Search NASA⌕ Search

SEARCH · Search NASA

Results for “Flight Operations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Novus: An Unmanned Aerial System and Virtual Reality Flight Deck for Data Collection and Visualization

Many emerging technologies offer tremendous new capabilities that will, without question, redefine how we interact with, utilize, understand, and optimize the energy systems around us. Drones offer a new ability to remotely capture data in ways that have previously been impractical. However, their flight control systems remain rudimentary and limit the ability of researchers to fully take advantage of these platforms as remote sensing devices. In this project, we constructed a hexarotor drone and outfitted it with advanced (yet inexpensive) sensors as well as a telemetry data management and control package. We then created a virtual reality flight deck that allows a drone operator to define waypoints "on-the-fly" or take manual control over flight operations. The flight deck provides a live on-board video stream display, a 3-dimensional topographic map with the drone’s position in space overlaid onto it, as well as a data visualization framework that keeps critical information immediately available to the operator. These advances provide a new platform for scientific data collection such as thermography of building envelopes or solar arrays. As the drone is in flight and data are being collected, these data are relayed to the virtual reality environment where they can be inspected for integrity and the flight plan altered if necessary to collect higher quality data. Future work will focus on implementing 3-dimensional mapping using both visible and thermal imagery collected from the drone, and streaming those into the virtual reality flight deck in real time.

Source record↗

The View From the Flight Deck: Pilot Perspectives on Fatigue in Short-Haul Operations

INTRODUCTION: There are few studies investigating the impact of fatigue in short-haul flight operations conducted under United States (US) Federal Aviation Regulations (FAR) Part 117 flight and duty limitations and rest requirements. In order to understand the fatigue factors unique to short-haul operations, we conducted a series of focus groups across four major commercial passenger airlines in the US. The outcomes of this study were intended to inform the scope of a larger study of fatigue in short-haul operations. METHODS: Ninety short-haul pilots were recruited through emails distributed by airline safety teams and labor representatives. Fourteen focus groups were conducted via an online conferencing platform in which participants were asked to identify, specific to short-haul: a) schedules and operations that lead to elevated fatigue; b) schedules and operations that are not fatiguing, and c) important fatigue factors to study. Data were collected anonymously and coded using conventional qualitative content analysis, with axial coding and summative analysis used to identify main themes and over-arching categories. RESULTS: Participants had an average of 12,348 (6,483) lifetime flying hours with 71 (14.5) hours of monthly flying. Forty-six percent of participants were captains. The six fatigue factor categories identified were: circadian disruption (e.g., circadian switches, redeyes), high workload (e.g., hassle factors, number of flights per duty), inadequate rest opportunity (e.g., minimum rest layovers, quality of rest facilities), schedule changes (e.g., unpredictability), regulation and policy issues (e.g., scheduling up to FAR 117 limits), and long sits (e.g., long wait times between flights). DISCUSSION: A field study informed by these results and designed to investigate the prevalence and impact of these factors in US short-haul operations is currently underway.

aviation↗

Advanced transport operating system software upgrade: Flight management/flight controls software description

The Flight Management/Flight Controls (FM/FC) software for the Norden 2 (PDP-11/70M) computer installed on the NASA 737 aircraft is described. The software computes the navigation position estimates, guidance commands, those commands to be issued to the control surfaces to direct the aircraft in flight based on the modes selected on the Advanced Guidance Control System (AGSC) mode panel, and the flight path selected via the Navigation Control/Display Unit (NCDU).

Clinedinst, Winston C.↗

Operational efficiency: Automatic ascent flight design

Major objectives, milestones, key contacts, major accomplishments, technology issues, and candidate programs of the automatic ascent flight design are outlined. Topics discussed include: advanced avionics concepts; advanced training concepts; telerobotics/telepresence; integrated command and control; advanced software integration; atmospheric adaptive guidance; and health status and monitoring concept. This presentation is represented by viewgraphs only.

Source record↗

Propulsion System for Very High Altitude Subsonic Unmanned Aircraft

This paper explains why a spark ignited gasoline engine, intake pressurized with three cascaded stages of turbocharging, was selected to power NASA's contemplated next generation of high altitude atmospheric science aircraft. Beginning with the most urgent science needs (the atmospheric sampling mission) and tracing through the mission requirements which dictate the unique flight regime in which this aircraft has to operate (subsonic flight at greater then 80 kft) we briefly explore the physical problems and constraints, the available technology options and the cost drivers associated with developing a viable propulsion system for this highly specialized aircraft. The paper presents the two available options (the turbojet and the turbocharged spark ignited engine) which are discussed and compared in the context of the flight regime. We then show how the unique nature of the sampling mission, coupled with the economic considerations pursuant to aero engine development, point to the spark ignited engine as the only cost effective solution available. Surprisingly, this solution compares favorably with the turbojet in the flight regime of interest. Finally, some remarks are made about NASA's present state of development, and future plans to flight demonstrate the three stage turbocharged powerplant.

Bents, David J.↗

Designing Spacecraft and Mission Operations Plans to Meet Flight Crew Radiation Dose Requirements: Why is this an "Epic Challenge" for Long-Term Manned Interplanetary Flight

Outline of presentation: (1) Radiation Shielding Concepts and Performance - Galactic Cosmic Rays (GCRs) (1a) Some general considerations (1b) Galactic Cosmic Rays (2)GCR Shielding I: What material should I use and how much do I need? (2a) GCR shielding materials design and verification (2b) Spacecraft materials point dose cosmic ray shielding performance - hydrogen content and atomic number (2c) Accelerator point dose materials testing (2d) Material ranking and selection guidelines (2e) Development directions and return on investment (point dose metric) (2f) Secondary particle showers in the human body (2f-1) limited return of investment for low-Z, high-hydrogen content materials (3) GCR shielding II: How much will it cost? (3a) Spacecraft design and verification for mission radiation dose to the crew (3b) Habitat volume, shielding areal density, total weight, and launch cost for two habitat volumes (3c) It's All about the Money - Historical NASA budgets and budget limits (4) So, what can I do about all this? (4a) Program Design Architecture Trade Space (4b) The Vehicle Design Trade Space (4c) Some Near Term Recommendations

Koontz, Steven↗

Preliminary flight tests of an oculometer

A remote sensing oculometer has been successfully operated during flight tests. This device was able to track the pilot's eye-point-of-regard (lookpoint) consistently and unobtrusively in the flight environment. The instantaneous position of the lookpoint was determined to within approximately 1 degree. Data were recorded on both analog and video tape. The video data consisted of continuous scenes of the aircraft's instrument display and a superimposed white dot (simulating the lookpoint) dwelling or moving from instrument to instrument as the pilot monitored the display information during landing approaches.

Middleton, D. B.↗

Models of Human Information Requirements: "When Reasonable Aiding Systems Disagree"

Aircraft flight management and Air Traffic Control (ATC) automation are under development to maximize the economy of flight and to increase the capacity of the terminal area airspace while maintaining levels of flight safety equal to or better than current system performance. These goals are being realized by the introduction of flight management automation aiding and operations support systems on the flight deck and by new developments of ATC aiding systems that seek to optimize scheduling of aircraft while potentially reducing required separation and accounting for weather and wake vortex turbulence. Aiding systems on both the flight deck and the ground operate through algorithmic functions on models of the aircraft and of the airspace. These models may differ from each other as a result of variations in their models of the immediate environment. The resultant flight operations or ATC commands may differ in their response requirements (e.g. different preferred descent speeds or descent initiation points). The human operators in the system must then interact with the automation to reconcile differences and resolve conflicts. We have developed a model of human performance including cognitive functions (decision-making, rule-based reasoning, procedural interruption recovery and forgetting) that supports analysis of the information requirements for resolution of flight aiding and ATC conflicts. The model represents multiple individuals in the flight crew and in ATC. The model is supported in simulation on a Silicon Graphics' workstation using Allegro Lisp. Design guidelines for aviation automation aiding systems have been developed using the model's specification of information and team procedural requirements. Empirical data on flight deck operations from full-mission flight simulation are provided to support the model's predictions. The paper describes the model, its development and implementation, the simulation test of the model predictions, and the empirical validation process. The model and its supporting data provide a generalizable tool that is being expanded to include air/ground compatibility and ATC crew interactions in air traffic management.

Corker, Kevin↗