Search NASA⌕ Search

SEARCH · Search NASA

Results for “BALLISTICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

A shock-tube study of radiation behind shock waves in CO2 with application to Venus entry

The arc-driven Langley 6-inch shock tube has been used to produce shock waves in CO2 in the speed range between 9 and 13 km/sec at ambient pressures between 0.1 and 5 torr. These pressures correspond approximately to equivalent Venus altitudes between 100 and 80 km. Radiation intensity profiles behind the shock waves have been observed for several wavelengths at which the important species emit. Observation and analysis of the luminosity profiles in the zone of chemical nonequilibrium have been given particular emphasis. The results of the measurements are employed in the prediction of nonequilibrium radiative heating to a typical blunt-body probe entering the Venus atmosphere on a ballistic trajectory.

Nealy, J. E.↗

Comet Encke flyby - Asteroid rendezvous mission

A multitarget mission mode is described which utilizes the solar electric propulsion (SEP) capability to rendezvous with an asteroid after the encounter with Encke. This mode can be defined as a 'no-risk' Encke flyby mission relative to SEP technology. Launched in mid-1980, the earth-Encke transfer is all-ballistic, and SEP operation begins after comet encounter and is relied upon only to accomplish the secondary target objectives. The discussion is based on an exploratory analysis and is therefore limited in scope to a description of trajectory profile and spacecraft mass characteristics.

Friedlander, A. L.↗

Mission strategy for cometary exploration in the 1980's

A sequence of ballistic intercept missions to comets is proposed. The mission set is composed of a well-known group of periodic comets whose physical properties are dissimilar. In addition to full descriptions of the nominal mission profiles, earth-based sighting conditions and estimates of cometary ephemeris errors are presented for each target comet. The first mission of the sequence is a slow flyby (approximately 8 km/sec) of Encke's comet near its perihelion in 1980. Because of a near resonance in the orbital periods of Encke and the spacecraft, it is possible to retarget the spacecraft for a second Encke encounter in 1984. The second mission of the sequence also consists of two cometary encounters but in this case different comets are involved; Giacobini-Zinner in 1985 and Borrelly in 1987. The final mission of the sequence calls for a simultaneous launch of two spacecraft towards Halley's comet in 1985. One spacecraft is targeted fo a pre-perihelion intercept at a heliocentric distance of 1.37 AU.

Farquhar, R. W.↗

Laboratory study of sonic booms and their scaling laws

This program undertook to seek a basic understanding of non-linear effects associated with caustics, through laboratory simulation experiments of sonic booms in a ballistic range and a coordinated theoretical study of scaling laws. Two cases of superbooms or enhanced sonic booms at caustics have been studied. The first case, referred to as acceleration superbooms, is related to the enhanced sonic booms generated during the acceleration maneuvers of supersonic aircrafts. The second case, referred to as refraction superbooms, involves the superbooms that are generated as a result of atmospheric refraction. Important theoretical and experimental results are briefly reported.

Toong, T. Y.↗

Performance of a UTC FW-4S solid propellant rocket motor under the command effects of simulated altitude and rotational spin

One United Technology Center FW-4S solid-propellant rocket motor was fired at an average simulated altitude of 103,000 ft while spinning about its axial centerline at 180 rpm. The objectives of the test program were to determine motor altitude ballistic performance including the measurement of the nonaxial thrust vector and to demonstrate structural integrity of the motor case and nozzle. These objectives are presented and discussed.

Merryman, H. L.↗

Electrostatic dust transport and its consequences for the lunar ranging experiment

Attempts made to qualitatively model the available data concerning the electrostatic transport of dust on the lunar surface are noted. Charged dust grains, held in place by adhesive forces, are shot into space at velocities of hundreds of meters per second. Larger particles, because of their greater charge, are quickly decelerated in the nearby fields, while the smaller grains travel in ballistic trajectories for hundreds of kilometers. Flux estimates indicate that there is little danger to the optical corner reflectors for the next few decades.

Silverberg, E. C.↗

Heliocentric interplanetary low thrust trajectory optimization program, supplement 1

The modifications and improvements made to the HILTOP electric propulsion trajectory optimization computer program up through the end of 1974 is described. New program features include the simulation of power degradation, housekeeping power, launch asymptote declination optimization, and powered and unpowered ballistic multiple swingby missions with an optional deep space burn. The report contains the new analysis describing these features, a complete description of program input quantities, and sample cases of computer output illustrating the new program capabilities.

Mann, F. I.↗

A study of unmanned mission opportunities to comets and asteroids

Several unmanned multiple-target mission opportunities to comets and asteroids were studied. The targets investigated include Grigg-Skjellerup, Giacobini-Zinner, Tuttle-Giacobini-Kresak, Borrelly, Halley, Schaumasse, Geographos, Eros, Icarus, and Toro, and the trajectories consist of purely ballistic flight, except that powered swingbys and deep space burns are employed when necessary. Optimum solar electric rendezvous trajectories to the comets Giacobini-Zinner/85, Borrelly/87, and Temple (2)/83 and /88 employing the 8.67 kw Sert III spacecraft modified for interplanetary flight were also investigated. The problem of optimizing electric propulsion heliocentric trajectories, including the effects of geocentric launch asymptote declination on launch vehicle performance capability, was formulated, and a solution developed using variational calculus techniques. Improvements were made to the HILTOP trajectory optimization computer program. An error analysis of high-thrust maneuvers involving spin-stabilized spacecraft was developed and applied to a synchronous meteorological satellite mission.

Mann, F. I.↗

HILTOP supplement: Heliocentric interplanetary low thrust trajectory optimization program, supplement 1

Modifications and improvements are described that were made to the HILTOP electric propulsion trajectory optimization computer program during calendar years 1973 and 1974. New program features include the simulation of power degradation, housekeeping power, launch asymptote declination optimization, and powered and unpowered ballistic multiple swingby missions with an optional deep space burn.

Mann, F. I.↗

The relative effects of entry parameters on thermal protection system weight

Shielding a spacecraft from the severe thermal environment of an atmospheric entry requires a sophisticated thermal protection system (TPS). Thermal computer program models were developed for two such TPS designs proposed for the space shuttle orbiter. The multilayer systems, a reusable surface insulation TPS, and a re-radiative metallic skin TPS, were sized for a cross-section of trajectories in the entry corridor. This analysis indicates the relative influence of the entry parameters on the weight of each TPS concept. The results are summarized graphically. The trajectory variables considered were down-range, cross-range, orbit inclination, entry interface velocity and flight path angle, maximum heating rate level, angle of attack, and ballistic coefficient. Variations in cross-range and flight path angle over the ranges considered had virtually no effect on the required entry TPS weight. The TPS weight was significantly more sensitive to variations in angle of attack than to dispersions in the other trajectory considered.

Hirasaki, P. N.↗

Planetary entry aerothermodynamics. I - Technology requirements and experimental facilities

Consideration has been given to the entry of vehicles into the atmospheres of all planets with the exception of Pluto and to missions for returning samples to Earth from all the planets (excepting Pluto), the satellites of Mars, Jupiter, and Saturn, the Moon, the asteroids, and certain comets. The efficient planning of the space missions including the appropriate design of the spacecraft requires that operational and environmental parameter values for the large range of mission options included be adequately known. The need to obtain the data required as a basis for the computational studies involved makes it necessary to conduct a comprehensive experimental research program. Details concerning the experimental facilities employed in this program are discussed, giving attention to shock tubes, the planetary-entry radiation facility, ballistic ranges, an expansion tube, a hypersonic tetrafluoromethane tunnel, and arcjet facilities.

Olstad, W. B.↗

Mission applications of electric propulsion

This paper reviews the mission applications of electric propulsion. The energy requirements of candidate high-energy missions gaining in NASA priority are used to highlight the potential of electric propulsion. Mission-propulsion interfaces are examined to point out differences between chemical and electric applications. Brief comparisons between ballistic requirements and capabilities and those of electric propulsion show that electric propulsion is presently the most practical and perhaps the only technology which can accomplish missions with these energy requirements.

Atkins, K. L.↗

SERV - A reusable single stage to orbit space shuttle concept

Feasibility studies were made on the SERV (Single-stage Earth-orbital Reusable Vehicle), which is a single-stage, fully reusable space shuttle concept. The studies show that a reusable single-stage-to-orbit shuttle can be built using present technology. The SERV satisfies all of NASA's requirements for low earth orbital and space station resupply missions. The baseline vehicle has a modified Apollo external configuration, 90 ft in diameter and 66 ft in height, with a cargo hold 23 ft in diameter and 60 ft long. Take-off is vertical, powered by an integral aerospike rocket engine. An Apollo-type ballistic reentry profile is used, and precision vertical landing is possible with power provided by an array of turbojet engines. The key feasibility issues discussed are engine performance, aerodynamic drag, subsystem weights, method and type of thermal protection during reentry, descent aerodynamic characteristics, and landing method.

Tharratt, C. E.↗

Aerodynamic characteristics of the planetary atmosphere experiments test entry probe

The aerodynamic characteristics of the Planetary Atmosphere Experiments Test entry probe were determined experimentally in ballistic range tests over a wide range of Mach and Reynolds numbers, and were compared with full-scale flight results. The ground facility data agreed with the full-scale data within 2 to 3% in drag coefficient, and within 5 to 10% in static stability, at the higher Mach numbers. Comparisons of the flight data with conventional wind-tunnel data indicated a significant disagreement in drag coefficient in the transonic speed range suggestive of important sting or wall interference effects. Variations in drag coefficient with Mach number were very small hypersonically, but variations with Reynolds number were of the order of 15% at a free-stream Mach number of 13 over the Reynolds number range from 10,000 to 1,000,000. Variations in the lift and static-stability curves with Mach number and Reynolds number were also defined.

Sammonds, R. I.↗

Computers vs. wind tunnels for aerodynamic flow simulations

It is pointed out that in other fields of computational physics, such as ballistics, celestial mechanics, and neutronics, computations have already displaced experiments as the principal means of obtaining dynamic simulations. In the case of aerodynamic investigations, the complexity of the computational work involved in solving the Navier-Stokes equations is the reason that such investigations rely currently mainly on wind-tunnel testing. However, because of inherent limitations of the wind-tunnel approach and economic considerations, it appears that at some time in the future aerodynamic studies will chiefly rely on computational flow data provided by the computer. Taking into account projected development trends, it is estimated that computers with the required capabilities for a solution of the complete viscous, time-dependent Navier-Stokes equations will be available in the mid-1980s.

Chapman, D. R.↗

Multiringed basins - Illustrated by Orientale and associated features

Geologic mapping and photographs of the Orientale multiring basin are studied as to origin, size, and nature and distribution of ejecta. Six facies of ejecta are observed around the Cordillera Mountains: concentric, radial, smooth plains, grooved, secondary impact craters, and fissured. Transport of these ejecta occurred by block gliding, landsliding, debris flow, and possibly by base surge, viscous flow, and ballistic ejection. The ejecta are mainly clastic types, but melts and annealed breccias are expected to be abundant. Mixing of ejecta and substrate materials must have occurred; compositions of the ejecta are probably zoned laterally and vertically.

Moore, H. J.↗

Outer planet entry nonequilibrium heating

An analytical tool has been developed which enables the impact of nonequilibrium effects on outer planet entry heating to be estimated. The analysis combines recent shock tube experiments, flow field calculations, and planetary entry trajectory analysis. The thickness of the nonequilibrium layer and its variation around the entry body have been correlated by a reaction flow parameter over a wide range of entry conditions. The influence of nonequilibrium effects on heating during entry into Saturn and Jupiter model atmospheres has been studied and the effect of vehicle size and ballistic coefficient determined. A nonequilibrium layer of significant thickness was found to exist during portions of entry into Saturn and Jupiter warm atmospheres. However, the nonequilibrium layer was found to be thin during the peak heating portions of the trajectory and resulted in reductions in total probe heating of less than 15 per cent.

Leibowitz, L. P.↗

Solar electric propulsion mission and spacecraft capabilities for outer planet exploration

This paper provides an update on solar electric-propulsion (SEP) technology by describing how SEP, as currently understood, performs relative to chemical-ballistic options on a limited set of missions for exploring the outer planets. A spacecraft design for these missions is discussed which embodies the findings of a study and development effort by NASA's Office of Space Science and Office of Advanced Systems Technology.

Atkins, K. L.↗