Search NASA⌕ Search

SEARCH · Search NASA

Results for “Operating experience data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

UH-60A Airloads Flight Test Program: Data Counter 8513

The data collection portion of the UH-60A Airloads Flight Test Program was conducted between July 1993 and February 1994. At the time, the UH-60A Airloads Program was the most comprehensive and data-rich rotorcraft flight test program that NASA and the U.S. Army had ever attempted. It was part of the Modern Technology Rotors Program, where several different rotors were tested in small- and full-scale wind tunnels combined with flight testing. The UH-60A portion of this program allowed for comparison between other tests performed and served as a scientific quality database for validating current and new computational and simulation models. The UH-60A flight test data was stored in a comprehensive, easily accessed database known as the Tilt Rotor Engineering Database System, or TRENDS. With over 30 years of rotor testing experience, NASA and the Army’s goal of the Airloads Flight Test Program was to collect data for a wide range of operating conditions and provide an extensive amount of data to improve the understanding of rotors and validate and improve prediction codes. This report presents the entire archived data set from Counter 8513 (Run 85, point 13) from the UH-60A Airloads Flight Test Program. There were 1,078 total data set counters acquired and archived during 57 accumulated flight hours and 31 research flights. Over 900 counters were research flight data acquisition data points. Counter 8513 is a low-speed, level-flight test condition.

Kufeld, Robert M.↗

Management, Analysis, and Visualization of Experimental and Observational Data -- The Convergence of Data and Computing

Scientific user facilities---particle accelerators, telescopes, colliders, supercomputers, light sources, sequencing facilities, and more---operated by the U.S. Department of Energy (DOE) Office of Science (SC) generate ever increasing volumes of data at unprecedented rates from experiments, observations, and simulations. At the same time there is a growing community of experimentalists that require real-time data analysis feedback, to enable them to steer their complex experimental instruments to optimized scientific outcomes and new discoveries. Recent efforts in DOE-SC have focused on articulating the data-centric challenges and opportunities facing these science communities. Key challenges include difficulties coping with data size, rate, and complexity in the context of both real-time and post-experiment data analysis and interpretation. Solutions will require algorithmic and mathematical advances, as well as hardware and software infrastructures that adequately support data-intensive scientific workloads. This paper presents the summary findings of a workshop held by DOE-SC in September 2015, convened to identify the major challenges and the research that is needed to meet those challenges.

Bethel, E. Wes↗

Bare, Complex, and Potassium-Filled HEU Oralloy Annuli Benchmark Experiments

Hundreds of critical experiments were constructed from Oak Ridge Alloy (oralloy) during the 1960s and 1970s at the Oak Ridge Critical Experiments Facility (ORCEF) in support of criticality safety operations at the Y-12 Plant. The purpose of these experiments included the evaluation of storage, casting, and handling limits and providing data for verification of calculation methods and cross sections for nuclear criticality safety applications. Recent contributions to the International Handbook of Evaluated Criticality Safety Benchmark Experiments (ICSBEP Handbook) include bare, complex, and potassium-filled annuli comprising multiple stacked units of highly enriched uranium (HEU), ~93.2 wt.% 235U, annuli, discs, and parallelepipeds. Prior contributions to the ICSBEP Handbook include bare (unreflected and unmoderated) cylinders; configurations of cylinders and annuli reflected with polyethylene, beryllium, or thin-graphite reflectors; GROTESQUE; and ORSphere. The newest contributions include a bare HEU 11-7 (11 inch outer diameter and 7 inch inner diameter) annulus capped at the top and bottom; bare HEU 13-7, 15-7, and 15-9 annuli; bare HEU complex annuli consisting of a 15-9 annulus containing either an off-center 7-inch-diameter cylinder, 5 × 5 inch parallelepiped, or split parallelepiped; and an HEU 13-7 annulus containing either empty stainless steel cans or potassium-metal-filled cans. The purpose of this latter pair of annulus configurations was to test the fast neutron cross sections of potassium as it was a candidate for coolant in some early space power reactor designs. A total of nine new configurations were evaluated as acceptable benchmark experiment measurements. Additional ORCEF oralloy experiments have also been identified for future benchmark evaluation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

TECHNOLOGY GOALS FOR A NEXT GENERATION RADIOXENON MONITORING SYSTEM

The Swedish Automated/Unattended Noble Gas Analyzer (SAUNA) is a nuclear explosion monitoring technology that was developed to provide continuous field measurement of radioxenon gas escaping from an underground nuclear detonation. This capability is a key to the verification of the Comprehensive nuclear Test Ban Treaty (CTBT). While the SAUNA technology has demonstrated success in the field, a decade of operation primarily in the International Noble Gas Experiment (INGE) has yielded areas for improvement in operations and verification. These opportunities include measurement sensitivity, sample throughput time, system uptime, and data availability. Increasing measurement sensitivity allows for finer discrimination between manmade radioxenon signals (from sources such as medical isotope production facilities) and radioxenon signals that result from fission in a nuclear weapon. Measurement sensitivity can be increased with techniques such as halving the sample processing time or increasing the quantity of xenon extracted from the atmosphere. Additionally, improvements in gas processing technology and control system software can improve the uptime and data availability. This paper will discuss the technical requirements as well as the system and operational specifications which we expect to be the groundwork for the next-generation of radioxenon monitoring systems.

Ely, James H.↗

Evaluating the Durability of Balance of Systems Components Using Combined-Accelerated Stress Testing

The degradation of photovoltaic (PV) balance of systems (BoS) components is not well-studied, but the consequences include: offline-modules, -strings, -inverters; system shutdown; arc-faults; and fires. A utility provider experienced a ~30% failure rate in their power transfer chain, attributed to branch connectors. Field-failed specimen assemblies were therefore examined, consisting of cable connector, branch connector and discrete fuse components. Unused field-vintage specimens are presently being examined using combined-accelerated stress testing (C-AST) to clarify the most influential environmental stressors as well as the effect of external mechanical perturbation. A benchtop prototype fixture was used to develop the perturbation capability for C-AST. The benchtop experiments were also used to develop the in-situ data acquisition of specimen: current, voltage, and temperature. A significant increase in operating temperature, ~100 deg C from ~40 deg C, and a different failure mode was observed immediately once periodic mechanical perturbation was applied. The current at failure was decreased from 35 A (with failure occurring in the fuses) to 15 A (failure at the male/female metal pin connection). After initial examination using X-ray computed tomography, the external plastic was machined away from failed specimens to allow failure analysis, including the extraction of the internal convolute springs for morphological examination (optical- and electron-microscopy). Chemical composition analysis included: energy-dispersive X-ray spectroscopy, differential scanning calorimetry, and Fourier transform infrared spectroscopy.

balance of systems↗

Evaluating the Durability of Balance of Systems Components Using Combined-Accelerated Stress Testing: Preprint

The degradation of photovoltaic (PV) balance of systems (BoS) components is not well-studied, but the consequences include: offline-modules, -strings, -inverters; system shutdown; arc-faults; and fires. A utility provider experienced a ~30% failure rate in their power transfer chain, originally attributed to branch connectors. Field-failed specimen assemblies were therefore examined, consisting of cable connector, branch connector, and discrete fuse components. Unused field-vintage specimens are presently being examined using combined-accelerated stress testing (C-AST) to clarify the most influential environmental stressors as well as the effect of external mechanical perturbation. A benchtop prototype fixture was used to develop the perturbation capability for the C-AST chamber. The benchtop experiments were also used to develop the in-situ data acquisition of specimen: current, voltage, and temperature. A significant increase in operating temperature, ~100 deg C from ~40 deg C, and a different failure mode was observed promptly once periodic mechanical perturbation was applied. The current at failure was decreased from 35 A (with failure in the fuses) to 15 A (failure at the male/female metal pin connection). After initial examination using X-ray computed tomography, the external plastic was machined away from failed specimens to allow failure analysis, including the extraction of the internal convolute springs for morphological examination (optical- and electron-microscopy).

balance of systems↗

Bare, complex, and potassium-filled HEU oralloy annuli Benchmark experiments - 14103

Hundreds of critical experiments were constructed from Oak Ridge Alloy (oralloy) during the 1960's and 1970's at the Oak Ridge Critical Experiments Facility (ORCEF) in support of criticality safety operations at the Y-12 Plant. The purpose of these experiments included the evaluation of storage, casting, and handling limits and providing data for verification of calculation methods and cross sections for nuclear criticality safety applications. Recent contributions to the International Handbook of Evaluated Criticality Safety Benchmark Experiments (ICSBEP Handbook) include bare, complex, and potassium-filled annuli comprising multiple stacked units of highly enriched uranium (HEU), ∼93.2 wt.% {sup 235}U, annuli, discs, and parallelepipeds. Prior contributions to the ICSBEP Handbook include bare (unreflected and unmoderated) cylinders; configurations of cylinders and annuli reflected with polyethylene, beryllium, or thin-graphite reflectors; GROTESQUE; and ORSphere. The newest contributions include a bare HEU 11-7 (11 inch outer diameter and 7 inch inner diameter) annulus oralloy-capped at the top and bottom; bare HEU 13-7, 15-7, and 15-9 annuli; bare HEU complex annuli consisting of a 15-9 annulus containing either an off-center 7-inch-diameter cylinder, 5 x 5 inch parallelepiped, or split parallelepiped; and an HEU 13-7 annulus containing either empty stainless steel cans or potassium-metal-filled cans. The purpose of this latter pair of annulus configurations was to test the fast neutron cross sections of potassium as it was a candidate for coolant in some early space power reactor designs. A total of nine new configurations were evaluated as acceptable benchmark experiment measurements. Additional ORCEF oralloy experiments have also been identified for future benchmark evaluation. (authors)

36 MATERIALS SCIENCE↗

Machine Learning on Heterogeneous, Edge, and Quantum Hardware for Particle Physics (ML-HEQUPP)

The next generation of particle physics experiments will face a new era of challenges in data acquisition, due to unprecedented data rates and volumes along with extreme environments and operational constraints. Harnessing this data for scientific discovery demands real-time inference and decision-making, intelligent data reduction, and efficient processing architectures beyond current capabilities. Crucial to the success of this experimental paradigm are several emerging technologies, such as artificial intelligence and machine learning (AI/ML) and silicon microelectronics, and the advent of quantum algorithms and processing. Their intersection includes areas of research such as low-power and low-latency devices for edge computing, heterogeneous accelerator systems, reconfigurable hardware, novel codesign and synthesis strategies, readout for cryogenic or high-radiation environments, and analog computing. This white paper presents a community-driven vision to identify and prioritize research and development opportunities in hardware-based ML systems and corresponding physics applications, contributing towards a successful transition to the new data frontier of fundamental science.

Gonski, Julia [SLAC]↗

Initial Closed Operation of the CELSS Test Facility Engineering Development Unit

As part of the NASA Controlled Ecological Life Support System (CELSS) Program, a CELSS Test Facility (CTF) is being planned for installation on the Space Station. The CTF will be used to provide data on the productivity and efficiency of a variety of CELSS higher plant crops grown sequentially from seed to harvest in the microgravity environment of the Space Station. Stringent environmental control will be maintained while fundamental crop productivity issues, such as carbon dioxide uptake and oxygen production rates, water transpiration rates, and biomass accumulation rates are obtained for comparison with ground-based data. In order to obtain an early realistic determination of the subsystem and system requirements necessary to provide the appropriate environmental conditions specified for CTF crop productivity experiments, an Engineering Development Unit (EDU) has been constructed and is undergoing initial operational testing at NASA Ames Research Center. The EDU is a ground-based testbed which will be used to characterize the integrated performance of major subsystem technologies, to evaluate hardware candidates and control strategies required for the CTF, and to further define the ability to meet CTF requirements within present Space Station constraints. This paper describes the initial closed operational testing of the EDU. Measured performance data are compared with the specified functional requirements and results from initial closed testing are presented. Plans for future science and technology testing are discussed.

Kliss, Mark↗

Report on Research in Experimental High Energy Physics

In the past three years the groups supported by the DOE have all made significant progress and posted major successes. The Minnesota CMS group has played leading roles in five data analyses and has had major roles in detector operations, the data management and the detector upgrades that are planned for for the LHC and those that are planned for the high-luminosity LHC. The CDMS-II experiment held the lead in WIMP sensitivity over the last decade, and is still the most sensitive detector in the world in the low WIMP mass region, with a recent 3σ hint of 8 GeV/c 2 WIMP candidates in the silicon data. SuperCDMS, with three orders of magnitude better electron recoil background rejection, has been collecting data since October 2011. Since all dark matter experiments require a better understanding of neutron backgrounds to make further advances in sensitivity, Cushman has expanded the Minnesota effort on backgrounds to the national level, where she is leading a coordinated effort in neutron simulations for underground physics. The work of Mandic on 100 mm detectors both for Super-CDMS and beyond has advanced rapidly. Also at the Intensity Frontier, the BESIII experiment has had a successful year of operation largely focused on searches for and studies of new "charmonium-like" states above DD threshold. At least one new state has been observed so far, with hints of others. An intensive effort to understand their nature and gain new insight into the strong interaction continues. BESIII has also produced a large number of other results in charmonium decay and light-hadronic physics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Iterative map-making with two-level preconditioning for polarized cosmic microwave background data sets: A worked example for ground-based experiments

Context. An estimation of the sky signal from streams of time ordered data (TOD) acquired by the cosmic microwave background (CMB) experiments is one of the most important steps in the context of CMB data analysis referred to as the map-making problem. The continuously growing CMB data sets render the CMB map-making problem progressively more challenging in terms of computational cost and memory in particular in the context of ground-based experiments with their operational limitations as well as the presence of contaminants. Aims. We study a recently proposed, novel class of the Preconditioned Conjugate Gradient (PCG) solvers which invoke two-level preconditioners in the context of the ground-based CMB experiments. We compare them against the PCG solvers commonly used in the map-making context considering their precision and time-to-solution. Methods. We compare these new methods on realistic, simulated data sets reflecting the characteristics of current and forthcoming CMB ground-based experiments. We develop a divide-and-conquer implementation of the approach where each processor performs a sequential map-making for a subset of the TOD. Results. We find that considering the map level residuals, the new class of solvers permits us to achieve a tolerance that is better than the standard approach by up to three orders of magnitude, where the residual level often saturates before convergence is reached. This often corresponds to an important improvement in the precision of the recovered power spectra in particular on the largest angular scales. The new method also typically requires fewer iterations to reach a required precision and therefore shorter run times are required for a single map-making solution. However, the construction of an appropriate two-level preconditioner can be as costly as a single standard map-making run. Nevertheless, if the same problem needs to be solved multiple times, for example, as in Monte Carlo simulations, this cost is incurred only once, and the method should be competitive, not only as far as its precision is concerned but also its performance.

79 ASTRONOMY AND ASTROPHYSICS↗

Fork Experiments in the Hot Cell Using Spent Fuel Rods for International Nuclear Safeguards

This work leveraged the rare availability of 25 full-length pressurized water reactor spent fuel rods and 1 irradiated mixed-oxide rod at an Oak Ridge National Laboratory hot cell. This was done to collect measurement data with two Fork detectors to assess the detectors’ capability of verifying operator declaration data and detecting partial defects in spent fuel, which are the two primary goals of international safeguards on spent nuclear fuel. The data can also be used to benchmark the ORIGEN module, which has been adopted in the International Atomic Energy Agency’s (IAEA’s)/European Atomic Energy Community’s (Euratom’s) Integrated Review and Analysis Program to predict the Fork detector count rates in real time. In this project, the authors first calibrated two Fork detectors—a standard one and a modified one—by using known strong neutron and gamma sources. Then, the authors measured all 26 fuel rods at multiple locations along the length. The fuel rods were then assembled into three arrays—2 × 2, 3 × 3, and 5 × 5—by using specially designed support grids to mimic fuel assemblies and measure the arrays with both detectors. For the 5 × 5 array, 4 and 8 fuel rods of the array were replaced in two separate cases with short stainless-steel rods to mimic two partial defect scenarios, and the arrays were measured before and after the replacements. Polyethylene blocks were used in this experiment to mimic water. The results show that the Fork detectors were able to verify operator declarations and detect partial defects in spent fuel, and the authors were the first to demonstrate this through experiments. A discovery was also made that determined the root cause of the nonlinear response to gamma dose in the ion chambers used in IAEA and Euratom’s Fork detectors. After the experiments, both detectors were retrieved from the hot cell for future use. The data collected in this project will be used in a parallel International Nuclear Safeguards Engagement Program (INSEP) project to enhance the safeguards in the Finnish spent fuel encapsulation plant, and the data will be useful to other projects in the future given the increased safeguards needs due to spent fuel transfer and disposal activities worldwide.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development, Implementation, and Testing of Fault Detection Strategies on the National Wind Technology Center's Controls Advanced Research Turbines

The National Renewable Energy Laboratory's National Wind Technology Center dedicates two 600 kW turbines for advanced control systems research. A fault detection system for both turbines has been developed, analyzed, and improved across years of experiments to protect the turbines as each new controller is tested. Analysis of field data and ongoing fault detection strategy improvements have resulted in a system of sensors, fault definitions, and detection strategies that have thus far been effective at protecting the turbines. In this paper, we document this fault detection system and provide field data illustrating its operation while detecting a range of failures. In some cases, we discuss the refinement process over time as fault detection strategies were improved. The purpose of this article is to share field experience obtained during the development and field testing of the existing fault detection system, and to offer a possible baseline for comparison with more advanced turbine fault detection controllers.

17 WIND ENERGY↗

Dynamic System Simulation of Fissile Solution Systems

Dynamic System Simulation (DSS) utilizes state-variables described by differential or difference equations to model system evolution. DSS techniques have been applied to develop a family of models to examine the time-dependent operational behavior of fissile solution systems. The base, or generic model, predicts the behavior of an aqueous homogeneous reactor (AHR), configured with a single cooling loop, operating at atmospheric pressure. A model specific for SUPO (Super Power), a uranium solution fueled AHR that operated at Los Alamos National Laboratory from 1951 to 1974, tailored from the generic model demonstrated close correlation with experimental data for steady-state operation1. SUPO is considered the benchmark for steady-state AHR operation. Subsequently specific models were tailored from the generic model for a variety of historical reactors including KEWB (Kinetics Experiments Water Boiler) “A-2” and “B-5” cores and Silene, which is considered the benchmark for AHR pulse operations. These models demonstrated DSS techniques could reliably be extended to different core geometries (SUPO and KEWB “A-2” were spherical; KEWB “B-5” and Silene cylindrical)2. This family of models also shows close correlation with experimental data in all modes of fissile solution system operation including pulse, free evolution, and steady-state. System response due to rate and amplitude of reactivity insertion closely matches experimental data. This report describes additional extensions of this family of models to include a wider design space for fissile solution systems. Pressurized cores, cooling schemes involving multiple cooling loops of various geometries, and accelerator-driven sub-critical system concepts are modeled.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Three-dimensional modeling of diesel engine intake flow, combustion and emissions

A three-dimensional computer code (KIVA) is being modified to include state-of-the-art submodels for diesel engine flow and combustion: spray atomization, drop breakup/coalescence, multi-component fuel vaporization, spray/wall interaction, ignition and combustion, wall heat transfer, unburned HC and NOx formation, soot and radiation, and the intake flow process. Improved and/or new submodels which were completed are: wall heat transfer with unsteadiness and compressibility, laminar-turbulent characteristic time combustion with unburned HC and Zeldo'vich NOx, and spray/wall impingement with rebounding and sliding drops. Results to date show that adding the effects of unsteadiness and compressibility improves the accuracy of heat transfer predictions; spray drop rebound can occur from walls at low impingement velocities (e.g., in cold-starting); larger spray drops are formed at the nozzle due to the influence of vaporization on the atomization process; a laminar-and-turbulent characteristic time combustion model has the flexibility to match measured engine combustion data over a wide range of operating conditions; and finally, the characteristic time combustion model can also be extended to allow predictions of ignition. The accuracy of the predictions is being assessed by comparisons with available measurements. Additional supporting experiments are also described briefly. To date, comparisons with measured engine cylinder pressure and heat flux data were made for homogeneous charge, spark-ignited and compression-ignited engines. The model results are in good agreement with the experiments.

Reitz, R. D.↗

Evaluation of User Experience of Self-Scheduling Software for Astronauts: Defining a Satisfaction Baseline

As NASA turns its sights to deep-space exploration, a greater focus on sup-porting crew autonomy has led to the development of Playbook, a self-scheduling software tool. Evaluating the user satisfaction of Playbook is essential in ensuring its usability for critical spaceflight operations. Satisfaction of an interface is often quantified with attitude surveys, such as the User Experience Questionnaire (UEQ). This paper demonstrates an application of the UEQ in comparing the user experience of Playbook interface de-signs for displaying graphical data. We lay the foundation for future user experience comparisons by defining a satisfaction baseline, which is crucial as more features are integrated into Playbook’s interface. This work ex-tends a validated user experience framework into a spaceflight domain, allowing optimization of human-computer interaction as future operational tools are developed.

user experience↗

Search for Time Reversal Symmetry Violation with TREK at J-PARC (Closeout Report)

This DOE Early Career Award has enabled Dr. Michael Kohl to take on and expand his leadership roles in several projects such as TREK@J-PARC, OLYMPUS@DESY, MUSE@PSI, and in the experimental program in Hall C at Jefferson Lab. Dr. Kohl has successfully accomplished several items: (i) Preliminary results from SANE (E08-003) at Jefferson Lab: Former HU graduate student Anusha Liyanage has pursued her PhD research on SANE. Her analysis of the elastic ep scattering data has resulted in the extraction of the proton electric-to-magnetic form factor ratio from double spin asymmetries at the highest momentum transfer to date. The results are almost final and a publication is in preparation. (ii) Approval of TREK/E36 for running, preparation of simulation and analysis: the TREK experiment has been stage-II approved in fall 2013, has been mounted on the hall floor from November 2014 to April 2015, has been commissioned in April-June 2015 and is scheduled to run in fall 2015. The group has contributed significantly with simulations and magnetic field map calculations, has investigated the sensitivity of TREK to new light neutral particles, and contributed substantially to the mounting and commissioning of the experiment. (iii) Running of OLYMPUS and analysis: Under Dr. Kohl's leadership as spokesman, the OLYMPUS experiment has completed data taking beginning of 2013; calibrations and analysis have been well underway, with results to be expected in the course of 2015. (iv) Operation of GEM detectors at OLYMPUS and MUSE: The GEM telescopes built for OLYMPUS luminosity monitoring with forward-angle ep elastic scattering have been operated successfully, have meanwhile been relocated to PSI, and have been re-commissioned as beam particle trackers for the PSI secondary beams for MUSE. (v) Trained and prepared postdocs and graduate students for their future careers. Two postdocs from Dr. Kohl's group (Dr. Juergen Diefenbach and Dr. Peter Monaghan) have found permanent academic positions. Two former graduate students of the group have graduated and received their PhD degrees in nuclear physics (Dr. Anusha Liyanage and Dr. Ozgur Ates). In particular, this award has enabled Dr. Kohl to pursue the TREK project (Time Reversal Experiment with Kaons) at J-PARC, which he has been leading and advancing as International Spokesperson. Originally proposed as a search for time reversal symmetry violation, the project has evolved into a precision test of lepton flavor universality in the Standard Model along with sensitive searches for physics beyond the Standard Model through a possible discovery of new particles such as a sterile neutrino or a neutral gauge boson from the hidden sector in the mass region up to 300 MeV/c2. Experiment TREK/E36, first proposed in 2010, has been mounted between November 2014 and April 2015, and commissioning with beam has been started in April 2015, with production running anticipated in early summer and late fall 2015. It uses the apparatus from the previous KEK/E-246 experiment with partial upgrades to measure the ratio of decay widths of leptonic two-body decays of the charged kaon to µν and eν, respectively, which is highly sensitive to the ratio of electromagnetic charged lepton couplings and possible new physics processes that could differentiate between μ and e, hence breaking lepton flavor universality of the Standard Model. Through the searches for neutral massive particles, TREK/E36 can severely constrain any new physics scenarios designed to explain the proton radius puzzle.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Demonstrating Autonomous Mission Operations Onboard the International Space Station

The NASA Autonomous Mission Operations (AMO) project conducted an experiment to turn over operation and management of selected International Space Station (ISS) sys- tems to the on-board crew. ISS crews managed two different spacecraft systems: the Total Organic Carbon Analyzer (TOCA), a water quality analyzer, and Station Support Com- puters (SSC) laptops, which are non-critical crew computer systems. These systems were selected because they are representative of systems a future crew may need to operate au- tonomously during a deep space mission. The crew autonomously operated these systems, taking on mission operations functions traditionally performed by support teams on the ground, using new software tools that provide decision support algorithms for planning, monitoring and fault management, hardware schematics, system briefs, and data displays that are normally unavailable to the crew. The experiment lasted seven months, during which ISS crews managed TOCA and SSCs on 22 occasions. The AMO software processed data from TOCA and SSCs continuously during this seven month period. The combined performance of the software and crew achieved a 88 success rate on managing TOCA activity, the system for which ground-truth was available.

Autonomous Mission Operations↗