Search NASA⌕ Search

SEARCH · Search NASA

Results for “dislocation density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Chemical Distribution and Bonding of Lithium in Intercalated Graphite: Identification with Optimized Electron Energy Loss Spectroscopy

Direct mapping of the lithium spatial distribution and the chemical state provides critical information on structure-correlated lithium transport in electrode materials for lithium batteries. Nevertheless, probing lithium, the lightest solid element in the periodic table, poses an extreme challenge with traditional X-ray or electron scattering techniques due to its weak scattering power and vulnerability to radiation damage. Here, we report nanoscale maps of the lithium spatial distribution in electrochemically lithiated graphite using electron energy loss spectroscopy in the transmission electron microscope under optimized experimental conditions. The electronic structure of the discharged graphite was obtained from the near-edge fine structure of the Li and C K-edges and ab initio calculations. A 2.7 eV chemical shift of the Li K-edge, along with changes in the density of states, reveals the ionic nature of the intercalated lithium with significant charge transfer to the graphene sheets. Direct mapping of lithium in graphite revealed nanoscale inhomogeneities (nonstoichiometric regions), which are correlated with local phase separation and structural disorder (i.e., lattice distortion and dislocations) as observed by high-resolution transmission electron microscopy. The surface solid-electrolyte interphase (SEI) layer was also imaged and determined to have a thickness of 10-50 nm, covering both edge and basal planes with LiF as its primary inorganic component. The Li K-edge spectroscopy and mapping, combined with electron microscopy-based structural analysis provide a comprehensive view of the structure-correlated lithium intercalation in graphite and of the formation of the SEI layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Numerical Investigation of the Pinning Phenomenon in Quasi-Periodic Frenkel Kontrova Model Under an External Force

We perform a numerical study on Frenkel–Kontrova (FK) models in quasi-periodic media subject to a constant external force. The quasi-periodic FK models appear in several physical problems such as deposition, spin waves in 1-D, planar dislocations in 3-D either in a quasi-crystal or on a cleaved surface with irrational slopes of a periodic crystal. The phenomenon that we study is pinning. When there is no force, the very homogeneous equilibria are abundant, but when there is a constant force, the uniformly distributed equilibrium states just slide away and the physically relevant equilibria are configurations with frequencies (inverse of densities in some interpretation) that are resonant with the frequencies of the medium. We use a dynamical interpretation of the equilibrium equation and perform a systematic Monte-Carlo exploration of the equilibria. We study the geometry and quantitative properties of the equilibria after the application of a constant external force. This leads to several quantitative regularities on the abundance and geometric properties of the pinned states in the models we consider. This complements recent qualitative studies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Crystal structure, energetics, and phase stability of strengthening precipitates in Mg alloys: A first-principles study

Magnesium alloys have attracted increasing interest due to their potential use as light-weight structural materials but their application is limited by their low strength compared to conventional alloys. Age hardening is commonly employed to form strengthening precipitates in such alloys, which impedes the motion of dislocations, and leads to improved strength. However, the exact composition, crystal structure, and energetics of many of these strengthening precipitates are either unknown or not clearly resolved, making the precise engineering and design of such alloys difficult. Toward this end, we use first-principles density functional theory calculations to elucidate the crystal structures and energetics of a very large set of precipitates in magnesium alloys. For cases where the precipitate crystal structure is not known, we comprehensively search over decorations of many prototype structures, including hcp superstructures, and in addition, perform global structural optimization using the Minima Hopping Method to predict suitable crystal structures. For all the strengthening precipitates, we calculate the formation energies, construct the respective zero temperature convex hulls, and analyze their stabilities. Here, we show that the bulk formation energies per solute atom (essentially, the solute chemical potentials) decrease along the observed sequences of precipitation, validating our calculations in Mg-{Nd, Gd, Y, Y-Nd, Nd-Zn, Gd-Zn, Y-Zn, Al, Zn, Sn, Al-Ca, Ca-Zn} alloy systems. In addition, we construct a monolayer model for the Guinier-Preston zones (GP zones) observed in the Mg-Nd-Zn system during early stages of age hardening, and thereby explain the formation of the γ" (Mg 5 (Nd,Zn)) phase from the GP zones, as observed in experiments.

36 MATERIALS SCIENCE↗

Development of an interatomic potential for the W–Ta system

A physics-inspired, data-driven interatomic potential framework for multi-element system is presented. This potential is based on the generalization of the embedded atom method potential and systematically incorporates two-, three- and many-body effects. Different atomic environments are described by atom-centered Gaussian basis sets which provides sufficient flexibility to capture diverse atomic environments and allows for easy optimization of the free parameters. An interatomic potential model for the tungsten–tantalum (W–Ta) system is developed using this framework by training on data from ab initio density functional theory (DFT) calculations. The potential is thoroughly tested at various compositions by comparing bulk and defect properties from experimental and DFT data. It is shown that the potential predicts the elastic constants, defect properties, such as vacancy and interstitial formation energies, core structures of dislocations, and melting points for both pure and tantalum and tungsten with an accuracy comparable to other single element machine learning based potentials. In conclusion, the potential model is used to investigate the formation energies of ordered alloys and vacancy formation energies for chemically random W–Ta alloys.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strain-induced partially flat band, helical snake states and interface superconductivity in topological crystalline insulators

Topological crystalline insulators in IV–VI compounds host novel topological surface states consisting of multi-valley massless Dirac fermions at low energy. Here we show that strain generically acts as an effective gauge field on these Dirac fermions and creates pseudo-Landau orbitals without breaking time-reversal symmetry. We predict the realization of this phenomenon in IV–VI semiconductor heterostructures, due to a naturally occurring misfit dislocation array at the interface that produces a periodically varying strain field. Remarkably, the zero-energy Landau orbitals form a flat band in the vicinity of the Dirac point, and coexist with a network of snake states at higher energy. We propose that the high density of states of this flat band gives rise to interface superconductivity observed in IV–VI semiconductor multilayers at unusually high temperatures, with non-Bardeen–Cooper–Schrieffer behaviour. Here, our work demonstrates a new route to altering macroscopic electronic properties to achieve a partially flat band, and provides a starting point for realizing novel correlated states of matter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Suppressed Superconductivity on the Surface of Superconducting RF Quality Niobium for Particle Accelerating Cavities

Significant performance degradation of superconducting RF (radio frequency) niobium cavities in high RF field is strongly associated with the breakdown of superconductivity on localized multi-scale surface defects lying within the 40 nm penetration depth. These defects may be on the nanometer scale, like grain boundaries and dislocations or even at the much larger scale of surface roughness and welding pits. By combining multiple superconducting characterization techniques including magneto-optical (MO) imaging and direct transport measurement with non-contact characterization of the surface topology using scanning confocal microscopy, we were able to show clear evidence of suppression of surface superconductivity at chemically treated RF-quality niobium. We found that pinning of vortices along GBs is weaker than pinning of vortices in the grains, which may indicate suppressed superfluid density on GBs. We also directly measured the local magnetic characteristics of BCP-treated Nb sample surface using a micro-Hall sensor in order to further understanding of the effect of surface topological features on the breakdown of superconducting state in RF mode.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparative electron spin resonance study of epi-Lu{sub 2}O{sub 3}/(111)Si and a-Lu{sub 2}O{sub 3}/(100)Si interfaces: Misfit point defects

An electron spin resonance study has been carried out on heteroepitaxial Si/insulator structures obtained through growth of epi-Lu{sub 2}O{sub 3} films on (111)Si ({approx}4.5% mismatch) by molecular-beam epitaxy, with special attention to the inherent quality as well as the thermal stability of interfaces, monitored through occurring paramagnetic point defects. This indicates the presence, in the as-grown state, of P{sub b} defects ({approx}5x10{sup 11} cm{sup -2}) with the unpaired sp{sup 3} Si dangling bond along the [111] interface normal, the archetypical defect (trap) of the standard thermal (111)Si/SiO{sub 2} interface, directly revealing, and identified as the result of, imperfect epitaxy. The occurrence of P{sub b} defects, a major system of electrically detrimental interface traps, is ascribed to lattice mismatch with related introduction of misfit dislocations. This interface nature appears to persist for annealing in vacuum up to a temperature T{sub an{approx}}420 deg. C. Yet, in the range T{sub an{approx}}420-550 deg. C, the interface starts to ''degrade'' to standard Si/SiO{sub 2} properties, as indicated by the gradually increasing P{sub b} density and attendant appearance of the EX center, an SiO{sub 2}-associated defect. At T{sub an{approx}}700 deg. C, [P{sub b}] has increased to about 1.3 times the value for standard thermal (111)Si/SiO{sub 2}, to remain constant up to T{sub an{approx}}1000 deg. C, indicative of an unaltered interface structure. Annealing at T{sub an}>1000 deg. C results in disintegration altogether of the Si/SiO{sub 2}-type interface. Passivation anneal in H{sub 2} (405 deg. C) alarmingly fails to deactivate the P{sub b} system to the device grade (sub) 10{sup 10} cm{sup -2} eV{sup -1} level, which would disfavor c-Lu{sub 2}O{sub 3} as a suitable future high-{kappa} replacement for the a-SiO{sub 2} gate dielectric. Comparison of the thermal stability of the c-Lu{sub 2}O{sub 3}/(111)Si interface with that of molecular-beam deposited amorphous-Lu{sub 2}O{sub 3}/(100)Si shows the former to be superior, yet unlikely to meet technological thermal budget requirements. No Lu{sub 2}O{sub 3}-specific point defects could be observed.

36 MATERIALS SCIENCE↗

Development of high-efficiency solar cells on silicon web

Achievement of higher efficiency cells by directing efforts toward identifying carrier loss mechanisms; design of cell structures; and development of processing techniques are described. Use of techniques such as deep-level transient spectroscopy (DLTS), laser-beam-induced current (LBIC), and transmission electron microscopy (TEM) indicated that dislocations in web material rather than twin planes were primarily responsible for limiting diffusion lengths in the web. Lifetimes and cell efficiencies can be improved from 19 to 120 microns, and 8 to 10.3% (no AR), respectively, by implanting hydrogen at 1500 eV and a beam current density of 2.0 mA/sq cm. Some of the processing improvements included use of a double-layer AR coating (ZnS and MgF2) and an addition of an aluminum back surface reflectors. Cells of more than 16% efficiency were achieved.

Meier, D. L.↗

Precise Synthesis of 4.75 V-Tolerant LiCoO 2 with Homogeneous Delithiation and Reduced Internal Strain

The rapid advancements in 3C electronic devices necessitate an increase in the charge cutoff voltage of LiCoO 2 to unlock a higher energy density that surpasses the currently available levels. However, the structural devastation and electrochemical decay of LiCoO 2 are significantly exacerbated, particularly at ≥4.5 V, due to the stress concentration caused by more severe lattice expansion and shrinkage, coupled with heterogeneous Li + intercalation/deintercalation reactions. Herein, employing the molten-salt synthesis technique, we propose a universal morphology-shaping strategy to attain bulk reaction homogeneity and reduce internal strains, even at extremely high charge voltages. The newly designed flattened polygon prismlike LiCoO 2 (P-LCO) particle, featuring a regular symmetrical arrangement along the c-axis, demonstrates a more homogeneous Li + extraction/insertion reaction, which results in a restrained transformation to detrimental O1 phase and reduced variation in lattice volume throughout the (de)lithiation processes. This benefits the mitigation of the local stress accumulation misfit dislocations and particle cracking, ultimately maintaining the mechanical stability of the cathode. Consequently, P-LCO is capable of breaking the voltage ceiling and exhibits exceptional long-term cycling capability at an ultrahigh voltage of 4.75 V. In conclusion, this work offers a brand-new perspective for the rational design of cathode morphology to address capacity deterioration caused by inhomogeneous delithiation and internal strain, thus inspiring the development of high-energy-density cathodes with improved durability.

36 MATERIALS SCIENCE↗

In situ X-ray diffraction measurement of shock-wave-driven twinning and lattice dynamics

We report that pressure-driven shock waves in solid materials can cause extreme damage and deformation. Understanding this deformation and the associated defects that are created in the material is crucial in the study of a wide range of phenomena, including planetary formation and asteroid impact sites, the formation of interstellar dust clouds, ballistic penetrators, spacecraft shielding and ductility in high-performance ceramics. At the lattice level, the basic mechanisms of plastic deformation are twinning (whereby crystallites with a mirror-image lattice form) and slip (whereby lattice dislocations are generated and move), but determining which of these mechanisms is active during deformation is challenging. Experiments that characterized lattice defects have typically examined the microstructure of samples after deformation, and so are complicated by post-shock annealing and reverberations. In addition, measurements have been limited to relatively modest pressures (less than 100 gigapascals). In situ X-ray diffraction experiments can provide insights into the dynamic behaviour of materials, but have only recently been applied to plasticity during shock compression and have yet to provide detailed insight into competing deformation mechanisms. Here we present X-ray diffraction experiments with femtosecond resolution that capture in situ, lattice-level information on the microstructural processes that drive shock-wave-driven deformation. To demonstrate this method we shock-compress the body-centred-cubic material tantalum—an important material for high-energy-density physics owing to its high shock impedance and high X-ray opacity. Tantalum is also a material for which previous shock compression simulations and experiments have provided conflicting information about the dominant deformation mechanism. Our experiments reveal twinning and related lattice rotation occurring on the timescale of tens of picoseconds. In addition, despite the common association between twinning and strong shocks, we find a transition from twinning to dislocation-slip-dominated plasticity at high pressure (more than 150 gigapascals), a regime that recovery experiments cannot accurately access. Lastly, the techniques demonstrated here will be useful for studying shock waves and other high-strain-rate phenomena, as well as a broad range of processes induced by plasticity.

36 MATERIALS SCIENCE↗

Temperature and radiation effects on brittle versus ductile fracture behavior in miscible phase boundaries: insight from atomistic simulations

Temperature- and irradiation-assisted failure mechanisms in miscible phase boundaries are clarified via atomistic calculations. We first establish the temperature-dependent brittle-to-ductile transition in U–Zr miscible phase boundaries. Our results confirm that these boundaries are mostly brittle at low temperatures and ductile at elevated temperatures. We then investigate the changes induced by irradiation on the fracture mechanisms in such phase boundaries. The irradiation-induced defect accumulation follows a multi-stage process that starts with the accumulation of isolated small dislocation loops before transitioning to the saturation and growth of larger dislocation loops and end up with a reorganization into forest dislocations. The accumulation of loops is the primary feature to participate in the delineation between brittle and ductile interfacial fracture in irradiated phase boundaries. At low damage levels, radiation defect interactions with the crack tip are limited and U–Zr miscible boundaries fail through the emission of dislocations ahead of the crack tip followed by brittle cleavage in agreement with the classical Griffith’s criterion for crack stability. At higher damage levels, the failure mode transitions from brittle crack growth to ductile void growth. In this case, the microcrack tip is blunted by the high density of pre-existing, radiation-induced defects in the vicinity of the crack. This interaction leads to the development and growth of a cavity at the interface as opposed to interfacial cleavage.

36 MATERIALS SCIENCE↗

Characterization of defect clusters in ion-irradiated tungsten by X-Ray diffuse scattering

Defect clusters in ion-irradiated tungsten are characterized by X-ray diffuse scattering. Single crystal tungsten samples are irradiated here at 300 K by 0.5–5 MeV copper ions with total doses of 0.2, 0.6, 2, and 5 displacements per atom (DPA). Analysis of the diffuse scattering intensities allows the determination of the concentration of vacancy- and interstitial-type dislocation loops as a function of loop radius for each sample. More vacancies than interstitials are observed in each sample, and the radius of the vacancy loops increases with irradiation dose. For the 0.2DPA sample the average vacancy loop radius is 10.1 ± 3.0 Å with a defect density (counting all atoms in the loops) of ( 10.2 ± 1.5 ) × 10 - 4 per tungsten atom, increasing to an average loop radius of 16.1 ± 3.1 Å at a density of ( 8.5 ± 1.0 ) × 10 - 4 per tungsten atom for the 5DPA sample.

36 MATERIALS SCIENCE↗

Effect of boron concentration on local structure and spontaneous polarization in AlBN thin films

The discovery of ferroelectricity in polar wurtzite-based ternary materials, such as Al 1–x B x N, has attracted attention due to their compatibility with complementary metal–oxide–semiconductor processes and potential use in integrated non-volatile memory devices. However, the origin of ferroelectricity and the fundamental control of the polarization switching in these materials are still under intensive investigation but appear to be related to local disorder induced from the alloying. In this work, we report the effect of boron alloying on the local structure of Al 1–x B x N films deposited by magnetron sputtering. Our results reveal a diminished crystalline order as a function of boron concentration, accompanied by a reduction in the spontaneous polarization. The film disorder is primarily associated with the dissimilar bond lengths between Al–N and B–N and the formation of threading dislocations induced by B incorporation in the structure.

36 MATERIALS SCIENCE↗

Microscopic Distributions of Defect Luminescence From Subgrain Boundaries in Multicrystalline Silicon Wafers

We investigate the microscopic distributions of sub-band-gap luminescence emission (the so-called D-lines D1/D2/D3/D4) and the band-to-band luminescence intensity, near recombination-active sub-grain boundaries in multicrystalline silicon wafers for solar cells. We find that the sub-band-gap luminescence from decorating defects/impurities (D1/D2) and from intrinsic dislocations (D3/D4) have distinctly different spatial distributions, and are asymmetric across the sub-grain boundaries. The presence of D1/D2 is correlated with a strong reduction in the band-to-band luminescence, indicating a higher recombination activity. In contrast, D3/D4 emissions are not strongly correlated with the band-to-band intensity. Based on spatially-resolved, synchrotron-based micro-X-ray fluorescence measurements of metal impurities, we confirm that high densities of metal impurities are present at locations with strong D1/D2 emission but low D3/D4 emission. Finally, we show that the observed asymmetry of the sub-band-gap luminescence across the sub-grain boundaries is due to their inclination below the wafer surface. Based on the luminescence asymmetries, the sub-grain boundaries are shown to share a common inclination locally, rather than be orientated randomly.

14 SOLAR ENERGY↗

Microstructural Defects in SiC Neutron Irradiated at Very High Temperatures

Microstructures in high purity ESiC irradiated with fast neutrons (up to ~9.6 1025 n/m2, in HFIR) at very high temperatures (1130, 1280, and 1460 C) were studied by transmission electron microscopy. Cavities and dislocation loops were generally observed in irradiated samples. The cavities were preferentially formed at grown-in stacking faults, and were spherical in shape below 1280 C and mainly faceted with {111} planes at 1460 C. Estimated volume fractions of observed cavities were much smaller than macroscopic densitometer swelling recently reported, which implies other defects cause the swelling in this temperature regime. Larger Frank loops (>25 nm in radius) formed at 1460 C were identified as interstitial type using the inside/outside method. Unfaulting of the loops was not observed or was very rare. Rapid loop growth and density decrease were observed in the temperature range of 1280-1460 C concurrently with the rapid cavity growth. The limited growth rate of dense loops at lower temperature was discussed in terms of high sink strength estimated from a grain-boundary-loop-denuded zone formed at 1130 C.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Report on Evolution of Inconel 718 Following HFIR Irradiation

The report presents the microstructure and mechanical properties of 3D printed Inconel 718 after irradiation in the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory (ORNL) to assess its potential use as a structural material. The structural components near the outlets of several proposed reactor cores will experience significant neutron fluxes and outlet coolant temperatures ranging from the hot standby temperature of 300 °C to nearly 550 °C at the center of the part. These components must support the core in appropriate loading conditions and require structural analysis at relevant temperatures. In FY21, three heat treatments were designed and conducted to simplify the microstructure and to determine how each precipitating phase contributed to the overall strength. In FY21, baseline mechanical properties were measured from uniaxial tensile tests on subsize SS-J2 specimens at room temperature and at elevated temperatures of 300, 450, and 600 °C to serve a comparison to the irradiated properties. Four capsules containing 3D printed Inconel 718 were inserted into HFIR in FY21 for a matrix of two temperatures and two doses. The lower of the two doses was available for characterization in FY22. Multiple heat treatments of Inconel 718 irradiated to nominal conditions of 2 displacements per atom (dpa) at either 300 or 600 °C were strained with uniaxial tensile tests at the Irradiated Material Examination and Testing (IMET) Facility to discern the mechanical properties. Transmission electron microscopy was performed to correlate the observed mechanical properties with nanoscale features. The initially homogenous AM718-HM increased in strength at both irradiation temperatures based on a high density of nanometer-scale radiation-induced cavities at lower temperature and nucleation and growth of γ" precipitates at higher temperatures. The precipitate-hardened AM718-HT2 showed very small differences in strength before and after irradiation: the contribution to strength from γ" precipitates was replaced with dislocation loops. Because the radioactivity of the nickel superalloys from neutron activation limited the scope of the analysis, a feasibility study examined the possibility of an ultra-miniature specimen geometry, colloquially SS-Tiny (SS-T), for mechanical property determination using the nonirradiated Inconel 718. This study found an overestimation of ductility from the SS-T geometry with yield strength and ultimate tensile strength slightly above the SS-J2 geometry: this could be contributed to a reduction in specimen thickness.

36 MATERIALS SCIENCE↗

The fission track record of Apennine Front KREEP basalts

Whitlockite grains in two Apennine Front KREEP soil fragments contain extremely high densities of fission tracks. A new method is described in which particle tracks are examined in an actinide-poor phase bordering an actinide-rich whitlockite phase. This method clearly distinguishes the fission track contributions from other track sources; e.g., Fe-group cosmic rays, spallation recoils, and dislocations. Observed track excesses, when corrected for U- and Th-related fission sources, are 4-20 times greater than the contribution from spontaneous fission of U-238 (based on an age of 4 b.y.), and probably represent a large and variable contribution from the fission of Pu-244. These fragments may have pre-Imbrium ages, underscoring the importance of KREEP as a constituent of the pre-mare lunar crust. Track excesses are not correlated with the U or Th contents of the whitlockite grains. This behavior suggests that Pu fractionates differently from U and Th in lunar igneous KREEP.

Haines, E. L.↗

Dataset of simulated vibrational density of states and X-ray diffraction profiles of mechanically deformed and disordered atomic structures in Gold, Iron, Magnesium, and Silicon

This dataset is comprised of a library of atomistic structure files and corresponding X-ray diffraction (XRD) profiles and vibrational density of states (VDoS) profiles for bulk single crystal silicon (Si), gold (Au), magnesium (Mg), and iron (Fe) with and without disorder introduced into the atomic structure and with and without mechanical loading. Included with the atomistic structure files are descriptor files that measure the stress state, phase fractions, and dislocation content of the microstructures. All data was generated via molecular dynamics or molecular statics simulations using the Large-scale Atomic/Molecular Massively Parallel Simulator (LAMMPS) code. This dataset can inform the understanding of how local or global changes to a materials microstructure can alter their spectroscopic and diffraction behavior across a variety of initial structure types (cubic diamond, face-centered cubic (FCC), hexagonal close-packed (HCP), and body-centered cubic (BCC) for Si, Au, Mg, and Fe, respectively) and overlapping changes to the microstructure (i.e., both disorder insertion and mechanical loading).

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗