Search NASA⌕ Search

SEARCH · Search NASA

Results for “Space Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

High voltage surface-charged environment test results from space flight and ground simulation experiments

Surface-charged particle interactions were investigated for a small 100 sq cm conventionally constructed solar cell panel in ground facilities and in a flight experiment. The flight data substantiated preflight ground test results showing that at high positive biases the cover glass over each solar cell enhances the coupling current and that, at high negative biases, arcs create large transients in the coupling current.

Grier, N. T.↗

Space plasma laboratory - Experiment in simulated ionospheric plasma

Several experiments with simulated ionospheric plasma were performed in the Johnson Space Center's large (17 m diameter x 27 m height) vacuum chamber. Two of these, the RF discharge and the electron-beam plasma discharge, are described here. The RF experiment involved measurement of the loading on a 5 m dipole and a 5 m loop antenna caused by the presence of a plasma. The results indicate that when the RF frequency is near the electron gyro frequency a self-sustained plasma discharge is set up and the real part of the complex antenna impedance increases. The beam-plasma experiment was carried out to study a discharge produced by an electron beam with an energy of about 1 keV when the electron beam was injected parallel to the ambient magnetic field. As the beam current was raised to a critical level, a spontaneous transition occurred whereby a luminous halo was formed around the electron beam indicating a sustained discharge.

Konradi, A.↗

Mobile work station concept for assembly of large space structures (zero gravity simulation tests)

The concept presented is intended to enhance astronaut assembly of truss structure that is either too large or complex to fold for efficient Shuttle delivery to orbit. The potential of augmented astronaut assembly is illustrated by applying the result of the tests to a barebones assembly of a truss structure. If this structure were assembled from the same nestable struts that were used in the Mobile Work Station assembly tests, the spacecraft would be 55 meters in diameter and consist of about 500 struts. The struts could be packaged in less than 1/2% of the Shuttle cargo bay volume and would take up approximately 3% of the mass lift capability. They could be assembled in approximately four hours. This assembly concept for erectable structures is not only feasible, but could be used to significant economic advantage by permitting the superior packaging feature of erectable structures to be exploited and thereby reduce expensive Shuttle delivery flights.

Heard, W. L., Jr.↗

Physics of auroral arc formation; Proceedings of the Chapman Conference on Formation of Auroral Arcs, Fairbanks, AK, July 21-25, 1980

The results of satellite, balloon-borne, and ground-based observations of auroral phenomena are discussed in terms of the morphology of auroral arcs and the behavior and characteristics of auroral electrons and ions. Further attention is given to auroral electric fields and field aligned currents, and to the development of models of auroral potential structures and energization of auroral particles. A simulation of space plasma phenomena is presented, along with numerical simulations of auroral potential structures and related phenomena, including the V-potential double layers and auroral arc deformations, and a simulation of auroral arcs. Plasma waves observed on auroral field lines and in laboratory conditions are reported, and theoretical studies of waves and turbulence in auroral plasmas are described.

Akasofu, S.-I.↗

Review of NASA's (National Aeronautics and Space Administration) Numerical Aerodynamic Simulation Program

NASA has planned a supercomputer for computational fluid dynamics research since the mid-1970's. With the approval of the Numerical Aerodynamic Simulation Program as a FY 1984 new start, Congress requested an assessment of the program's objectives, projected short- and long-term uses, program design, computer architecture, user needs, and handling of proprietary and classified information. Specifically requested was an examination of the merits of proceeding with multiple high speed processor (HSP) systems contrasted with a single high speed processor system. The panel found NASA's objectives and projected uses sound and the projected distribution of users as realistic as possible at this stage. The multiple-HSP, whereby new, more powerful state-of-the-art HSP's would be integrated into a flexible network, was judged to present major advantages over any single HSP system.

Source record↗

Reliability and maintenance simulation of the Hubble Space Telescope

An analytical approach is presented which was developed and implemented at MSFC specifically for the Space Telescope Program to provide comparisons of critical item failures, system downstates, on-orbit servicing versus return for ground maintenance, overall system downtime, and to obtain a measure of expected uptime for science functions.

Pizzano, F.↗

Simulating Scenes In Outer Space

Multimission Interactive Picture Planner, MIP, computer program for scientifically accurate and fast, three-dimensional animation of scenes in deep space. Versatile, reasonably comprehensive, and portable, and runs on microcomputers. New techniques developed to perform rapidly calculations and transformations necessary to animate scenes in scientifically accurate three-dimensional space. Written in FORTRAN 77 code. Primarily designed to handle Voyager, Galileo, and Space Telescope. Adapted to handle other missions.

Callahan, John D.↗

Modem simulations for possible use in Space Station

Two candidate modem structures for use in the Space Station Multiple-Access Communications System were simulated using a software simulation package to obtain symbol error-rate curves. These systems represent an evolutionary QPSK-through-8 PSK modulation format for the input data streams. It was found that the use of phase-staggered QPSK modems would give lower expected implementation loss than a modem based upon the polarity-Costas-loop method. However, the latter would represent a simpler hardware investment to realize the modem structure for both QPSK and 8 PSK.

Horan, Stephen↗

The Gas-Grain Simulation Facility (GGSF) for Space Station Freedom - Design concept

The GGSF is specifically designed to accommodate micro-g experiments that investigate long-term effects and interactions between submicron to centimeter size particles. The paper introduces the science disciplines and the type of experiments that are currently envisioned for the GGSF. The broad range of science and technology requirements are discussed, and the Space Station Freedom (SSF) accommodations, and available utilities are reviewed. Based on the requirements and the available accommodations, a facility conceptual design is outlined. The required subsystems are listed, and the rationale and considerations that lead to the selected approach, delineated. The present GGSF concept is that of a modular facility system comprising a flight rack and an array of fully compatible and interchangeable subsystems that are designed to meet a diverse set of science requirements. The modularity allows for future upgrade of various subsystems as technology evolves and for introduction of new modules to accommodate new or different experiments. These features are essential for a facility that is expected to be in service on board the SSF for 10 years or more.

Gat, N.↗

Studies on flower initiation of Super-Dwarf wheat under stress conditions simulating those on the Space Station, Mir

Super-Dwarf wheat plants were grown in growth chambers under 12 treatments with three photoperiods (18 h, 21 h, 24 h) and four carbon dioxide (CO2) levels (360, 1,200, 3,000 and 7,000 micromoles mol-1). Carbon dioxide concentrations affected flower initiation rates of Super-Dwarf wheat. The optimum CO2 level for flower initiation and development was 1,200 micromoles mol-1. Super-optimum CO2 levels delayed flower initiation, but did not decrease final flower bud number per head. Longer photoperiods not only accelerated flower initiation rates, but also decreased deleterious effects of super-optimum CO2. Flower bud size and head length at the same developmental stage were larger under longer photoperiods, but final flower bud number was not affected by photoperiod.

Mir Project↗

Mission simulation as an approach to develop requirements for automation in Advanced Life Support Systems

This paper examines mission simulation as an approach to develop requirements for automation and robotics for Advanced Life Support Systems (ALSS). The focus is on requirements and applications for command and control, control and monitoring, situation assessment and response, diagnosis and recovery, adaptive planning and scheduling, and other automation applications in addition to mechanized equipment and robotics applications to reduce the excessive human labor requirements to operate and maintain an ALSS. Based on principles of systems engineering, an approach is proposed to assess requirements for automation and robotics using mission simulation tools. First, the story of a simulated mission is defined in terms of processes with attendant types of resources needed, including options for use of automation and robotic systems. Next, systems dynamics models are used in simulation to reveal the implications for selected resource allocation schemes in terms of resources required to complete operational tasks. The simulations not only help establish ALSS design criteria, but also may offer guidance to ALSS research efforts by identifying gaps in knowledge about procedures and/or biophysical processes. Simulations of a planned one-year mission with 4 crewmembers in a Human Rated Test Facility are presented as an approach to evaluation of mission feasibility and definition of automation and robotics requirements.

NASA Discipline Number 61-10↗

Space Weathering of Silicates Simulated by Successive Laser Irradiation: in Situ Reflectance Measurements of Fo90, Fo99+, and SiO2

Pulsed-laser irradiation causes the visible-near-infrared spectral slope of olivine (Fo90 and Fo99+) and SiO2 to increase (redden), while the olivine samples darken and the SiO2 samples brighten slightly. XPS analysis shows that irradiation of Fo90 produces metallic Fe. Analytical SEM and TEM measurements confirm that reddening in the Fo90 olivine samples correlates with the production of "nanophase" metallic Fe (npFe0) grains, 20-50 nm in size. The reddening observed in the SiO2 sample is consistent with the formation of SiO or other SiOx species that absorb in the visible. The weak spectral brightening induced by laser irradiation of SiO2 is consistent with a change in surface topography of the sample. The darkening observed in the olivine samples is likely caused by the formation of larger npFe0 particles, such as the 100-400 nm diameter npFe0 identified during our TEM analysis of Fo90 samples. The Fo90 reflectance spectra are qualitatively similar to those in previous experiments suggesting that in all cases formation of npFe0 is causing the spectral alteration. Finally, we find that the accumulation of successive laser pulses cause continued sample darkening in the Vis-NIR, which suggests that repeated surface impacts are an efficient way to darken airless body surfaces.

Airless planetary bodies↗