Search NASA⌕ Search

SEARCH · Search NASA

Results for “FASTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Diagnostics for fast ignition science (invited)

The ignition concept for electron fast ignition inertial confinement fusion requires sufficient energy be transferred from an {approx}20 ps laser pulse to the compressed fuel via approximately MeV electrons. We have assembled a suite of diagnostics to characterize such transfer, simultaneously fielding absolutely calibrated extreme ultraviolet multilayer imagers at 68 and 256 eV; spherically bent crystal imagers at 4.5 and 8 keV; multi-keV crystal spectrometers; MeV x-ray bremmstrahlung, electron and proton spectrometers (along the same line of sight), and a picosecond optical probe interferometer. These diagnostics allow careful measurement of energy transport and deposition during and following the laser-plasma interactions at extremely high intensities in both planar and conical targets. Together with accurate on-shot laser focal spot and prepulse characterization, these measurements are yielding new insights into energy coupling and are providing critical data for validating numerical particle-in-cell (PIC) and hybrid PIC simulation codes in an area crucial for fast ignition and other applications. Novel aspects of these diagnostics and how they are combined to extract quantitative data on ultrahigh intensity laser-plasma interactions are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fast electron bremsstrahlung in axisymmetric magnetic configuration

The nonthermal bremsstrahlung is calculated in a plasma with arbitrary axisymmetric magnetic configuration, taking into account the relativistic angular anisotropy of the radiation cross section at high photon energies, the helical winding of the field lines on the magnetic flux surfaces, and the poloidal variation of the electron distribution function including particle trapping effects. The fast electron dynamics during current drive in tokamaks and reverse field pinches can be investigated in detail by coupling this calculation to a bounce-averaged relativistic Fokker-Planck solver, which calculates the electron distribution function. The asymmetry between high- and low-field side hard x-ray emission intensity that has been measured on the Tore-Supra tokamak [Equipe TORE SUPRA, in Proceedings of the 15th Conference on Plasma Physics and Controlled Nuclear Fusion Research, Seville (International Atomic Energy Agency, Vienna, 1995) Vol. 1, IAEA-CN-60/A1-5 (Institute of Physics, Bristol, U.K., 1995), p. 105] is explained for the first time by the role of trapped electrons. A much stronger poloidal asymmetry is predicted for the line-integrated fast electron bremsstrahlung in the poloidal plane of the Madison Symmetric Torus [R. N. Dexter et al., Fusion Tech. 19, 131 (1991)], since the helical winding of the magnetic field lines is much larger for a reverse field pinch configuration. In this case, the hard x-ray emission is no longer a flux surface quantity, which prevents local reconstructions using a standard Abel inversion, whatever the geometrical arrangement of the lines of sight.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laser-driven fast electron dynamics in gaseous media under the influence of large electric fields

We present the results of experiments performed at the LULI laboratory, using the 100 TW laser facility, on the study of the propagation of fast electrons in gas targets. The implemented diagnostics included chirped shadowgraphy and proton imaging. Proton images showed the presence of very large fields in the gas (produced by charge separation). In turn, these imply a strong inhibition of propagation, and a slowing down of the fast electron cloud as it penetrates in the gas. Indeed chirped shadowgraphy images show a reduction in time of the velocity of the electron cloud from the initial value, of the order of a fraction of c, over a time scale of a few picoseconds.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Micro differential thermal analysis detection of adsorbed explosive molecules using microfabricated bridges

Although micromechanical sensors enable chemical vapor sensing with unprecedented sensitivity using variations in mass and stress, obtaining chemical selectivity using the micromechanical response still remains as a crucial challenge. Chemoselectivity in vapor detection using immobilized selective layers that rely on weak chemical interactions provides only partial selectivity. Here we show that the very low thermal mass of micromechanical sensors can be used to produce unique responses that can be used for achieving chemical selectivity without losing sensitivity or reversibility. We demonstrate that this method is capable of differentiating explosive vapors from nonexplosives and is additionally capable of differentiating individual explosive vapors such as trinitrotoluene, pentaerythritol tetranitrate, and cyclotrimethylenetrinitromine. This method, based on a microfabricated bridge with a programmable heating rate, produces unique and reproducible thermal response patterns within 50 ms that are characteristic to classes of adsorbed explosive molecules. We demonstrate that this micro-differential thermal analysis technique can selectively detect explosives, providing a method for fast direct detection with a limit of detection of 600 x 10{sup -12} g.

Senesac, Larry R↗

Fast imaging system on Tore Supra

A new endoscope aiming at transferring the image of a poloidal section of the Tore Supra plasma to a fast camera able to record frames at a speed up to 4800 frames per second at full resolution, or much faster for a limited number of pixel, has been installed on Tore Supra. First movies showing the light emission associated to fast phenomena such as plasma start up, disruptions or gas and pellet injections have been produced.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Fast magnetic reconnection in a kinked current sheet

Magnetic reconnection processes in a kinked current sheet are investigated using three-dimensional electromagnetic particle-in-cell simulations in a large system where both the tearing and kink modes are able to be captured. The spatial resolution is efficiently enhanced using the adaptive mesh refinement and particle splitting-coalescence method. The kink mode scaled by the current sheet width such as k{sub y}L{approx}1 is driven by the ions that are accelerated due to the reconnection electric field in the ion-scale diffusion region. Although the kink mode deforms the current sheet structure drastically, the gross rate of reconnection is almost identical to the case without the kink mode and fast magnetic reconnection is achieved. The magnetic dissipation mechanism is, however, found very different between the cases with and without the kink mode. The kink mode broadens the current sheet width and reduces the electron flow velocity, so that the electron inertia resistivity is decreased. Nevertheless, anomalous dissipation through the electron thermalization compensates the decrease in the inertia resistivity so as to keep a high reconnection rate. This suggests that the electron dynamics in the electron diffusion region is automatically adjusted so as to generate sufficient dissipation for fast magnetic reconnection. The electron thermalization occurs effectively because the electron meandering scale along the current sheet is comparable to the wavelength of the kink mode. On the other hand, two-dimensional simulations in the plane orthogonal to the magnetic field shows that in higher mass ratio cases with m{sub i}/m{sub e}>100 the electron thermalization is caused due to a hybrid-scale mode with wavelength intermediate between the ion and electron inertia lengths k{sub y}{radical}({lambda}{sub i}{lambda}{sub e}){approx}1 rather than the large-scale kink mode with k{sub y}L{approx}1, because the electron meandering scale is shortened as the mass ratio increases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fast imaging of transients and coherent magnetohydrodynamic modes in DIII-D

A fast framing camera is used to image plasma waves and instabilities in the DIII-D tokamak [J. L. Luxon, Nucl. Fusion 42, 614 (2002)] in unprecedented detail including tearing modes (TMs) and sawtooth crashes. To image core magnetohydrodynamic (MHD) activity, the fast camera detects visible bremsstrahlung emission {epsilon}{sub B} in moderate to high density plasmas. For coherent MHD activity such as TMs, high-resolution two-dimensional images of mode amplitude and phase are obtained by Fourier filtering each pixel's time series at the mode frequency. Images of m/n=2/1 TMs show that inside the q=2 surface, the camera measurements are in excellent agreement with an analytic model of a 2/1 island superimposed on the equilibrium {epsilon}{sub B} profile. Direct comparison of the measurements to a NIMROD simulation shows significant discrepancies, most likely due to artificially high-density diffusion used in the code for numerical stability. The first visible-light images of transient sawtooth crashes show the structure and location of the perturbed emission from an m=1 precursor oscillation and show that during the nonlinear crash phase the instability extends to more than half of the plasma minor radius.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development and Testing of Gallium Arsenide Photoconductive Detectors for Ultra Fast, High Dose Rate Pulsed Electron and Bremsstrahlung Radiation Measurements

Real time radiation dose measurements are challenging in high dose rate environments such as those used for testing electronic devices or biological agents. Dosimetry needs in pulsed reactor fields and particle accelerator facilities require development of dosimeters with fast (10 s of picoseconds) response to pulsed radiation, linear response over a wide range of dose rates (up to 10{sup 11} Gy/s), high resistance to radiation damage, and successful operation in mixed gamma and neutron environments. Gallium arsenide photoconductive detectors (GaAs PCD) have been shown to exhibit many of these desirable characteristics, especially fast time response. Less than 50 ps time resolution has been demonstrated when previously irradiated by fission neutrons. We have conducted a study of the response-time dependence on neutron fluence, starting with fluences at {approx}10{sup 14} n/cm{sup 2}. A 23-MeV electron beam was used to produce photoneutrons in a tungsten target for irradiation of a GaAs wafer from which PCDs were made. The process was modeled using MCNPX computer code and the simulation results were compared to the experimental measurements. GaAs PCDs were fabricated from both neutron-irradiated and non-irradiated GaAs samples. The results of the preliminary tests of these devices in accelerator-produced pulses of electron and bremsstrahlung radiation of various energies (13 to 35 MeV) and pulse lengths (100 ps to 4 {mu}s) are presented together with an overview of the future plans of continuing GaAs PCD research at Idaho State University.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Fast Fall-time Ion Beam in Neutron Generators

Ion beam with a fast fall time is useful in building neutron generators for the application of detecting hidden, gamma-shielded SNM using differential die-away (DDA) technique. Typically a fall time of less than 1 {mu}s can't be achieved by just turning off the power to the ion source due to the slow decay of plasma density (partly determined by the fall time of the RF power in the circuit). In this paper, we discuss the method of using an array of mini-apertures (instead of one large aperture beam) such that gating the beamlets can be done with low voltage and a small gap. This geometry minimizes the problem of voltage breakdown as well as reducing the time of flight to produce fast gating. We have designed and fabricated an array of 16 apertures (4x4) for a beam extraction experiment. Using a gating voltage of 1400 V and a gap distance of 1 mm, the fall time of extracted ion beam pulses is less than 1 {mu}s at various beam energies ranging between 400 eV to 800 eV. Usually merging an array of beamlets suffers the loss of beam brightness, i.e., emittance growth, but that is not an important issue for neutron source applications.

43 PARTICLE ACCELERATORS↗

Scintillator based detector for fast-ion losses induced by magnetohydrodynamic instabilities in the ASDEX upgrade tokamak

A scintillator based detector for fast-ion losses has been designed and installed on the ASDEX upgrade (AUG) tokamak [A. Herrmann and O. Gruber, Fusion Sci. Technol. 44, 569 (2003)]. The detector resolves in time the energy and pitch angle of fast-ion losses induced by magnetohydrodynamics (MHD) fluctuations. The use of a novel scintillator material with a very short decay time and high quantum efficiency allows to identify the MHD fluctuations responsible for the ion losses through Fourier analysis. A Faraday cup (secondary scintillator plate) has been embedded behind the scintillator plate for an absolute calibration of the detector. The detector is mounted on a manipulator to vary its radial position with respect to the plasma. A thermocouple on the inner side of the graphite protection enables the safety search for the most adequate radial position. To align the scintillator light pattern with the light detectors a system composed by a lens and a vacuum-compatible halogen lamp has been allocated within the detector head. In this paper, the design of the scintillator probe, as well as the new technique used to analyze the data through spectrograms will be described. A last section is devoted to discuss the diagnosis prospects of this method for ITER [M. Shimada et al., Nucl. Fusion 47, S1 (2007)].

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A simulation study of fast ignition with ultrahigh intensity lasers

The coupling efficiency between the ignition laser and the target core for the fast ignition concept is studied using two-dimensional particle-in-cell simulations. The details of the energy transport within the weakly collisional overdense plasma of a fast ignition target are examined by performing a series of particle-in-cell simulations, where the intensity incident on a 100 times critical plasma with 50 {mu}m radius is varied between each simulation. The simulations show that the peak energy flux of the ignition electrons is significantly lowered as the electrons traverse the collisionless plasma from the critical density through a weakly collisional overdense plasma region. This allows higher intensity lasers to be used thereby improving the coupling efficiency. In addition, we find that a higher percentage of the ignition laser energy is delivered to the core of the simulation target at higher intensity. The coupling efficiency increases in time during the simulations which are run for 2.5 ps. For a laser intensity of 8x10{sup 20} W/cm{sup 2} the simulations indicate that more than 15% of the incident laser energy is eventually absorbed in a dense plasma core.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ICF APPLICATIONS OF FAST IONS GENERATED BY FOCUSING SHORT LASER PULSES ON ULTRA-THIN CAUSALLY ISOLATED TARGETS

MeV low-Z ions are expected to find application in starting ignition in high gain ICF targets. Quite stringent conditions in terms of power density and total energy are required to start fast ignition in a pre-compressed fuel by light-ion beams, this setting corresponding constraints on the design of adequate sources. In this paper are reported studies performed at ENEA (theory and experiments) on an ion source possibly suitable for fast ignition or entropy injection.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development and testing of a fast Fourier transform high dynamic-range spectral diagnostics for millimeter wave characterization

A fast Fourier transform (FFT) based wide range millimeter wave diagnostics for spectral characterization of scattered millimeter waves in plasmas has been successfully brought into operation. The scattered millimeter waves are heterodyne downconverted and directly digitized using a fast analog-digital converter and a compact peripheral component interconnect computer. Frequency spectra are obtained by FFT in the time domain of the intermediate frequency signal. The scattered millimeter waves are generated during high power electron cyclotron resonance heating experiments on the TEXTOR tokamak and demonstrate the performance of the diagnostics and, in particular, the usability of direct digitizing and Fourier transformation of millimeter wave signals. The diagnostics is able to acquire 4 GHz wide spectra of signals in the range of 136-140 GHz. The rate of spectra is tunable and has been tested between 200 000 spectra/s with a frequency resolution of 100 MHz and 120 spectra/s with a frequency resolution of 25 kHz. The respective dynamic ranges are 52 and 88 dB. Major benefits of the new diagnostics are a tunable time and frequency resolution due to postdetection, near-real time processing of the acquired data. This diagnostics has a wider application in astrophysics, earth observation, plasma physics, and molecular spectroscopy for the detection and analysis of millimeter wave radiation, providing high-resolution spectra at high temporal resolution and large dynamic range.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Modeling fast-ion transport during toroidal Alfven eigenmode avalanches in National Spherical Torus Experiment

Experiments on the National Spherical Torus Experiment [M. Ono et al., Nucl. Fusion 40, 557 (2000)] found strong bursts of toroidal Alfven eigenmode (TAE) activity correlated with abrupt drops in the neutron rate. A fairly complete data set offers the opportunity to benchmark the NOVA[C. Z. Cheng, Phys. Rep. 211, 1 (1992)] and ORBIT[R. B. White and M. S. Chance, Phys. Fluids 27, 2455 (1984)] codes in the low aspect ratio tokamak (ST) geometry. The internal structure of TAE was modeled with NOVA and good agreement is found with measurements made with an array of five fixed-frequency reflectometers. The fast-ion transport resulting from these bursts of multiple TAE was then modeled with the ORBIT code. The simulations are reasonably consistent with the observed drop in neutron rate, however, further refinements in both the simulation of the TAE structure and in the modeling of the fast-ion transport are needed. Benchmarking stability codes against present experiments is an important step in developing the predictive capability needed to plan future experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fast scanning probe for the NSTX spherical tokamak

We describe a fast reciprocating Langmuir probe and drive system, which has four main new features: (1) use of high-temperature, vacuum, circuit boards instead of cables to reduce weight and increase to 21 the number of possible connections, (2) rotatable and removable shaft, (3) 10 tip construction with designed hardware bandwidth up to 10 MHz, and (4) a detachable and modular tip assembly for easy maintenance. The probe is mounted in a fast pneumatic drive capable of speeds {approx}7 m/s and {approx}20g's acceleration in order to reach the scrape-off layer (SOL) and pedestal regions and remain inserted long enough to obtain good statistics while minimizing the heat deposition to the tips and head in a power density environment of 1-10 MW/m{sup 2}. The National Spherical Torus Experiment SOL features electron temperature, T{sub e}{approx}10-30 eV, and electron density, n{sub e}{approx}0.1-5x10{sup 12} cm{sup -3} while the pedestal features n{sub e}{approx}0.5-1.5x10{sup 13} cm{sup -3} and T{sub e}{approx}30-150 eV. The probe described here has ten tips which obtain a wide spectrum of plasma parameters: electron temperature profile T{sub e}(r), electron density profile n{sub e}(r) and Mach number profile M(r), floating potential V{sub f}(r), poloidal and radial electric field profiles E{sub {theta}}(r) and E{sub {rho}}(r), saturation current profile I{sub sat}(r), and their fluctuations up to 3 MHz. We describe the probe and show representative radial profiles of various parameters.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Recent Fast Wave Coupling and Heating Studies on NSTX, with Possible Implications for ITER

The goal of the high harmonic fast wave (HHFW) research on NSTX is to maximize the coupling of RF power to the core of the plasma by minimizing the coupling of RF power to edge loss processes. HHFW core plasma heating efficiency in helium and deuterium L-mode discharges is found to improve markedly on NSTX when the density 2 cm in front of the antenna is reduced below that for the onset of perpendicular wave propagation (n{sub onset}{proportional_to}B*k{sub parallel}{sup 2}/{omega}). In NSTX, the observed RF power losses in the plasma edge are driven in the vicinity of the antenna as opposed to resulting from multi-pass edge damping. PDI surface losses through ion-electron collisions are estimated to be significant. Recent spectroscopic measurements suggest that additional PDI losses could be caused by the loss of energetic edge ions on direct loss orbits and perhaps result in the observed clamping of the edge rotation. Initial deuterium H-mode heating studies reveal that core heating is degraded at lower k{sub {phi}}(-8 m{sup -1} relative to 13 m{sup -1}) as for the L-mode case at elevated edge density. Fast visible camera images clearly indicate that a major edge loss process is occurring from the plasma scrape off layer (SOL) in the vicinity of the antenna and along the magnetic field lines to the lower outer divertor plate. Large type I ELMs, which are observed at both k{sub {phi}} values, appear after antenna arcs caused by precursor blobs, low level ELMs, or dust. For large ELMs without arcs, the source reflection coefficients rise on a 0.1 ms time scale, which indicates that the time derivative of the reflection coefficient can be used to discriminate between arcs and ELMs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Recent Improvements in Fast Wave Heating in NSTX

Recent improvements in high-harmonic fast wave (HHFW) core heating in NSTX are attributed to using lithium conditioning, and other wall conditioning techniques, to move the onset density for perpendicular fast wave propagation further from the antenna. This has resulted in the first observation of HHFW core electron heating in deuterium plasma at a launched toroidal wavenumber, k{phi} = -3 m{sup -1}, NSTX record core electron temperatures of 5 keV in helium and deuterium discharges and, for the first time, significant HHFW core electron heating of deuterium neutral-beam-fuelled H-mode plasmas. Also, k{phi} = -8 m{sup -1} heating of the plasma startup and plasma current ramp-up has resulted in significant core electron heating, even at central electron densities as low as {approx}4x10{sup 18} m-3.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurement of Fast Electron Transport by Lower Hybrid Modulation Experiments in Alcator C-Mod

The Lower Hybrid Current Drive (LHCD) system on Alcator C-Mod can produce spectra with a wide range of peak parallel refractive index (n{sub parallel}). An experiment in which LH power is square-wave modulated on a time scale much faster than the current relaxation time does not significantly alter the poloidal magnetic field inside the plasma and thus allows for realistic modeling and consistent plasma conditions for different ny spectra. Boxcar binning of hard x-rays during LH power modulation allows for time resolution sufficient to resolve the build-up, steady-state, and slowing-down of fast electrons. A transport model built in Matlab has been used to determine a fast electron pinch velocity for a high-n{sub parallel} case of 1-2 m/s.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗