Search NASA⌕ Search

SEARCH · Search NASA

Results for “Performance Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

6DOF Testing of the SLS Inertial Navigation Unit

The Navigation System on the NASA Space Launch System (SLS) Block 1 vehicle performs initial alignment of the Inertial Navigation System (INS) navigation frame through gyrocompass alignment (GCA). In lieu of direct testing of GCA accuracy in support of requirement verification, the SLS Navigation Team proposed and conducted an engineering test to, among other things, validate the GCA performance and overall behavior of the SLS INS model through comparison with test data. This paper will detail dynamic hardware testing of the SLS INS, conducted by the SLS Navigation Team at Marshall Space Flight Center's 6DOF Table Facility, in support of GCA performance characterization and INS model validation. A 6-DOF motion platform was used to produce 6DOF pad twist and sway dynamics while a simulated SLS flight computer communicated with the INS. Tests conducted include an evaluation of GCA algorithm robustness to increasingly dynamic pad environments, an examination of GCA algorithm stability and accuracy over long durations, and a long-duration static test to gather enough data for Allan Variance analysis. Test setup, execution, and data analysis will be discussed, including analysis performed in support of SLS INS model validation.

Geohagan, Kevin W.↗

Automated model generation and parameter estimation of building energy models using an ontology-based framework

This study presents a methodology for automated model generation and parameter estimation of building energy models using semantic modeling and Bayesian estimation. Semantic modeling techniques are used to represent the system components and their interactions, facilitating the automatic generation of a simulation model from dynamic component models. The proposed approach is applied to a case study of a ventilation system where a simulation model is generated, calibrated, and assessed through different performance metrics. These metrics demonstrate the accuracy and reliability of both model point estimates and probabilistic prediction intervals across all model outputs. Overall, the proposed methodology offers a systematic and automated approach to model development and calibration in building energy systems, with potential applications in building performance analysis, monitoring, and optimization.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

OFDM Radar Space-Time Adaptive Processing by Exploiting Spatio-Temporal Sparsity

We propose a sparsity-based space-time adaptive processing (STAP) algorithm to detect a slowly-moving target using an orthogonal frequency division multiplexing (OFDM) radar. We observe that the target and interference spectra are inherently sparse in the spatio-temporal domain. Hence, we exploit that sparsity to develop an efficient STAP technique that utilizes considerably lesser number of secondary data and produces an equivalent performance as the other existing STAP techniques. In addition, the use of an OFDM signal increases the frequency diversity of our system, as different scattering centers of a target resonate at different frequencies, and thus improves the target detectability. First, we formulate a realistic sparse-measurement model for an OFDM radar considering both the clutter and jammer as the interfering sources. Then, we apply a residual sparse-recovery technique based on the LASSO estimator to estimate the target and interference covariance matrices, and subsequently compute the optimal STAP-filter weights. Our numerical results demonstrate a comparative performance analysis of the proposed sparse-STAP algorithm with four other existing STAP methods. Furthermore, we discover that the OFDM-STAP filter-weights are adaptable to the frequency-variabilities of the target and interference responses, in addition to the spatio-temporal variabilities. Hence, by better utilizing the frequency variabilities, we propose an adaptive OFDM-waveform design technique, and consequently gain a significant amount of STAP-performance improvement.

adaptive waveform design.↗

Some observations on the behavior of the Langley model rotor blade

The design of the model rotor and the comparative study of coupled beam theory and the finite element analysis performed earlier at the Aerostructures Directorate by Robert Hodges and Mark Nixon is examined. Attention is focused upon two matters: (1) an examination of the small discrepancies between twist angle predictions under pure torque and radial loading, and (2) an assessment of nonclassical effects in bending behavior. The primary objective is understanding, particularly with regard to cause and effect relationships. Understanding, together with the simple, affordable nature of the coupled beam analysis, provides a sound basis for design.

Rehfield, L. W.↗

A Tool for Defining Tow-Steered Laminates for Finite Element Grids

Tailoring of composite laminates is traditionally performed by changing the orientation of straight fibers in one or more plies. Modern automated fiber placement machines facilitate placement of bundles of curved fibers (tows) in a process called tow-steering, but additional variables must be used to define the shapes of tow-steered fiber paths. In this paper, a Python-based tool, called Automated Tool for Steered COmposite Optimizable Laminates (ATSCOOL), is presented for modeling steered tows as chains of circular arcs. The geometry for defining tow path shapes using four input variables is described. The formulae for determining gaps and overlaps between clusters of consecutive tows, called courses, and for determining the number of steered courses needed to cover a rectangular panel are presented. Graphical representation of courses and thickness distribution in an example panel using the ATSCOOL software are presented. Finally, an example of a finite element analysis performed using the property information output from ATSCOOL is shown.

finite element analysis↗

Mission Scenario Development Workbench

The Mission Scenario Development Workbench (MSDW) is a multidisciplinary performance analysis software tool for planning and optimizing space missions. It provides a number of new capabilities that are particularly useful for planning the surface activities on other planets. MSDW enables rapid planning of a space mission and supports flight system and scientific-instrumentation trades. It also provides an estimate of the ability of flight, ground, and science systems to meet high-level mission goals and provides means of evaluating expected mission performance at an early stage of planning in the project life cycle. In MSDW, activity plans and equipment-list spreadsheets are integrated with validated parameterized simulation models of spacecraft systems. In contrast to traditional approaches involving worst-case estimates with large margins, the approach embodied in MSDW affords more flexibility and more credible results early in the lifecycle through the use of validated, variable- fidelity models of spacecraft systems. MSDW is expected to help maximize the scientific return on investment for space missions by understanding early the performance required to have a successful mission while reducing the risk of costly design changes made at late stages in the project life cycle.

Kordon, Mark↗

Implementation of Parallel Adaptive-Krylov Exponential Solvers for Stiff Problems

Recently exponential integrators have been receiving increased attention as a means of solving large stiff systems of ODEs. Preliminary performance analysis demonstrated that exponential integrators hold promise compared to state-of-the-art implicit methods. However, much work remains to be done to understand in detail possible computational advantages these methods may offer in practice. This is particularly true for supercomputer-scale problems as there has been very little work on parallelizing exponential methods. In this paper we describe an implementation of a suite of parallel exponential solvers. Additionally, we present some performance tests on four stiff benchmark problems of a particular adaptive-Krylov exponential propagation iterative Runge--Kutta (EPIRK) method from the suite, and compare efficiency with the Newton--Krylov implicit solver CVODE.

97 MATHEMATICS AND COMPUTING↗

Accommodations assessment: Spaceborne Doppler lidar wind measuring system

An accommodations analysis performed by the MSFC Preliminary Design Office for a spaceborne Doppler lidar wind measuring system is summarized. A dedicated, free-flying spacecraft design concept is described. Mass and beginning-of-life power requirements are estimated at 2260 kg and 6.0 - 8.5 kW respectively, to support a pulsed, CO2, Doppler lidar having a pulse energy of 10 J, pulse rate of 8 Hz, and efficiency of approximately 5%. Under the assumptions of the analysis, such a system would provide wind measurements on a global scale, with accuracies of a few meters per second.

Source record↗

Electron holography of devices with epitaxial layers

Applicability of electron holography to deep submicron Si devices with epitaxial layers is limited due to lack of the mean inner potential data and effects of the sample tilt. The mean inner potential V{sub 0} = 12.75 V of the intrinsic epitaxial SiGe was measured by electron holography in devices with Ge content C{sub Ge} = 18%. Nanobeam electron diffraction analysis performed on the same device structure showed that SiGe is strain-free in [220] direction. Our results showed good correlation with simulations of the mean inner potential of the strain-free SiGe using density function theory. A new method is proposed in this paper to correct electron holography data for the overlap of potentials of Si and the epitaxial layer, which is caused by the sample tilt. The method was applied to the analysis of the dopant diffusion in p-Field-effect Transistor devices with the identical gate length L = 30 nm, which had alternative SiGe geometry in the source and drain regions and was subjected to different thermal processing. Results have helped to understand electrical data acquired from the same devices in terms of dopant diffusion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NNSA ASC Exascale Environment Planning, Applications Working Group, Report February 2011

The scope of the Apps WG covers three areas of interest: Physics and Engineering Models (PEM), multi-physics Integrated Codes (IC), and Verification and Validation (V&V). Each places different demands on the exascale environment. The exascale challenge will be to provide environments that optimize all three. PEM serve as a test bed for both model development and 'best practices' for IC code development, as well as their use as standalone codes to improve scientific understanding. Rapidly achieving reasonable performance for a small team is the key to maintaining PEM innovation. Thus, the environment must provide the ability to develop portable code at a higher level of abstraction, which can then be tuned, as needed. PEM concentrate their computational footprint in one or a few kernels that must perform efficiently. Their comparative simplicity permits extreme optimization, so the environment must provide the ability to exercise significant control over the lower software and hardware levels. IC serve as the underlying software tools employed for most ASC problems of interest. Often coupling dozens of physics models into very large, very complex applications, ICs are usually the product of hundreds of staff-years of development, with lifetimes measured in decades. Thus, emphasis is placed on portability, maintainability and overall performance, with optimization done on the whole rather than on individual parts. The exascale environment must provide a high-level standardized programming model with effective tools and mechanisms for fault detection and remediation. Finally, V&V addresses the infrastructure and methods to facilitate the assessment of code and model suitability for applications, and uncertainty quantification (UQ) methods for assessment and quantification of margins of uncertainty (QMU). V&V employs both PEM and IC, with somewhat differing goals, i.e., parameter studies and error assessments to determine both the quality of the calculation and to estimate expected deviations of simulations from experiments. The exascale environment must provide a performance envelope suitable both for capacity calculations (high through-put) and full system capability runs (high performance). Analysis of the results place shared demand on both the I/O as well as the visualization subsystems.

97 MATHEMATICS AND COMPUTING↗

Long Duration Energy Storage Viability Survey

Energy storage technologies that can economically store and provide electricity over multi-day and seasonal timescales are likely to be a critical component of a sustainable and resilient energy system. This analysis performs a broad survey of energy storage technologies to find storage media that are promising for these long-duration energy storage applications.

levelized cost of storage↗

Recovery of Buried Discrete Radioactive Objects by Channel-Specific Analysis of Gamma Scan Data - 19110

During radiological clean-up activities, gamma scan survey data collected from across an industrial site revealed spatially varying concentrations in radioactivity related to naturally occurring soil constituents or dissimilar fill materials that may have been placed at the site. A three-step process was developed to assess the data in order to identify radiation anomalies that most likely could represent small, buried discrete radioactive objects (ROs). The three-step process consists of: (1) define the radiological composition of the site isotopically, (2) spatially parse the data into more homogeneous subgroupings based on the site's radiological composition, and (3) perform analysis of the data subgroupings to identify statistical and spatial population outliers (i.e., radiation anomalies) that otherwise may be masked by the overall variation in the data. Using this process, locations containing buried low-specific activity ROs or higher activity ROs whose radiation is attenuated by soil can be identified and investigated. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Feasibility Assessment of Long-Term Electrical Resistivity Monitoring of a Nitrate Plume

Long-term monitoring solutions at contaminated sites are necessary to track plume migration and evaluate the performance of remediation efforts. Electrical resistivity imaging (ERI) can potentially provide information about plume dynamics; however, the feasibility and likelihood of success is seldom evaluated before conducting a field study. Coupling flow and transport models with geoelectrical models provides a powerful way to assess the potential effectiveness of an actual ERI field campaign. in this paper, we present a coupled approach for evaluating the feasibility of monitoring nitrate migration and remediation using 4D time-lapse ERI at a legacy nuclear waste facility. This kilometer-scale study focuses on depths below the water table (~70 m). A flow and transport model is developed to perform simulations of nitrate migration and removal via a hypothetical pump-and-treat system. A tracer injection is also simulated at the leading edge of the nitrate plume to enhance the conductivity contrast between the native subsurface and the groundwater fluids. Images of bulk conductivity provide limited information concerning plume migration while time-lapse difference images, which remove the static effects of geology, provide more useful information concerning plume dynamics over time. A spatial moment analysis performed on flow and transport and ERI models matches well during the tracer injection; however, inversion regularization smoothing otherwise limits the value in terms of locating the center of mass. We find that the addition of a tracer enables ERI to characterize plume dynamics during pump-and-treat operations, and late-time ERI monitoring provides a conservative estimate of nitrate plume boundaries in this synthetic study.

54 ENVIRONMENTAL SCIENCES↗

Blending Pipeline Analysis Tool for Hydrogen (BlendPATH) Documentation and User Manual

The Blending Pipeline Analysis Tool for Hydrogen (BlendPATH) is a flexible, open-source Python tool designed to provide users with case-by-case analysis capabilities to identify the necessary modifications to repurpose existing natural gas transmission pipeline networks to transport hydrogen as a blend of a user-specified volume fraction of hydrogen or as a pure stream and to estimate the associated capital and operating expenditures resulting from those modifications. This tool is intended to be applied during the initial screening stage of a prospective project when pipeline developers compile transmission pipeline technical documentation and history but prior to performing detailed pipeline inspections. Performing analysis with BlendPATH during this initial screening stage can provide the user with an understanding of promising opportunities and probable economic outcomes of repurposing their pipeline network for hydrogen before proceeding with detailed pipeline materials testing and pipeline inspections. BlendPATH consists of multiple modules to simulate, assess, and modify existing natural gas transmission pipeline network designs to be compatible with hydrogen as a blend or pure stream. The tool employs an open-source gas network hydraulic model to simulate existing, user-specified transmission pipeline networks, and it applies ASME B31.12 to assess the pipe segments within these networks for compatibility with hydrogen and to modify the networks to achieve compatibility where the existing infrastructure is inadequate. Users can specify ASME B31.12 design options for pipeline assessment and can select from multiple methods for pipeline modification. This report details the functionalities of BlendPATH Version 2.0.2 and demonstrates an example of applying BlendPATH to a case study. Potential and intended users of this framework include natural gas pipeline developers and operators and researchers at both public and private institutions. BlendPATH is publicly available at https://github.com/NREL/BlendPATH.

08 HYDROGEN↗

The effects of seasonal and latitudinal earth infrared radiance variations on ERBS attitude control

Analysis performed in the Flight Dynamics Facility by the Earth Radiation Budget Satellite (ERBS) Attitude Determination Support team illustrates the pitch attitude control motion and roll attitude errors induced by Earth infrared (IR) horizon radiance variations. IR scanner and inertial reference unit (IRU) pitch and roll flight data spanning 4 years of the ERBS mission are analyzed to illustrate the changes in the magnitude of the errors on time scales of the orbital period, months, and seasons. The analysis represents a unique opportunity to compare prelaunch estimates of radiance-induced attitude errors with flight measurements. As a consequence of this work the following additional information is obtained: an assessment of an average model of these errors and its standard deviation, a measurement to determine and verify previously proposed corrections to the current Earth IR radiance data base, and the possibility of a mean motion model derived from flight data in place of IRU data for ERBS fine attitude determination.

Phenneger, M. C.↗

The effects of seasonal and latitudinal earth infrared radiance variations on ERBS attitude control

Analysis performed in the Flight Dynamics Facility by the Earth Radiation Budget Satellite (ERBS) Attitude Determination Support team illustrates the pitch attitude control motion and roll attitude errors induced by Earth infrared (IR) horizon radiance variations. IR scanner and inertial reference unit (IRU) pitch and roll flight data spanning 4 years of the ERBS mission are analyzed to illustrate the changes in the magnitude of the errors on time scales of the orbital period, months, and seasons. The analysis represents a unique opportunity to compare prelaunch estimates of radiance-induced attitude errors with flight measurements. As a consequence of this work the following additional information is obtained: an assessment of an average model of these errors and its standard deviation, a measurement to determine and verify previously proposed corrections to the current Earth IR radiance data base, and the possibility of a mean motion model derived from flight data in place of IRU data for ERBS fine attitude determination.

Phenneger, M.↗

Applications of Nuclear Thermal Propulsion Systems for Deep Space Science Missions

Nuclear thermal propulsion (NTP) systems occupy a unique area in the space propulsion technology landscape due to their ability to combine moderate-to-high thrust systems normally seen in chemical propulsion systems with specific impulses that are closer to those observed in some electric propulsion systems. Consequently, NTP systems have the potential to greatly expand access to deep space and can enable a variety of missions that achieve the science goals outlined in NASA’s decadal surveys. This paper leverages previous analysis performed to show the applicability of NTP systems for notional science missions, expanding the analyzed portfolio to encompass additional science mission profiles and demonstrating how the use of NTP affects various mission parameters, such as trip time and delivered mass. This paper also outlines efforts to improve the fidelity of the existing NTP design concepts and vehicles that are utilized by leveraging previous work on nuclear propulsion systems for human-Mars missions. The fidelity of the analysis in this work is improved over previous studies, permitting commensurate improvements in the analyses of previous mission concept studies –the Triton lander, the solar polar orbiter, and the interstellar medium probe missions.

Nuclear thermal propulsion↗

Affordable Design: A Methodolgy to Implement Process-Based Manufacturing Cost into the Traditional Performance-Focused Multidisciplinary Design Optimization

The primary objective of this paper is to demonstrate the use of process-based manufacturing and assembly cost models in a traditional performance-focused multidisciplinary design and optimization process. The use of automated cost-performance analysis is an enabling technology that could bring realistic processbased manufacturing and assembly cost into multidisciplinary design and optimization. In this paper, we present a new methodology for incorporating process costing into a standard multidisciplinary design optimization process. Material, manufacturing processes, and assembly processes costs then could be used as the objective function for the optimization method. A case study involving forty-six different configurations of a simple wing is presented, indicating that a design based on performance criteria alone may not necessarily be the most affordable as far as manufacturing and assembly cost is concerned.

Bao, Han P.↗