directional stability was obtained with all modified vertical tails. Satisfactory rudder effectiveness resulted partly because the dual-rotation propellers produced no asymmetric yawing moments. Pedal forces in sideslips were undesirably large but may be easily reduced.

Wallace, Arthur R.↗
NASA NTRS1952

Experimental Determination of the Effect of Horizontal-Tail Size, Tail Length, and Vertical Location on Low-Speed Static Longitudinal Stability and Damping Pitch of a Model Having 45 Degree Sweptback Wing and Tail Surfaces

Report presents the results of an investigation conducted in the Langley stability tunnel to determine the effects of horizontal tails of various sizes and at various tail lengths (when loaded on the fuselage center line) and also the effects of vertical location of the horizontal tail relative to the wing on the low-speed static longitudinal stability and on the steady-state rotary damping in pitch for a complete-model configuration. The wing and tail surfaces had the quarter-chord lines swept back 45 degrees and had aspect ratios of 4. The results of the investigation showed that, in agreement with analytical considerations, the contribution of the horizontal tail to static longitudinal stability was related directly to the tail size and length; whereas, its contribution to damping in pitch was related directly to tail size and the square of tail length.

Lichtenstein, Jacob H↗
NASA NTRS1978

Helicopter position stabilizing system

System utilizes vertical gyroscope mounted on telescope handled by onboard observer, to help helicopter pilot fly precise circles over ground target without use of ground observer. Other possible uses include cargo discharge or pickup without ground controller, and hovering over invisible target with known coordinates.

Jenkin, K. R.↗
NASA NTRS1989

The secondary flow and its stability for natural convection in a tall vertical enclosure

The multicellular flow between two vertical parallel plates is numerically simulated using a time-splitting pseudospectral method. The steady flow of air and the time-periodic flow of oil are investigated, and descriptions of these flows using both physical and spectral approaches are presented. The time dependence of the flow and temperature fields of oil are shown, and the dynamics of the process is discussed. The spectral transfer of energy among the axial modes comprising the flow is explored. The three-dimensional linear stabiltiy of the multicellular air flow is parametrically studied. The domain of stable two-dimensional cellular motion is found to be constrained by the Eckhaus instability and by two types of monotone instability. The two-dimensional multicellular flow is unstable above a Grashof number of about 8550.

Chait, Arnon↗
NASA NTRS1993

A mesoscale gravity-wave event observed during CCOPE. IV - Stability analysis and Doppler-derived wave vertical structure

A summary of the results of a detailed study of the vertical structure of mesoscale gravity waves conducted during the Cooperative Convective Precipitation Experiment (CCOPE) is presented. Pressure perturbation fields derived from the Doppler wind fields are compared with the vertical structure of eigenfunctions resulting from a solution to the Taylor-Goldstein linear wave equation for an atmosphere whose mean state is described by vertical profiles obtained from a representative CCOPE sounding. An analysis of the potential for shear instability is also performed on all of the soundings taken on this day to assess the representativeness of the one chosen for the linear theoretical analysis.

Koch, Steven E.↗