Search NASA⌕ Search

SEARCH · Search NASA

Results for “Waste Processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Shear strength characteristics of mechanically biologically treated municipal solid waste (MBT-MSW) from Bangalore

Highlights: • Shear strength properties of mechanically biologically treated municipal solid waste. • Effect of unit weight and particle size on the shear strength of waste. • Effect of particle size on the strength properties. • Stiffness ratio and the strength ratio of MSW. - Abstract: Strength and stiffness properties of municipal solid waste (MSW) are important in landfill design. This paper presents the results of comprehensive testing of shear strength properties of mechanically biologically treated municipal solid waste (MBT-MSW) in laboratory. Changes in shear strength of MSW as a function of unit weight and particle size were investigated by performing laboratory studies on the MSW collected from Mavallipura landfill site in Bangalore. Direct shear tests, small scale and large scale consolidated undrained and drained triaxial tests were conducted on reconstituted compost reject MSW samples. The triaxial test results showed that the MSW samples exhibited a strain-hardening behaviour and the strength of MSW increased with increase in unit weight. Consolidated drained tests showed that the mobilized shear strength of the MSW increased by 40% for a unit weight increase from 7.3 kN/m{sup 3} to 10.3 kN/m{sup 3} at 20% strain levels. The mobilized cohesion and friction angle ranged from 5 to 9 kPa and 8° to 33° corresponding to a strain level of 20%. The consolidated undrained tests exhibited reduced friction angle values compared to the consolidated drained tests. The friction angle increased with increase in the unit weight from 8° to 55° in the consolidated undrained tests. Minor variations were found in the cohesion values. Relationships for strength and stiffness of MSW in terms of strength and stiffness ratios are developed and discussed. The stiffness ratio and the strength ratio of MSW were found to be 10 and 0.43.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Low temperature circulating fluidized bed gasification and co-gasification of municipal sewage sludge. Part 2: Evaluation of ash materials as phosphorus fertilizer

Highlights: • Thermal gasification and co-gasification of sewage sludge and wheat straw is tested. • Two low-temperature-circulating-fluidized-bed gasifiers (100 kW and 6 MW) are used. • Influence of fuel type on ash P fertilizer quality and heavy metal fate is assessed. • Incubation study and plant pot experiment applied to examine ash fertilizer effect. - Abstract: The study is part 2 of 2 in an investigation of gasification and co-gasification of municipal sewage sludge in low temperature gasifiers. In this work, solid residuals from thermal gasification and co-gasification of municipal sewage sludge were investigated for their potential use as fertilizer. Ashes from five different low temperature circulating fluidized bed (LT-CFB) gasification campaigns including two mono-sludge campaigns, two sludge/straw mixed fuels campaigns and a straw reference campaign were compared. Experiments were conducted on two different LT-CFBs with thermal capacities of 100 kW and 6 MW, respectively. The assessment included: (i) Elemental composition and recovery of key elements and heavy metals; (ii) content of total carbon (C) and total nitrogen (N); (iii) pH; (iv) water extractability of phosphorus after incubation in soil; and (v) plant phosphorus response measured in a pot experiment with the most promising ash material. Co-gasification of straw and sludge in LT-CFB gasifiers produced ashes with a high content of recalcitrant C, phosphorus (P) and potassium (K), a low content of heavy metals (especially cadmium) and an improved plant P availability compared to the mono-sludge ashes, thereby showing the best fertilizer qualities among all assessed materials. It was also found that bottom ashes from the char reactor contained even less heavy metals than cyclone ashes. It is concluded that LT-CFB gasification and co-gasification is a highly effective way to purify and sanitize sewage sludge for subsequent use in agricultural systems.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Using choice architecture to exploit a university Distinct Urban Mine

Highlights: • More than USD 11 million lie within this UK DUM for small household appliances. • Different collection systems should be established for working or broken appliances. • Consumer behaviour should inform choice architecture. •DUM evaluations should inform future collection system investments. - Abstract: There are widespread concerns regarding the potential future scarcity of ferrous and non-ferrous materials. However, there are already potentially rich reserves of secondary materials via high ownership of Electrical and Electronic Equipment (EEE) in economically-developed nations. Young people are particularly high consumers of EEE, thus university students and campuses may present an opportunity to harness this potential. University Distinct Urban Mines (DUM) may be used to exemplify how potential reserves of secondary metals may be exploited, and could contribute to the transition from a linear to a circular economy. This study aimed to evaluate small household appliances (SHA) DUM from a UK university, with the objectives to identify and quantify student households’ SHA ownership, WEEE recycling, stockpiling and discarding habits amongst student households, assess and evaluate the monetary potential of SHA DUM at UK level, and propose methods to exploit DUM for universities in the UK. To this purpose, a quantitative survey was undertaken to measure students’ ownership and discarding behaviour with respect to SHA. The amounts of ferrous and non-ferrous materials were then estimated and converted to monetary values from secondary materials market data to appraise the SHA DUM overall value. Thirty-five per cent of SHA are discarded in the general refuse. Broken personal care appliances (PCA) tend to be discarded due to hygiene and small size factors. When in working order, SHA tend to be equally reused, recycled or stockpiled. We conclude that a total of 189 tonnes of ferrous and non-ferrous materials were available via discarding or being stockpiled at the University of Southampton. Extrapolated to UK higher education level, discarded and stockpiled SHA represent a potential worth ∼USD 11 million. To initiate DUM exploitation within Higher Education campuses, we suggest improving users’ choice architecture by providing collection methods specific to broken SHA.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The new norms of food waste at the curb: Evidence-based policy tools to address benefits and barriers

Highlights: • Pairing social and technical innovations improves organic collection programs. • Supportive infrastructure significantly increases household food waste diversion. • Norm communication increases separation behavior and reduces dropout. •Model predicting-fit best behavior-change tools is partially supported. • Norms are most effective on population perceiving low benefits and barriers. - Abstract: Cities around the world are under increasing political pressure to develop organics collection programs (OCP) to curb the flow of food waste into landfills, reduce the associated greenhouse gases, and generate compost or biogas. While OCPs tend to focus on infrastructure, they often overlook the linchpin role that household behavior change plays in the success of OCPs. The current research used a longitudinal field experiment (n=370) to test both the effectiveness of a new curbside OCP and new social innovations intended to stimulate pro-environmental changes in household behavior. The findings suggest greater participation levels occur by implementing both new supportive infrastructure (i.e., curbside carts and collection services), and innovations that target the social aspects of waste (i.e., communicating social norms of separation). The data also provide an opportunity to test new model for predicting the most efficacious behavior-change interventions based on population profiles. The results provide some support for the model; reducing barriers (i.e., curbside carts and collection) tends to help all population profiles, but norm communication increases participation more for the hypothesized profile than for other sub-groups.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Characterization of brominated flame retardants from e-waste components in China

Highlights: • BFRs in housing plastics and PCBs from e-waste recycling enterprises in China were systematically examined. • Both PBDEs and TBBPA were detectable in most samples. • There is an apparent decreasing trend of BFRs from housing plastics and PCBs in China. • BFRs could be transferred into the recycled products those for other purpose use. - Abstract: Many studies show that high levels of many toxic metals and persistent and bio-accumulative chemicals have been found in electronic waste (e-waste) dismantling sites and their surrounding environmental media. Both flame-retardant plastic housing materials and printed circuit boards (PCBs) could be the major contributors. However, relatively little work has focused on the use or content of toxic substances and their changing in scrap housing materials and PCBs from home appliances. This study evaluated the existence of brominated flame retardants (BFRs, including polybrominated diphenyl ethers (PBDEs) and Tetrabromobisphenol-A (TBBPA)) in housing plastics and PCBs from home appliances collected from various e-waste recyclers in China. These were then analyzed for the potential migration of BFRs from the e-waste components into their recycled products. The results show that both PBDEs and TBBPA were found with high level in most of e-waste samples, indicating that the widespread use of BFRs in home appliances are entering into the end-of-life stage. For the plastics samples, CRT TVs and LCD monitors should be given priority for the control of BFRs. Regarding PBDEs, the dominant congeners of BDE-209 in the plastics samples contributed 90.72–93.54% to the total concentrations of PBDEs, yet there are large variations for PCBs samples: BDE-28, -47, -99, and -153 were also important congeners compositions, except for BDE-209. Compared with previous studies, the BFRs concentrations in current Chinese e-waste are trending to decline. This study also found that BFRs in housing plastics and PCBs will be transferred into the recycled products with other purpose use, and the new products could have highly enriched capacities for BFRs. The obtained results could be helpful to manage e-waste and their components properly in order to minimize associated environmental and health risks of BFRs, particularly for their further reuse.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

An optimization model for collection, haul, transfer, treatment and disposal of infectious medical waste: Application to a Greek region

Highlights: • We developed an optimization model to minimize cost of infectious waste management. •Two different software were used for model solution. • Model optimizes locations and capacities of treatment plants and transfer stations. • The higher percentage of total cost was due to construction of the treatment plant. • Sensitivity analysis with respect to fuel cost and waste production was conducted. - Abstract: The objective of this work was to develop an optimization model to minimize the cost of a collection, haul, transfer, treatment and disposal system for infectious medical waste (IMW). The model calculates the optimum locations of the treatment facilities and transfer stations, their design capacities (t/d), the number and capacities of all waste collection, transport and transfer vehicles and their optimum transport path and the minimum IMW management system cost. Waste production nodes (hospitals, healthcare centers, peripheral health offices, private clinics and physicians in private practice) and their IMW production rates were specified and used as model inputs. The candidate locations of the treatment facilities, transfer stations and sanitary landfills were designated, using a GIS-based methodology. Specifically, Mapinfo software with exclusion criteria for non-appropriate areas was used for siting candidate locations for the construction of the treatment plant and calculating the distance and travel time of all possible vehicle routes. The objective function was a non-linear equation, which minimized the total collection, transport, treatment and disposal cost. Total cost comprised capital and operation costs for: (1) treatment plant, (2) waste transfer stations, (3) waste transport and transfer vehicles and (4) waste collection bins and hospital boxes. Binary variables were used to decide whether a treatment plant and/or a transfer station should be constructed and whether a collection route between two or more nodes should be followed. Microsoft excel software was used as installation platform of the optimization model. For the execution of the optimization routine, two completely different software were used and the results were compared, thus, resulting in higher reliability and validity of the results. The first software was Evolver, which is based on the use of genetic algorithms. The second one was Crystal Ball, which is based on Monte Carlo simulation. The model was applied to the Region of East Macedonia – Thrace in Greece. The optimum solution resulted in one treatment plant located in the sanitary landfill area of Chrysoupolis, required no transfer stations and had a total management cost of 38,800 €/month or 809 €/t. If a treatment plant is sited in the most eastern part of the Region, i.e., the industrial area of Alexandroupolis, the optimum solution would result in a transfer station of 23 m{sup 3}, located near Kavala General Hospital, and a total cost of 39,800 €/month or 831 €/t. A sensitivity analysis was conducted and two alternative scenarios were optimized. In the first scenario, a 15% rise in fuel cost and in the second scenario a 25% rise in IMW production were considered. At the end, a cost calculation in €/t/km for every type of vehicle used for haul and transfer was conducted. Also, the cost of the whole system was itemized and calculated in €/t/km and €/t. The results showed that the higher percentage of the total cost was due to the construction of the treatment plant.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Combining anaerobic digestion and hydrothermal liquefaction in the conversion of dairy waste into energy: A techno economic model for New York state

There is increasing global interest and policies being enacted to lower greenhouse gas emissions, especially from the agricultural sector. In the U.S. for example, states with large dairy operations may combine proven manure valorization technologies, such as anaerobic digestion and hydrothermal liquefaction. Sustainable manure treatment would increase the recovery of energy and other useful co-products, namely biogas, biocrude oil and hydro-char as well as lower the environmental impacts. In this study, the economic feasibility of implementing a centralized bioenergy system in New York State was investigated. Here, the feasibility of this transformation depends on many factors, including capital costs, discount rates, and other financing arrangements, electricity selling prices, incentives and farm sizes and locations. For a large-scale implementation in New York State accounting for nearly 50% of the state’s dairy farms, our model of a distributed, hybrid anaerobic/hydrothermal system was shown to treat 590 million liters of wet manure per day, producing 607 million kWh of electricity, 162,000 L of biocrude oil and 117,000 kg of hydro-char per day. Electricity selling price is a critical factor. Increasing the electricity selling price from wholesale ($\$0.06$ /kWh) to retail ($\$0.18$ kWh) increased the net present value from $\$395$ million to $1.5 billion (considering a 40-year project lifetime).

42 ENGINEERING↗

Impact of Small-Alkane Solvents on Polyolefin Hydrogenolysis over a Ruthenium Catalyst

Selective catalytic hydrogenolysis of polyolefins is a promising route to convert plastic waste into valuable liquid products, such as lubricants, waxes, and surfactants. However, the high viscosity of polymer melts imposes mass transfer limitations on this reaction. Solvents can mitigate these challenges, but their effects on reaction kinetics and product selectivity remain underexplored. Here, we systematically explore the effects of small n-alkanes and cycloalkanes on the hydrogenolysis of polyethylene and polypropylene over a Ru/TiO 2 catalyst. Using kinetic measurements and isotopic labeling, we show that n-octane at high mass fractions alters the mechanism from direct hydrogenation to solvent-mediated hydrogen transfer, reducing the rate of C–C bond cleavage. Longer alkanes further inhibit reactivity due to stronger surface binding. 1,4-Dimethylcyclohexane suppresses methane formation, favoring heavier products, while decalin likely forms surface-bound aromatics that poison the catalyst. Overall, alkane solvents modulate product selectivity and reduce the yield of methane byproduct, allowing for ∼35–40% selectivity to valuable C 20 -C 30 alkane products. This work highlights the complex impact of polymer–alkane mixtures on hydrogenolysis kinetics relevant to the design of commercial-scale plastic waste valorization processes.

Catalysts↗

Enzymatic Nylon Deconstruction: Enzyme Discovery, Engineering, and Opportunities

Nylons are widely used synthetic polyamides valued for their strength, versatility, and durability across diverse applications. However, their petrochemical origin and energy-intensive production underscore the need for efficient, circular solutions. Conventional recycling methods remain limited by incomplete recovery, material degradation, and costly sorting requirements. Enzymatic depolymerization offers a selective, low-energy alternative capable of processing mixed waste streams under mild conditions. While significant progress has been achieved for polyesters, enzymatic degradation of polyamides is still at an early stage. The discovery of nylon hydrolases demonstrated the potential of biological systems to evolve catalysts for synthetic polyamides, yet reported depolymerization yields remain low. These limitations reflect both the structural complexity of nylons and the need for improved enzyme discovery and engineering. In conclusion, this review highlights recent advances, key challenges, and future directions for enzymatic nylon recycling, outlining its potential role enabling mixed polymer waste to be used as a green feedstock for remanufacturing.

Amides↗

A Machine Learning Model for Predicting Composition of Catalytic Coprocessing Products from Molecular Beam Mass Spectra

Demand for the development of an automated and integrated refining process for biofuels has increased in recent years due to the lack of generalized process inspection tools. In bio-oil upgrading processes, all process variables are maintained based on the offline specification of intermediates and products. A lack of real-time product specifications in batch-wise monitoring can cause process failure and wasted resources. Therefore, there is a need for a fast and accurate intermediates/product specification tool that can be used for real-time specification to reduce waste and mitigate the risk of process failure. Here, to address this gap, we developed a machine learning (ML) model for predicting speciated bio-oil composition, including paraffin, iso-paraffins, olefins, naphthene, and aromatics. The model is trained using the mass spectra from upgraded products collected in the vapor phase before condensation and predicts the composition of the condensed product. Training ML models using raw mass spectra is challenging due to numerous overlapped peaks originating from different parent compounds. With this in mind, we propose a protocol that (i) transforms raw mass spectra to chemistry-inspired predefined features and (ii) trains decision tree-based models using these features. Our results show that the random forest model was robust against overfitting and had the highest accuracy compared to other models. Moreover, a stochastic ablation method determined the eight most significant features while maximizing the accuracy. Our protocol facilitates real-time compositional analysis of upgraded bio-oils and thus real-time process monitoring. Additionally, this protocol enables the rational design of efficient catalysts and the determination of optimal process conditions.

09 BIOMASS FUELS↗

Chapter 14: Chemical Recycling of Commodity Plastics

Global plastic production is at an all-time high and shows little signs of slowing down. Less than 10% of all plastic produced is recycled, with approximately 90% entering landfills, incinerators, and oceans. This has led to a rapid accumulation of single-use plastic waste across the planet. Mechanical recycling has been executed at the industrial level to manage plastic waste for decades. However, mechanically recycled plastic products are significantly limited by contamination and low performance. Chemical recycling technologies offer another pathway for achieving plastic circularity. This chapter highlights the current state-of-the-art chemical recycling technologies for plastic decomposition into monomers, fuels, or other petrochemical feedstocks. A brief description of recyclability of plastics and the waste sorting process is provided followed by a high-level overview of chemical recycling technologies. Products, key barriers, and limitations are also discussed as well as a brief overview of techno-economics.

chemical recycling↗

Concentrations, profiles, and estimated human exposures for polychlorinated dibenzo-p-dioxins and dibenzofurans from electronic waste recycling facilities and a chemical industrial complex in Eastern China

Electronic shredder waste and dust from e-waste facilities, and leaves and surface soil collected in the vicinity of a large scale e-waste recycling facility in Taizhou, Eastern China, were analyzed for total dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) including 2,3,7,8-substituted congeners. We also determined PCDD/Fs in surface agricultural soils from several provinces in China for comparison with soils from e-waste facilities. Concentrations of total PCDD/Fs were high in all of the matrices analyzed and ranged from 30.9 to 11,400 pg/g for shredder waste, 3460 to 9820 pg/g dry weight for leaves, 2560 to 148,000 pg/g dry weight for workshop-floor dust, and 854 to 10200 pg/g dry weight for soils. We also analyzed surface soils from a chemical industrial complex (a coke-oven plant, a coal-fired power plant, and a chlor-alkali plant) in Shanghai. Concentrations of total PCDD/Fs in surface soil from the chemical industrial complex were lower than the concentrations found in soils from e-waste recycling plants, but higher than the concentrations found in agricultural soils. Agricultural soils from six cities in China contained low levels of total PCDD/Fs. Profiles of dioxin toxic equivalents (TEQs) of 2,3,7,8-PCDD/Fs in soils from e-waste facilities in Taizhou differed from the profiles found in agricultural soils. The estimated daily intakes of TEQs of PCDD/Fs via soil/dust ingestion and dermal exposure were 2 orders of magnitude higher in people at e-waste recycling facilities than in people at the chemical industrial site, implying greater health risk for humans from dioxin exposures at e-waste recycling facilities. The calculated TEQ exposures for e-waste workers from dust and soil ingestion alone were 2-3 orders of magnitude greater than the exposures from soils in reference locations. 37 refs., 1 fig., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Validation of Ultrafilter Performance Model Based on Systematic Simulant Evaluation

Because of limited availability of test data with actual Hanford tank waste samples, a method was developed to estimate expected filtration performance based on physical characterization data for the Hanford Tank Waste Treatment and Immobilization Plant. A test with simulated waste was analyzed to demonstrate that filtration of this class of waste is consistent with a concentration polarization model. Subsequently, filtration data from actual waste samples were analyzed to demonstrate that centrifuged solids concentrations provide a reasonable estimate of the limiting concentration for filtration.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Confinement of Iodine Molecules into Triple-Helical Chains within Robust Metal–Organic Frameworks

During nuclear waste disposal process, radioactive iodine as a fission product can be released. The widespread implementation of sustainable nuclear energy thus requires the development of efficient iodine stores that have simultaneously high capacity, stability and more importantly, storage density (and hence minimized system volume). Here, we report high I 2 adsorption in a series of robust porous metal–organic materials, MFM-300(M) (M = Al, Sc, Fe, In). MFM-300(Sc) exhibits fully reversible I 2 uptake of 1.54 g g –1 , and its structure remains completely unperturbed upon inclusion/removal of I 2 . Direct observation and quantification of the adsorption, binding domains and dynamics of guest I 2 molecules within these hosts have been achieved using XPS, TGA-MS, high resolution synchrotron X-ray diffraction, pair distribution function analysis, Raman, terahertz and neutron spectroscopy, coupled with density functional theory modeling. These complementary techniques reveal a comprehensive understanding of the host–I 2 and I 2 –I 2 binding interactions at a molecular level. The initial binding site of I 2 in MFM-300(Sc), I 2 I , is located near the bridging hydroxyl group of the [ScO 4 (OH) 2 ] moiety [I 2 I ···H–O = 2.263(9) Å] with an occupancy of 0.268. I 2 II is located interstitially between two phenyl rings of neighboring ligand molecules [I 2 II ···phenyl ring = 3.378(9) and 4.228(5) Å]. I 2 II is 4.565(2) Å from the hydroxyl group with an occupancy of 0.208. Significantly, at high I 2 loading an unprecedented self-aggregation of I 2 molecules into triple-helical chains within the confined nanovoids has been observed at crystallographic resolution, leading to a highly efficient packing of I 2 molecules with an exceptional I 2 storage density of 3.08 g cm –3 in MFM-300(Sc).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fuel cycles and envisioned roles of fast neutron reactors and hybrids

Future innovative nuclear fuel cycles will require insuring sustainability in terms of safe operation, optimal use of resources, radioactive waste minimization and reduced risk of proliferation. The present paper introduces some basic notions and fundamental fuel cycle strategies. The simulation approach needed to evaluate the impact of the different fuel cycle alternatives will also be shortly discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Neutronics for critical fission reactors and subcritical fission in hybrids

The requirements of future innovative nuclear fuel cycles will focus on safety, sustainability and radioactive waste minimization. Critical fast neutron reactors and sub-critical, external source driven systems (accelerator driven and fusion-fission hybrids) have a potential role to meet these requirements in view of their physics characteristics. This paper provides a short introduction to these features.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Italian hybrid and fission reactors scenario analysis

Italy is a country where a long tradition of studies both in the fission and fusion field is consolidated; nevertheless a strong public opinion concerned with the destination of the Spent Nuclear Fuel hinders the development of nuclear power. The possibility to a severe reduction of the NSF mass generated from a fleet of nuclear reactors employing an hypothetical fusionfission hybrid reactor has been investigated in the Italian framework. The possibility to produce nuclear fuel for the fission nuclear reactors with the hybrid reactor was analyzed too.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗