Search NASA⌕ Search

SEARCH · Search NASA

Results for “Volatile analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Vapor Extraction Well Performance and Recommendations for Future Soil Vapor Extraction Activities at the A-014 Outfall

The vadose zone near the A-014 Outfall contains residual volatile organic compounds that serve as a potential source for groundwater contamination. Since 1995 active soil vapor extraction has been an integral part of the corrective actions at this facility. Currently two separate soil vapor extraction systems are being used to remove contamination in the vapor phase from the subsurface. The 782-3M soil vapor extraction unit was deployed in April of 1995 and the A-014 Mobile #3 unit was deployed in January of 2009. The objective of this investigation is to evaluate the performance of individual wells associated with these systems and provide recommendations on possible optimizations to these systems. Options that are considered include continuation of active extraction, transition to a low-energy soil vapor extraction treatment, or abandon nonperforming wells. The scope of the investigation examined the eighteen (18) vadose zone wells that are associated with the ongoing Resource Conservation and Recovery Act corrective action program within A/M Area. During the evaluation process, individual wells were isolated and purged for a standard period using the existing soil vapor extraction system. Following the purge period, vapor samples were collected intermittently over the following 24–72-hour period. The objective of the sampling activity was to collect sufficient data to estimate the mass flow rate of contaminants from the individual extraction wells. Subsequent analysis then evaluated and ranked extraction performance to provide recommendations on the viability, operational scheme, and applicability of low energy soil vapor extraction.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Topographically Induced Thermal Effects on Lunar Hydrogen Distributions: Correlated Observations from the LRO LEND and LOLA Instruments

The question of whether water exists on the Moon's surface has long been an enigma to Lunar researchers. Largely, this was due to the thermally extreme lunar surface environment that would seem to preclude any long term maintenance, manufacture, transport or accumulation of hydrogen (H) volatiles over most of the lunar surface. As a result, for many years the cold permanent shadow regions (PSR) in the bottoms of craters near the lunar poles appeared to provide the basic conditions at least for maintenance of lunar hydrogen. Importantly, recent discoveries indicate that there is some hydrogen at the poles. However, the picture of the lunar hydrogen budget may be more complex than the PSR hypothesis has suggested. This evidence comes from observations by the Lunar Exploration Neutron Detector (LEND) onboard the Lunar Reconnaissance Orbiter (LRO) that inclici1te 1) some H concentrations lie outside PSR and 2) though a few of the larger PSR's have high hydrogen, PSR does not appear to be an independent factor influencing the large-scale suppression of polar epithermals observed by LEND and the Lunar Prospector Neutron Spectrometer. In this research we investigate the possibility that the thermal contrast between pole-facing and equator facing-slopes is a factor influencing the surface distributions of lunar H. We perform this bulk correlated observation and study by developing a thermal proxy from slope data of the Lunar Orbiting Laser Altimeter (LOLA) digital elevation model (DEM) which is registered with the collimated LEND epithermal map. From the LOLA transforms we impose a thermal functional decomposition and systematic statistical analysis of the LEND epithermal map. Our hypothesis testing suggests in most high latitude bands studied> +/- 45 deg: Epithermal rates in pole-facing slopes are significantly lower than epithermal rates in equivalent equator-facing slopes. As a control study, we find that there is no statistically significant difference between equivalent east and west facing slopes. This finding suggests topographic modulation of insolation is a factor influencing the lunar H budget. Importantly, this result is consistent with observations in terrestrial, Martian research.

McClanahan, T. P.↗

Tracking Radionuclide Fractionation in the First Atomic Explosion Using Stable Elements

Compositional analysis of postdetonation fallout is a tool for forensic identification of nuclear devices. However, the relationship between device composition and fallout composition is difficult to interpret because of the complex combination of physical mixing, nuclear reactions, and chemical fractionations that occur in the chaotic nuclear fireball. By using a combination of in situ microanalytical techniques (electron microprobe analysis and secondary ion mass spectrometry), we show that some heavy stable elements (Rb, Sr, Zr, Ba, Cs, Ba, La, Ce, Nd, Sm, Dy, Lu, U, Th) in glassy fallout from the first nuclear test, Trinity, are reliable chemical proxies for radionuclides generated during the explosion. Stable-element proxies show that radionuclides from the Trinity device were chemically, but not isotopically, fractionated by condensation. Moreover, stable-element proxies delineate chemical fractionation trends that can be used to connect present-day fallout composition to past fireball composition. Stable-element proxies therefore offer a novel approach for elucidating the phenomenology of the nuclear fireball as it relates to the formation of debris and the fixation of device materials within debris.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Effect of Kr-85 Decay to Rb-85 on Waste Forms - 17105

Krypton-85 (Kr-85) is a volatile radionuclide released during the reprocessing of used nuclear fuel (UNF). Prior to discharge of process off-gas streams to the environment, removal of Kr-85 is required to meet emission regulations. Once removed from the off-gas streams, Kr (containing stable Kr in addition to Kr-85) must be placed in storage until the Kr-85 has decayed to levels such that its potential release would meet regulatory guidelines. The current method of storage is high-pressure metal canisters. Historically, concerns have been expressed that the decay product of Kr-85, Rubidium-85 (Rb-85), could cause corrosion and weakening in the canisters that would ultimately lead to premature failure and release of Kr-85. Alternate methods and materials, such as matrix isolation in a vapor deposited metal and immobilization in zeolites, have been investigated as storage approaches for Kr. However, even these storage methods may become compromised due to the chemical effects of Rb-85 arising from the decay of Kr-85. A review was conducted of the available literature to examine topics relevant to the effects of Rb on the long-term storage of Kr-85, examine the source terms in the context of this concern, and suggest a path forward to resolve outstanding knowledge gaps. In the course of this analysis, several knowledge gaps were identified. Examples include: o The use of solid sorbents to potentially permit more Kr-85-bearing gas to be loaded into canisters, either at the pressures used in the current method or at significantly lower pressures. o A cost-to-benefit analysis is needed to ascertain the practicality of manufacturing waste forms for Kr-85 storage with solid sorbents. o The effects of radiation and chemical transmutation in solid sorbents or matrices for this application are virtually unknown. o Fundamental data are needed on corrosion rates and mechanisms as functions of Rb concentration, storage temperature, etc., for various storage approaches (e.g., as compressed gas or encapsulated in a getter material) and storage container materials. The present analysis focused on the available information regarding storage of Kr-85 in high-pressure containers. It was judged unlikely that such containers would be compromised by corrosion from the Rb decay product, especially if the Kr recovery operations result in a gas composition with very low oxygen content. However, this conclusion should be revisited based on preliminary data gathered from analysis of legacy Kr waste forms. These legacy waste forms are a result of experiments conducted at Idaho National Laboratory over 30 y ago and have been stored for more than three Kr-85 half-lives. Evaluation of these forms indicates significant corrosion, the cause of which has not been conclusively determined. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

EARLY SOLAR NEBULA CONDENSATES WITH CANONICAL, NOT SUPRACANONICAL, INITIAL {sup 26}Al/{sup 27}Al RATIOS

The short-lived radionuclide {sup 26}Al existed throughout the solar nebula 4.57 Ga ago, and the initial abundance ratio ({sup 26}Al/{sup 27}Al){sub 0}, as inferred from magnesium isotopic compositions of calcium-aluminum-rich inclusions (CAIs) in chondritic meteorites, has become a benchmark for understanding early solar system chronology. Internal mineral isochrons in most CAIs measured by secondary ion mass spectrometry (SIMS) give ({sup 26}Al/{sup 27}Al){sub 0} {approx} (4-5) x 10{sup -5}, called 'canonical'. Some recent high-precision analyses of (1) bulk CAIs measured by multicollector inductively coupled plasma mass spectrometry (MC-ICPMS), (2) individual CAI minerals and their mixtures measured by laser-ablation MC-ICPMS, and (3) internal isochrons measured by multicollector (MC)-SIMS indicated a somewhat higher 'supracanonical' ({sup 26}Al/{sup 27}Al){sub 0} ranging from (5.85 {+-} 0.05) x 10{sup -5} to >7 x 10{sup -5}. These measurements were done on coarse-grained Type B and Type A CAIs that probably formed by recrystallization and/or melting of fine-grained condensate precursors. Thus the supracanonical ratios might record an earlier event, the actual nebular condensation of the CAI precursors. We tested this idea by performing in situ high-precision magnesium isotope measurements of individual minerals in a fine-grained CAI whose structures and volatility-fractionated trace element abundances mark it as a primary solar nebula condensate. Such CAIs are ideal candidates for the fine-grained precursors to the coarse-grained CAIs, and thus should best preserve a supracanonical ratio. Yet, our measured internal isochron yields ({sup 26}Al/{sup 27}Al){sub 0} = (5.27 {+-} 0.17) x 10{sup -5}. Thus our data do not support the existence of supracanonical ({sup 26}Al/{sup 27}Al){sub 0} = (5.85-7) x 10{sup -5}. There may not have been a significant time interval between condensation of the CAI precursors and their subsequent melting into coarse-grained CAIs.

79 ASTRONOMY AND ASTROPHYSICS↗

Venus Flagship Mission Concept: A Decadal Survey Study

More than any other known planet, Venus is essential to our understanding of the evolution and habitability of Earth-size planets throughout the galaxy. We address two critical questions for planetary science: 1) How, if at all, did Venus evolve through a habitable phase? 2) What circumstances affect how volatiles shape habitable worlds? More than any other group, volatile elements have a strong influence on the evolutionary paths of rocky bodies and are critical to understanding solar system evolution. It is clear that Venus experienced a different volatile element history from the Earth and provides the only accessible example of one end-state of habitable Earth-size planets. Venus will allow us to identify the mechanisms that operate together to produce and maintain habitable worlds like our own.The (VFM) concept architecture relies on five collaborative platforms: an Orbiter, Lander, variable-altitude Aerobot and two Small Satellites (SmallSats) delivered via a single launch on a Falcon 9 heavy expendable. The platforms would use multiple instruments to measure the exosphere, atmosphere and surface at multiple scales with high precision and over time. VFM would provide the first measurements of mineralogy and geochemistry of tessera terrain to examine rocks considered to be among the most likely to have formed in a habitable climate regime. Landed, descent, aerial and orbital platforms would work synergistically to measure the chemical composition of the atmosphere including the Aerobot operating for 60 days in the Venus clouds. Loss mechanisms would be constrained by the SmallSats in two key orbits. The baseline payload for VFM includes instruments to make the first measurements of seismicity and remanent magnetism, the first long-lived (60 day) surface platform and the first life detection instrument at Venus to interrogate what could be an inhabited world.The VFM concept directly addresses each of the three Venus Exploration Analysis Group (VEXAG) goals as well as several of the strategic objectives of the 2020 NASA Science Plan, Planetary Science Division, Heliophysics and Astrophysics. The simultaneous, synergistic measurements of the solid body, surface, atmosphere and space environment provided by the VFM would allow us to target the most accessible Earth-size planet in our galaxy, and gain a profound new understanding of the evolution of our solar system and habitable worlds.

Segura, Marcia↗

Temperature Effects on Droplet Oscillation Decay with Application to Fuel Property Measurement

Observation of oscillation decay in droplets has been shown to be an effective approach in determining physical properties such as viscosity and surface tension for emerging biofuels using μl quantities. Herein this work extends the approach to higher temperatures relevant to fuel injection conditions for internal combustion engines. Experiments are conducted that use high-resolution strobed imaging of moving, heated, μm-sized, fuel droplets to capture shape oscillation decay through image processing and analysis. Two fuels are investigated, iso-butanol and a primary reference fuel (PRF 84), which is a mixture of iso-octane and n-heptane. A piezoelectric droplet generator is used to generate a continuous train of single droplets, which are given an initial perturbation and subsequently undergo damped oscillations, captured using strobed imaging. Surface tension and viscosity calculated at four different temperatures ranging from 30°C-55°C using the frequency and decay time associated with the fundamental mode are found to be within ~ 10% of reference values obtained from the literature. Complementary numerical simulations are performed that utilize a volume-of-fluid approach to track transient droplet oscillation phenomena along with heat and mass transfer in a 2D axisymmetric domain. Simulations, where droplet size and temperature can be independently varied, capture an expected decrease in oscillation frequency and increase in decay time, with increase in fuel temperature. The simulations are further used to study the relative contribution to deviations in surface tension and viscosity predictions due to heat and mass transfer from the droplet, as well as viscous effects violating the inviscid flow assumption in the droplet oscillation theory. Mass loss effects are found to be negligible. Temperature change due to heat transfer is found to have the next highest sensitivity, particularly for the more volatile PRF 84, which has a lower viscosity and associated Ohnesorge number. For isobutanol, which has a higher viscosity and Ohnesorge number, viscous effects contribute the most to deviation in fuel property predictions.

09 BIOMASS FUELS↗

Adsorption of Iodine and Tritium from UNF Reprocessing Off-Gas Streams

The need to control emissions of the gaseous radionuclides to the air during nuclear fuel recycling is widely recognized. Gaseous radionuclides can partition to off-gas streams emanating from the various individual processes used in the recycle plant, such as from the mechanical head end (shear), tritium pretreatment, fuel dissolver, vessel vents, cell ventilation, and conversion operations. In traditional recycle plants, the bulk of the four primary volatile fission products (i.e., {sup 3}H, {sup 14}C, {sup 85}Kr, and {sup 129}I) is released in the head-end processes, for example, the dissolution process. The usual off-gas treatment sequence of operations targets removal of tritium (as {sup 3}HHO), iodine, carbon (as {sup 14}CO{sub 2}), and the noble gases, in that order. Water and iodine are captured first because the other species are relatively unimpeded by the sorbents used for water and iodine, so they flow downstream to additional treatment processes. Water and iodine do react with one another, and many techniques used to collect one of these species also collect some fraction of the other. It is quite desirable to sequester the iodine and water separately because the tritiated water may be disposed of as a low level waste. If not cleanly separated, contamination of the low-level waste by iodine may elevate its classification to high-level waste and result in greater costs for disposal. The proposed sorption sequence was tested in the laboratory. Use of a second column of AgZ permits the detection of breakthrough from the primary AgZ column while protecting the downstream 3AMS column from collecting iodine. (This arrangement is equivalent to enabling intra-column sampling of the primary column.) Neutron activation analysis of the 3AMS revealed that iodine was below, or at, the level of detection. The results successfully demonstrated that iodine can be sequestered in the AgZ while the water is collected free of iodine in the 3AMS column. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Growth of strontium ruthenate films by hybrid molecular beam epitaxy

We report on the growth of epitaxial Sr 2 RuO 4 films using a hybrid molecular beam epitaxy approach in which a volatile precursor containing RuO 4 is used to supply ruthenium and oxygen. The use of the precursor overcomes a number of issues encountered in traditional molecular beam epitaxy that uses elemental metal sources. Phase-pure, epitaxial thin films of Sr 2 RuO 4 are obtained. At high substrate temperatures, growth proceeds in a layer-by-layer mode with intensity oscillations observed in reflection high-energy electron diffraction. Films are of high structural quality, as documented by x-ray diffraction, atomic force microscopy, and transmission electron microscopy. In conclusion, the method should be suitable for the growth of other complex oxides containing ruthenium, opening up opportunities to investigate thin films that host rich exotic ground states.

36 MATERIALS SCIENCE↗

Design of a Robust Memristive Spiking Neuromorphic System with Unsupervised Learning in Hardware

Spiking neural networks (SNN) offer a power efficient, biologically plausible learning paradigm by encoding information into spikes. The discovery of the memristor has accelerated the progress of spiking neuromorphic systems, as the intrinsic plasticity of the device makes it an ideal candidate to mimic a biological synapse. Despite providing a nanoscale form factor, non-volatility, and low-power operation, memristors suffer from device-level non-idealities, which impact system-level performance. To address these issues, this article presents a memristive crossbar-based neuromorphic system using unsupervised learning with twin-memristor synapses, fully digital pulse width modulated spike-timing-dependent plasticity, and homeostasis neurons. Additionally, the implemented single-layer SNN was applied to a pattern-recognition task of classifying handwritten-digits. The performance of the system was analyzed by varying design parameters such as number of training epochs, neurons, and capacitors. Furthermore, the impact of memristor device non-idealities, such as device-switching mismatch, aging, failure, and process variations, were investigated and the resilience of the proposed system was demonstrated.

97 MATHEMATICS AND COMPUTING↗

Economics of Hybrid-Energy Systems and the Impact on Advanced Reactor Design and Operation

The economics of electricity production in the U.S. is changing with the introduction of recent federal regulations limiting carbon dioxide emissions in the electric power industry. This has already resulted in the closing of coal plants, plants which in the past to a degree served to balance production with daily variation in load. The resulting loss of electricity production is being made up with wind and solar renewables and gas-fired units, and with an increasing need for energy storage. It would appear that with the loss of the baseload component of the coal plants, the duty-cycle of the gas-fired units may necessarily increase, encroaching on the traditional nuclear plant domain with its inexpensive fuel. Gas plants are costly to operate on a continuous basis with relatively volatile fuel prices. It appears then that nuclear plants that are capable of flexible operation have the potential on an economic basis to displace gas-fired power units. For flexible operation with renewables advanced reactors have advantages over the current generation of pressurized water reactors (PWR) and the new small modular reactors (SMR). For PWRs and SMRs, pellet-cladding mechanical interaction, xenon poisoning, and thermal stress concentrations in structures place limits on the all-important response time for operation with renewables. These phenomena are, however, not as limiting for the liquid-metal fast reactor (LMR). This may permit greater power ramp rates than in a light water reactor which bestows an economic advantage in energy systems with renewables. An economic model is developed for studying electric grid options including plant mix and market rules for the case of a high renewable fraction. It returns the minimum cost solution from among a mix of plant types including nuclear, gas, and storage (i.e. hybrid energy systems) for a given fraction of electricity production by renewables. This model can be used to assess the economic advantage of nuclear plants over gas plants and advanced reactors over light water reactors in an electric grid with a high fraction of renewables. The model has an explicit treatment of plant dynamic effects, an important feature for analysis of hybrid energy systems with a renewables production component that is unpredictable and uncontrollable.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Evaluation of the Interference of Tenax®TA Adsorbent With Dimethylformamide Dimethyl Acetal Reagent for Gas Chromatography-Dragonfly Mass Spectrometry and Future Gas Chromatography-Mass Spectrometry in Situ Analysis

Among future space missions, national aeronautics and space administration (NASA) selected two of them to analyze the diversity in organic content within Martian and Titan soil samples using a gas chromatograph – mass spectrometer (GC–MS) instrument. The Dragonfly space mission is planned to be launched in 2027 to Titan's surface and explore the Shangri-La surface region for years. One of the main goals of this mission is to understand the past and actual abundant prebiotic chemistry on Titan, which is not well characterized yet. The ExoMars space mission is planned to be launched in 2028 to Mars’ surface and explore the Oxia Planum and Mawrth Vallis region for years. The main objectives focus on the exploration of the subsurface soil samples, potentially richer in organics, that might be relevant for the search of past life traces on Mars where irradiation does not impact the matrices and organics. One recently used sample pre-treatment for gas chromatography – mass spectrometry analysis is planned on both space missions to detect refractory organic molecules of interest for astrobiology. This pre-treatment is called derivatization and uses a chemical reagent – called dimethylformamide dimethyl acetal (DMF-DMA) – to sublimate organic compounds keeping them safe from thermal degradation and conserving the chirality of the molecules extracted from Titan or Mars’ matrices. Indeed, the detection of building blocks of life or enantiomeric excess of some organics (e.g. amino acids) after DMF-DMA pre-treatment and GC–MS analyses would be both bioindicators. The main results highlighted by our work on DMF-DMA and Tenax®TA interaction and efficiency to detect organic compounds at ppb levels in a fast and single preparation are first that Tenax®TA did not show the onset of degradation until after 150 experiments – a 120 h at 300 °C experiment – which greatly exceeds the experimental lifetimes for the DraMS and GC-space in situ investigations. Tenax®TA polymer and DMF-DMA produce many by-products (about 70 and 46, respectively, depending on the activation temperature). Further, the interaction between the two leads to the production of 22 additional by-products from DMF-DMA degradation, but these listed by-products do not prevent the detection of trace-level organic molecules after their efficient derivatization and volatilization by DMF-DMA in the oven ahead the GC–MS trap and column.

DraMS-Dragonfly mission↗

DPC Cement Filler Development (Progress Report)

The fillers research and development (R&D) program, mostly experimental, is part of a broader R&D program that includes new process modeling and performance assessment of criticality effects and the overall importance of criticality to repository performance (consequence screening). A literature research and consultation effort with experts by Hardin and Brady (2018) identified several potentially effective and workable filler materials including cements (primarily phosphate based), moltenmetal alloys, and low-temperature glasses. Filler attributes were defined, and the preliminary lists were compared qualitatively. Further comparative analysis will be done (e.g., cost estimates) after experimental screening has narrowed the list of alternatives. The following cement filler compositions were selected for experimental development work and accelerated testing in FY20: Aluminum phosphate cements (APCs); more specifically aluminum oxide / aluminum phosphate (Al 2 O 3 / AlPO 4 ) cements in which Al 2 O 3 serves as the filler material bound by an AlPO 4 binder formed by the reaction of Al 2 O 3 with H 3 PO 4 ; Calcium phosphate cements (CPCs); more specifically composed of pure or nearly pure hydroxyapatite or HAP (Ca 5 (PO 4 ) 3 (OH)); Wollastonite phosphate cements (WPC), specifically wollastonite and aluminum or calcium aluminum phosphates in which CaSiO 3 serves as the filler material and the phosphate serves as the binder. The FY20 effort focused on the optimization of compositions and subsequent processing of these three materials to achieve dense and well-consolidated monolithic samples with 30 to 40% porosity and permeabilities of 1 millidarcy. At the close of this progress report the aluminum phosphate cements (APCs) and the wollastonite phosphate cements (WPCs) appear to show the most promise for continued development. Less progress has been made with the calcium phosphate cements (CPCs); their slurry viscosities are high (and difficult to measure) and they exhibit relatively short cure times of 2 to 3 hours with concomitant and excessive volatile (e.g. CO 2 ) generation.

36 MATERIALS SCIENCE↗

An Icy Kuiper Belt Around the Young Solar-type Star HD 181327

Context. HD 181327 is a young main sequence F5/F6 V star belonging to the Beta Pictoris moving group (age approx.. 12 Myr). It harbors an optically thin belt of circumstellar material at radius approx.. 90 AU, presumed to result from collisions in a population of unseen planetesimals. Aims. We aim to study the dust properties in the belt in details, and to constrain the gas-to-dust ratio. Methods. We obtained far-infrared photometric observations of HD 181327 with the PACS instrument onboard the Herschel Space Observatory, complemented by new 3.2 mm observations carried with the ATCA array. The geometry of the belt is constrained with newly reduced HST/NICMOS scattered light images that allow the degeneracy between the disk geometry and the dust properties to be broken. We then use the radiative transfer code GRaTeR to compute a large grid of models, and we identify the grain models that best reproduce the spectral energy distribution (SED) through a Bayesian analysis. We attempt to detect the oxygen and ionized carbon fine-structure lines with Herschel/PACS spectroscopy, providing observables to our photochemical code ProDiMo. Results. The HST observations confirm that the dust is confined in a narrow belt. The continuum is detected with Herschel/PACS completing nicely the SED in the far-infrared. The disk is marginally resolved with both PACS and ATCA. A medium integration of the gas spectral lines only provides upper limits on the [OI] and [CII] line fluxes.We show that the HD 181327 dust disk consists of micron-sized grains of porous amorphous silicates and carbonaceous material surrounded by an important layer of ice, for a total dust mass of approx.. 0.05 Solar Mass (in grains up to 1 mm). We discuss evidences that the grains consists of fluffy aggregates. The upper limits on the gas atomic lines do not provide unambiguous constraints: only if the PAH abundance is high, the gas mass must be lower than approx. 17 Solar Mass. Conclusions. Despite the weak constraints on the gas disk, the age of HD 181327 and the properties of the dust disk suggest that it has passed the stage of gaseous planets formation. The dust reveals a population of icy planetesimals, similar to the primitive Edgeworth-Kuiper belt, that may be a source for the future delivery of water and volatiles onto forming terrestrial planets.

HD 181327↗

On the origin & thermal stability of Arrokoth's and Pluto's ice

In this paper we discuss in a thermodynamic, geologically empirical way the long-term nature of the stable majority ices that could be present in Kuiper Belt object (KBO) 2014 MU69 (also called Arrokoth; hereafter “MU(69)”) after its 4.6 Gyr residence in the Edgeworth-Kuiper belt (EKB) as a cold classical object. We compare the upper bounds for the gas production rate (~10^(24) molecules/s) measured by the New Horizons (NH) spacecraft flyby on 01 Jan 2019 to estimates for the outgassing flux rates from a suite of common cometary and KBO ices at the average ~ 40 K sunlit surface temperature of MU69, but do not find the upper limit very constraining except for the most volatile of species (e.g. CO, N2, CH4). More constraining is the stability versus sublimation into vacuum requirement over Myr to Gyr, and from this we find only 3 common ices that are truly refractory: HCN, CH3OH, and H2O (in order of increasing stability), while NH3 and H2CO ices are marginally stable and may be removed by any positive temperature excursions in the EKB, as produced every 10^(8)–10^(9) years by nearby supernovae and passing O/B stars. To date the NH team has reported the presence of abundant CH3OH and H2O on MU69's surface (Stern et al., 2019; Grundy et al., 2020). NH3 has been searched for, but not found. We predict that future absorption feature detections, if any are ever derived from higher signal-to-noise ratio spectra, will be due to an HCN or poly-H2CO based species. Consideration of the conditions present in the EKB region during the formation era of MU69 lead us to state that it is highly likely that it “formed in the dark”, in an optically thick mid-plane, unable to see the nascent, variable, highly luminous Young Stellar Object (YSO)/TTauri Sun, and that KBOs contain HCN and CH3OH ice phases in addition to the H2O ice phases found in their short period (SP) comet descendants. Finally, when we apply our ice thermal stability analysis to bodies/populations related to MU69, we find that methanol ice is likely ubiquitous in the outer solar system; that if Pluto isn't a fully differentiated body, then it must have gained its hypervolatile ices from proto-planetary disk (PPD) sources in the first few Myr of the solar system's existence; and that hypervolatile rich, highly primordial comet C/2016 R2 was placed onto an Oort Cloud orbit on a similar few Myr timescale.

Pluto↗

Gamma emission tomography measurements of fuel assemblies at the Halden reactor

Gamma emission tomography measurements have been performed at the Halden Reactor Project using a dedicated instrument, which utilizes a high-resolution gamma-ray detector allowing for spectroscopic analysis of the measurement data. Measurements have been performed on two fuel assemblies consisting of 9 and 13 rods, respectively, in order to characterize the rod-wise radioactive source distribution (i.e. fission and activation products) within the fuel. The 9-rod fuel assembly consisted of five fuel rods at 50 MWd/kgUO{sub 2} and four fuel rods at 26 MWd/kgUO{sub 2}, where all rods had cooled for approximately 22 years at the time of measurement. The rods in the 13-rod assembly all had a burnup of ∼4.5 MWd/kgUO{sub 2}, and cooled for approximately 1.5 years at the time of measurement. In this paper, the tomographic data was reconstructed using the Filtered Backprojection technique, where no consideration to gamma-ray attenuation in the fuel was given. Due to the varying burnup and cooling times between the assemblies, the spectroscopic data also varied between the respective sets of measurements. The high-resolution detector used in the measurements allowed for tomographic reconstruction of many gamma-ray peaks corresponding to various fission products and activation products present in the fuel and structural materials. For instance the gamma tomography technique has shown rod-wise variation in the contents of fission products between the high-burnup and low-burnup rods. The rod-internal distribution of fission products was also observed where the volatile fission product {sup 137}Cs is observed to have migrated to the outer pellet surface in fuel rods in the 9-rod assembly, and where the gaseous fission product {sup 85}Kr is observed to have a uniform distribution in each fuel rod's gas plenum.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Analysis of Solar Cell Quality Using Voltage Metrics: Preprint

The highest efficiency solar cells provide both excellent voltage and current. Of these, the open-circuit voltage (Voc) is more frequently viewed as an indicator of the material quality. However, since the Voc also depends on the band gap of the material, the difference between the band gap and the Voc is a better metric for comparing material quality of unlike materials. To take this one stepfurther, since Voc also depends on the shape of the absorption edge, we propose to use the ultimate metric: the difference between the measured Voc and the Voc calculated from the external quantum efficiency using a detailed balance approach. This metric is less sensitive to changes in cell design and definition of band gap. The paper defines how to implement this metric and demonstrates how itcan be useful in tracking improvements in Voc, especially as Voc approaches its theoretical maximum.

14 SOLAR ENERGY↗

Well-to-wheels greenhouse gas and air pollutant emissions from battery electric vehicles in China

Electric vehicles (EVs) play a crucial role in addressing climate change and urban air quality concerns. China has emerged as the global largest EV market with 1.2 million EVs sold in 2018. This study established a novel life cycle energy use and emission inventory collecting up-to-date data including the electricity generation mix, emission controls in the power and industrial sectors, and the energy use in the fuel transport to estimate the well-to-wheels (WTW) greenhouse gas (GHG), and air pollutant emissions for battery electric vehicles (BEVs) and gasoline passenger vehicles in China. The results show that an average BEV has 35% lower WTW GHG emissions than an average gasoline car. BEVs reduce volatile organic compounds (VOCs) and nitrogen oxides (NOX) emissions by 98% and 34%, respectively, but have comparable or slightly higher primary fine particulate matter (PM2.5) and sulfur dioxide (SO2) emissions. Compact and small-size vehicles generally have lower GHG and air pollutant emissions than mid- and large-size vehicles. Class A vehicles contribute the most in the absolute amount of GHG and air pollutant emissions and therefore have the biggest potential for emission reduction. Our results suggest that global policymakers should continue to promote the transition to clean power sources, emission control, and fuel economy regulations, which are critical to enhancing emission mitigation benefits of BEVs. We also suggest EV development strategies should be formulated targeting vehicle class with the biggest emission mitigation potentials.

Air pollutant emissions↗