Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural Effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Effects of Ti substitution on structural and magnetic properties of Zn–Mn ferrospinels

Highlights: ► Novel system ZnMn{sub 1−x}Ti{sub x}FeO{sub 4} synthesized by sol–gel route. ► Nanocrystalline materials. ► Magnetic materials. - Abstract: Nanocrystalline ZnMn{sub 1−x}Ti{sub x}FeO{sub 4} (1.0 ≥ x ≥ 0) ferrites were prepared by sol–gel route. Formation of single phase cubic spinel structure for all the compositions was confirmed from their X-ray diffraction patterns. The lattice parameter shows an increasing trend with the increase in Ti content. These ferrite samples existed as crystalline nanoparticles of about 30–40 nm size as observed from transmission electron microscopy (TEM) technique. EDAX analysis indicated that the concentration of different elements in different compositions is in close agreement with the starting concentrations. Infrared spectra showed two main absorption bands in the range 400–800 cm{sup −1} arising due to tetrahedral (A) and octahedral (B) stretching vibrations. The magnetic studies indicated that, the ferrimagnetic behavior increases with titanium substitution.

36 MATERIALS SCIENCE↗

Effect of calcination temperature on structural and photocatalyst properties of nanofibers prepared from low-cost natural ilmenite mineral by simple hydrothermal method

Graphical abstract: - Highlights: • Nanofibers were prepared from low-cost ilmenite mineral via simple hydrothermal. • High photocatalyst nanofibers were prepared via post heat treatment method. • The nanofibers calcined at 100–700 °C for 2 h maintained nanofiber structure. • The calcined nanofibers at 400 °C showed the highest photocatalytic activity. - Abstract: Titanate nanofibers were synthesized via the hydrothermal method (120 °C for 72 h) using natural ilmenite mineral (FeTiO{sub 3}) as the starting material. The samples were characterized by X-ray diffraction (XRD), X-ray fluorescent (XRF), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Brunauer–Emmett–Teller (BET) for specific surface area. The nanofibers were 20–90 nm in diameter and 2–7 μm in length. The as-synthesized nanofibers calcined at 300–400 °C showed TiO{sub 2} (B) whereas the nanofibers calcined at 500 °C revealed a mixture of two phases of TiO{sub 2} (B) and anatase. The nanofibers calcined at high temperature of 600–1000 °C showed a mixture of tri-crystalline of anatase, rutile, and Fe{sub 2}O{sub 3}. The rutile phase increased with increasing calcination temperature. The nanofibers calcined at 300–700 °C maintained their structure while the morphology of the nanofibers calcined at 800–1000 °C transformed into submicron rod-like structure. This increase of calcination temperature led to the phase transformation from thermodynamically metastable anatase to the most stable form of rutile phase. The crystallite size of prepared samples increased with increasing calcination temperature. Interestingly, with increasing calcination temperature, the absorption edge of the prepared samples shows an obvious shift to visible light region due to the change of crystallite phase and increased crystallite size. Therefore, the band gap energy of the prepared samples became narrower with increasing calcination temperature. Furthermore, the photocatalytic activity of the nanofibers calcined at 400 °C for 2 h was found to be not merely higher than those of the commercially available TiO{sub 2} nanoparticles powders (P-25, JRC-01, and JRC-03) but also the highest of all the samples in this study.

36 MATERIALS SCIENCE↗

Effect of Zn doping on structural, magnetic and dielectric properties of LaFeO{sub 3} synthesized through sol–gel auto-combustion process

Graphical abstract: - Highlights: • We have synthesized the samples of LaFe{sub 1−x}Zn{sub x}O{sub 3} (0 ≤ x ≤ 0.3) using sol–gel auto-combustion process. • The doping of Zn{sup 2+} hugely enhances the dielectric constant (ε′) and it shows a colossal value. • The parent compound LaFeO{sub 3} does not show any relaxation peak, but the substitution of Zn at Fe{sup 3+} site brings the relaxation in the system. • The system shows a peak behavior thereby giving the Debye like dipolar relaxation response. - Abstract: We have studied the structural and dielectric properties of nano-crystalline LaFe{sub 1−x}Zn{sub x}O{sub 3} (0 ≤ x ≤ 0.3) pervoskite samples synthesized through sol–gel auto-combustion technique. X-ray diffraction and FTIR spectroscopy are used to confirm the single phase characteristics. Microstructural features are investigated using scanning electron microscope and compositional analysis is performed through energy dispersive spectroscopy. The average grain sizes, calculated from the Scherrer formula, lie in the range below 30 nm. The hysteresis (M-H) curves display a weak magnetic order and a shift in the hysteresis loops. Dielectric response has been discussed, in the framework of “universal dielectric response” model. The value of dielectric constant (ε′) increases drastically on Zn doping. The dielectric loss factor (ε″) shows Debye like dipolar relaxation behavior. The observed peaks in loss factor (ε″) are attributed to the fact that a strong correlation between the conduction mechanism and the dielectric behavior exists in ferrites.

36 MATERIALS SCIENCE↗

Microstructural, optical and ethanol sensing properties of sprayed Li-doped Mn{sub 3}O{sub 4} thin films

Highlights: • Li doped Mn{sub 3}O{sub 4} was grown on glass substrate via the low cost effective spray pyrolysis technique. • Li doping notably tuned the optical band gap of Mn{sub 3}O{sub 4} thin film. • The incorporation of Li ions was found to provide an enhancement of ethanol sensitivity. - Abstract: Lithium-doped manganese oxide thin films have been deposited onto glass substrate by the spray pyrolysis technique. The effect on structural, morphological, optical and ethanol sensitivity properties of the films with different Li concentrations was investigated. The X-ray diffraction (XRD) studies of Li doped Mn{sub 3}O{sub 4} thin films revealed polycrystalline tetragonal structure with lattice parameters: a = 5.73 Å and c = 9.46 Å. The most intense band at 653.26 cm{sup −1} observed in room temperature Raman spectrum of all films corresponds to the tetragonal crystal structure of Mn{sub 3}O{sub 4}. Optical band gap energy was found to vary in the range of 2.23–2.82 eV by an increase in Li-doping concentration up to 15%. The resistance based gas sensing measurements showed a clear response already at a low ethanol concentration of 0.1%. The films showed promising ethanol sensing behavior; especially the sample doped with 3% of lithium exhibits the most excellent sensing performance.

36 MATERIALS SCIENCE↗

Enhanced rate performance of Li3V2(PO4)3/C cathode by an improved rheological phase assisted microwave method

Highlights: • Rheological phase assisted microwave can utilize both advantages of two methods. • Polyethylene glycol was used as both rheological medium and carbon precursor. • 101.8 mA h g{sup −1} of specific capacity was obtained at 50 C rates. - Abstract: In this study, high-rate Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C composite is successfully synthesized via an improved rheological phase assisted microwave method using polyethylene glycol as both rheological medium and carbon precursor. The relatively uniform Li{sub 3}V{sub 2}(PO{sub 4}){sub 3} particles are encapsulated in amorphous carbon architecture to form core-shell structure, providing effective electron and ion transport. When used as a cathode material in lithium ion battery, the Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C composite displays a maximum discharge capacity of 101.8 mA h g{sup −1} at 50 C charge/discharge rate and still possesses 98.3% of capacity retention after 100 cycles, demonstrating superior rate capability and excellent cycling stability when compared with bare Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}. The observed electrochemical performance could be attributed to uniform coated-carbon pyrolysis from polyethylene glycol rheological phase precursor and small Li{sub 3}V{sub 2}(PO{sub 4}){sub 3} pristine particles synthesized by the fast microwave heating route.

36 MATERIALS SCIENCE↗

Infinitely rugged intra-cage potential energy landscape in metallic glasses caused by many-body interaction

The absence of translational symmetry in glassy materials poses a significant challenge in establishing effective structure-property relationships in real space. Consequently, the potential energy landscape (PEL) in phase space is widely utilized to comprehend the complex phenomena in glasses. The classical PEL features a two-scale profile comprising mega-basins and sub-basins, corresponding to α-relaxations (e.g. glass transition) and β-relaxations (e.g. local cage-breaking atomic rearrangements), respectively. Recent studies, however, reveal that sub-basins are not smooth and contain finer structures, the origins of which remain elusive. Here we probe the smoothness of sub-basin bottoms in glasses' PEL by introducing small intra-cage cyclic loading and then measuring the net changes in atomic-level stresses. Compared to glasses with pair interaction, glasses with many-body interaction exhibit orders-of-magnitude larger and loading-dependent stress changes even before the first cage-breaking event takes place, which reflect much more feature-rich sub-basins. We further demonstrate this stark contrast stems from the spatial distribution of individual atom's constraining force field. Specifically, at vanishing perturbations, many-body interactions disrupt the positive-definite synchrony in energy variations of the perturbed atom and the whole system, causing inherently less confined atomic responses and infinitely rugged sub-basins. The implications of these findings for the selective addition or removal of fine structures in the PEL and the subsequent tuning of glassy materials' responses to external stimuli are also explored.

36 MATERIALS SCIENCE↗

Hexagonal boron nitride (h-BN) irradiated with 140 MeV protons

Here, hexagonal boron nitride was irradiated with 140 MeV protons to a fluence of ~6 10 20 p/cm 2 at T irr ~200 °C. Isotropic graphite was also irradiated alongside h-BN under similar conditions and fluence to enable direct comparison of the two similar structures. The effects of proton irradiation on dimensional stability and microstructure were studied using precision dilatometry and energy dispersive Xray diffraction techniques revealing by direct comparison to graphite that h-BN can better resist radiation damage from bombardment when irradiated with protons impinging normal to the crystallographic planes or along the crystallographic c-axis. X-ray diffraction experiments also revealed a preferred orientation of the crystallites in bulk samples near the sample surface, an orientation influenced by irradiation. Thermal studies using differential scanning calorimetry and thermogravimetric analysis to 740 °C, augmented by precision dilatometry, provided evidence of subtle phase transitions attributed to residual w-BN in the matrix. Irradiation appears to induce shifting of such transitions.

36 MATERIALS SCIENCE↗

Effect of deuteration on the structural and magnetic properties of CuF{sub 2}(H{sub 2}O){sub 2}(pyrazine).

The strongest magnetic exchange interactions in the quasi-two dimensional coordination polymer CuF{sub 2}(H{sub 2}O){sub 2}(pyz) (pyz=pyrazine), lie within the CuF{sub 2}(H{sub 2}O){sub 2} plane and involve F{hor_ellipsis}H-O hydrogen bonds. In order to better understand this novel magnetic exchange pathway, the fully deuterated derivative of this complex was prepared. The structural and magnetic properties of this isotopically substituted derivative are reported. A slight contraction of the unit cell and reduction in the Neel temperature was observed.

08 HYDROGEN↗

Characterizing leaf-scale fluorescence with spectral invariants

Sun-induced chlorophyll fluorescence (SIF) is increasingly recognized as a non-destructive probe for tracking terrestrial photosynthesis. Emerging developments in spectral invariants theory provide an innovative and efficient approach for representing SIF radiative transfer processes at the canopy scale. However, modeling leaf-scale fluorescence based on the spectral invariants properties (SIP) remains underexplored. In this study, the spectral invariants theory is employed for the first time to model the leaf-scale total, backward and forward fluorescence (leaf-SIP SIF). The leaf-SIP SIF model separates the leaf-scale radiative transfer process into two distinct components: the wavelength-dependent one associated with leaf biochemical properties, and the wavelength-independent component linked to leaf structural characteristics. The leaf structure-related effects are characterized by two spectrally invariant parameters: the photon recollision probability (p) and the scattering asymmetry parameter (q), which are parameterized using the directly measurable leaf dry matter. Evaluation against field measurements shows that the proposed leaf-SIP SIF model has a good performance, with coefficient of determination (R 2 ) of 0.89, 0.89, 0.90 and root mean squared errors (RMSE) of 1.28, 0.69, 0.74 Wm -2 µm -1 sr -1 , respectively for the total, backward, and forward fluorescence (660–800 nm). The leaf-SIP SIF model with a more concise formulation demonstrates comparable performance with the widely used Fluspect model. Further, the leaf-SIP SIF model provides a simple and efficient approach for simulating leaf-scale fluorescence, with the potential to be integrated into a unified SIP-based model framework for simulating the radiative transfer processes across the soil-leaf-canopy-atmosphere continuum.

59 BASIC BIOLOGICAL SCIENCES↗

Grain size induced monoclinic ( Cm ) to rhombohedral ( R3c ) transformation in sodium potassium bismuth titanate ceramics

Here, grain size effect on structure, remnant polarization and piezoelectric constant of lead-free Na 0.4 K 0.1 Bi 0.5 TiO 3 ceramics with grain sizes of 0.58, 0.85, 1.19 and 1.83 pm was investigated. Synchrotron X-ray diffraction in combination with Rietveld refinement was used to examine the structural changes. We have reported an existence of monoclinic ( Cm ) phase at room temperature and discussed the grain size (1.83 → 0.58 μ m) induced structural transformation ( Cm → R3c ) through both intrinsic polarization rotation and adaptive phase theory. Polarization vector in the (11¯0) pc monoclinic plane rotates towards [111] pc with the reduction of grain size. Better domain alignment and large polar variants results enhanced remnant polarization and piezoelectric constant in 1.83 μ m sample.

36 MATERIALS SCIENCE↗

Mesoporous MoO 2 thin films for high rate Li + storage: Effect of crystallinity and porous structure

MoO 2 has attracted much recent attention as a high capacity energy storage material. While much of the current work on MoO 2 has been focused on the high capacity four-electron reduction, this reaction is limited to slow charging process due to the large volume change and phase transitions involved. In this study we focus on one-electron insertion reactions and demonstrate that ordered mesoporous thin films of MoO 2 can show signatures of pseudocapacitive charge storage. Mesoporous MoO 2 (mp-MoO 2 ) thin films were treated at different temperatures between 350 and 700 °C to explore the role of crystallinity and nanoscale structure on charging dynamics. The porosity and pore size decreased while the crystallinity and grain size increased as the calcination temperature increased. Materials processed at 600 °C showed the best electrochemical performance due to an optimized combination of high crystallinity and small grain size. These materials could be charged and discharged in 24 s while still achieving a Li + storage capacity of 158 mAh/g. While such thin film systems do not constitute a practical energy storage device, the work here provides structural design parameters for the production of future bulk nanoporous materials.

25 ENERGY STORAGE↗

The effect of heat treatment on structural and electronic properties of niobium nitride prepared by a thermal diffusion method

NbN coatings are prepared onto Nb substrate by thermal diffusion at high temperatures. The formation of NbN coating by thermal diffusion was studied in the range of 1250-1500 °C at constant nitrogen background gas pressure (1.3x10 -3 Pa) and processing time (180 min). The electronic and crystal structures of the NbN coatings were investigated. It was found that nitrogen diffuses into Nb forming the Nb-N solid solution (bcc) a-NbN phase that starts to appear above 1250 °C. Increasing the processing temperature gives richer a-phase concentration. Besides, X-ray absorption spectroscopy (XAS) was performed to study the electronic structure of the NbN layer. The results of the electronic structural study corroborate the crystal structural analysis. The Nb M 3,2 edge X-ray absorption spectroscopy (XAS) spectrum shows strong temperature dependence. At the highest processing temperature (1500 °C), the number of d holes increased. Nitrogen diffusion into Nb is resulting to increase electrostatic interaction between d electron and core hole. Lastly, for the studied conditions, only the α-NbN was observed in the X-ray diffraction patterns.

36 MATERIALS SCIENCE↗

Nanowires for Photonics

All-photonic integrated circuits are promising platforms for future systems beyond the limitation of Moore's law. Over the last several decades, one-dimensional (1D) nanowires have demonstrated great potential in photonic circuitry because of their unique 1D structure to effectively generate and tightly confine optical signals as well as easily tunable optical properties. In this Review, we categorize nanowires based on the optical properties (i.e., semiconducting, metallic, and dielectric nanowires) for their potential photonic applications (as light emitters or plasmonic and photonic waveguides). We further discuss the recent efforts in integration of nanowire-based photonic elements toward next-generation optical information processors. However, there are still several challenges remaining before the nanowires are fully utilized as photonic building blocks. In conclusion, the scientific and technical challenges and outlooks are provided to indicate the future directions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Solvent Quality on Structure and Dynamics of Lignin in Solution

The conversion of lignin into useful chemicals and monomers requires that different linkages connecting monomers are exposed to the catalytic sites. As most conversion processes are expected to occur in the liquid phase, it is important to understand the structure and dynamics of lignin in solution. Here, we have examined the structure and dynamics of hardwood- and softwood-derived lignin model compounds with 61 monomers in methanol/water solution.

09 BIOMASS FUELS↗

Investigation of the Amide Proton Solvent Exchange Properties of Glycosaminoglycan Oligosaccharides

One-dimensional 1 H NMR experiments were conducted for aqueous solutions of glycosaminoglycan oligosaccharides to measure the amide proton temperature coefficients, activation energy barriers for solvent exchange, and evaluate the effect of pH on the solvent exchange properties. A library of mono- and oligosaccharides was prepared by enzymatic depolymerization of amide-containing polysaccharides and by chemical modification of heparin and heparan sulfate saccharides including members that contain a 3- O -sulfated glucosamine residue. The systematic evaluation of this saccharide library facilitated assessment of the effects of structural characteristics, such as size, sulfation number and site, and glycosidic linkage, on amide proton solvent exchange rates. Charge repulsion by neighboring negatively charged sulfate and carboxylate groups was found to have a significant impact on the catalysis of amide proton solvent exchange by hydroxide. Furthermore, this observation leads to the conclusion that solvent exchange rates must be interpreted within the context of a given chemical environment. On their own, slow exchange rates do not conclusively establish the involvement of a labile proton in a hydrogen bond and additional supporting experimental evidence such as reduced temperature coefficients is required.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electric Field Effects on Water and Ion Structure and Diffusion at the Orthoclase (001)–Water Interface

Understanding the electrochemical properties of mineral–water interfaces tends to rely upon electrical double layer (EDL) models, but these models are based on the assumption that electrostatic equilibrium is constantly maintained. In reality, interfacial reactions, ion diffusion, and their electrochemical signatures are based in nonequilibrium conditions of locally or globally imbalanced electrical fields where current EDL models have limited purview. In this work, we performed molecular dynamics (MD) simulations of the orthoclase (001) surface in contact with a 1 M NaCl aqueous solution under various electric fields, to explore the interplay between EDL structure and dynamics when perturbed by electric fields of different direction and strength, by confinement, and by different distributions of structural surface charge. The simulations showed that confinement between two opposing (001) surfaces led to the development of an induced field when the applied field was perpendicular to the surfaces and, as a result, to ionic diffusion coefficients that were independent of electric field strength. In contrast, when the applied field was parallel to the surfaces, confinement resulted in ionic diffusion coefficients that were more strongly dependent on the magnitude of the electric field than in bulk water. Differences in the density and distribution of aluminol groups on the two surfaces had a significant impact on how the interfacial structure and dynamics varied in the presence of an electric field. Notably, these differences resulted in an electro-osmotic flow with opposite directions at the two surfaces under parallel applied electric field. Overall, the MD simulations highlighted the importance of considering atomic-level structure and heterogeneities when developing models of the electrochemical properties of mineral–water interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Pressure on Crystal Structure and Phonon Density of States of FeSi

The strongly correlated material FeSi displays several unusual thermal, magnetic, and structural properties under varying pressure-temperature (P-T) conditions. It is a potential thermoelectric alloy and a material with several geochemical implications as a possible constituent at the Earth's core-mantle boundary (CMB). Previous theoretical studies predicted a pressure-induced B20-B2 transition at ambient temperature below 40 GPa; however, experimentally, the structural transition is observed only at high P-T conditions. In this study, we have performed high-pressure powder X-ray diffraction (XRD) up to 90 GPa and Nuclear Resonant Inelastic X-ray Scattering (NRIXS) measurements up to 120 GPa to understand the phase stability and lattice dynamics. Our study provides evidence for a non-hydrostatic stress-induced B20-B2 transition in FeSi at around 36 GPa. We deduced the Fe partial phonon density of states (PDOS) and thermal parameters from NRIXS measurements up to 120 GPa and compared them with density functional theory (DFT) calculations. Furthermore, the computations show pressure-induced metallization and the band gap closing around 12 GPa.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗