Search NASA⌕ Search

SEARCH · Search NASA

Results for “Material microstructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Chapter 15: Summary and Outlook

In the various chapters of this book, numerous characterization techniques are presented that can be applied to thin-film solar cells to determine (micro)structural, compositional, electrical, and optoelectronic properties. What has yet to be more fully elucidated is to what extent these characterization techniques can be combined, in a correlative way, to enhance the information gathered on materials and devices. Indeed, it is valuable to consider combining techniques to verify the relevance of the measured materials properties or to obtain them on different length scales-to compare surface with bulk properties, or to correlate structure and composition of materials with electrical and optoelectronic properties.

41 EE - Solar Energy Technologies Office (EE-4S)↗

Dielectric and nonlinear electrical behaviors of La-doped CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics

We prepared La doped of CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics by a solid-state sintering process and observed nonlinear electrical varistor and high dielectric behaviors. Phase composition analyses show that the La can substitute on the Ca sites completely, and have no influence on the phase composition. The impedance spectroscopy at room temperature indicates that the La doping can maintain the dielectric permittivity of CaCu{sub 3}Ti{sub 4}O{sub 12} (approx10{sup 4}). The relationships between electrical current density versus applied electrical field show that these ceramic samples exhibit nonlinear varistor characteristics, which should be ascribed to the existing potential barrier height at the grain boundary.

36 MATERIALS SCIENCE↗

Femtosecond X-ray Diffraction: Applications for Laser-Irradiated Materials

Over the past few years short pulse x-ray diffraction at the nanosecond and picosecond level has become an established technique in many high-power laser laboratories for interrogating the lattice response of laser-perturbed and shocked matter, and is now finding applications in diagnosing the state of crystalline materials subject to quasi-isentropic compression. We review some of the previous results obtained in this area, for example the direct observation of coherent phonons, the first direct confirmation of the alpha-epsilon transition in shocked iron, and recent measurements indicating that the strength of matter can be measured at shock pressures exceeding a Mbar. The majority of sources used to date have been laser-plasma based, with some work being performed using 3{sup rd} generation synchrotron sources. However, the development of 4{sup th} generation x-ray free-electron lasers, such as LCLS, afford many new opportunities, with pulse lengths in the femtosecond regime. The extremely low divergence and monochromatic nature of the LCLS beam make it well suited to study compressed polycrystalline matter, especially samples with small grain sizes. At extremely short pulse lengths, such that the pulse is shorter than an x-ray extinction depth traversal time, the diffraction process itself becomes time-dependent, and in certain cases the full wave-field solution will be required, particularly if the matter itself is being rapidly perturbed, as will occur if the intense x-ray radiation is used to create warm dense matter, as in recent experiments on FLASH at DESY.

36 MATERIALS SCIENCE↗

CODING METHODS FOR USE WITH LOW POWER LASER GENERATED ULTRASOUND

We describe how the application of maximum-length sequence (m-sequence) coding can be used to improve the measured signal-to-noise ratio of ultrasonic waves generated by a low power laser diode. Lamb waves were generated in thin metallic plates using a pulsed excitation. To improve the signal-to-noise ratio of the detected signal, various signal processing methods have been evaluated, with m-sequences described here. We also show how the spectral content of the ultrasonic wave can be controlled by using a modified m-sequence approach.

36 MATERIALS SCIENCE↗

INNOVATIVE EDDY CURRENT PROBE FOR MICRO DEFECTS

This paper reports the development of an innovative eddy current (EC) probe, and its application to micro-defects on the root of the Friction Stir Welding (FSW). The new EC probe presents innovative concept issues, allowing 3D induced current in the material, and a lift-off independence. Validation experiments were performed on aluminium alloys processed by FSW. The results clearly show that the new EC probe is able to detect and sizing surface defects about 60 microns depth.

36 MATERIALS SCIENCE↗

NONDESTRUCTIVE EVALUATION OF HYBRID BEARING CERAMIC ROLLERS USING PROCESS COMPENSATED RESONANT TESTING (PCRT)

We have used Process Compensated Resonant Testing (PCRT) for studying structural integrity and functional performance of ceramic balls used in various auxiliary power units (APUs), propulsion engines, and defense and space missiles. The results show that PCRT is successful in sorting acceptable parts from parts with defects such as micro-structural changes, C-cracks, and scuffs. However, PCRT suffers from limitations, generally not determining the type, size or location of the anomaly. The pursuit of improvements to PCRT is an on-going process.

36 MATERIALS SCIENCE↗

Grain Refinement of a gamma-TiAl Alloy Through Isothermal Forging and Heat Treatment

Effect of initial massive type structure of a gamma-TiAl based alloy on its hot deformed and stabilized microstructure was investigated. A gamma alloy with composition of Ti-47Al-12Nb-0.5Si was subjected to rapid quenching from alpha phase field. The quenched sample was deformed at high temperature. Further post deformation heat treatment was conducted to stabilize the as-deformed structure. It was shown that Nb and Si have important roles in grain refinement of the final product. Presence of niobium in the alloy made the diffusion controlled eutectoid reaction sluggish and assisted the formation of massive type gamma phase (gamma{sub m}) by rapid cooling from alpha phase field. Silicon addition assisted the microstructural refinement by forming hard and finely dispersed titanium silicide particles. These particles act as preferred sites for dynamic recrystallization during hot deformation. Massive gamma phase tends to deform uniformly and decompose to equilibrium phases after final heat treatment and results in a very fine grained microstructure.

36 MATERIALS SCIENCE↗

Transport and charging mechanisms in Ta{sub 2}O{sub 5} thin films for capacitive RF MEMS switches application

The potential of sputtered Ta{sub 2}O{sub 5} thin films to be used as dielectric layers in capacitive radio frequency microelectromechanical system switches is evaluated by investigating two factors of crucial importance for the performance of these devices which are the transport mechanisms and the charging effects in the dielectric layer. We find that Ta{sub 2}O{sub 5} films show good electrical and dielectrical properties for the considered application in terms of a low leakage current density of 4 nA/cm{sup 2} for E=1 MV/cm, a high breakdown field of 4 MV/cm and a high dielectric constant of 32. For electric fields lower than 1 MV/cm the conduction mechanism is found to be variable-range hopping in the temperature range 300-400 K, while nearest-neighbor hopping is observed at higher temperatures. For fields in the range 1-4 MV/cm Poole-Frenkel becomes the dominant conduction mechanism. Current and capacitance transients used to investigate the charging effects show a decay which is well described by the stretched-exponential law, thus providing further insights on capture and emission processes.

36 MATERIALS SCIENCE↗

Influence of Zr doping on the structure and ferroelectric properties of BiFeO{sub 3} thin films

We have prepared thin films of BiFe{sub 1-x}Zr{sub x}O{sub 3}(x=0.0-0.15) by chemical solution deposition on Pt/Si substrates. Structural characterization of the films using x-ray diffraction and Raman spectroscopy suggests lattice distortion upon doping for x<0.15. This also appears to be the limit for pure phase formation. Ferroelectric measurements reveal that Zr doping leads to reduction in the remnant polarization and an increase in the coercive field, attributed to lattice distortion. Dielectric measurements indicate that the doped compositions exhibit absence of low frequency relaxation, usually associated with defects and grain boundaries. Absence of Fe{sup 2+} in our films was verified using x-ray photoelectron spectroscopy. Role of Zr in controlling the film's properties has been explained in terms of changes in the bond strength.

36 MATERIALS SCIENCE↗

The Prediction and Simulation for the Mechanical Properties of Ceramic-Based Composites Reinforced with Nano-Micro Particles

The global-local homogenization method with precise period boundary conditions is applied to predict and simulate the mechanical properties of ceramic composites reinforced by spherical nano-micro particles with enwrapping and nesting arrays. The numerical simulation is performed with different size ratios of nano-micro particles, and different configurations for representative volume element. The results show that the low radius ratios of nano-micro particles produce a larger effective Young's modulus for its more uniform dispersion, and the hexagon RVE with nesting array can make an overestimation for effective elastic modulus of ceramic composites, and the interfacial damage between nano-microscopic particles and matrix degenerates the effective elastic modulus. It shows in this paper that it is significant to improve the mechanical properties of ceramic materials by mixing some nano- and micro-particles into the matrix with good designed array methods from the viewpoints of nano-microscopic crystal structure, and a rational interfacial damage model should be further proposed to investigate the toughening mechanism of ceramic-composites reinforced with nano-micro particles.

36 MATERIALS SCIENCE↗

Dielectric and ferroelectric response of compositionally graded bilayer and trilayer composites of BaTiO{sub 3} and 0.975BaTiO{sub 3}-0.025Ba(Cu{sub 1/3}Nb{sub 2/3})O{sub 3}

In this paper, we report the dielectric and ferroelectric response of compositionally graded bilayer and trilayer composites consisting of BaTiO{sub 3} (BT) and 0.975BaTiO{sub 3}-0.025Ba(Cu{sub 1/3}Nb{sub 2/3})O{sub 3} (BTBCN). Two types of graded bilayer samples were synthesized, one with same thickness of BT and BTBCN while other with different layer thicknesses. The graded trilayer sample consisted of BT layer sandwiched between two BTBCN layers of equal thickness. Scanning electron microscopy and transmission electron microscopy images showed a sharp interface with needle-shape domains across the interface. The domain size on BT side was found to be larger than that on BTBCN side. The temperature dependence of dielectric response for all composite systems was found to exhibit shifting in characteristic Curie peak compared to constituent material which was associated to coupling between layers. Moreover, the differences in grain size, tetragonality, domain mobility of each layer was found to perturb the electrical response of composite. The polarization mismatch between uncoupled BT and BTBCN established internal electric field in composite specimen and defined new polarization states in each layer by perturbing free energy functional of the composite specimen. Dynamic hysteresis behaviors and power-law scaling relations of all specimens were determined from polarization-electric field hysteresis loop measurements as a function of frequency. All systems were found to exhibit similar dynamic scaling relationships. Hysteresis area <A>, P{sub r}, and E{sub C} decreased with increasing frequency due to delayed response but increased with increasing applied electric field due to enhancement of driving force. Trilayer system was found to exhibit strong internal-bias field and double hysteresis behavior. The coupling effect resulting due to polarization mismatch between layers had substantial influence on the dynamic hysteresis behavior and power-law scaling relations.

36 MATERIALS SCIENCE↗

Thin film colossal dielectric constant oxide La{sub 2-x}Sr{sub x}NiO{sub 4}: Synthesis, dielectric relaxation measurements, and electrode effects

We have successfully synthesized the colossal dielectric constant oxide La{sub 2-x}Sr{sub x}NiO{sub 4} in thin film form by reactive cosputtering from metallic targets and careful annealing protocols. Composition and phase purity was determined through energy dispersive spectra and x-ray diffraction, respectively. The dielectric constant exceeds values of over 20 000 up to 1 kHz and the activation energy for the frequency-independent conductivity plateau was extracted to be approximately 155 meV from 300 to 473 K, both in agreement with measurements conducted on bulk single crystals. However, unlike in single crystals, we observe early onset of relaxation in thin films indicating the crucial role of grain boundaries in influencing the dielectric response. ac conductivity at varying temperatures is analyzed within the framework of the universal dielectric law leading to an exponent of approximately 0.3, dependent on the electrode material. Impedance spectroscopy with electrodes of different work function (Pt, Pd, and Ag) was further carried out as a function of temperature and applied bias to provide mechanistic insights into the nature of the dielectric response.

36 MATERIALS SCIENCE↗

Effects Of Thermal Exchange On Material Flow During Steel Thixoextrusion Process

Semisolid processing is an innovative technology for near net-shape production of components, where the metallic alloys are processed in the semisolid state. Taking advantage of the thixotropic behavior of alloys in the semisolid state, significant progress has been made in semisolid processing. However, the consequences of such behavior on the flow during thixoforming are still not completely understood. To explore and better understand the influence of the different parameters on material flow during thixoextrusion process, thixoextrusion experiments were performed using the low carbon steel C38. The billet was partially melted at high solid fraction. Effects of various process parameters including the initial billet temperature, the temperature of die, the punch speed during process and the presence of a Ceraspray layer at the interface of tool and billet were investigated through experiments and simulation. After analyzing the results thus obtained, it was identified that the aforementioned parameters mainly affect thermal exchanges between die and part. The Ceraspray layer not only plays a lubricant role, but also acts as a thermal barrier at the interface of tool and billet. Furthermore, the thermal effects can affect the material flow which is composed of various distinct zones.

36 MATERIALS SCIENCE↗

Magnetic properties of Fe{sub 62}Co{sub 19}Ga{sub 19} films deposited on Si(100) substrates

Fe{sub 81-X}Co{sub X}Ga{sub 19} films, with x = 0-23 atom % Co, were deposited on Si(100) substrates, respectively, by the dc magnetron sputtering method. Film thickness (t{sub f}) ranged from 30 to 400 nm. We have done the following experiments on those films: saturation magnetostriction ({lambda}{sub S}), high-temperature magnetic hysteresis, x-ray diffraction (XRD), atomic force microscopy, Auger-depth profile analysis, and plane-view and/or cross-section transmission electron microscopy. Our main finding is that if x increases from 0 to 19 atom % Co, {lambda}{sub S} increases from 56 to 152 ppm, and if x continues to increase from 19 to 23 atom % Co, {lambda}{sub S} decreases. These results indicate that the addition of Co in the Fe{sub 81}Ga{sub 19} alloy is advantageous in enhancing {lambda}{sub S}, if x is the correct value. From XRD, the Fe{sub 62}Co{sub 19}Ga{sub 19}/Si(100) film comprises the A2 and B2 phases. The mechanism for large enhancement of {lambda}{sub S} in Fe{sub 62}Co{sub 19}Ga{sub 19}/Si(100) is related to an intrinsic origin. The t{sub f} dependence of {lambda}{sub S} for the Fe{sub 62}Co{sub 19}Ga{sub 19} films is that: [1] in the range of 110 {<=} t{sub f} {<=} 400 nm, {lambda}{sub S} increases as t{sub f} decreases; [2] in the range of 30 {<=} t{sub f} {<=} 110 nm, {lambda}{sub S} decreases as t{sub f} continues to decrease. The {lambda}{sub S} behavior in the regions [1] and [2] is explained based on the modified Neel model. Other physical properties of the Fe{sub 62}Co{sub 19}Ga{sub 19} films include the following: saturation magnetization 4{pi}M{sub S} = 1.8 - 2.0 T, coercivity H{sub C} = 35 - 64 Oe, Curie temperature T{sub C} = 597 deg. C, planar (mean) grain size D{sub P} = 29.6 nm, and columnar grain size D{sub L} {approx_equal} t{sub f}.

36 MATERIALS SCIENCE↗

Electrical Properties of Barium and Zirconium Modified NBT Ferroelectric Ceramics

Recently a new wave of interest has risen on relaxor ferroelectrics with complex perovskite structure due to their wide use in fabrication of multilayer ceramic capacitors, electrostrictive actuators, and electromechanical transducers. The polycrystalline 0.93(Bi{sub 0.5}Na{sub 0.5})Ba{sub 0.07}Z{sub 0.04}T{sub 0.96}O{sub 3}(0.07BNBZT) ceramic material, which is in the vicinity of the morphotropic phase boundary (MPB) has been prepared by using high temperature solid state reaction method. The tolerance factor has been estimated and found to be 0.815. XRD analysis revealed a rhombohedral perovskite type structure. SEM micrographs showed highly dense grains with rectangular shape. The average grain size is found to be 1.51{mu}m. Dielectric studies in the material ha indicated relaxor behaviour with diffuse phase transition. High value of {epsilon}{sub m}>1958 is found at 1kHz, Tm (phase transition temperature) 335 deg. C, The diffuseness parameter was established to be 1.60 revealing the relaxor behaviour. Further, to confirm the relaxor behaviour in the material, Vogel-Fulcher (V-F) relation has been used. Estimated V-F parameters are found to be T{sub f} = 138 deg. C, E{sub a} = 0.080 eV and {nu}{sub o} = 2.32x10{sup 8} Hz. Cole-Cole analysis has shown a non-Debye type relaxation in the system. Conductivity studies in the material obeyed the Jonscher's power law in frequency range of (45Hz-5MHz) and temperature range of (35 deg. C - 600 deg. C). The electric conduction in the system may be due to hopping/mobility/ transportation of charge carriers.

36 MATERIALS SCIENCE↗

Gas gun shock experiments with single-pulse x-ray phase contrast imaging and diffraction at the Advanced Photon Source

The highly transient nature of shock loading and pronounced microstructure effects on dynamic materials response call for in situ, temporally and spatially resolved, x-ray-based diagnostics. Third-generation synchrotron x-ray sources are advantageous for x-ray phase contrast imaging (PCI) and diffraction under dynamic loading, due to their high photon fluxes, high coherency, and high pulse repetition rates. The feasibility of bulk-scale gas gun shock experiments with dynamic x-ray PCI and diffraction measurements was investigated at the beamline 32ID-B of the Advanced Photon Source. The x-ray beam characteristics, experimental setup, x-ray diagnostics, and static and dynamic test results are described. We demonstrate ultrafast, multiframe, single-pulse PCI measurements with unprecedented temporal (<100 ps) and spatial ({approx}2 {mu}m) resolutions for bulk-scale shock experiments, as well as single-pulse dynamic Laue diffraction. The results not only substantiate the potential of synchrotron-based experiments for addressing a variety of shock physics problems, but also allow us to identify the technical challenges related to image detection, x-ray source, and dynamic loading.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Impacts of crystal orientation of GaAs on the interfacial structures and electrical properties of Hf{sub 0.6}La{sub 0.4}O{sub x} films

One of the major challenges in realizing the GaAs channel in the metal oxide semiconductor field effect transistor is the degrading in electron transport properties at the interface between GaAs and the gate oxide. In this study, Hf{sub 0.6}La{sub 0.4}O{sub x} gate oxide films were deposited at a low temperature (200 °C) on GaAs(111)A and GaAs(100) substrates by plasma enhanced atomic layer deposition. Microstructure analysis indicates that residuals of gallium oxide, arsenic oxide, and As element remained at the interface of Hf{sub 0.6}La{sub 0.4}O{sub x}/GaAs(100). On contrast, a smoother interface is observed between Hf{sub 0.6}La{sub 0.4}O{sub x} thin film and GaAs(111)A substrate. Furthermore, a reduction of interfacial layer is observed in Hf{sub 0.6}La{sub 0.4}O{sub x}/GaAs(111)A. Electrical characterization of the metal-insulator-semiconductor Pt/Hf{sub 0.6}La{sub 0.4}O{sub x}/n-GaAs(111)A capacitor indicated a reduction of D{sub it} and leakage current compared with the capacitor fabricated on GaAs(100)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multirate delivery of multiple therapeutic agents from metal-organic frameworks

The highly porous nature of metal-organic frameworks (MOFs) offers great potential for the delivery of therapeutic agents. Here, we show that highly porous metal-organic frameworks can be used to deliver multiple therapeutic agents—a biologically active gas, an antibiotic drug molecule, and an active metal ion—simultaneously but at different rates. The possibilities offered by delivery of multiple agents with different mechanisms of action and, in particular, variable timescales may allow new therapy approaches. Here, we show that the loaded MOFs are highly active against various strains of bacteria.

36 MATERIALS SCIENCE↗