Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nested”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Parallel solution of closely coupled systems

The odd-even permutation and associated unitary transformations for reordering the matrix coefficient A are employed as means of breaking the strong seriality which is characteristic of closely coupled systems. The nested dissection technique is also reviewed, and the equivalence between reordering A and dissecting its network is established. The effect of transforming A with odd-even permutation on its topology and the topology of its Cholesky factors is discussed. This leads to the construction of directed graphs showing the computational steps required for factoring A, their precedence relationships and their sequential and concurrent assignment to the available processors. Expressions for the speed-up and efficiency of using N processors in parallel relative to the sequential use of a single processor are derived from the directed graph. Similar expressions are also derived when the number of available processors is fewer than required.

Utku, S.↗

Cleopatra Patera on Venus - Venera 15/16 evidence for a volcanic origin

The nonconcentric nature, anomalous depth, and terraced morphology of the nested craters that compose Cleopatra Patera are more closely analogous to volcanic craters (calderas) than multiring impact structures. Associated deposits northeast and downslope of the Patera first recognized on Venera 15/16 radar images are interpreted as volcanic plains related to, and perhaps cogenetic with, Cleopatra. The plains lavas probably originated as effusions from a radial rift zone or ring fissures. Rim deposits surrounding Cleopatra are asymmetric along the structural fabric of the region, also indicating fissure-type eruptions. Finally, a volcanic origin not only is easily reconciled with the tectonic setting of the Patera, it is almost required by the correlation between the Patera and regional structural trend.

Schaber, Gerald G.↗

Two-phase flows and heat transfer within systems with ambient pressure above the thermodynamic critical pressure

In systems where the design inlet and outlet pressure P sub amb are maintained above the thermodynamic critical pressure P sub c, it is often assumed that heat and mass transfer are governed by single-phase relations and that two-phase flows cannot occur. This simple rule of thumb is adequate in many low-power designs but is inadequate for high-performance turbomachines, boilers, and other systems where two-phase regions can exist even though P sub amb P sub c. Heat and mass transfer and rotordynamic-fluid-mechanic restoring forces depend on momentum differences, and those for a two-phase zone can differ significantly from those for a single-phase zone. By using a laminar, variable-property bearing code and a rotating boiler code, pressure and temperature surfaces were determined that illustrate nesting of a two-phase region within a supercritical pressure region. The method of corresponding states is applied to bearings with reasonable rapport.

Hendricks, R. C.↗

Simultaneous structure/control optimization of large flexible spacecraft

This paper presents an approach to the simultaneous optimal design of a structure and control system for large flexible spacecrafts based on realistic objective function and constraints. The weight or total cost of structure and control system is minimized subject to constraints on the magnitude of response to a given disturbance involving both rigid-body and elastic modes. A nested optimization technique is developed to solve the combined problem. As an example, simple beam-like spacecraft under a steady-state white-noise disturbance force is investigated and some results of optimization are presented. In the numerical examples, the stiffness distribution, the location of controller and the control gains are optimized. Direct feedback control and linear quadratic optimal control laws are used with both inertial and non-inertial disturbing force. It is shown that the total cost is sensitive to the overall structural stiffness so that a simultaneous optimization of the structure and control system is indeed useful.

Onoda, Junjiro↗

Comparison of HCMM and GOES satellite temperatures and evaluation of surface statistics

Infrared data from GOES and HCMM satellites for areas in northern central and southern Florida were compared for February 1, 1979 to examine spatial variations of surface temperatures within GOES pixels using nested HCMM pixel surface temperatures. Standard deviations of HCMM pixel temperatures associated with mean temperature of a GOES pixel temperature during this period were found to be smallest for homogeneous water surfaces (about 0.5 K), to be slightly larger for homogeneous land surfaces (about 0.1 K), and to range up as high as 3.5 K for mixed water-land surfaces.

Chen, E.↗

A study of frontal dynamics with application to the Australian summertime 'cool change'

The dynamics of frontal evolution is examined in terms of the Australian summertime cool change using a two-dimensional numerical model. The model is synthesized from observational data on surface cold fronts obtained during the Australian Cold Fronts Research Program, and the model develops a quasi-steady surface cold front during the 24 hours of integration. The characteristics of this model are compared with those of a kinematic model; it is observed that the features of the two models correspond. The two-dimensional and kinematic models are also compared with a 24-hour prediction of the cold front of February 1983 using the three-dimensional nested-grid model of the Australian Numerical Meteorology Research Center, developed by Gauntlett et al. (1984). Good correlation between these models is detected.

Reeder, Michael J.↗

Design and development of conical X-ray imaging mirrors

The basic principles for the design of conical optics, and the development of an arc-minute quality conical mirror are described. Computer ray tracing data for over 100 conical mirror designs are analyzed in order to study the intrinsic capabilities of conical mirrors; the intrinsic spatial resolution and approximate filling factor are considered. The procedures for the fabrication of a conical mirror for the Broad-Band X-ray Telescope experiment to be flown on the Shuttle are examined. A f/10 conical mirror with 3.8 m focal length and a filling factor of about 60 percent, consisting of 18 nested reflector pairs has been developed. The difference between the intrinsic and measured half-power radii is investigated. Methods for improving the spatial resolution of conical mirrors are being researched. The advantages and disadvantages of conical mirrors are discussed. It is noted that conical mirrors are applicable for studies in which a broad bandpass, moderate spatial resolution, and a small number of mirrors are required.

Petre, R.↗

Magnetic field draping in the Comet Halley coma - Comparison of Vega observations with computer simulations

During the Vega-1 encounter with Comet Halley, the magnetometer observed draping and compression of the interplanetary magnetic field. These are reproduced well by a three-dimensional MHD simulation of the cometary interaction. Rotations in the magnetic field similar to those at closest approach are also observed 2.75 hours earlier. It is suggested that both rotations correspond to the same IMF interval and that the spacecraft had overtaken the plasma and encountered 'older' magnetic field as it penetrated the coma. Analysis of the MHD model indicates that it should take about 3 to 5 hours for a solar wind parcel to pass from the unperturbed solar wind to Vega-1 at closest approach. A simulated magnetic field profile composed of nested sections for different IMF orientations closely resembles the observations. This result supports the hypothesis of layered magnetic orientations in the coma.

Schwingenschuh, K.↗

An approach to structure/control simultaneous optimization for large flexible spacecraft

This paper presents an approach to the simultaneous optimal design of a structure and control system for large flexible spacecrafts based on realistic objective function and constraints. The weight or total cost of structure and control system is minimized subject to constraints on the magnitude of response to a given disturbance involving both rigid-body and elastic modes. A nested optimization technique is developed to solve the combined problem. As an example, simple beam-like spacecraft under a steady-state white-noise disturbance force is investigated and some results of optimization are presented. In the numerical examples, the stiffness distribution, location of controller, and control gains are optimized. Direct feedback control and linear quadratic optimal controls laws are used with both inertial and noninertial disturbing force. It is shown that the total cost is sensitive to the overall structural stiffness, so that simultaneous optimization of the structure and control system is indeed useful.

Onoda, Junjiro↗

Analysis Of Flow Across Cylinders

Report reviews various experimental, theoretical, and numerical methods of analysis of interactions between fluid and one or more cylinders across which it flows. Begins with discussion of mechanisms inducing vibrations in nests of cylinders. Major portion of review devoted to methods for numerical analysis of flow/cylinder interactions.

Kim, Sang-Wook↗

Detecting Faults In High-Voltage Transformers

Simple fixture quickly shows whether high-voltage transformer has excessive voids in dielectric materials and whether high-voltage lead wires too close to transformer case. Fixture is "go/no-go" indicator; corona appears if transformer contains such faults. Nests in wire mesh supported by cap of clear epoxy. If transformer has defects, blue glow of corona appears in mesh and is seen through cap.

Blow, Raymond K.↗

Clouds: A support architecture for fault tolerant, distributed systems

Clouds is a distributed operating system providing support for fault tolerance, location independence, reconfiguration, and transactions. The implementation paradigm uses objects and nested actions as building blocks. Subsystems and applications that can be supported by Clouds to further enhance the performance and utility of the system are also discussed.

Dasgupta, P.↗

Velocity-pressure integrated versus penalty finite element methods for high Reynolds number flows

Velocity-pressure integrated and consistent penalty finite element computations of high Reynolds number, laminar flows are presented. In both of the methods, the pressure has been interpolated using linear shape functions for a triangular element. The triangular element is contained inside the bi-quadratic isoparametric element. It has been reported previously that the pressure interpolation method, when used in the velocity-pressure integrated method, yielded accurate computational results for high Reynolds number flows. It is shown that use of the same pressure interpolation method in the consistent penalty finite element method yielded accurate velocity and pressure fields which were comparable to those obtained using the velocity-pressure integrated method. Accuracy of the two finite element methods has been demonstrated by comparing the computational results with available experimental data and/or fine-grid finite difference computational results. Advantages and disadvantages of the two methods are discussed on the basis of accuracy and convergence nature. Example problems considered include a lid-driven cavity flow for Reynolds number of 10,000, a laminar backward-facing step flow, a laminar flow through a nest of cylinders, and a channel flow with an internal blockage. A finite element computer program (NSFLOW/P) for the 2-D, incompressible Navier-Stokes equations is also presented.

Kim, Sang-Wook↗

Electroformed grazing incidence X-ray mirrors for a mirror array telescope

Grazing incidence Wolter type I mirrors for higher-energy X-rays have been replicated from two superpolished mandrels by electroforming. Single mirrors and a nested pair were tested with 1.5- and 6.4-keV X-rays, and their subminute of arc resolution and reflectivity close to the theoretical values are confirmed. The design of the mandrels, the mirror mounting scheme, and results of the X-ray test are presented. The microroughnesses of the mirrors measured using an optical profilometer were compared with the X-ray test results.

Ulmer, Melville P.↗

Fabrication of imaging X-ray optics

The design, fabrication, and performance of optics for X-ray astronomy and laboratory applications are described and illustrated with diagrams, drawings, graphs, photographs, and sample images. Particular attention is given to the Wolter I telescope developed for spectroscopic observation of 8-30-A cosmic X-ray sources from a rocketborne X-ray Objective Grating Spectrometer; this instrument employs three nested paraboloid-hyperboloid mirrors of 5083 Al alloy, figured by diamond turning and covered with a thin coating of acrylic lacquer prior to deposition of a 40-nm-thick layer of Sn. In calibration tests at NASA Marshall, the FWHM of the line-spread function at 1.33 nm was found to be 240 microns, corresponding to 21 arcsec. Also presented are the results of reflectivity measurements on C and W multilayers sputtered on Si and fusion glass substrates.

Catura, R. C.↗

Newton solution of inviscid and viscous problems

The application of Newton iteration to inviscid and viscous airfoil calculations is examined. Spatial discretization is performed using upwind differences with split fluxes. The system of linear equations which arises as a result of linearization in time is solved directly using either a banded matrix solver or a sparse matrix solver. In the latter case, the solver is used in conjunction with the nested dissection strategy, whose implementation for airfoil calculations is discussed. The boundary conditions are also implemented in a fully implicit manner, thus yielding quadratic convergence. Complexities such as the ordering of cell nodes and the use of a far field vortex to correct freestream for a lifting airfoil are addressed. Various methods to accelerate convergence and improve computational efficiency while using Newton iteration are discussed. Results are presented for inviscid, transonic nonlifting and lifting airfoils and also for laminar viscous cases.

Venkatakrishnan, V.↗

Covariance and the hierarchy of frame bundles

This is an essay on the general concept of covariance, and its connection with the structure of the nested set of higher frame bundles over a differentiable manifold. Examples of covariant geometric objects include not only linear tensor fields, densities and forms, but affinity fields, sectors and sector forms, higher order frame fields, etc., often having nonlinear transformation rules and Lie derivatives. The intrinsic, or invariant, sets of forms that arise on frame bundles satisfy the graded Cartan-Maurer structure equations of an infinite Lie algebra. Reduction of these gives invariant structure equations for Lie pseudogroups, and for G-structures of various orders. Some new results are introduced for prolongation of structure equations, and for treatment of Riemannian geometry with higher-order moving frames. The use of invariant form equations for nonlinear field physics is implicitly advocated.

Estabrook, Frank B.↗

Quantitative use of satellite SAR imagery of sea ice

An automatic technique to obtain ice motion based on maximizing cross-correlation and employing a strategy of nested calculations has been developed and used to obtain displacements of more than 2000 tie-points on a 2 km mesh grid. The mean displacement error is 250 m and is as low as manual data error of 150 m on rigid pieces. The method allows tie-points to be found on a regular grid in a fully automatic fashion. Full resolution data are not needed to maximize the accuracy of displacement measurements, a result which is significant for SAR images, with their large amounts of data.

Fily, M.↗