Search NASA⌕ Search

SEARCH · Search NASA

Results for “complex oxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Phase and photoelectrochemical behavior of solution-processed Fe{sub 2}O{sub 3} nanocrystals for oxidation of water under solar light

Monodispersed iron-oxide nanocrystals of controlled sizes (5-16 nm) were prepared by the thermal decomposition of iron-oleate complex to fabricate photoanode films for photoelectrochemical oxidation of water under simulated solar light. The smallest 5 nm particles were made mostly of {gamma}-Fe{sub 2}O{sub 3}, but other sizes showed mixed phases with Fe{sub 3}O{sub 4}, whose fraction increased with size. Size-dependent photoanodic currents were also observed, showing maximum photocurrent density for 12 nm particles. The high photocurrents were attributed to the lowered electron-hole recombination rates for the nanocrystals with the sizes comparable to the hole diffusion length.

36 MATERIALS SCIENCE↗

Comparison of selective oxidation in Ni-based alloys exposed to PWR primary water and Rhines Pack environments

A mechanistic understanding of corrosion and oxidation processes is crucial to ensure long-term resistance to stress corrosion cracking of Ni-based structural alloys in PWR primary and secondary systems. Aqueous corrosion of complex Ni-based alloys under PWR water conditions as well as gaseous oxidation of low-solute Ni binary alloys at high temperatures (>800 °C) have been studied extensively. However, a significant knowledge gap exists between response of Ni-based alloys in aqueous and gaseous environmental conditions. Selective oxidation at different temperatures was investigated in a series of gaseous Rhines Pack experiments for a high-purity Ni-5Cr binary alloy and a commercial Ni-18Cr-9Fe Alloy 600. Focused ion beam milling enabled the extraction of site-specific specimens containing high-energy grain boundaries. Analytical transmission electron microscopy was employed to analyze the microstructure and chemical composition of the resulting localized oxidation. The oxidation mechanism in the gaseous Rhines Pack atmosphere at 420 °C included the formation of a protective Cr-oxide cap above grain boundaries in all cases. At higher temperatures (600 and 800 °C), penetrative intergranular and transgranular internal oxidation was observed. Direct comparisons are made to corrosion response for these same materials in simulated PWR primary water at 320-360 °C. These results reveal a temperature dependence for gaseous oxidation and indicate mechanistic differences between aqueous and gaseous degradation in Ni-Cr alloys. These results imply that selective intergranular corrosion in PWR water is governed by processes beyond mere oxidation. Consideration of complex corrosion/dissolution processes at surfaces and in open cracks is essential for the better understanding of stress corrosion cracking mechanisms in PWR primary water.

Rhines Pack, Alloy 600, Ni-base alloys, Internal O↗

Synthesis, Characterization, and Oxidation Catalysis Studies of a Monofunctionalized Copper Pyridine-Aza Macrocycle

For this study, a copper-containing pyridine-aza macrocycle (PyMACs) with a propionic acid functionality was synthesized and characterized using X-ray crystallography and various spectroscopic techniques. The complex was then screened for peroxidase , olefin epoxidation, and phenol oxidation properties, using an ABTS assay, GC-MS, and UV-Vis spectrophotometry, respectively. The control copper (II) perchlorate salts were superior oxidation catalysts to the pentadentate carboxylic acid complex, CuLCOOH, and the unfunctionalized amine PyMAC, CuCRH. This might indicate that free copper ions facilitate the one-electron oxidations necessary for the reactions better than complexed copper. It also indicates that the copper PyMACs are far less effective than the analogous nickel and iron systems. We did, however, obtain valuable insights on the chemistry governing this family of PyMACs by probing the CuLCOOH’s solution and solid-phase protonation equilibria, which will be useful for isolating and studying the analogous iron complex, FeLCOOH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, Structure Elucidation, and Redox Properties of [superscript 99]Tc Complexes of Lacunary Wells-Dawson Polyoxometalates: Insights into Molecular [superscript 99]Tc-Metal Oxide Interactions

The isotope {sup 99}Tc ({beta}{sub max}, 293.7; half-life, 2.1 x 10{sup 5} years) is an abundant product of uranium-235 fission in nuclear reactors and is present throughout the radioactive waste stored in underground tanks at the Hanford and Savannah River sites. Understanding and controlling the extensive redox chemistry of {sup 99}Tc is important in identifying tunable strategies to separate {sup 99}Tc from spent fuel and from waste tanks and, once separated, to identify and develop an appropriately stable waste form for {sup 99}Tc. Polyoxometalates (POMs), nanometer-sized models for metal oxide solid-state materials, are used in this study to provide a molecular level understanding of the speciation and redox chemistry of incorporated {sup 99}Tc. In this study, {sup 99}Tc complexes of the ({alpha}{sub 2}-P{sub 2}W{sub 17}O{sub 61}){sup 10-} and ({alpha}{sub 1}-P{sub 2}W{sub 17}O{sub 61}){sup 10-} isomers were prepared. Ethylene glycol was used as a 'transfer ligand' to minimize the formation of TcO{sub 2} {center_dot} xH{sub 2}O. The solution structures, formulations, and purity of TcVO({alpha}{sub 1}/{alpha}{sub 2}-P{sub 2}W{sub 17}O{sub 61}){sup 7-} were determined by multinuclear NMR. X-ray absorption spectroscopy of the complexes is in agreement with the formulation and structures determined from {sup 31}P and {sup 183}W NMR. Preliminary electrochemistry results are consistent with the EXAFS results, showing a facile reduction of the TcVO({alpha}{sub 1}-P{sub 2}W{sub 17}O{sub 61}){sup 7-} species compared to the TcVO({alpha}{sub 2}-P{sub 2}W{sub 17}O{sub 61}){sup 7-} analog. The {alpha}{sub 1} defect is unique in that a basic oxygen atom is positioned toward the {alpha}{sub 1} site, and the Tc{sup V}O center appears to form a dative metal-metal bond with a framework W site. These attributes may lead to the assistance of protonation events that facilitate reduction. Electrochemistry comparison shows that the ReV analogs are about 200 mV more difficult to reduce in accordance with periodic trends.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Outer Coordination Sphere Proton Relay Base and Proximity Effects on Hydrogen Oxidation with Iron Electrocatalysts

The intra- and intermolecular deprotonation of [(CpC5F4N)Fe(PEtNR'PEt)H]+ (PEtNR'PEt = (Et2PCH2)2NR') complexes are rate-limiting processes in the electrocatalytic oxidation of hydrogen, and can be mediated by an amine base in the outer coordination sphere (OCS) by facilitating the matching of energy of deprotonation intermediates. A series of complexes with different N-substituents (R' = Me, Et, CH2OMe, CH2N(Ph)Me, and (CH2)nNMe2; n = 1–4) was examined computationally using density functional theory to determine the influence of the identity and proximity of the OCS base on the intramolecular deprotonation. Complexes with an OCS dimethylamino substituent were the most suitably energy matched. The number of carbon atoms between the secondary and OCS nitrogen atoms dictated the strength of the hydrogen bonding interaction and ring strain following deprotonation of the iron hydride. The previously reported [(CpC5F4N)Fe(PEtNR'PEt)H]+ (R' = (CH2)3NMe2) electrocatalyst was predicted to have the most favorable free energy (?G) and free energy of activation (?G‡). To verify the computational results, two of the iron precatalysts, (CpC5F4N)Fe(PEtN(CH2)nNMe2PEt)Cl (n = 2 and 4), were synthesized, and their electrocatalytic activity for the oxidation of hydrogen was determined under an atmosphere of H2 using DABCO as the exogenous base. Maximum turnover frequencies of 270 and 200 s-1 were measured when n = 2 and 4, respectively, validating the computational results.

Kumar, Neeraj↗

Formulation and method for preparing gels comprising hydrous cerium oxide

Formulations useful for preparing hydrous cerium oxide gels contain a metal salt including cerium, an organic base, and a complexing agent. Methods for preparing gels containing hydrous cerium oxide include heating a formulation to a temperature sufficient to induce gel formation, where the formulation contains a metal salt including cerium, an organic base, and a complexing agent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formulation and method for preparing gels comprising hydrous aluminum oxide

Formulations useful for preparing hydrous aluminum oxide gels contain a metal salt including aluminum, an organic base, and a complexing agent. Methods for preparing gels containing hydrous aluminum oxide include heating a formulation to a temperature sufficient to induce gel formation, where the formulation contains a metal salt including aluminum, an organic base, and a complexing agent.

36 MATERIALS SCIENCE↗

Deletion of nfnAB in Thermoanaerobacterium saccharolyticum and Its Effect on Metabolism

NfnAB catalyzes the reversible transfer of electrons from reduced ferredoxin and NADH to 2 NADP + . The NfnAB complex has been hypothesized to be the main enzyme for ferredoxin oxidization in strains of Thermoanaerobacterium saccharolyticum engineered for increased ethanol production. NfnAB complex activity was detectable in crude cell extracts of T. saccharolyticum. In this paper, activity was also detected using activity staining of native PAGE gels. The nfnAB gene was deleted in different strains of T. saccharolyticum to determine its effect on end product formation. In wild-type T. saccharolyticum, deletion of nfnAB resulted in a 46% increase in H 2 formation but otherwise little change in other fermentation products. In two engineered strains with 80% theoretical ethanol yield, loss of nfnAB caused two different responses: in one strain, ethanol yield decreased to about 30% of the theoretical value, while another strain had no change in ethanol yield. Biochemical analysis of cell extracts showed that the ΔnfnAB strain with decreased ethanol yield had NADPH-linked alcohol dehydrogenase (ADH) activity, while the ΔnfnAB strain with unchanged ethanol yield had NADH-linked ADH activity. Deletion of nfnAB caused loss of NADPH-linked ferredoxin oxidoreductase activity in all cell extracts. Significant NADH-linked ferredoxin oxidoreductase activity was seen in all cell extracts, including those that had lost nfnAB. This suggests that there is an unidentified NADH:ferredoxin oxidoreductase (distinct from nfnAB) playing a role in ethanol formation. The NfnAB complex plays a key role in generating NADPH in a strain that had become reliant on NADPH-ADH activity. Importance: Thermophilic anaerobes that can convert biomass-derived sugars into ethanol have been investigated as candidates for biofuel formation. Many anaerobes have been genetically engineered to increase biofuel formation; however, key aspects of metabolism remain unknown and poorly understood. One example is the mechanism for ferredoxin oxidation and transfer of electrons to NAD(P) + . The electron-bifurcating enzyme complex NfnAB is known to catalyze the reversible transfer of electrons from reduced ferredoxin and NADH to 2 NADP + and is thought to play key roles linking NAD(P)(H) metabolism with ferredoxin metabolism. Finally, we report the first deletion of nfnAB and demonstrate a role for NfnAB in metabolism and ethanol formation in Thermoanaerobacterium saccharolyticum and show that this may be an important feature among other thermophilic ethanologenic anaerobes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Plume dynamics and gas-phase molecular formation in transient laser-produced uranium plasmas

The dynamics of expansion, thermodynamics, and chemical reactions in laser-produced plasmas is of general interest for all laser ablation applications. This study investigates the complex morphology and behavior of reactive species in nanosecond laser-produced uranium plasmas. Comparing plasma morphology in various inert and reactive ambient gases provides information about the role of gas-phase chemistry in plume hydrodynamics. Background gases including nitrogen and argon foster collisional interactions leading to more significant plume confinement and the increase in persistence of uranium species. On the other hand, environments containing reactive gases such as oxygen promote chemical reactions between the plasma and ambient species. By comparing the expansion dynamics of uranium plumes in nitrogen, air, and argon, we discover that chemical reactions modify the hydrodynamics of the plume at later times of its evolution in the air background. Furthermore, we observe that varying the concentration of oxygen in the fill gas promotes different reaction pathways that lead to the formation of uranium oxides. The reaction pathways from atoms to diatomic to polyatomic molecules strongly vary with ambient oxygen concentration. Lower oxygen concentrations enhance the formation of uranium monoxide from atomic uranium, whereas higher oxygen concentrations tend to depopulate both atomic uranium and uranium monoxide concentrations through the formation of more complex uranium oxides.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling Oxidative Dehydrogenation of Propane with Supported Vanadia Catalysts Using Multireference Methods

The oxidative dehydrogenation of propane over supported vanadium oxide catalysts poses significant computational challenges due to complex electronic structure changes along the reaction coordinate, driven primarily by changes in the oxidation states of vanadium. To address these challenges, we systematically test quantum chemical methods, including multireference (MR) approaches, domain-based local pair natural orbital coupled cluster theory (DLPNO-CCSD(T)), and density functional theory (DFT). The initial C–H bond-breaking transition state requires MR treatment due to its multireference character, while subsequent steps permit efficient single-reference calculations. For the rate-limiting C–H activation step mediated by the vanadyl moiety, complete 1 active space second-order perturbation theory (CASPT2) yields an apparent activation barrier (E app 600K ) of 138 kJ/mol, consistent with experimental values (134 ± 4 kJ/mol; Gruene et al. Catal. Today 2010, 157, 137). In contrast, DLPNO-CCSD(T) overestimates this barrier (198 kJ/mol), whereas DFT predictions span 125–150 kJ/mol, depending on the functional. Our multireference investigation of this transition metal oxide-catalyzed process demonstrates that an active space that incorporates the C–H σ and V=O σ/π bonding orbitals, oxygen lone pairs, and their antibonding counterparts adequately captures electronic structure changes along the chemical transformation. Furthermore, these findings provide a general strategy for active space selection in transition metal oxide-catalyzed C/O–H bond activation reactions. The reference dataset from this work, which includes MR calculations with manually selected active spaces for all intermediates and transition states in the propane ODH reaction network, will serve as a benchmark for automating active space selection in similar systems.

Catalysts↗

Electrophilic Impact of High-Oxidation State Main-Group Metal and Ligands on Alkane C–H Activation and Functionalization Reactions

High-oxidation state main-group metal complexes are potential alternatives to transition metals for electrophilic alkane C–H functionalization reactions. Yet, there is little known about how selection of the p-block, main-group metal and ligand impact alkane C–H activation and functionalization thermodynamics and reactivity. This work reports density functional theory calculations used to determine qualitative and quantitative features of C–H activation and metal-methyl functionalization energy landscapes for reaction between high-oxidation state d 10 s 0 In III , Tl III , Sn IV , and Pb IV carboxylate complexes with methane. While the main-group metal influences the C–H activation barrier height in a periodic manner, the carboxylate ligand has a much larger quantitative impact on C–H activation with stabilized carboxylate anions inducing the lowest barriers. For metal-methyl reductive functionalization reactions, the main-group metal dramatically influences the barrier heights, which are correlated to reaction thermodynamics and bond heterolysis energies as a model for two-electron reduction energies. Generally, this work begins to outline which main-group metals and carboxylate ligands could be useful for alkane functionalization systems that utilize electrophilic C–H activation and metal-alkyl functionalization reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of Pd(0), PdS, and Pd-PdO core-shell nanoparticles by solventless thermolysis of a Pd-thiolate cluster

Colloids of palladium nanoparticles have been prepared by the solvated metal atom dispersion (SMAD) method. The as-prepared Pd colloid consists of particles with an average diameter of 2.8{+-}0.1 nm. Digestive ripening of the as-prepared Pd colloid, a process involving refluxing the as-prepared colloid at or near the boiling point of the solvent in the presence of a passivating agent, dodecanethiol resulted in a previously reported Pd-thiolate cluster, [Pd(SC{sub 12}H{sub 25}){sub 2}]{sub 6} but did not render the expected narrowing down of the particle size distribution. Solventless thermolysis of the Pd-thiolate complex resulted in various Pd systems such as Pd(0), PdS, and Pd-PdO core-shell nanoparticles thus demonstrating its versatility. These Pd nanostructures have been characterized using high-resolution electron microscopy and powder X-ray diffraction methods. - Graphical abstract: Solventless thermolysis of a single palladium-thiolate cluster affords various Pd systems such as Pd(0), Pd-PdO core-shell, and PdS nanoparticles demonstrating the versatility of the precursor and the methodology.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Controlling the Reduction of Chelated Uranyl to Stable Tetravalent Uranium Coordination Complexes in Aqueous Solution

The solution-state interactions between octadentate hydroxypyridinone (HOPO) and catecholamide (CAM) chelating ligands and uranium were investigated and characterized by UV-visible spectrophotometry and X-ray absorption spectroscopy (XAS), as well as electrochemically via spectroelectrochemistry (SEC) and cyclic voltammetry (CV) measurements. Depending on the selected chelator, we demonstrate the controlled ability to bind and stabilize U IV , generating with 3,4,3-LI(1,2-HOPO), a tetravalent uranium complex that is practically inert toward oxidation or hydrolysis in acidic, aqueous solution. At physiological pH values, we are also able to bind and stabilize U IV to a lesser extent, as evidenced by the mix of U IV and U VI complexes observed via XAS. Finally, CV and SEC measurements confirmed that the U IV complex formed with 3,4,3-LI(1,2-HOPO) is redox inert in acidic media, and U VI ions can be reduced, likely proceeding via a two-electron reduction process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A comprehensive approach for elucidating the interplay between 4f n +1 and 4f n 5d 1 configurations in Ln 2+ complexes

Lanthanides (Ln) are typically found in the +3 oxidation state. However, in recent decades, their chemistry has been expanded to include the less stable +2 oxidation state across the entire series except promethium (Pm), facilitated by the coordination of ligands such as trimethylsilylcyclopentadienyl, C 5 H 4 SiMe 3 (Cp'). The [LnCp' 3 ] complexes have been the workhorse for the synthesis and theoretical study of the fundamental aspects of divalent lanthanide chemistry, where experimental and computational evidence have suggested the existence of different ground state (GS) configurations, 4f n+1 or 4f n 5d 1 , depending on the specific metal. Standard reduction potentials and 4f n+1 to 4f n 5d 1 promotion energies have been two factors usually considered to rationalize the occurrence of these variable GS configurations, however the driving force behind this phenomenon is still not clear. In this work we present a comprehensive theoretical approach to shed light on this matter using the [LnCp 3 ] - model systems. We begin by calculating 4f n+1 to 4f n 5d 1 promotion energies and successfully correlate them with existing experimental data. Furthermore, we analyze how changes in the GS charge distribution between the Ln ions, LnCp 3 and the reduced [LnCp 3 ] - complexes (Ln = La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu) correlate with experimental trends in redox potentials and the calculated promotion energies. For this purpose, a comprehensive theoretical work that includes relativistic ligand field density functional theory (LFDFT) and relativistic ab initio wavefunction methods was performed. This study will help the rational design of suitable environments to tune the different GS configurations as well as modulating the spectroscopic properties of new Ln 2+ complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electron localization in a mixed-valence diniobium benzene complex

Reaction of the neutral diniobium benzene complex {[Nb(BDI)N t Bu] 2 (μ-C 6 H 6 )} (BDI = N,N'-diisopropylbenzene-β-diketiminate) with Ag[B(C 6 F 5 ) 4 ] results in a single electron oxidation to produce a cationic diniobium arene complex, {[Nb(BDI)N t Bu] 2 (μ-C 6 H 6 )}{B(C 6 F 5 ) 4 }. Investigation of the solid state and solution phase structure using single-crystal X-ray diffraction, cyclic voltammetry, magnetic susceptibility, and multinuclear NMR spectroscopy indicates that the oxidation results in an asymmetric molecule with two chemically inequivalent Nb atoms. Further characterization using density functional theory (DFT) calculations, UV-visible, Nb L 3,2 -edge X-ray absorption near-edge structure (XANES), and EPR spectroscopies supports assignment of a diniobium complex, in which one Nb atom carries a single unpaired electron that is not largely delocalized on the second Nb atom. During the oxidative transformation, one electron is removed from the δ-bonding HOMO, which causes a destabilization of the molecule and formation of an asymmetric product. Subsequent reactivity studies indicate that the oxidized product allows access to metal-based chemistry with substrates that did not exhibit reactivity with the starting neutral complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dioxygen Activation Kinetics over Distinct Cu Site Types in Cu-Chabazite Zeolites

Cu-exchanged zeolites activate dioxygen to form active sites for partial methane oxidation (PMO), nitrogen oxide decomposition, and carbon monoxide oxidation. Apparent rates of O 2 activation depend both on the intrinsic kinetics of distinct Cu site types and the distributions of such sites within a given zeolite, which depend on the density and arrangement of the framework Al atoms. In this work, we use hydrothermal synthesis methods to control the arrangement of framework Al sites in chabazite (CHA) zeolites and, in turn, the distinct Cu site types formed. Time-resolved in situ Raman spectroscopy reveals the kinetics of O 2 adsorption and activation within these well-defined Cu-CHA materials and the concomitant structural evolution of copper–oxygen (Cu x O y ) complexes, which are interpreted alongside Cu(I) oxidation kinetics extracted from in situ X-ray absorption spectroscopy (XAS). Raman spectra of several plausible Cu x O y species simulated using density functional theory suggest that experimental spectra (λ ex = 532 nm) capture the formation of mono(μ-oxo)dicopper species (ZCuOCuZ). Transient experiments show that the timescales required to form Cu x O y structures that no longer change in Raman spectra correspond to the durations of oxidative treatments that maximize CH 3 OH yields in stoichiometric PMO cycles (approximately 2 h). Yet, these periods extend well beyond the timescales for the complete conversion of the initial Cu(I) intermediates to their Cu(II) states (<0.3 h, reflected in X-ray absorption near edge spectroscopy spectra), which demonstrates that Cu x O y complexes continue to evolve structurally following rapid Cu(I) oxidation. The dependence of ZCuOCuZ formation rates on O 2 pressure, H 2 O pressure, and temperature is consistent with a mechanism in which ZCuOH reduces to form ZCu + sites that bind molecular oxygen and form ZCu-O 2 intermediates. Subsequent reaction with proximate ZCu + forms bridging peroxo dicopper complexes that cleave O–O bonds to form ZCuOCuZ in steps facilitated by water. These data and interpretations provide evidence for the chemical processes that link rapid and kinetically irrelevant Cu oxidation steps (frequently probed by XAS and UV–vis spectroscopy) to the relatively slow genesis of reactive Cu complexes that form CH 3 OH during PMO. In doing so, we reveal previously unrecognized complexities in the processes by which Cu ions in zeolites activate O 2 to form active Cu x O y complexes, which underscore the insight afforded by judicious combinations of experimental and theoretical techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling Cu{sup 2+}-Aβ complexes from computational approaches

Amyloid plaques formation and oxidative stress are two key events in the pathology of the Alzheimer disease (AD), in which metal cations have been shown to play an important role. In particular, the interaction of the redox active Cu{sup 2+} metal cation with Aβ has been found to interfere in amyloid aggregation and to lead to reactive oxygen species (ROS). A detailed knowledge of the electronic and molecular structure of Cu{sup 2+}-Aβ complexes is thus important to get a better understanding of the role of these complexes in the development and progression of the AD disease. The computational treatment of these systems requires a combination of several available computational methodologies, because two fundamental aspects have to be addressed: the metal coordination sphere and the conformation adopted by the peptide upon copper binding. In this paper we review the main computational strategies used to deal with the Cu{sup 2+}-Aβ coordination and build plausible Cu{sup 2+}-Aβ models that will afterwards allow determining physicochemical properties of interest, such as their redox potential.

36 MATERIALS SCIENCE↗