Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASTICITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

SU-C-304-03: Experimental Investigation On the Accuracy of Plastic Scintillation Dosimeters in Small Fields

Purpose: To investigate the accuracy of the Exradin W1 (SI) and of an “in-house” plastic scintillation dosimeter (CHUQ PSD) in small radiation fields. Methods: Output factor (OF) measurements with the W1 and CHUQ PSD were performed for field sizes of 0.5 x 0.5, 1 x 1 and 2 x 2 cm{sup 2}. Both detectors were placed parallel to the central axis (CAX) in water. The spectrum discrimination calibration method was performed in each set-up to account for the Cerenkov (CRV) signal created in the fiber. The OFs were compared to the expected field factors in water derived using i) Monte Carlo (MC) simulations of an accurate accelerator model and ii) microLion (PTW) and D1V diode (SI) OFs. MC-derived correction factors were applied to both the microLion and D1V OFs. For the CHUQ PSD the calibration was repeated in water (// CAX), solid water (perpendicular to CAX) and under a shielded configuration. The signal was collected using a spectrometer (wavelength range = 185–1100 nm). Spectral analysis was performed to evaluate potential changes of the spectral distributions under the various calibration set-up configurations. Results: The W1 OFs presented an over-response for the 0.5 x 0.5 cm{sup 2} in the range of 3 – 4.1% relative to the expected field factor. The CHUQ PSD presented an under-response in the range of 1.5 – 2.7%, without accounting for volume averaging. The CRV spectra under the various calibration procedures appeared similar to each other and only minor changes were observed to the respective OFs. Conclusion: The W1 and CHUQ PSD can be used in small fields down to a 1 x 1 cm{sup 2} field size. Discrepancies were encountered between the two detectors for the smallest field size of 0.5 x 0.5 cm{sup 2} with the CHUQ PSD exhibiting a closer agreement to the expected field factor. Funding sources: 1) Alexander S. Onassis Public Benefit Foundation in Greece and 2) CREATE Medical Physics Research Training Network grant of the Natural Sciences and Engineering Research Council, Grant number: 432290, RGPIN-2014-06475.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2015

SU-E-J-208: Feasibility Study On Using Small Plastic Phantoms for Auditing Radiation Output of MR-Linac Systems

Purpose: To study feasibility of using small plastic phantoms designed for conventional linac output auditing to measure the output of MR-Linac systems. Methods: For simulations, the CT scan of an IROC(formerly RPC) acrylic block phantom designed for 8 MV beams was imported in a research version of the treatment planning system (Monaco). Dose delivered to three TLDs in the block was calculated with a Monte Carlo algorithm and a beam model based on an MR-linac prototype with and without a magnetic field (B=1.5T). In a large mathematical water phantom, the same beam was used to calculate dose in full scatter conditions. The block factor (F) was calculated as the ratio of the average dose to the block TLDs to the dose at the reference point in the mathematical phantom. For experimental measurement, four IROC blocks were irradiated with the MR-linac prototype, and data were analyzed by IROC. Results: The F factor without a B field was 1.053. When a B field was applied, it changed the dose distribution in the block, especially on the edges. With a B field parallel to the long axes of the TLD, F was 1.038. However, with a perpendicular B field, F factor increased slightly to 1.075. In the IROC report, the output determined with two blocks parallel to the B field was 2.3% higher than the output by the two blocks perpendicular to the B field. The average of all four blocks was within 2% of machine output measured with an ion chamber. Conclusion: It may be feasible to expand the utility of the acrylic block phantoms for radiation output auditing from conventional linacs to MR-linacs. However, the scatter correction factor can change due to the B field and its orientation to the block. More symmetric phantom designs may be less prone to mistakes. We acknowledge research support from Elekta.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Toward biomass-derived renewable plastics: Production of 2,5-furandicarboxylic acid from fructose

We report a process for converting fructose, at a high concentration (15 weight %), to 2,5-furandicarboxylic acid (FDCA), a monomer used in the production of polyethylene furanoate, a renewable plastic. In our process, fructose is dehydrated to hydroxymethylfurfural (HMF) at high yields (70%) using a γ-valerolactone (GVL)/H 2 O solvent system. HMF is subsequently oxidized to FDCA over a Pt/C catalyst with 93% yield. The advantage of our system is the higher solubility of FDCA in GVL/H 2 O, which allows oxidation at high concentrations using a heterogeneous catalyst that eliminates the need for a homogeneous base. In addition, FDCA can be separated from the GVL/H 2 O solvent system by crystallization to obtain >99% pure FDCA. Our process eliminates the use of corrosive acids, because FDCA is an effective catalyst for fructose dehydration, leading to improved economic and environmental impact of the process. Our techno-economic model indicates that the overall process is economically competitive with current terephthalic acid processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Recycling of multilayer plastic packaging materials by solvent-targeted recovery and precipitation

Many plastic packaging materials manufactured today are composites made of distinct polymer layers (i.e., multilayer films). Billions of pounds of these multilayer films are produced annually, but manufacturing inefficiencies result in large, corresponding postindustrial waste streams. Although relatively clean (as opposed to municipal wastes) and of near-constant composition, no commercially practiced technologies exist to fully deconstruct postindustrial multilayer film wastes into pure, recyclable polymers. Here, we demonstrate a unique strategy we call solvent-targeted recovery and precipitation (STRAP) to deconstruct multilayer films into their constituent resins using a series of solvent washes that are guided by thermodynamic calculations of polymer solubility. We show that the STRAP process is able to separate three representative polymers (polyethylene, ethylene vinyl alcohol, and polyethylene terephthalate) from a commercially available multilayer film with nearly 100% material efficiency, affording recyclable resins that are cost-competitive with the corresponding virgin materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Structural plasticity enables evolution and innovation of RuBisCO assemblies

Oligomerization is a core structural feature that defines the form and function of many proteins. Most proteins form molecular complexes; however, there remains a dearth of diversity-driven structural studies investigating the evolutionary trajectory of these assemblies. Ribulose-1,5-bisphosphate carboxylase-oxygenase (RuBisCO) is one such enzyme that adopts multiple assemblies, although the origins and distribution of its different oligomeric states remain cryptic. Here, we retrace the evolution of ancestral and extant form II RuBisCOs, revealing a complex and diverse history of oligomerization. We structurally characterize a newly discovered tetrameric RuBisCO, elucidating how solvent-exposed surfaces can readily adopt new interactions to interconvert or give rise to new oligomeric states. We further use these principles to engineer and demonstrate how changes in oligomerization can be mediated by relatively few mutations. Our findings yield insight into how structural plasticity may give rise to new oligomeric states.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2013

DLTS Study of plastically deformed copper-doped n-type germanium

Classical deep level transient spectroscopy (DLTS) and its modification are used to study the time constants of electron capture by substitutional Cu{sub s}{sup 2-} atoms and thermal electron emission from Cu{sub s}{sup 3-} atoms in plastically deformed Cu-doped n-type germanium. The activation energy E{sub {sigma}}, the electron capture cross-section, the energy E{sub 3} of the third acceptor level of Cu{sub s/3-} atoms, and the ionization entropy are determined. The lack of E{sub 3}-level broadening, the exponential capture kinetics for a filling-pulse duration of t{sub p} Less-Than-Or-Equivalent-To 1 ms, the fact that the Cu{sub s/2-/3-}-atom recombination parameters are independent of the dislocation density, and the low concentration of Cu{sub s/2-/3-} atoms in the deformed samples suggest that the DLTS spectra are due to Cu{sub s/2-/3-} atoms located outside the Read cylinders.

36 MATERIALS SCIENCE↗
DOE OSTI2015

EBIC and LBIC studies of the properties of extended defects in plastically deformed silicon

The results of comparative experimental studies of one- and two-dimensional defects in plastically deformed silicon by the electron-beam-induced current (EBIC) and light-beam-induced current (LBIC) techniques are reported. It is shown that the contrast of two-dimensional defects (dislocation trails) in the LBIC method can by much more pronounced than that in the EBIC technique, which is in good agreement with the results of calculations. The higher sensitivity of the LBIC technique is mainly due to deeper penetration of the optical beam into the material in comparison to the penetration of the electron beam of a scanning electron microscope.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Analysis of the Optical Properties of Plastically Deformed ZnS(O) Using Band-Anticrossing Theory

The cathodoluminescence and absorption of plastically deformed ZnS(O) single crystals are investigated in the light of band-anticrossing theory. The difference in the oxygen content in the surface layer and in the sample bulk is found using a scanning electron microscope and according to cathodoluminescence data. This fact explains the specifics of the spectral position of the fundamental absorption edge and exciton spectra. The shift dynamics of the bands of self-activated luminescence on deep A centers (SA luminescence) during deformation recrystallization with an increase in the dissolved oxygen concentration is presented. Restriction of the spectral range of the appearance of self-activated luminescence at shallow levels—“edge” luminescence—is established. The nature of the emission bands in the wavelength ranges of 336–350 and 364–390 nm is established. These results refine the energy model of ZnS(O) crystals and can be useful in the case of the practical use of their structure-sensitive properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Training Spiking Neural Networks with Synaptic Plasticity under Integer Representation

Neuromorphic computing is emerging as a promising Beyond Moore computing paradigm that employs event-triggered computation and non-von Neumann hardware. Spike Timing Dependent Plasticity (STDP) is a well-known bio-inspired learning rule that relies on activities of locally connected neurons to adjust the weights of their respective synapses. In this work, we analyze a basic STDP rule and its sensitivity on the different hyperparameters for training spiking neural networks (SNNs) with supervision, customized for a neuromorphic hardware implementation with integer weights. We compare the classification performance on four UCI datasets (iris, wine, breast cancer and digits) that depict varying levels of complexity. We perform a search for optimal set of hyperparameters using both grid search and Bayesian optimization. Through the use of Bayesian optimization, we show the general trends in hyperparameter sensitivity in SNN classification problem. With the best sets of hyperparameters, we achieve accuracies comparable to some of the best performing SNNs on these four datasets. With a highly optimized supervised STDP rule we show that these accuracies can be achieved with just 20 epochs of training.

Kulkarni, Shruti↗
DOE OSTI2023

Transition from Vogel-Fulcher-Tammann to Arrhenius Ion-Conducting Behavior in Poly(Ethyl Acrylate)-Based Solid Polymer Electrolytes via Succinonitrile Plasticizer Addition

Solid polymer electrolytes (SPEs) offer potential advantages over liquid electrolytes, including flexibility, safety, and processability. However, they suffer from low room-temperature ionic conductivity. Recently, it has been reported a poly(ethyl acrylate) based (polyEA) SPE, by incorporating 50 wt% of succinonitrile (SN) solid plasticizer, 30 wt% of lithium salt and 5 wt% of fluoroethylene carbonate additive, which achieves a high room-temperature ionic conductivity of 1.01 × 10 −3 S cm −1 (Nat. Nanotechnol, 2022, 17, 768-776). This novel SPE exhibits stability against Li 0 and anodic stability up to 4.9 V vs Li + /Li. However, the specific mechanism responsible for its high ionic conductivity remains elusive. In this work, by adjusting the weight ratio of SN in the SPE, a transition from Vogel-Fulcher-Tammann to Arrhenius ion-conducting behavior is observed. It is demonstrated that the addition of SN leads to the gradual decoupling of Li-ion from the polymer backbone and its coordination with SN, as revealed by 6 Li solid-state nuclear magnetic resonance spectroscopy. As a result, Li-ion migration primarily occurs through SN rather than the segmental motion of the polymer backbone. Performances of the SPE in Cu||Li, Li||Li and a LiFePO 4 ||Li pouch cells are shown to demonstrate the commercial viability of this SPE in Li 0 -anode solid-state batteries.

Electrochemistry↗
DOE OSTI2023

4P (Plastic Parallel Pathways Platform) [SWR 23-84]

The Plastic Parallel Pathways Platform (4P) combines life cycle assessment, agent-based modeling within a dynamic material flow analysis structure to compute the environmental impacts of different recycling options under various behavioral interventions.

Walzberg, Julien↗
DOE OSTI2024

Subsurface Spectroscopy of Thermal Degradation Inside an Inert Plastic Bonded Explosive (PBX) Simulant Using Feedback-Assisted Wavefront Shaping

We characterize the subsurface thermal degradation of an inert analog of high-explosive molecular crystals (Eu:Y(acac) 3 (DPEPO)) (EYAD) embedded inside of a plastic bonded explosive simulant using feedback-assisted wavefront shaping-based fluorescence and Raman spectroscopies. This technique utilizes wavefront shaping to focus pump light inside a heterogeneous material onto a target particle, which significantly improves its spectroscopic signature. We find that embedding the EYAD crystals in the heterogeneous polymer results in improved thermal stability, relative to bare crystal measurements, with the crystal remaining fluorescent to >612 K inside of the heterogeneous material, while the bare crystal’s fluorescence is fully quenched by 500 K. We hypothesize that this improvement is due to the polymer restricting the effects of EYAD melting, which occurs at 400 K and is the primary mechanism for spectroscopic changes in the temperature range explored.

Anderson, Benjamin R.↗
DOE OSTI2015

Measurement of tritium with plastic scintillator surface improvement with plasma treatment

Tritium is usually measured by using a liquid scintillation counter. However, liquid scintillator used for measurement will become radioactive waste fluid. To solve this issue, we have developed a method of measuring tritium samples with plasma-treated plastic scintillator (PS)sheets (Plasma method). The radioactive sample is held between 2 PS sheets and the whole is enclosed in a a low-potassium glass vial. With the Plasma method of 2-min plasma treatment, we have obtained measurement efficiency of 48 ± 2 % for 2 min measurement of tritium except for tritiated water. The plasma treatment makes the PS surface rough and hydrophilic which contributes to improve the contact between tritium and PS. On the other hand, it needed almost 6 hours to obtain constant measurement efficiency. The reason was that the dry-up handling in the vial needed longer time to vaporize H{sub 2}O molecules than in the air. We tried putting silica gel beads into vials to remove H{sub 2}O molecules from PS sheet surface quickly. The silica gel beads worked well and we got constant measurement efficiency within 1-3 hours. Also, we tried using other kinds of PS treated with plasma to obtain higher measurement efficiencies of tritium samples.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Competition and cooperation: The plasticity of bacterial interactions across environments

Bacteria live in diverse communities, forming complex networks of interacting species. A central question in bacterial ecology is whether species engage in cooperative or competitive interactions. But this question often neglects the role of the environment. Here, we use genome-scale metabolic networks from two different open-access collections (AGORA and CarveMe) to assess pairwise interactions of different microbes in varying environmental conditions (provision of different environmental compounds). By computationally simulating thousands of environments for 10,000 pairs of bacteria from each collection, we found that most pairs were able to both compete and cooperate depending on the availability of environmental resources. This modeling approach allowed us to determine commonalities between environments that could facilitate the potential for cooperation or competition between a pair of species. Namely, cooperative interactions, especially obligate, were most common in less diverse environments. Further, as compounds were removed from the environment, we found interactions tended to degrade towards obligacy. However, we also found that on average at least one compound could be removed from an environment to switch the interaction from competition to facultative cooperation or vice versa. Together our approach indicates a high degree of plasticity in microbial interactions in response to the availability of environmental resources.

Biochemistry & Molecular Biology↗
DOE OSTI2014

Analysis of Global Gene Expression in Brachypodium distachyon Reveals Extensive Network Plasticity in Response to Abiotic Stress

Brachypodium distachyon is a close relative of many important cereal crops. Abiotic stress tolerance has a significant impact on productivity of agriculturally important food and feedstock crops. Analysis of the transcriptome of Brachypodium after chilling, high-salinity, drought, and heat stresses revealed diverse differential expression of many transcripts. Weighted Gene Co-Expression Network Analysis revealed 22 distinct gene modules with specific profiles of expression under each stress. Promoter analysis implicated short DNA sequences directly upstream of module members in the regulation of 21 of 22 modules. Functional analysis of module members revealed enrichment in functional terms for 10 of 22 network modules. Analysis of condition-specific correlations between differentially expressed gene pairs revealed extensive plasticity in the expression relationships of gene pairs. Photosynthesis, cell cycle, and cell wall expression modules were down-regulated by all abiotic stresses. Modules which were up-regulated by each abiotic stress fell into diverse and unique gene ontology GO categories. This study provides genomics resources and improves our understanding of abiotic stress responses of Brachypodium.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2013

The Effects of Temperature, Aging, and Plasticizer Content on VCE

Ethylene vinyl acetate vinyl alcohol (VCE) is a terpolymer. It is commonly used as a binder for highly filled elastomeric materials (2). Because of its use, it is important that it is studied extensively to ascertain the possible risks. It is crucial to know how VCE is affected by temperature, aging and how plasticizers may affect this polymer. Aging can be tested experimentally by using different temperatures and heating rates and times. If the VCE breaks down or reacts it could be detrimental to the application and there could be safety concerns. The starting copolymer in the synthesis of VCE is ethylene vinyl acetate (EVA).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2013

EBSD Characterization of Tubular Cladding Plasticity after Bend Testing: A Feasibility Study

The Light Water Reactor Sustainability (LWRS) Program developed a bend test method for tubular samples during FY12. The purpose of this report is to provide details of the Electron Backscattered Diffraction (EBSD) measurements performed on the various sample sets to provide a comparative baseline of the impact that the silicon carbide ceramic matrix composites (SiC-CMC) sleeves had on the deformation and plasticity properties of the Zircaloy-4 (Zr-4) cladding tube.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗