Search NASA⌕ Search

SEARCH · Search NASA

Results for “Atomic Interface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Interface solitons in thermal nonlinear media

We demonstrate the existence of fundamental and dipole interface solitons in one-dimensional thermal nonlinear media with a step in linear refractive index. Fundamental interface solitons are found to be always stable and the stability of dipole interface solitons depends on the difference in linear refractive index. The mass center of interface solitons always locates in the side with higher refractive index. The two intensity peaks of dipole interface solitons are unequal except under some specific conditions, which is different from their counterparts in uniform thermal nonlinear media.

74 ATOMIC AND MOLECULAR PHYSICS↗

Electron-stimulated reactions in layered CO/H{sub 2}O films: Hydrogen atom diffusion and the sequential hydrogenation of CO to methanol

Low-energy (100 eV) electron-stimulated reactions in layered H{sub 2}O/CO/H{sub 2}O ices are investigated. For CO layers buried in amorphous solid water (ASW) films at depths of 50 monolayers (ML) or less from the vacuum interface, both oxidation and reduction reactions are observed. However, for CO buried more deeply in ASW films, only the reduction of CO to methanol is observed. Experiments with layered films of H{sub 2}O and D{sub 2}O show that the hydrogen atoms participating in the reduction of the buried CO originate in the region that is 10–50 ML below the surface of the ASW films and subsequently diffuse through the film. For deeply buried CO layers, the CO reduction reactions quickly increase with temperature above ∼60 K. We present a simple chemical kinetic model that treats the diffusion of hydrogen atoms in the ASW and sequential hydrogenation of the CO to methanol to account for the observations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Difference in charge transport properties of Ni-Nb thin films with native and artificial oxide

Here, we report on the properties of native and artificial oxide amorphous thin film on a surface of an amorphous Ni-Nb sample. Careful measurements of local current-voltage characteristics of the system Ni-Nb / NiNb oxide/Pt, were carried out in contact mode of an atomic force microscope. Native oxide showed n-type conductivity, while in the artificial one exhibited p-type one. The shape of current-voltage characteristic curves is unique in both cases and no analogical behavior is found in the literature. X-ray photoelectron spectroscopy (XPS) measurements were used to detect chemical composition of the oxide films and the oxidation state of the alloy components. Detailed analysis of the XPS data revealed that the structure of natural Ni-Nb oxide film consists of Ni-NbO{sub x} top layer and nickel enriched bottom layer which provides n-type conductivity. In contrast, in the artificial oxide film Nb is oxidized completely to Nb{sub 2}O{sub 5}, Ni atoms migrate into bulk Ni-Nb matrix. Electron depletion layer is formed at the Ni-Nb/Nb{sub 2}O{sub 5} interface providing p-type conductivity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Multinuclear Copper(I) Cluster Forms the Dimerization Interface in Copper-Loaded Human Copper Chaperone for Superoxide Dismutase

Copper binding and X-ray aborption spectroscopy studies are reported on untagged human CCS (hCCS; CCS = copper chaperone for superoxide dismutase) isolated using an intein self-cleaving vector and on single and double Cys to Ala mutants of the hCCS MTCQSC and CSC motifs of domains 1 (D1) and 3 (D3), respectively. The results on the wild-type protein confirmed earlier findings on the CCS-MBP (maltose binding protein) constructs, namely, that Cu(I) coordinates to the CXC motif, forming a cluster at the interface of two D3 polypeptides. In contrast to the single Cys to Ser mutations of the CCS-MBP protein (Stasser, J. P., Eisses, J. F., Barry, A. N., Kaplan, J. H., and Blackburn, N. J. (2005) Biochemistry 44, 3143-3152), single Cys to Ala mutations in D3 were sufficient to eliminate cluster formation and significantly reduce CCS activity. Analysis of the intensity of the Cu-Cu cluster interaction in C244A, C246A, and C244/246A variants suggested that the nuclearity of the cluster was greater than 2 and was most consistent with a Cu4S6 adamantane-type species. The relationship among cluster formation, oligomerization, and metal loading was evaluated. The results support a model in which Cu(I) binding converts the apo dimer with a D2-D2 interface to a new dimer connected by cluster formation at two D3 CSC motifs. The predominance of dimer over tetramer in the cluster-containing species strongly suggests that the D2 dimer interface remains open and available for sequestering an SOD1 monomer. This work implicates the copper cluster in the reactive form and adds detail to the cluster nuclearity and how copper loading affects the oligomerization states and reactivity of CCS for its partner SOD1.

59 BASIC BIOLOGICAL SCIENCES↗

The effect of phase interface on the synthesis of SnS{sub 2}-Cu{sub 2}S

Highlights: • Opto-crystalline character of the composition of Cu{sub 2}S and S{sub 2}Sn was considered. • The formation Cu{sub 2}SnS{sub 3} is strongly related to phase separation at interface. • The entanglement of phases is strongly due to the chemical bond competition. • The suggested fluctuation region is approved by PL spectra. • Reconstruction and cluster formation is evident by formation of flat-spiral flowers. - Abstract: Optical character of crystal structure of the composition of two different semiconducting metallic sulfides, Cu{sub 2}S and S{sub 2}Sn, in pure phase formation of the ternary chalcogenide Cu{sub 2}SnS{sub 3} was considered. Because of the difficulties related to the phase separation at the definite Eutectic temperature for the composite formation, which is evident in optical absorption fluctuations, solvothermal synthesis in the intermediate temperature range 180–220 °C seems convenient where tetragonal crystal structure is investigated by XRD. Absorption fluctuations below E = E{sub g} were more pronounced for the lower limit case (180 °C) reflected in a sharp peak located at 1.48 eV on S1 as seen in UV-PL measurement. The characteristic behavior of the interface, resulting in the reconstruction and cluster formation due to the offset of bond rupturing displacement of atomic positions, is in favor of aggregation instead of agglomeration, which is evident by formation of small flat-spiral flowers in SEM images.

36 MATERIALS SCIENCE↗

Growth of Hexagonal Boron Nitride from Molten Nickel Solutions: A Reactive Molecular Dynamics Study

Metal flux methods are excellent for synthesizing high-quality hexagonal boron nitride (hBN) crystals, but the atomic mechanisms of hBN nucleation and growth in these systems are poorly understood and difficult to probe experimentally. Here, we harness classical reactive molecular dynamics (ReaxFF) to unravel the mechanisms of hBN synthesis from liquid nickel solvent over time scales up to 30 ns. These simulations mimic experimental conditions by including relatively large liquid nickel slabs containing dissolved boron and a molecular nitrogen gas phase. Overall, the reaction takes place almost exclusively on the surface of the liquid nickel, owing to the low solubility of nitrogen in bulk nickel and the intermediate species’ preference for the metal–gas interface. The formation of hBN invariably begins by reaction of dinitrogen with nickel-solvated boron atoms at the surface, forming intermediate N–N–B species, which typically evolve into B–N–B units through a short-lived intermediate where a single nitrogen atom is coordinated by one nitrogen and two boron atoms. The resulting B–N–B units, in turn, coalesce with growing hBN nuclei and carry nitrogen between hBN nanocrystals in an Ostwald ripening process. The amount of hBN produced on the tens of nanosecond time scale depends critically on the boron concentration, while having a much weaker dependence on the N 2 pressure for the regime considered (N 2 pressures of 2.5–10 MPa, Ni–B solutions with 6–12% boron by atom fraction). The highest rate of hBN formation occurs at the lowest temperature considered (1750 K, just above the melting point of nickel), while no hBN sheets are formed at 2000 K or above. An analysis of the transition pathways for nitrogen atoms shows that the final step, incorporation of small B–N motifs into larger hBN sheets, is the rate-limiting step in the regimes considered. While raising the temperature from 1750 to 2000 K has little effect on the formation of intermediates (N–N–B, B–N–B, etc.), the lack of large hBN sheets at temperatures >1900 K is explained by decreased probability of the final step and increased probability of breakup of hBN into B–N motifs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Kinetics of nickel silicide growth in silicon nanowires: From linear to square root growth

The common practice for nickel silicide formation in silicon nanowires (SiNWs) relies on axial growth of silicide along the wire that is initiated from nickel reservoirs at the source and drain contacts. In the present work the silicide intrusions were studied for various parameters including wire diameter (25-50 nm), annealing time (15-120 s), annealing temperature (300-440 deg. C), and the quality of the initial Ni/Si interface. The silicide formation was investigated by high-resolution scanning electron microscopy, high-resolution transmission electron microscopy (TEM), and atomic force microscopy. The main part of the intrusion formed at 420 deg. C consists of monosilicide NiSi, as was confirmed by energy dispersive spectroscopy STEM, selected area diffraction TEM, and electrical resistance measurements of fully silicided SiNWs. The kinetics of nickel silicide axial growth in the SiNWs was analyzed in the framework of a diffusion model through constrictions. The model calculates the time dependence of the intrusion length, L, and predicts crossover from linear to square root time dependency for different wire parameters, as confirmed by the experimental data.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Growth from Solution, Structure, and Optical Properties of Single-Crystal para-Quaterphenyl Films

Samples of single-crystal para-quaterphenyl films up to 8 mm long and 50 μm thick have been obtained for the first time by the solvent‒antisolvent growth method. The films have been grown both on the liquid–air interface and in the solution bulk. The morphology, surface quality, and thickness of crystal films have been investigated by the optical, laser confocal, and atomic force microscopies. The structure of the para-quaterphenyl single crystal at room temperature has been refined by X-ray diffraction analysis. The formation and growth mechanisms of crystal films on the liquid–air interface have been discussed. The opticalabsorption and photoluminescence spectra of the solutions and crystal samples have been investigated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impact of MgO thickness on the perpendicular magnetic anisotropy of Mo/Co2FeAl/MgO/Mo multilayers with improved annealing stability

Highlights: • Robust PMA is demonstrated for thermally stable Mo/Co{sub 2}FeAl(CFA)/MgO/Mo multilayer. • Thickness of CFA and MgO over-layer plays a main role in achieving the strong PMA. • Significant PMA energy of K{sub eff} ≈ 1.67 × 10{sup 6} erg/cm{sup 3} is achieved for film annealed at 400 °C. • Co and/or Fe – 3d{sub Z}{sup 2} and O-2P{sub Z} orbital hybridization at interface is the origin for PMA. - Abstract: In this study, an interfacial perpendicular magnetic anisotropy (PMA) is achieved in Mo/Co{sub 2}FeAl (CFA)/MgO/Mo multilayer with good thermal stability up to 400 °C by tuning the annealing temperature and film thickness of CFA and MgO. For an optimized CFA film thickness (1.0 nm) and annealing temperature (400 °C), the CFA/MgO interface plays a main role in achieving the strong PMA property when the MgO film thickness was tuned from 0.5 nm to 2.0 nm. The effective perpendicular magnetic anisotropy energy density (K{sub eff}) is approximately 1.67 × 10{sup 6} erg/cc when t{sub MgO} = 2 nm. Surface morphology and surface roughness changes in the films are investigated by atomic force microscopy (AFM). An enhancement in surface smoothness is observed for the annealed films. X-ray photoelectron spectroscopy (XPS) reveals that the strong PMA in Mo/CFA/MgO is originated from the adequate oxidation of Co and Fe at CFA/MgO interface.

36 MATERIALS SCIENCE↗

Chemical Bonding, Interfaces and Defects in Hafnium Oxide/Germanium Oxynitride Gate Stacks on Ge (100)

Correlations among interface properties and chemical bonding characteristics in HfO{sub 2}/GeO{sub x}N{sub y}/Ge MIS stacks were investigated using in-situ remote nitridation of the Ge (100) surface prior to HfO{sub 2} atomic layer deposition (ALD). Ultra thin ({approx}1.1 nm), thermally stable and aqueous etch-resistant GeO{sub x}N{sub y} interfaces layers that exhibited Ge core level photoelectron spectra (PES) similar to stoichiometric Ge{sub 3}N{sub 4} were synthesized. To evaluate GeO{sub x}N{sub y}/Ge interface defects, the density of interface states (D{sub it}) was extracted by the conductance method across the band gap. Forming gas annealed (FGA) samples exhibited substantially lower D{sub it} ({approx} 1 x 10{sup 12} cm{sup -2} eV{sup -1}) than did high vacuum annealed (HVA) and inert gas anneal (IGA) samples ({approx} 1x 10{sup 13} cm{sup -2} eV{sup -1}). Germanium core level photoelectron spectra from similar FGA-treated samples detected out-diffusion of germanium oxide to the HfO{sub 2} film surface and apparent modification of chemical bonding at the GeO{sub x}N{sub y}/Ge interface, which is related to the reduced D{sub it}.

36 MATERIALS SCIENCE↗

Unveiling interfaces between In-rich and Ga-rich GaInP vertical slabs of laterally composition modulated structures

Here, we report changes at the interface between Ga-rich/In-rich GaInP vertical slabs in laterally composition modulated (LCM) GaInP as a function of the V/III ratio. The photoluminescence exhibits satellite peaks, indicating that the parasitic potential between the GaInP vertical slabs disappears as the V/III ratio decreases. However, a high V/III ratio leads to an abrupt interface, increasing the parasitic potential because of the phosphorus-amount-dependent diffusion of group-III atoms during growth. These results suggest that the V/III ratio is an important parameter that must be wisely chosen in designing optoelectronic devices incorporating LCM structure.

36 MATERIALS SCIENCE↗

Influence of interface mobility on the evolution of Austenite-Martensite grain assemblies during annealing

The quenching and partitioning (Q&P) process is a new heat treatment for the creation of advanced high-strength steels. This treatment consists of an initial partial or full austenitization, followed by a quench to form a controlled amount of martensite and an annealing step to partition carbon atoms from the martensite to the austenite. In this work, the microstructural evolution during annealing of martensite-austenite grain assemblies has been analyzed by means of a modeling approach that considers the influence of martensite-austenite interface migration on the kinetics of carbon partitioning. Carbide precipitation is precluded in the model, and three different assumptions about interface mobility are considered, ranging from a completely immobile interface to the relatively high mobility of an incoherent ferrite-austenite interface. Simulations indicate that different interface mobilities lead to profound differences in the evolution of microstructure that is predicted during annealing.

36 MATERIALS SCIENCE↗

The importance of anharmonicity in thermal transport across solid-solid interfaces

Understanding interfacial thermal transport is of great importance for applications like energy devices and thermal management of electronics. Despite the significant efforts in the past few decades, thermal transport across solid-solid interfaces is still not fully understood and cannot be accurately predicted. Anharmonicity is often ignored in many prediction models, such as the mismatch models, the wave-packet method, and the Atomic Green's function. In this paper, we use molecular dynamics to systematically study the role of anharmonicity in thermal transport across solid-solid interfaces. The interatomic interactions are modeled using force constants up to the third order. This model allows controlling the anharmonicity independently by tuning the cubic force constants. The interfacial thermal conductance as a function of anharmonicity inside the materials and that at the interface is studied. We found that the anharmonicity inside the materials plays an important role in the interfacial thermal transport by facilitating the energy communication between different phonon modes. The anharmonicity at the interface has much less impact on the interfacial thermal transport. These results are important to the modification of traditional models to improve their prediction power.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Size-distribution evolution of ion-beam-synthesized nanoclusters in silica

A model to describe the growth of nanoclusters in silica via ion-beam synthesis is introduced. Kinetic Monte Carlo simulations indicate that nucleation, growth, coarsening, and fragmentation occur throughout implantation, leading to a steady-state size-distribution shape that agrees with experimental observations. A set of coupled rate equations are derived and solved within a self-consistent mean-field approximation. An intermediate asymptotic scaling analysis helps to identify the important experimentally accessible parameters that control ion-beam-synthesized nanocluster size distributions. The model predicts that the shape of the as-implanted size distribution depends only on a characteristic length governed by the effective diffusivity, effective ion solubility, and the volumetric flux while the average cluster size is determined by the solute/matrix interface energy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Surface-Directed Fabrication of Integrated Membrane-Electrode Interfaces

In the past five years, we have established a research program to investigate the integration of electrode/catalyst support, gas diffusion pathways, and ionomer into a single network based on a bottom-up, surface-directed approach. Here, the porous electrode surface provides the common foundation for both catalyst deposition and ionomer growth to develop a highly controlled process. Our efforts have focused on (1) the preparation of surface-initiated ionomer that can be grown from electrodes of essentially any geometry and is chemisorbed to the active electrode surface, and (2) the integration of this ionomer with both planar and 3-D electrodes that are atomically modified by Pt catalysts. Figure 1 shows a schematic of a single pore of such an integrated cathode where a catalytic Pt atomic layer is supported along the pores of a nanoporous gold electrode. The catalyst layer is electronically accessible from the metal cathode and in contact with proton-conducting ionomer to yield extremely high utilization efficiencies of the catalyst (approaching 100%) with the ultralow loadings expected from atomic overlayers. We have introduced a new class of ionomer film that is grown from the catalyst/electrode interface to develop proton conducting pathways throughout the 3-D electrode and to the adsorbed catalyst particles. This ionomer is a comb polymer designed to contain sulfonate-lined channels for rapid proton conduction as well as hydrophobic domains (fluorocarbon or hydrocarbon) to promote O 2 solubility and transfer. This interfacial ionomer is designed to interface with a bulk membrane (such as Nafion) and an anode that could be engineered in a similar way. A key conclusion thus far is that ionomer and Pt catalyst can be integrated at a single interface (both 2-D and 3-D) to provide a high level of control over the construction of electrodes. To expand our efforts to date, we seek to utilize the materials chemistry we have developed to investigate how the depth-dependent structure of an ionomer film affects its performance in transferring protons and oxygen to accelerate the rate of the oxygen reduction reaction. By correlating structure and composition to performance and identifying barriers that limit efficiency, we seek to design ultra high performance ionomer films that are customized for the oxygen reduction reaction.

08 HYDROGEN↗

Validating first-principles molecular dynamics calculations of oxide/water interfaces with x-ray reflectivity data

Metal oxide/water interfaces play a crucial role in many electrochemical and photocatalytic processes, such as photoelectrochemical water splitting, the creation of fuel from sunlight, and electrochemical CO 2 reduction. First-principles electronic structure calculations can reveal unique insights into these processes, such as the role of the alignment of the oxide electronic energy levels with those of liquid water. An essential prerequisite for the success of such calculations is the ability to predict accurate structural models of these interfaces, which in turn requires careful experimental validation. Here we report a general, quantitative validation protocol for first-principles molecular dynamics simulations of oxide/aqueous interfaces. The approach makes direct comparisons of interfacial x-ray reflectivity (XR) signals from experimental measurements and those obtained from ab initio simulations with semilocal and van der Waals functionals. The protocol is demonstrated here for the case of the Al 2 O 3 (001)/water interface, one of the simplest oxide/water interfaces. We discuss the technical requirements needed for validation, including the choice of the density functional, the simulation cell size, and the optimal choice of the thermodynamic ensemble. Our results establish a general paradigm for the validation of structural models and interactions at solid/water interfaces derived from first-principles simulations. Furthermore, while there is qualitative agreement between the simulated structures and the experimental best-fit structure, direct comparisons of simulated and measured XR intensities show quantitative discrepancies that derive from both bulk regions (i.e., alumina and water) as well as the interfacial region, highlighting the need for accurate density functionals to properly describe interfacial interactions. Our results show that XR data are sensitive not only to the atomic structure (i.e., the atom locations) but also to the electron-density distributions in both the substrate and at the interface.

36 MATERIALS SCIENCE↗

Mixed Conducting Electrodes for Better AMTEC Cells

Electrode materials that exhibit mixed conductivity (that is, both electronic and ionic conductivity) have been investigated in a continuing effort to improve the performance of the alkali metal thermal-to-electric converter (AMTEC). These electrode materials are intended primarily for use on the cathode side of the sodium-ion-conducting solid electrolyte of a sodium-based AMTEC cell. They may also prove useful in sodium-sulfur batteries, which are under study for use in electric vehicles. An understanding of the roles played by the two types of conduction in the cathode of a sodium-based AMTEC cell is prerequisite to understanding the advantages afforded by these materials. In a sodium-based AMTEC cell, the anode face of an anode/solid-electrolyte/cathode sandwich is exposed to Na vapor at a suitable pressure. Upon making contact with the solid electrolyte on the anode side, Na atoms oxidize to form Na+ ions and electrons. Na+ ions then travel through the electrolyte to the cathode. Na+ ions leave the electrolyte at the cathode/electrolyte interface and are reduced by electrons that have been conducted through an external electrical load from the anode to the cathode. Once the Na+ ions have been reduced to Na atoms, they travel through the cathode to vaporize into a volume where the Na vapor pressure is much lower than it is on the anode side. Thus, the cathode design is subject to competing requirements to be thin enough to allow transport of sodium to the low-pressure side, yet thick enough to afford adequate electronic conductivity. The concept underlying the development of the present mixed conducting electrode materials is the following: The constraint on the thickness of the cathode can be eased by incorporating Na+ -ionconducting material to facilitate transport of sodium through the cathode in ionic form. At the same time, by virtue of the electronically conducting material mixed with the ionically conducting material, reduction of Na+ ions to Na atoms can take place throughout the thickness of the cathode. The net effect is to reduce the diffusion and flow resistance to sodium through the electrode while reducing the electronic resistance by providing shorter conduction paths for electrons. Reduced resistance to both sodium transport and electronic conductivity results in an increase in electric power output.

Ryan, Margaret↗

Influence of oxygen pressure and aging on LaAlO{sub 3} films grown by pulsed laser deposition on SrTiO{sub 3} substrates

The crystal structures of LaAlO{sub 3} films grown by pulsed laser deposition on SrTiO{sub 3} substrates at oxygen pressure of 10{sup −3} millibars or 10{sup −5} millibars, where kinetics of ablated species hardly depend on oxygen background pressure, are compared. Our results show that the interface between LaAlO{sub 3} and SrTiO{sub 3} is sharper when the oxygen pressure is lower. Over time, the formation of various crystalline phases is observed while the crystalline thickness of the LaAlO{sub 3} layer remains unchanged. X-ray scattering as well as atomic force microscopy measurements indicate three-dimensional growth of such phases, which appear to be fed from an amorphous capping layer present in as-grown samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗