Search NASA⌕ Search

SEARCH · Search NASA

Results for “WIND MODELING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Wind-tunnel/flight correlation study of aerodynamic characteristics of a large flexible supersonic cruise airplane (XB-701) 2: Extrapolation of wind-tunnel data to full-scale conditions

The results of calculations necessary to extrapolate performance data on an XB-70-1 wind tunnel model to full scale at Mach numbers from 0.76 to 2.53 are presented. The extrapolation was part of a joint program to evaluate performance prediction techniques for large flexible supersonic airplanes similar to a supersonic transport. The extrapolation procedure included: interpolation of the wind tunnel data at the specific conditions of the flight test points; determination of the drag increments to be applied to the wind tunnel data, such as spillage drag, boundary layer trip drag, and skin friction increments; and estimates of the drag items not represented on the wind tunnel model, such as bypass doors, roughness, protuberances, and leakage drag. In addition, estimates of the effects of flexibility of the airplane were determined.

Peterson, J. B., Jr.↗

Contribution of the National Aeronautics and Space Administration Langley Research Center

As part of a special international effort, three nozzles were designed and tested on single nacelle models in wind tunnels of several nations belonging to the North Atlantic Treaty Organization. All three of these nozzles were investigated in the Langley 16-foot transonic wind tunnel at the National Aeronautics and Space Administration's Langley Research Center. Langley Research Center also contributed theoretical calculations of the jet plume boundary and afterbody pressures. The calculations were obtained using an iterative solution which combined the inviscid Douglas Neumann method for the external flow with the method of characteristics for the flow in the jet plume. For the investigation, the nozzles were mounted on a single nacelle model 15.24 centimeters in diameter and 162.56 centimeters long. Tests were made at free stream Mach number from 0.4 to 1.2, and at Reynolds numbers per meter from 7.38 million to 13.78 million depending on the Mach number. Four types of data were recorded: afterbody pressure data, afterbody force data, model boundary layer data, and tunnel wall pressure data. The ratio of jet total pressure to free stream static pressure ranged up to 8.5. A description of the wind tunnel, model, and test procedure is included.

Compton, W. B., III↗

A DFW microburst model based on DL-191 data

Analysis of the August 2, 1985 crash of an L-1011 jumbo jet (DL-191), on approach to the Dallas-Ft. Worth International Airport (DFW) in a thunderstorm indicates that the severe windshear microburst which caused the crash was composed not only of a strong downflow and outflow but also included several large-scale vortex rings entrained in the flowfield. A detailed two-dimensional model of the DFW microburst, based on data from DL-191, is presented. The model uses wind vector and flight path data reconstructed by NASA-Ames Research Center from the L-1011's digital flight data records and ground-based radar measurements. The model was developed using a combination of interactive graphics and a least-square-error best fit between the modeled and measured wind vectors along the DL-191 flight path. The model confirms a microburst structure based on a von Karman vortex street rather than on a Kelvin-Helmholtz instability and indicates that the L-1011 flew near or directly through several strong vortices. In addition, the results also confirm that the reconstructed wind vector data contain a time lag in the horizontal winds. For the DL-191 this lag is approximately three seconds.

Grantham, Walter J.↗

U.S. East Coast Lidar Measurements Show Offshore Wind Turbines Will Encounter Very Low Atmospheric Turbulence

The rapid growth of offshore wind energy requires accurate modeling of the wind resource, which can be depleted by wind farm wakes. Turbulence dissipation rate (ϵ) governs the accuracy of model predictions of hub-height wind speed and the development and erosion of wakes. Here we assess the variability of turbulence kinetic energy and ϵ using 13 months of observations from a profiling lidar deployed on a platform off the Massachusetts coast. Offshore, ϵ is 2 orders of magnitude smaller than onshore, with a subtle diurnal cycle. Wind direction influences the annual cycle of turbulence, with larger values in winter when the wind flows from the land, and smaller values in summer, when the wind flows from open ocean. Because of the weak turbulence, wind plant wakes will be stronger and persist farther downwind in summer.

17 WIND ENERGY↗

Effective thermal property improves phase change paint data

The phase-change coating technique presents itself as a valuable tool in determining the heat transfer rate over the surface of small complex wind tunnel models. A numerical technique is described which shows that an effective thermophysical property - the square root of the product of thermal conductivity, density, and specific heat - may significantly improve the accuracy of the phase-change coating technique with allowance for model inhomogeneity and temperature dependency in a transient environment. Results of the measured steady-state variation of the effective thermophysical property with temperature and the effect of surface heating rate on the effective thermophysical property are plotted for a representative homogeneous model material and for an extreme nonhomogeneous model material. The use of an effective thermophysical property to reduce phase-change paint data is recommended. The analysis also confirms that the apparatus described by Corwin and Kramer (1975) can be used to measure directly this effective thermophysical property for use in wind tunnel model heat-transfer measurements.

Drummond, J. P.↗

Assessment of Land Surface Model Performance in WRF for Simulating Wind at Heights Relevant to the Wind Energy Community

The Weather Research and Forecasting (WRF) model was used to investigate the impact of land surface model (LSM) physics on the simulated surface energy balance and the near surface wind profile, including heights reached by a modern wind turbine. Simulations were made for a domain centered over the Department of Energy (DOE) Southern Great Plains (SGP) Atmospheric Radiation Measurement Program (ARM) Central Facility in northern Oklahoma. High-resolution measurements of surface fluxes and profiles of wind speed, direction and turbulence were available for model validation. We tested 10 common LSM configurations in WRF including Noah, Noah-MP, SSiB, Pleim-Xiu, RUC, and others to evaluate (1) the accuracy of simulated surface energy fluxes, (2) the accuracy of forecasted rotor-disk height wind speeds, and (3) the sensitivity of rotor disk wind speed to the choice of LSM. WRF was run for four, two-week periods covering different canopy, surface meteorology and soil moisture conditions. LSM performances varied by simulation period and errors were greatest during periods with high soil moisture and live crop cover, indicating highest LSM sensitivity when PBL behavior is most coupled to land-atmosphere exchange. Higher wind speed errors also occurred at night during the spring, possibly from the difficulty with simulating nocturnal low-level jets. We found that choice of land surface model led to a ~10% improvement in simulating hub-height wind speed. Errors in wind shear were also sensitive to the choice of LSM. Overall the best performing models were Noah and Noah-MP. The variability of LSM performance across different soil moisture and vegetation canopy conditions suggests LSM representation of surface energy exchange processes in WRF remains a large source of model uncertainty. Furthermore, our results indicate the choice of LSM impacts simulated wind fields in WRF at heights relevant to the wind industry, at least for the Southern Great Plains region.

17 WIND ENERGY↗

Evaluation of different inertial control methods for variable-speed wind turbines simulated by fatigue, aerodynamic, structures and turbulence (FAST)

To mitigate the degraded power system inertia and undesirable primary frequency response caused by large-scale wind power integration, the frequency support capabilities of variable-speed wind turbines is studied in this work. This is made possible by controlled inertial response, which is demonstrated on a research turbine - controls advanced research turbine, 3-bladed (CART3). Two distinct inertial control (IC) methods are analysed in terms of their impacts on the grids and the response of the turbine itself. The released kinetic energy in the IC methods are determined by the frequency measurement or shaped active power reference in the turbine speed-power plane. The wind turbine model is based on the high-fidelity turbine simulator fatigue, aerodynamic, structures and turbulence, which constitutes the aggregated wind power plant model with the simplified power converter model. The IC methods are implemented over the baseline CART3 controller, evaluated in the modified 9-bus and 14-bus testing power grids considering different wind speeds and different wind power penetration levels. The simulation results provide various insights on designing such kinds of ICs. The authors calculate the short-term dynamic equivalent loads and give a discussion about the turbine structural loadings related to the inertial response.

17 WIND ENERGY↗

Evaluation of a Wind Farm Parametrization for Mesoscale Atmospheric Flow Models with Aircraft Measurements

Large offshore wind farms are usually clustered around transmission grids to minimize the expense of transmission, due to military zones, pipelines, and due to other uses such as nature preserves. However, this close proximity can undermine power production in downwind wind farms due to wakes from upwind wind farms. Therefore, the wind energy industry has great interest in determining the spatial dimensions of offshore wind farm wakes to assess the economical potential of planned wind farms. In this work we use wake measurements conducted by a research aircraft to evaluate the performance of a wind farm parameterization (WFP) in a mesoscale model during stably-stratified atmospheric conditions, in which the wake is expected to be the strongest. The observations were conducted on the 10 September 2016 within the project WIPAFF (Wind PArk Far Field) at the North Sea. The observations allow evaluation of both the horizontal and the vertical dimensions of the wake. The model simulates the length and most of the time the spatial dimensions of the wake. Further, we show that the largest potential for improving the performance of the WFP is rooted in an improvement of the background flow. This is due to the fact that the mesoscale model has problems representing the atmospheric boundary layer in the transition between land to open sea.

17 WIND ENERGY↗

Comet-solar wind interaction - Dynamical length scales and models

ICE magnetometer measurements at Comet Giacobini-Zinner and model simulations of comet-solar wind interactions are analyzed. The magnetometer data reveal the existence of intense hydromagnetic turbulence, a draping of the magnetic field lines to form a magnetotail, a weak shock, and a magnetic barrier region in the magnetosphere. The global models of the comet-solar wind interaction are described. The observed data and models are compared and good correlation is displayed.

Mendis, D. A.↗

Development of an Apparatus for Wind Tunnel Dynamic Experiments at High-alpha

A unique experimental apparatus that allows a wind tunnel model two degrees of freedom has been designed and built. The apparatus was developed to investigate the use of new methods to augment aircraft control in the high angle of attack regime. The model support system provides a platform in which the roll-yaw coupling at high angles of attack can be studied in a controlled environment. Active cancellation of external effects is used to provide a system in which the dynamics are dominated by the aerodynamic loads acting on the wind tunnel model.

Pedreiro, Nelson↗

Development of an Apparatus for Wind Tunnel Dynamic Experiments at High-alpha

A unique experimental apparatus that allows a wind tunnel model two degrees of freedom has been designed and built. The apparatus was developed to investigate the use of new methods to augment aircraft control in the high angle of attack regime. The model support system provides a platform in which the roll-yaw coupling at high angles of attack can be studied in a controlled environment. Active cancellation of external effects is used to provide a system in which the dynamics are dominated by the aerodynamic loads acting on the wind tunnel model.

Pedreiro, Nelson↗

Review of the dWind Model Conceptual Results

This presentation provides an overview of the dWind model, including its purpose, background, and current status. Baring-Gould presented this material as part of the September 2015 WINDExchange webinar.

17 WIND ENERGY↗

Evaluation of turbo-propulsion simulators as a testing technique for fighter aircraft

Ames Research Center has under way a program to develop the technology for using turbine-powered jet engine simulators as a test technique for simulating installed jet engine characteristics in small-scale wind-tunnel models of complete VSTOL fighter configurations. The program consists of three key elements: (1) static testing SN003 prototype turbine engine simulator (MAPS), (2) the development of the Propulsion Simulator Calibration Laboratory at Ames, and (3) the design, fabrication, and testing of a twin-engine 'closely coupled' V/STOL fighter wind-tunnel model. The model will use the Compact Multi-mission Propulsion Simulator (CMAPS) and will also be tested in flow-through and jet-effects modes to assess the effect of simultaneous inlet and nozzle flow simulation. This paper includes a description of the planned effort and anticipated future tasks.

Bailey, R. O.↗

SPIRALING OUT OF CONTROL: THREE-DIMENSIONAL HYDRODYNAMICAL MODELING OF THE COLLIDING WINDS IN {eta} CARINAE

Three-dimensional adaptive mesh refinement hydrodynamical simulations of the wind-wind collision between the enigmatic supermassive star {eta} Car and its mysterious companion star are presented which include radiative driving of the stellar winds, gravity, optically thin radiative cooling, and orbital motion. Simulations with static stars with a periastron passage separation reveal that the preshock companion star's wind speed is sufficiently reduced so that radiative cooling in the postshock gas becomes important, permitting the runaway growth of nonlinear thin-shell instabilities (NTSIs) which massively distort the wind-wind collision region (WCR). However, large-scale simulations, which include the orbital motion of the stars, show that orbital motion reduces the impact of radiative inhibition and thus increases the acquired preshock velocities. As such, the postshock gas temperature and cooling time see a commensurate increase, and sufficient gas pressure is preserved to stabilize the WCR against catastrophic instability growth. We then compute synthetic X-ray spectra and light curves and find that, compared to previous models, the X-ray spectra agree much better with XMM-Newton observations just prior to periastron. The narrow width of the 2009 X-ray minimum can also be reproduced. However, the models fail to reproduce the extended X-ray minimum from previous cycles. We conclude that the key to explaining the extended X-ray minimum is the rate of cooling of the companion star's postshock wind. If cooling is rapid then powerful NTSIs will heavily disrupt the WCR. Radiative inhibition of the companion star's preshock wind, albeit with a stronger radiation-wind coupling than explored in this work, could be an effective trigger.

79 ASTRONOMY AND ASTROPHYSICS↗

A study of aeroelastic stability for the model support system of the National Transonic Facility

Oscillations of wind-tunnel models have been observed during testing in the National Transonic Facility. These oscillations have been the subject of an extensive investigation. As a part of this effort, a study of the aeroelastic stability of the model support structure has been performed. This structure is mathematically modelled as a wing and conventional flutter analysis is performed. The math model implemented both experimentally and numerically obtained modal characteristics. A technique for illustrating the flutter boundary for wind tunnels is demonstrated. Results indicate that the classical flutter boundary is well above the operating envelope of the facility. However, the analysis indicates a damping-dependent instability is present which is inherent in the design. One possible modification in the design has been evaluated which eliminates the predicted instability.

Strganac, Thomas W.↗