Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reduced Defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Lung Cancer Cell Line Screen Links Fanconi Anemia/BRCA Pathway Defects to Increased Relative Biological Effectiveness of Proton Radiation

Purpose: Growing knowledge of genomic heterogeneity in cancer, especially when it results in altered DNA damage responses, requires re-examination of the generic relative biological effectiveness (RBE) of 1.1 of protons. Methods and Materials: For determination of cellular radiosensitivity, we irradiated 17 lung cancer cell lines at the mid-spread-out Bragg peak of a clinical proton beam (linear energy transfer, 2.5 keV/μm). For comparison, 250-kVp X rays and {sup 137}Cs γ-rays were used. To estimate the RBE of protons relative to {sup 60}Co (Co60eq), we assigned an RBE(Co60Eq) of 1.1 to X rays to correct the physical dose measured. Standard DNA repair foci assays were used to monitor damage responses. FANCD2 was depleted using RNA interference. Results: Five lung cancer cell lines (29.4%) exhibited reduced clonogenic survival after proton irradiation compared with X-irradiation with the same physical doses. This was confirmed in a 3-dimensional sphere assay. Corresponding proton RBE(Co60Eq) estimates were statistically significantly different from 1.1 (P≤.05): 1.31 to 1.77 (for a survival fraction of 0.5). In 3 of these lines, increased RBE was correlated with alterations in the Fanconi anemia (FA)/BRCA pathway of DNA repair. In Calu-6 cells, the data pointed toward an FA pathway defect, leading to a previously unreported persistence of proton-induced RAD51 foci. The FA/BRCA-defective cells displayed a 25% increase in the size of subnuclear 53BP1 foci 18 hours after proton irradiation. Conclusions: Our cell line screen has revealed variations in proton RBE that are partly due to FA/BRCA pathway defects, suggesting that the use of a generic RBE for cancers should be revisited. We propose that functional biomarkers, such as size of residual 53BP1 foci, may be used to identify cancers with increased sensitivity to proton radiation.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Over-expression of COQ10 in Saccharomyces cerevisiae inhibits mitochondrial respiration

Research highlights: {yields} COQ10 deletion elicits a defect in mitochondrial respiration correctable by addition of coenzyme Q{sub 2}, a synthetic diffusible ubiquinone. {yields} The significance that purified Coq10p contains bound Q{sub 6} was examined by testing over-expression of Coq10p on respiration. {yields} Inhibition of CoQ function due to Coq10p excess strength our hypothesis of Coq10p function in CoQ delivery. {yields} Respiratory deficiency caused by more Coq10p was specific and restored by Q{sub 2} in mitochondria or by Coq8p in cells. {yields} Coq8p over-production on other coq mutants revealed a surprisingly higher stability of other Coq proteins. -- Abstract: COQ10 deletion in Saccharomyces cerevisiae elicits a defect in mitochondrial respiration correctable by addition of coenzyme Q{sub 2}. Rescue of respiration by Q{sub 2} is a characteristic of mutants blocked in coenzyme Q{sub 6} synthesis. Unlike Q{sub 6} deficient mutants, mitochondria of the coq10 null mutant have wild-type concentrations of Q{sub 6}. The physiological significance of earlier observations that purified Coq10p contains bound Q{sub 6} was examined in the present study by testing the in vivo effect of over-expression of Coq10p on respiration. Mitochondria with elevated levels of Coq10p display reduced respiration in the bc1 span of the electron transport chain, which can be restored with exogenous Q{sub 2}. This suggests that in vivo binding of Q{sub 6} by excess Coq10p reduces the pool of this redox carrier available for its normal function in providing electrons to the bc1 complex. This is confirmed by observing that extra Coq8p relieves the inhibitory effect of excess Coq10p. Coq8p is a putative kinase, and a high-copy suppressor of the coq10 null mutant. As shown here, when over-produced in coq mutants, Coq8p counteracts turnover of Coq3p and Coq4p subunits of the Q-biosynthetic complex. This can account for the observed rescue by COQ8 of the respiratory defect in strains over-producing Coq10p.

60 APPLIED LIFE SCIENCES↗

Defect and satellite characteristics of additive manufacturing metal powders

Metal additive manufacturing (AM) requires high-quality metal powders to three-dimensionally (3D) print metallic components with complex and customizable geometries. The lack of quantification of AM metal powders creates quality control challenges for 3D printed components, increases the uncertainty of printing reliability and net cost of inspected and certified printed components, and reduces the recyclability of used powders. However, critical characteristics of AM metal powders that are decisive factors for the 3D printing process, such as internal porosity, contamination, and satellite feature, remain ambiguous. In this work, we developed a novel approach to 3D quantify key characteristics of AM metal powders down to individual particles by using high-resolution synchrotron x-ray computed tomography. Empowered by the penetrative capability of high-energy x-ray, internal porosity and contamination within as-atomized metal powders from high-entropy alloys to nickel-based superalloys were evaluated. Additionally, the newly-developed dispersion method enables the homogeneous separation of individual particles, and consequently, results in the implementation of 3D particle shape analysis. To resolve a major challenge of identification and quantification of satellite-feature particles in as-atomized AM metal powders, the satellite features were quantitated by modeling and analyzing the shape parameter of local thickness variance. Furthermore, the 3D analytical methods of particle assessment in this study can be applied to other materials systems like rock, food, and pharmaceutical particles, and provide insights for process optimization across powder metallurgy, concrete, food and pharmaceutical manufacturing, and AM industries.

36 MATERIALS SCIENCE↗

Enhanced Fatigue Behavior in Quenched and Tempered High-Strength Steel by Means of Double Surface Treatments

The aim of this study is to maximize the fatigue life of a high-strength steel. For this purpose, two different kinds of double surface treatments were studied: shot peening plus vibratory finishing and shot peening plus grit blasting. First, a high-intensity peening treatment was applied, with the aim of inducing a deep region submitted to high compressive residual stresses, and a second surface treatment was followed, to reduce the roughness induced in the first treatment and mitigate the damage produced on the specimen surface. The use of such double treatments was demonstrated to be a good choice to achieve high surface hardening and deep compressive residual stress profiles and to minimize surface defects. The fatigue life of the steel was greatly enhanced following the application of both double surface treatments. A vibratory treatment applied for 24 h after the application of a previous shot peening treatment was able to increase the average fatigue life of the single shot-peened samples almost sevenfold, but a much greater fatigue enhancement was produced using grit blasting for only 60 s. Anyway, both second treatments are able to remove the damaged surface layer produced in the first high-intensity shot peening treatment. The obtained results also revealed that an appropriate combination of surface treatments (shot peening + secondary treatment) avoided the initiation of cracks at the surface of the specimens under cyclic bending loads. Instead, crack initiation took place beneath the compressive residual stress field, induced in alumina inclusions that acted as stress concentrators.

36 MATERIALS SCIENCE↗

Tailoring the Properties of Calcium Aluminate Macro-Defect-Free Cements: From Brittle to Ductile Behavior

Cementitious macro-defect-free (MDF) materials can be obtained processing a mixture of a water-soluble polymer, namely polyvinyl alcohol (PVA) and the calcium aluminate cement. Based on process techniques typical of plastics, the MDF products can be obtained in complex forms and, thanks to the reduced water to cement ratio, w/c, their strength is very high compared to standard cements. However, these materials show both the sensitivity typical of water-soluble polymers, presenting a low glass transition temperature (T{sub g}), and the brittle behavior typical of ceramic materials and therefore low toughness. The aim of this work is to modify the mechanical properties of MDF cements by tuning their unacceptable brittle behavior. Water solution of carboxylate styrene butadiene rubber is used as reactive additives, and different mixture formulations are tested changing the rubber-like content both with respect to the fixed water content and PVA amounts. It is shown that the modifications of the organic phase imply small or negligible effects on paste formation of different recipes as detected by the torque–time responses. From flexural and fracture toughness tests, a wide range of responses was observed, and depending on the particular recipe, the mechanical behavior can be tuned from a brittle to a ductile behavior.

36 MATERIALS SCIENCE↗

HSPC117 deficiency in cloned embryos causes placental abnormality and fetal death

Somatic cell nuclear transfer (SCNT) has been successfully used in many species to produce live cloned offspring, albeit with low efficiency. The low frequency of successful development has usually been ascribed to incomplete or inappropriate reprogramming of the transferred nuclear genome. Elucidating the genetic differences between normal fertilized and cloned embryos is key to understand the low efficiency of SCNT. Here, we show that expression of HSPC117, which encodes a hypothetical protein of unknown function, was absent or very low in cloned mouse blastocysts. To investigate the role of HSPC117 in embryo development, we knocked-down this gene in normal fertilized embryos using RNA interference. We assessed the post-implantation survival of HSPC117 knock-down embryos at 3 stages: E9 (prior to placenta formation); E12 (after the placenta was fully functional) and E19 (post-natal). Our results show that, although siRNA-treated in vivo fertilized/produced (IVP) embryos could develop to the blastocyst stage and implanted without any difference from control embryos, the knock-down embryos showed substantial fetal death, accompanied by placental blood clotting, at E12. Furthermore, comparison of HSPC117 expression in placentas of nuclear transfer (NT), intracytoplasmic sperm injection (ICSI) and IVP embryos confirmed that HSPC117 deficiency correlates well with failures in embryo development: all NT embryos with a fetus, as well as IVP and ICSI embryos, had normal placental HSPC117 expression while those NT embryos showing reduced or no expression of HSPC117 failed to form a fetus. In conclusion, we show that HSPC117 is an important gene for post-implantation development of embryos, and that HSPC117 deficiency leads to fetal abnormalities after implantation, especially following placental formation. We suggest that defects in HSPC117 expression may be an important contributing factor to loss of cloned NT embryos in vivo.

60 APPLIED LIFE SCIENCES↗

Force measurement-based discontinuity detection during friction stir welding

Here, the objective of this work is to develop a method for detecting the creation of discontinuities ( i.e. , voids, volume defects) during friction stir welding. Friction stir welding is inherently cost effective, however, the need for significant weld inspection can make the process cost prohibitive. A new approach to weld inspection is required in which an in situ characterization of weld quality can be obtained, reducing the need for postprocess inspection. To this end, friction stir welds with subsurface voids and without voids were created. The subsurface voids were generated by reducing the friction stir tool rotation frequency and increasing the tool traverse speed in order to create “colder” welds. Process forces were measured during welding, and the void sizes were measured postprocess by computerized tomography ( i.e. , 3D X-ray imaging). Two parameters, based on frequency domain content and time-domain average of the force signals, were found to be correlated with void size. Criteria for subsurface void detection and size prediction were developed and shown to be in good agreement with experimental observations. Furthermore, with the proper choice of data acquisition system and frequency analyzer the occurrence of subsurface voids can be detected in real time.

47 OTHER INSTRUMENTATION↗

Vacancy Control in TiNb 2 O 7 : Implications for Energy Applications

Rapid global electrification, including for transportation, has dramatically increased demand for long-lasting and faster-charging batteries. Titanium niobium oxide (TiNb 2 O 7 ) is one of the most promising anode materials for high-power lithium-ion batteries (LIBs). However, the intrinsic low electronic conductivity of TiNb 2 O 7 is a significant drawback. Herein, an almost 10 orders of magnitude increase in conductivity is achieved via reduction of TiNb 2 O 7 in H 2 at 900 °C. The observed dramatic increase in electron conductivity upon reduction is unprecedented and opens new possibilities to produce niobium-based conductive materials for next-generation energy storage. Upon extended reduction, TiNb 2 O 7 converts into a distorted rutile TiNb 2 O 6 structure, which can be reoxidized back into the crystallographic shear phase. In addition, TiNb 2 O 7 can be thermally reduced in an inert atmosphere and reoxidized by CO 2 with excellent oxygen exchange capacity. Thus, the TiNb 2 O 7 Wadsley–Roth phase demonstrates outstanding potential for solar-driven thermochemical CO 2 splitting at 1400 °C. In conclusion, these findings manifest that controlling defect chemistry paves the way for developing advanced materials for LIBs and solar-driven thermochemical fuel production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogen treatment as a detergent of electronic trap states in lead chalcogenide nanoparticles

Lead chalcogenide (PbX) nanoparticles are promising materials for solar energy conversion. However, the presence of trap states in their electronic gap limits their usability, and developing a universal strategy to remove trap states is a persistent challenge. Using calculations based on density functional theory, we show that hydrogen acts as an amphoteric impurity on PbX nanoparticle surfaces; hydrogen atoms may passivate defects arising from ligand imbalance or off-stoichiometric surface terminations irrespective of whether they originate from cation or anion excess. In addition, we show, using constrained density functional theory calculations, that hydrogen treatment of defective nanoparticles is also beneficial for charge transport in films. We also find that hydrogen adsorption on stoichiometric nanoparticles leads to electronic doping, preferentially n-type. Lastly, our findings suggest that postsynthesis hydrogen treatment of lead chalcogenide nanoparticle films is a viable approach to reduce electronic trap states or to dope well-passivated films.

36 MATERIALS SCIENCE↗

Observations of multimode perturbation decay at non-accelerating, soft x-ray driven ablation fronts

Minimizing the growth of hydrodynamic instabilities is a fundamental design issue facing the achievement of thermonuclear ignition and burn with Inertial Confinement Fusion (ICF). The thin capsules and extreme accelerations found in ICF make it an inherently unstable system primarily to Rayleigh-Taylor (RT) occurring at the ablation front. A potential mechanism by which perturbations at the outer capsule surface can be reduced lies in the already present ablative Richtmyer-Meshkov (RM) effect, which operates during the first shock transit of the ablator. At present, the available Equation of State (EOS) models predict a wide range of behavior for the ablative RM oscillations of multimode isolated defects on plastic (CH) capsules. To resolve these differences, we conducted experiments at the OMEGA Laser Facility [T. R. Boehly et al., Optics Comm. 133 (1997)] that measured the evolution of gaussian-shaped bumps driven by soft x-ray ablation from a halfraum. Shock speeds in the CH target were measured to reach 15 {mu}m/ns for halfraum radiation temperatures of 70 eV lasting for up to 7 ns. The evolution of gaussian-shaped bumps of different widths and heights were measured using on-axis x-ray radiography at up to 37 Multiplication-Sign magnification. Bumps with initial widths of 34 and 44 {mu}m FWHM were found to grow by 3 Multiplication-Sign their initial areal density and then saturate out to 6 ns due to lateral compression of the bump characteristic of the formation of a rippled shock front propagating into the solid target. Narrower 17 {mu}m FWHM bumps, on the other hand, grew by roughly 2 Multiplication-Sign followed immediately by a decrease back to initial values of areal density out to 7 ns, which largely agrees with both LEOS 5310 and SESAME 7592 EOS predictions. The difference in observed behavior suggests that high spatial frequency modes found in narrower bumps are needed to significantly affect the ablation front profile on shorter time scales.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An algorithm to unveil the inner structure of objects concealed by beam divergence in radiographic image acquisition systems

Two main parameters rule the performance of an Image Acquisition System, namely, spatial resolution and contrast. For radiographic systems using cone beam arrangements, the farther the source, the better the resolution, but the contrast would diminish due to the lower statistics. A closer source would yield a higher contrast but it would no longer reproduce the attenuation map of the object, as the incoming beam flux would be reduced by unequal large divergences and attenuation factors. This work proposes a procedure to correct these effects when the object is comprised of a hull - or encased in it - possessing a shape capable to be described in analytical geometry terms. Such a description allows the construction of a matrix containing the attenuation factors undergone by the beam from the source until its final destination at each coordinate on the 2D detector. Each matrix element incorporates the attenuation suffered by the beam after its travel through the hull wall, as well as its reduction due to the square of distance to the source and the angle it hits the detector surface. When the pixel intensities of the original image are corrected by these factors, the image contrast, reduced by the overall attenuation in the exposure phase, are recovered, allowing one to see details otherwise concealed due to the low contrast. In order to verify the soundness of this approach, synthetic images of objects of different shapes, such as plates and tubes, incorporating defects and statistical fluctuation, have been generated, recorded for further comparison and afterwards processed to improve their contrast. The developed algorithm which, generates processes and plots the images has been written in Fortran 90 language. As the resulting final images exhibit the expected improvements, it therefore seemed worthwhile to carry out further tests with actual experimental radiographies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Depinning of the ferroelectric domain wall in congruent LiNbO{sub 3}

The high coercive field, E{sub c}, of congruent LiNbO{sub 3} can be reduced by doping with Mg or Zn atoms, or by increasing the temperature above a threshold value. The physical origin for this reduction is not currently understood. Here, density functional theory calculations illustrate the atomic origin of the change in the switching field of the congruent LiNbO{sub 3}. They show that the high E{sub c} in the congruent LiNbO{sub 3} is a result of niobium antisite atoms on the lithium sublattice, pinning the motion of the domain walls. Thus, the healing of antisites by diffusion can significantly reduce the coercive field. In addition, this work demonstrates that the migration of these niobium antisites can be enhanced by doping or by changing the temperature. Thus, the depinning process of the congruent LiNbO{sub 3} is understood by the migration of the niobium antisite defect across the domain wall.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Sci-Sat AM: Radiation Dosimetry and Practical Therapy Solutions - 07: A mould room in a box – 3D scanning and printing technology in the radiotherapy clinic

Purpose: We describe the process by which our centre is currently implementing 3D printing and scanning technology for treatment accessory fabrication. This technology can increase efficiency and accuracy of accessory design, production and placement during daily use. Methods: A low-cost 3D printer and 3D optical scanner have been purchased and are being commissioned for clinical use. Commissioning includes assessing: the accuracy of the 3D scanner through comparison with high resolution CT images; the dosimetric characteristics of polylactic acid (PLA) for electron beams; the clinical utility of the technology, and; methods for quality assurance. Results: The agreement between meshes generated using the 3D scanner and CT data was within 2 millimeters for an anthropomorphic head phantom. In terms of electron beam attenuation, 1 centimetre of printed PLA was found equivalent to 1.17 cm of water. In proof-of-concept tests, several types of treatment accessories have been prototyped to date that will benefit from this technology. These include electron and photon bolus for areas with complex surface contours including the ear for electron treatments, the extremities for photon treatments and lead shielding for orthovoltage treatments. Imaging with CT and x-ray showed minimal defects, which will have no significant clinical impact. Geometric fidelity and fit to volunteers and patients was found to be excellent. Conclusions: 3D Printing and scanning can increase efficiency in the clinic for treatments requiring custom accessories. Customized boluses and shielding had excellent fit and reduced uncertainty in positioning.

60 APPLIED LIFE SCIENCES↗

Chapter 9: Human Behavior Dynamics in Sustainability

Human behavior dynamics and actions play a direct and significant role in shaping pathways toward sustainability, resulting in many sustainability challenges. A social dilemma arose when a hypothetical Colorado rural town closed down most of its medicine take-back stations as a result of reduced tax revenue. The current discourse discusses a scenario in which an individual "plays" against everyone else concerning whether to drive to the take-back station to dispose of unused medication (i.e., cooperating) or to flush it or throw it in the landfill (i.e., defecting). Using the structure of the pay-off matrix, this study analyzed unwanted medication disposal from a social dilemma perspective to provide insight into an individual's motivations to cooperate or defect and techniques for encouraging cooperation. The pay-off matrix encompasses four scenarios, namely, win-win when everyone cooperates, you're the sucker when only the individual cooperates, free rider when only the individual defects, and the tragedy of the commons when everyone defects. Reasons for an individual to cooperate include sharing the high moral value with everyone else, valuing social conformity, and taking great pride in doing the right thing, even when cooperating is costly. On the other hand, the individual who defects believes that cooperating will likely make little difference. The individual is selfish or insufficiently motivated by altruism and feels that the bad action will not get caught. When everyone defects, it likely results from participants not wanting to be a "sucker" and a lack of accountability (e.g., no punishment) associated with bad behavior. One solution to the free-rider problem is to appeal to the free rider's altruism. It is important to convince the individual that doing things for the benefit of others can also benefit themselves. Furthermore, a way to fix the social dilemma is to make the defectors pay for their actions that cause the negative externality (i.e., town water contaminated with pharmaceutical chemicals from unwanted medications). The higher the financial incentive for cooperative behavior, the lower the defecting propensity. By including punishment (e.g., discipline and penalty), people tend to defect less often, and highly cooperative outcomes emerge.

ENERGY PLANNING, POLICY, AND ECONOMY↗

Nb 3 Sn Superconducting RF Cavities: R&D Progress at Fermilab and Opportunities

Nb 3 Sn becomes superconducting at twice as high temperature as our standard SRF material niobium. This allows us to efficiently operate Nb 3 Sn cavities at 4.4 K instead of the usual 2 K. This reduces cryogenic costs and even makes it possible to use a cryocooler instead of a large, complex cryogenic plant. The superheating field H sh of Nb 3 Sn is twice that of niobium. H sh is thought to be the ultimate limit for a defect-free superconductor. Nb 3 Sn cavities being made today are still about a factor of 4 away from this ultimate limit, but R&D has been leading to substantial progress towards this goal.

43 PARTICLE ACCELERATORS↗

Nitridation of atomically smooth (111) diamond surfaces using a low temperature Penning plasma discharge

Diamond is a material with a wide band gap that can host a variety of isolated paramagnetic defects, called “color centers”1. These color centers have attractive optical and magnetic properties suitable for quantum applications including quantum computing, nanophotonics and quantum sensing. The most common one is the negatively charged nitrogen vacancy (NV) color center. For quantum sensing, it is desirable to reduce the distance between the NV center and the analyte by using shallow color centers in order to increase sensitivity. In this context, the diamond surface termination is especially critical. The appropriate surface termination is required to stabilize the color centers and mitigate surface magnetic noise. The nitrogen termination of diamond has been postulated as highly desirable for the NV color center. The goal of this project is to take advantage of an electron beam-generated ExB low temperature plasma developed by the Princeton Collaborative Low Temperature Plasma Research Facility (PCRF) at the Princeton Plasma Physics Laboratory (PPPL) to nitridate the surface of (100) diamond single crystals with minimal surface damage. In this reactor, the use of a magnetized plasma enables gentle processing of materials sensitive to ion damage. This is in strong contrast to radiofrequency plasma processing reactors which are known to etch and sputter the surface. XPS measurements indicate the incorporation of nitrogen and oxygen atoms at the surface in similar amounts. XAS measurements confirm the nitridation and indicate that the nitrogen termination is different from the nitrogen termination obtained using radiofrequency plasma treatment4. The combination of these results indicates the formation of amid species at the (100) diamond surface that are promising for the stabilization of NV centers for quantum sensing.

36 MATERIALS SCIENCE↗

Molecular dynamics simulation of vacancy and void effects on strain-induced martensitic transformations in Fe-50 at.% Ni model concentrated solid solution alloy

Strain-induced martensitic transformations can improve the strength and ductility of some face centered cubic (FCC) metals and alloys. Irradiation-induced defects such as vacancies, dislocation loops, and voids activate martensitic transformations over a wider range of mechanical loading conditions than in pristine material. Furthermore, the mechanisms underlying irradiation-enabled martensite transformations remain unclear. In this work, we use molecular dynamics simulations to study the effect of vacancies and voids on strain-induced martensitic transformations in a model concentrated solid solution alloy Fe-50 at.% Ni. It has been found that single vacancies have no resolvable effect on the transformation because they reduce the stacking fault energy by a relatively insignificant margin and do so only if the vacancy is located on the stacking fault plane. Voids, however, activate the martensite transformation through shear strain accumulation around the void due to dislocation pileup. The larger the void, the more pronounced this effect.

36 MATERIALS SCIENCE↗