SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The following is a summary of the status report: Oxygen concentration in liquid metal measurement; Literature search on oxygen control in liquid metal coolant in nuclear installation; Possible oxygen control in vacuum system are getter materials and cold trap; and, Initial ideas on implementation of these two methods
The California Energy Commission's Clean Transportation Program (CTP) supports a wide range of alternative, low-carbon fuel and vehicle projects. This report improves upon the 2014 Alternative and Renewable Fuel and Vehicle Technology Program (ARFVTP) Benefits Report(the former name of the Clean Transportation Program), which focused on two components of benefit calculation: expected benefits and market transformation benefits. The "expected benefits" are defined as benefits that accrue because of the direct displacement of petroleum-based fuels or vehicle technologies. The "market transformation benefits" accrue because of CTP funding shifting the underlying market dynamics and accelerating the adoption of alternative fuel vehicles. This report documents the updated methods used in the benefits analysis in 2014 and applies them for this 2021 Clean Transportation Program Benefits Report. The project team used data collected from CTP projects funded from 2009 to the third quarter of 2021 to estimate the benefits between 2021 and 2030. CTP projects valued at $\$898.3 million$ were assessed (out of $\$1.04 billion$ funded) to estimate expected benefits of 249 million gallons per year petroleum reduction and 2.79 million metric tons per year of carbon dioxide equivalent greenhouse gas (GHG) reduction in 2030. Market transformation benefits are additive to the expected benefits and were estimated with high and low ranges for the 315 relevant projects evaluated. The market transformation benefits' GHG reductions are estimated as 2.2 million to 6.2 million metric tons of carbon dioxide equivalent per year and the petroleum reductions as 145.3 million to 671.5 million gasoline gallon equivalents per year in 2030. Combining both benefit types, the CTP projects can make significant progress toward meeting California's long-term GHG and petroleum fuel use reduction goals.
It is required to find the reflection and transmission coefficients for a tapered waveguide. It is assumed that the taper is very long and gradual such that no higher order modes are excited from the discontinuity of the waveguide. Three different methods are presented for finding the reflection coefficient and two methods are presented for finding the transmission coefficient. A traditional differential equation method which finds only the reflection coefficient is presented. An additional set of differential equations are presented which finds both the reflection and transmission coefficients. A FEM (finite element method), which solves for both the reflection and transmission coefficients, is presented with its limitations. An example of a tapered coaxial line and waveguide is presented with the different methods compared and contrasted.
Additive manufacturing is a versatile technique that shows promise in providing quick and dynamic manufacturing for complex engineering problems. Research has been ongoing into the use of additive manufacturing for potential applications in radiofrequency (RF) component technologies. Here, we present a method for developing an effective prototype load produced from 316L stainless steel on a direct metal laser sintering machine. The model was tested using simulation software to verify the validity of the design. The load structure was manufactured by an online digital manufacturing company, showing the viability of using easily accessible tools to manufacture RF structures. The produced load was able to produce an S11 value of −22.8 dB at a C-band frequency of 5.712 GHz while under a vacuum. In a high-power test, the load was able to terminate a peak power of 8.1 MW. The discussion includes future applications of the present method and how it will help to improve the implementation of future accelerator concepts.
The Tandem Photovoltaics Core Program was a multi-year initiative aimed at advancing hybrid tandem solar cell technologies to enhance solar module efficiency beyond the limits of single junction devices. This project focused on the development, testing, and scaling of prototype photovoltaic devices, with the goal of achieving commercial relevance and driving industry adoption. The work was divided into three tasks: 1) Comparative Analysis of Tandem Technologies: This task focused on quantifying energy yield under real-world conditions and assessing economic viability of tandems relative to silicon-based modules. The project's modeling framework incorporated performance data, cost of materials, and manufacturing process impacts to optimize tandem designs 2) Tandem Integration and Prototyping: In this task, we developed innovative tandem designs by combining metal halide perovskite (MHP) top cells and silicon (Si) bottom cells. The project focuses on both mechanical integration and direct deposition techniques to enable compatibility with commercially relevant Si technologies, such as passivated contact or PERC cells. 3) Scale-up and Reliability: This task addressed the challenges of large-area fabrication by developing scalable deposition methods and robust interconnection schemes for tandems. The project looked at different accelerated testing such as thermal cycling, damp heat exposure, and potential induced degradation, to ensure long-term stability of devices in field conditions. Tandem solar cells can greatly increase module efficiency beyond conventional single junction (SJ) devices, which are approaching their theoretical limit. There are many ways to fabricate a tandem cell or module in terms of materials used, configuration, and terminal connection. This SETO core project focused critical factors in enabling tandems to enter the market, including hardware integration, technoeconomic analysis (TEA), and energy yield analysis. We focused on MHP/Si hybrid tandem solar cells and modules as a model system for their versatility in module design comparisons, providing valuable insights for other tandem options. While champion cells with areas <1cm2 are regularly demonstrated by groups around the world, it is significantly more challenging to translate these advances into modules, and fewer institutions and companies are working at the module level. This project addressed questions about module fabrication, testing, and reliability that are hard to answer without actually fabricating prototypes. We also performed analysis and road-mapping activities to understand the potential for a wider variety of tandems, including all-perovskite tandems fabricated in collaboration with the Perovskite PV core program. Detailed technical results from this project are described for each task in Section 7.
A test program to determine the total discomfort associated with vehicle vibration is described. The program utilizes a three-degree-of-freedom vibration simulator to determine the effects of multifrequency and multiaxis vibration inputs. The approach to multifrequency vibration includes a separate consideration of the discomfort associated with each frequency component or band of the total spectrum and a subsequent empirical weighting of the discomfort components of these frequency bands when in various random combinations. The results are in the form of equal discomfort curves that specify the discomfort associated with discrete frequencies between 1 and 30 Hz and different acceleration levels. These results provide detailed information of the human discomfort response to increases in acceleration level for each frequency investigated. More importantly, the results provide a method for adding the discomfort associated with separate frequencies to give a total typification of the discomfort of a random spectrum of vibration.
High time-resolution data from the magnetic field, plasma, energetic particle, and VLF wave experiments performed aboard Imp 6 in a study of the distant dayside cusp during substorms are described. The cusp was studied when its location was slightly equatorward of its normal location and the geomagnetic dipole was tilted in the appropriate direction. The data support both reconnection and diffusion as methods of particle entry to the magnetosphere. The evidence (1) indicates an acceleration process to explain enhancements of 400 to 600-km/sec protons above their magnetosheath intensities, and (2) suggests convection of field lines over the polar cap as a means of explaining the lack of low-energy protons near the low-latitude boundary of the cusp. Magnetic field fluctuations, a perturbation vector, ion cyclotron waves, and an abrupt change in the intensity of both whistler waves and electrostatic waves are characterized.
Ammonia has been detected in the circumstellar envelopes of VY Canis Majoris, VX Sagittarii, and IRC +10420 by means of several absorption lines in the nu-2 vibration-rotation band near 950 kaysers. The line profiles are well resolved (0.2 km/sec resolution) and show the gas being accelerated to terminal expansion velocities near 30 km/sec. The observations reveal a method for determining the position of the central star on VLBI maps of OH maser emission to an accuracy of approximately 0.2 arcsec. A firm lower limit of 2 x 10 to the 15th/sq cm is obtained for the NH3 column density in VY Canis Majoris.
Slab-symmetric and axisymmetric geometries are considered in the modeling of thermals by considering their boundaries as self-advecting vortex sheets, for the case of a neutral environment without turbulent processes. The initial accelerations for circular cross section thermals are obtained analytically, and a numerical method is developed to simulate the evolution of thermals by time-marching in which the vortex sheet is divided into finite segments whose positions are tracked in a quasi-Lagrangian fashion. Self-advection is considered, and a redistribution procedure is adopted to prevent the segments from bunching unmanageably. The induced field of motion is determined both inside and outside the thermal. It is shown that (1) the axisymmetric thermal rises more quickly than the slab-symmetric thermal, (2) vorticity maxima occur both within the concavities and on the trailing edges, and (3) the leading edges are very smooth.
Recent interpretations of laser ranging for the LAGEOS satellite have rather conclusively established that the observed acceleration in the node of its orbit is just that expected to exist as a residual effect of the last deglaciation event which ended about 6000 years ago. The nontidal acceleration of rotation would be rather different than that observed if there were any significant melting of high latitude continental ice masses currently ongoing. The sensitivity of the expected nontidal acceleration to variations of several elements of the radial viscoelastic structure of the planet is explored using a new normal mode method for the computation of viscoelastic relaxation spectra. These calculations establish that the most important sensitivity is to variations in the mantle viscosity profile. Although the predicted nontidal acceleration does depend upon lithospheric thickness and on the elastic component of the radial structure, the dependence on these components of the structure is much weaker than it is upon mantle viscosity. The observed J sub 2 is therefore a particularly useful determinant of radial variations in the latter parameter.
Measurements and theoretical predictions of the Coulomb cross section for the production of direct electron pairs by heavy ions in emulsion have been performed. Nuclear track emulsions were exposed to the 1.8 GeV/amu Fe-56 beam at the Lawrence Berkeley Laboratory bevalac and to the 60 and 200 GeV/amu O-16 and the 200 GeV/amu S-32 beam at the European Center for Nuclear Research Super Proton Synchrotron modified to accelerate heavy ions. The calculations combine the Weizsacker-Williams virtual quanta method applicable to the low-energy transfers and the Kelner-Kotov relativistic treatment for the high-energy transfers. Comparison of the measured total electron pair yield, the energy transfer distribution, and the emission angle distribution with theoretical predictions revealed a discrepancy in the frequency of occurrence of the low-energy pairs (less than or = 10 MeV). The microscope scanning criteria used to identify the direct electron pairs is described and efforts to improve the calculation of the cross section for pair production are also discussed.
In this paper, a method is developed for designing multi-stage schemes that give optimal damping of high-frequencies for a given spatial-differencing operator. The objective of the method is to design schemes that combine well with multi-grid acceleration. The schemes are tested on a nonlinear scalar equation, and compared to Runge-Kutta schemes with the maximum stable time-step. The optimally smoothing schemes perform better than the Runge-Kutta schemes, even on a single grid. The analysis is extended to the Euler equations in one space-dimension by use of 'characteristic time-stepping', which preconditions the equations, removing stiffness due to variations among characteristic speeds. Convergence rates independent of the number of cells in the finest grid are achieved for transonic flow with and without a shock. Characteristic time-stepping is shown to be preferable to local time-stepping, although use of the optimally damping schemes appears to enhance the performance of local time-stepping. The extension of the analysis to the two-dimensional Euler equations is hampered by the lack of a model for characteristic time-stepping in two dimensions. Some results for local time-stepping are presented.
Dynamic simulation of compressor and gas turbine performance is useful in a variety of design, analysis, and test applications. Mathematical models employing estimated or experimentally-derived component characteristics have been widely used, especially for near-design-point studies of acceleration and deceleration transients and control strategies. With recent progress in simulation methods and computational power, it has become possible to build models with detail at the stage level, and with fundamental fluid mechanics input. Such models are more useful because of the ability to study the details of inter-component flow property behavior during machine transients, even including stall and surge. Dynamic performance simulation models are discussed with emphasis on the fundamental principles of the models and the methods used to represent component and stage flow characteristics. Results of several simulations of the dynamic behavior of multistage compressors are shown with comparisons to experimental data. Possibilities for advanced computational techniques for near-real-time simulations of compressors and gas turbines are reviewed.
Tsien's method is extended to treat the orbital motion of a body undergoing accelerations and decelerations. A generalized solution is discussed for the generalized case where a body undergoes azimuthal and radial thrust and the problem is further simplified for azimuthal thrust alone. Judicious selection of thrust could generate either an elliptic or hyperbolic trajectory. This is unexpected especially when the body has only enough energy for a lower state trajectory. The methodology is extended treating the problem of vehicle thrust for orbiting a sphere and vehicle thrust within the classical restricted three-body problem. Results for the latter situation can produce hyperbolic trajectories through eigen value decomposition. Since eigen values for no-thrust can be imaginary, thrust can generate real eigen values to describe hyperbolic trajectories. Keplerian dynamics appears to represent but a small subset of a much larger non-Keplerian domain especially when thrust effects are considered. The need for high thrust long duration space-based propulsion systems for changing a trajectory's canonical form is clearly demonstrated.
The Modal Identification Experiment (MIE) is a proposed experiment to define the dynamic characteristics of Space Station Freedom. Previous studies emphasized free-decay modal identification. The feasibility of using a forced response method (Observer/Kalman Filter Identification (OKID)) is addressed. The interest in using OKID is to determine the input mode shape matrix which can be used for controller design or control-structure interaction analysis, and investigate if forced response methods may aid in separating closely spaced modes. A model of the SC-7 configuration of Space Station Freedom was excited using simulated control system thrusters to obtain acceleration output. It is shown that an 'optimum' number of outputs exists for OKID. To recover global mode shapes, a modified method called Global-Local OKID was developed. This study shows that using data from a long forced response followed by free-decay leads to the 'best' modal identification. Twelve out of the thirteen target modes were identified for such an output.
The 21st century is likely to see the start of the manned exploration and settlement of the inner solar system. NASA's plans for this endeavor are focused upon the Space Exploration Initiative which calls for a return to the Moon, to stay, followed by manned missions to Mars. To execute these missions safely provides solar physics with both a challenge and an opportunity. As the past solar maximum has clearly demonstrated, the Sun, through the solar flare process, is capable of generating and accelerating to high energies large fluxes of protons whose cumulative dose to unprotected astronauts can be fatal. It will be the responsibility of solar physicists to develop an accurate physical description of the mechanisms of flare energy storage and release, and of particle acceleration and propagation through interplanetary space upon which to base a sound method of flare and energetic particle prediction.
This report contains a review of various existing life prediction techniques used for a wide range of space mechanisms. Life prediction techniques utilized in other non-space fields such as turbine engine design are also reviewed for applicability to many space mechanism issues. The development of new concepts on how various tribological processes are involved in the life of the complex mechanisms used for space applications are examined. A 'roadmap' for the complete implementation of a tribological prediction approach for complex mechanical systems including standard procedures for test planning, analytical models for life prediction and experimental verification of the life prediction and accelerated testing techniques are discussed. A plan is presented to demonstrate a method for predicting the life and/or performance of a selected space mechanism mechanical component.