Search NASA⌕ Search

SEARCH · Search NASA

Results for “electronics analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Inclusive Charged-Current Electron Neutrino Interactions in SBND

The Short-Baseline Near Detector (SBND), a 112 ton liquid argon time projection chamber (LArTPC), is the near detector of the Short- Baseline Neutrino Program at Fermilab. Due to its proximity to the Booster Neutrino Beam target, SBND has already seen a record-breaking number of electron neutrino interactions on argon. We present preliminary results from SBND’s differential inclusive electron neutrino charged-current analysis from our first year of beam data, selecting over 2,000 interactions. This analysis will present the largest sample of electron neutrinos on argon to date, as well as the first differential cross section measurement of electron neutrinos. This poster will give an overview of the selection, cross-section extraction, and demonstrate SBND’s detector and electromagnetic shower reconstruction performance through data/MC comparisons.

Tung, Lynn [Chicago U.]↗

Transmission electron microscopy for the evaluation and optimization of crystal growth

The crystallization of protein samples remains the most significant challenge in structure determination by X-ray crystallography. Here, the effectiveness of transmission electron microscopy (TEM) analysis to aid in the crystallization of biological macromolecules is demonstrated. It was found that the presence of well ordered lattices with higher order Bragg spots, revealed by Fourier analysis of TEM images, is a good predictor of diffraction-quality crystals. Moreover, the use of TEM allowed (i) comparison of lattice quality among crystals from different conditions in crystallization screens; (ii) the detection of crystal pathologies that could contribute to poor X-ray diffraction, including crystal lattice defects, anisotropic diffraction and crystal contamination by heavy protein aggregates and nanocrystal nuclei; (iii) the qualitative estimation of crystal solvent content to explore the effect of lattice dehydration on diffraction and (iv) the selection of high-quality crystal fragments for microseeding experiments to generate reproducibly larger sized crystals. Applications to X-ray free-electron laser (XFEL) and micro-electron diffraction (microED) experiments are also discussed.

Stevenson, Hilary P.↗

Characterization of Virgin, Re-used, and Oxygen-reduced Copper Powders processed by the Plasma Spheroidization Process

We report that fabrication of parts with high mechanical properties heavily depend on the quality of powder deployed in the fabrication process. Copper powder in three different powder types were spheroidized using radio-frequency inductively coupled plasma (ICP) spheroidization process (TekSphero-15 system). The characterized powders include virgin powder as purchased from the powder manufacturer, powder used in electron beam powder bed fusion (EB-PBF) process, and reconditioned powder, which was used powder that underwent an oxygen-reduction treatment. The goal of spheroidizing these powder types was to evaluate the change in powder morphology, the possibility of enhancing the powder properties back to their as-received conditions, and assess oxygen reduction of the powder lots given their initial oxygen contents. Also, to investigate the impact of re-spheroidization on powder properties, the second round of spheroidization was performed on the already used-spheroidized powder. The impact of powder type on powder sphericity and particle size distribution was evaluated using the image analysis of scanning electron microscope (SEM) micrographs and laser diffraction, respectively. The spheroidized powder showed higher sphericity and more uniform particle size distribution overall. Depending on the powder collection bin, second round of spheroidization affected the powder sphericity differently. The possibility of deploying the plasma spheroidization process as an alternative oxygen-reduction technique was also investigated through tracking the powders’ oxygen content using inert gas fusion method before and after the spheroidization. The plasma spheroidized powder showed less oxygen content than the hydrogen-treated powder. The second round of spheroidization caused no change in oxygen content. The correlation between oxygen-reduction and created cracks was discussed and compared between plasma spheroidization and hydrogen-treatment. The plasma spheroidization process created a powder with higher sphericity, uniform particle size, and less oxygen content.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Shear-band structure and chemistry in a Zr-based metallic glass probed with nano-beam x-ray fluorescence and transmission electron microscopy

An apparent local change in chemistry in shear-bands can be observed in a Zr-based metallic glass using correlative x-ray fluorescence and electron spectroscopy. Further analysis suggests that this finding is due to the local volumetric change of the shear-band structure. Here, these results emphasize the importance of correlated analytical methods to unambiguously reveal structural and chemical changes caused by strain localization in metallic glasses.

36 MATERIALS SCIENCE↗

CTAB-assisted ultrasonic synthesis, characterization and photocatalytic properties of WO{sub 3}

Highlights: • WO{sub 3} 2D nanostructures were synthesized by ultrasound method assisted with CTAB. • WO{sub 3} morphology was mainly of rectangular nanoplates with a thickness of ∼50 nm. • The highest surface area value of WO{sub 3} was obtained to lowest concentration of CTAB. • WO{sub 3} activity was attributed to morphology, surface area and the addition of CTAB. • WO{sub 3} nanoplates were able to causing almost complete mineralization of rhB and IC. - Abstract: WO{sub 3} 2D nanostructures have been prepared by ultrasound synthesis method assisted with CTAB using different molar ratios. The formation of monoclinic crystal structure of WO{sub 3} was confirmed by X-ray powder diffraction (XRD). The characterization of the WO{sub 3} samples was complemented by analysis of scanning electron microscopy (SEM), which revealed morphology mainly of rectangular nanoplates with a thickness of around 50 nm and length of 100–500 nm. Infrared spectroscopy (FT-IR) was used to confirm the elimination of the CTAB in the synthesized samples. The specific surface area was determinate by the BET method and by means of diffuse reflectance spectroscopy (DRS) it was determinate the band-gap energy (E{sub g}) of the WO{sub 3} samples. The photocatalytic activity of the WO{sub 3} oxide was evaluated in the degradation reactions of rhodamine B (rhB) and indigo carmine (IC) under Xenon lamp irradiation. The highest photocatalytic activity was observed in the samples containing low concentration of CTAB with morphology of rectangular nanoplates and with higher surface area value than commercial WO{sub 3}. Photodegradation of rhB and IC were followed by means of UV–vis absorption spectra. The mineralization degree of organic dyes by WO{sub 3} photocatalyst was determined by total organic carbon analysis (TOC) reaching percentages of mineralization of 92% for rhB and 50% for IC after 96 h of lamp irradiation.

36 MATERIALS SCIENCE↗

Solving the electronic structure problem for over 100000 atoms in real space

Using a real-space high-order finite-difference approach, we investigate the electronic structure of large spherical silicon nanoclusters. Within Kohn-Sham density functional theory and using pseudopotentials, we report the self-consistent field convergence of a system with over 100000 atoms: a Si 107,641 ⁢H 9,084 nanocluster with a diameter of 16 nm. Our approach uses Chebyshev-filtered subspace iteration to speed up the convergence of the eigenspace, and blockwise Hilbert space-filling curves to speed up sparse matrix-vector multiplications, all of which are implemented in the parsec code. For the largest system, we utilized 2048 nodes (114 688 cores) on the Frontera machine in the Texas Advanced Computing Center. Our quantitative analysis of the electronic structure shows how it gradually approaches its bulk counterpart as a function of nanocluster size. The band gap is enlarged due to quantum confinement in nanoclusters, but decreases as the system size increases, as expected. In conclusion, our work serves as a proof of concept for the capacity of the real-space approach in efficiently parallelizing very large calculations using high-performance computer platforms, which can straightforwardly be replicated in other systems with more than 10 5 atoms.

0-dimensional systems↗

Influence of slag chemistry on the hydration of alkali-activated blast-furnace slag - Part I: Effect of MgO

The hydration and the microstructure of three alkali activated slags (AAS) with MgO contents between 8 and 13 wt.% are investigated. The slags were hydrated in the presence of two different alkaline activators, NaOH and Na{sub 2}SiO{sub 3}.5H{sub 2}O (WG). Higher MgO content of the slag resulted in a faster reaction and higher compressive strengths during the first days. The formation of C(- A)-S-H and of a hydrotalcite-like phase was observed in all samples by X-ray diffraction (XRD), thermal analysis (TGA) and scanning electron microscopy (SEM) techniques. Increasing the MgO content of the slag from 8 to 13% increased the amount of hydrotalcite and lowered the Al uptake by C-S-H resulting in 9% higher volume of the hydrates and a 50 to 80% increase of the compressive strength after 28 days and longer for WG activated slag pastes. For NaOH activated slags only a slight increase of the compressive strength was measured.

36 MATERIALS SCIENCE↗

Support Effect on the Low-Temperature Hydrogenation of Benzene over PtCo Bimetallic and the Corresponding Monometallic Catalysts

PtCo bimetallic and Co, Pt monometallic catalysts supported on ?-Al2O3, SiO2, TiO2 and activated carbon (AC) were prepared and evaluated for the hydrogenation of benzene at relatively low temperatures (343 K) and atmospheric pressure. Results from flow reactor studies showed that supports strongly affected the catalytic properties of different bimetallic catalysts. AC supported PtCo bimetallic catalysts exhibited significantly better performance than the other bimetallic catalysts, and all the bimetallic catalysts possessed higher activity than the corresponding monometallic catalysts. Results from CO chemisorption and H2-temperature-programmed reduction (H2-TPR) studies suggested that different catalysts possessed different properties in chemisorption capacity and reduction behavior, and AC supported PtCo catalysts possessed significantly higher CO chemisorption capacity compared to the other catalysts. Extended X-ray absorption fine structure (EXAFS) and transmission electron microscopy (TEM) analysis provided additional information regarding the formation of Pt-Co bimetallic bonds and metallic particle size distribution in the PtCo bimetallic catalysts on different supports.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A green chemical approach to the synthesis of photoluminescent ZnO hollow spheres with enhanced photocatalytic properties

ZnO hollow spheres have been synthesized by a simple and environmentally friendly template assisted route. Starch-derived carbonaceous spheres were used as template, impregnated with Zn(CH{sub 3}COO){sub 2}{center_dot}2H{sub 2}O to obtain zinc-containing precursor spheres and thermally treatment at 600 Degree-Sign C, yielding hollow ZnO spherical shells. The precursor spheres and hollow shells were characterized by X-ray diffraction, FTIR spectroscopy, scanning electron microscopy, thermal analysis and room-temperature photoluminescence measurements. The hollow spherical shells with diameters of {approx}150 nm and wall thickness of {approx}20 nm, are polycrystalline, with a mean crystallite size of 22 nm, exhibiting interesting emission features, with a wide multi-peak band covering blue and green regions of the visible spectrum. The photocatalytic activities (under UV and visible light irradiations) of the ZnO spherical shells evaluated for the phenol degradation reaction in aqueous solutions are outstanding, a total phenol conversion being registered in the case of UV irradiation experiments. - Graphical abstract: The photocatalytic reaction initiated by the photoexcitation of the semiconductor (ZnO), leads to the formation of electron-hole, while part of the electron-hole pairs recombine, some holes combine with water to form {center_dot}OH radicals and some electrons convert oxygen to super oxide radical ({center_dot}O{sub 2}{sup -}). Highlights: Black-Right-Pointing-Pointer Green synthesis of ZnO hollow spheres. Black-Right-Pointing-Pointer Starch-derived carbonaceous spheres as spherical hard template. Black-Right-Pointing-Pointer ZnO hollow spheres with notable visible photoluminescence properties. Black-Right-Pointing-Pointer ZnO hollow spheres with photocatalytical activity in degradation/mineralization of phenol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analysis of stress corrosion cracking in alloy 718 following commercial reactor exposure

Alloy 718 is generally considered a highly corrosion-resistant material but can still be susceptible to stress corrosion cracking (SCC). The combination of factors leading to SCC susceptibility in the alloy is not always clear enough. In this paper, alloy 718 leaf spring (LS) materials that suffered stress corrosion damage during two 24-month cycles in pressurized water reactor service, operated to >45 MWd/mtU burn-up, was investigated. Compared to archival samples fabricated through the same processing conditions, little microstructural and property changes occurred in the material with in-service irradiation, contrary to high dose rate laboratory-based experiments reported in literature. Though the lack of delta phase formation along grain boundaries would suggest a more SCC resistant microstructure, grain boundary cracking in the material was extensive. Crack propagation routes were explored through focused ion beam milling of specimens near the crack tip for transmission electron microscopy as well as in polished plan view and cross-sectional samples for electron backscatter diffraction analysis. It has been shown in this study that cracks propagated mainly along random high-angle grain boundaries, with the material around cracks displaying a high local density of dislocations. The slip lines were produced through the local deformation of the leaf spring material above their yield strength. Also, the cause for local SCC appears to be related to oxidation of both slip lines and grain boundaries, which under the high in-service stresses resulted in crack development in the material.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Multiscale and Multimodal Characterization of 2D Titanium Carbonitride MXene

Here, a comprehensive study on the prototype solid solution phase carbonitride MXene Ti 3 CN is conducted using nuclear magnetic resonance, electron spin resonance, total and quasi-elastic neutron scattering, combined with density functional theory-based electronic structure and molecular dynamic calculations. The combination of experiment and theory lead toward rational atomic structural models of Ti 3 CN. The remnant Al ions from the etching process significantly tune the interlayer spacing, distinct from the more typical MXene, Ti 3 C 2 , prepared similarly. Neutron scattering indicates the surface terminations of Ti 3 CN display high oxygen and fluorine concentrations and rather low hydroxyl and hydrogen concentrations. Calculations show that the structure including both the residual Al ions and mixed surface terminations give the best agreement with the measurements. The water molecules in Ti 3 CN are highly immobile, in strong contrast to those in Ti 3 C 2 . The analysis of the electronic structure suggests that the nitride MXene displays higher conductivity than the carbides. Finally, the absence of hydroxyl groups in terminations, the solid-solution in the anion sites, the remnants within layers, and immobile water altogether make the carbonitrides a unique series in the MXene family, implying a further exploration of their exotic properties and applications in energy storage.

36 MATERIALS SCIENCE↗

Enhanced copper micro/nano-particle mixed paste sintered at low temperature for 3D interconnects

An enhanced copper paste, formulated by copper micro- and nano-particles mixture, is reported to prevent paste cracking and obtain an improved packing density. The particle mixture of two different sizes enables reduction in porosity of the micro-paste and resolves the cracking issue in the nano-paste. In-situ temperature and resistance measurements indicate that the mixed paste has a lower densification temperature. Electrical study also shows a ∼12× lower sheet resistance of 0.27 Ω/sq. In addition, scanning electron microscope image analysis confirms a ∼50% lower porosity, which is consistent with the thermal and electrical results. The 3:1 (micro:nano, wt. %) mixed paste is found to have the strongest synergistic effect. This phenomenon is discussed further. Consequently, the mixed paste is a promising material for potential low temperature 3D interconnects fabrication.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The microstructure of the surface layer of magnesium laser alloyed with aluminum and silicon

The surface layer under analysis was formed as a result of diffusion bonding of a thin AlSi20 plate to a magnesium substrate followed by laser melting. Depending on the process parameters, the laser beam melted the AlSi20 plate only or the AlSi20 plate and a layer of the magnesium surface adjacent to it. Two types of microstructure of the remelted layer were thus analyzed. If the melting zone was limited to the AlSi20 plate, the microstructure of the surface layer was typical of a rapidly solidified hypereutectic Al–Si alloy. Since, however, the liquid AlSi20 reacted with the magnesium substrate, the following intermetallic phases formed: Al{sub 3}Mg{sub 2}, Mg{sub 17}Al{sub 12} and Mg{sub 2}Si. The microstructure of the modified surface layer of magnesium was examined using optical, scanning electron and transmission electron microscopy. The analysis of the surface properties of the laser modified magnesium revealed that the thin layer has a microstructure of a rapidly solidified Al–Si alloy offering good protection against corrosion. By contrast, the surface layer containing particles of intermetallic phases was more resistant to abrasion but had lower corrosion resistance than the silumin type layer. - Highlights: •A CO{sub 2} laser was used for surface alloying of Mg with AlSi20. •Before alloying, an AlSi20 plate was diffusion bonded with the Mg substrate. •The process parameters affected the alloyed layer microstructure and properties. •With melting limited to AlSi20, the layer had a structure of rapidly solidified AlSi20. •Mg–Al and Mg–Si phases were present when both the substrate and the plate were melted.

36 MATERIALS SCIENCE↗

Obstruction and Interference in Low-Energy Models for Twisted Bilayer Graphene

The electronic bands of twisted bilayer graphene (TBLG) with a large-period moiré superlattice fracture to form narrow Bloch minibands that are spectrally isolated by forbidden energy gaps from remote dispersive bands. When these gaps are sufficiently large, one can study a band-projected Hamiltonian that correctly represents the dynamics within the minibands. This inevitably introduces nontrivial geometrical constraints that arise from the assumed form of the projection. Here we show that this choice has a profound consequence in a low-energy experimentally observable signature that therefore can be used to tightly constrain the analytic form of the appropriate low-energy theory. Additionally, we find that this can be accomplished by a careful analysis of the electron density produced by backscattering of Bloch waves from an impurity potential localized on the moiré superlattice scale. We provide numerical estimates of the effect that can guide experimental work to clearly discriminate between competing models for the low-energy band structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Rapid phase synthesis of nanocrystalline cobalt ferrite

Synthesis of single phase nanocrystalline Cobalt Ferrite (CoFe{sub 2}O{sub 4}) was achieved by single step autocombustion technique with the use of citric acid as a chelating agent in mono proportion with metal. Specimens prepared with this method showed significantly higher initial permeability's than with the conventional process. Single phase nanocrystalline cobalt ferrites were formed at very low temperature. Surface morphology identification were carried out by transmission electron microscopy (TEM) analysis. The average grain size and density at low temperature increased gradually with increasing the temperature. The single phase formation is confirmed through powder X-ray diffraction analysis. Magnetization measurements were obtained at room temperature by using a vibrating sample magnetometer (VSM), which showed that the calcined samples exhibited typical magnetic behaviors. Temperature dependent magnetization results showed improved behavior for the nanocrystalline form of cobalt ferrite when compared to the bulk nature of materials synthesized by other methods.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Femtosecond laser direct writing of monocrystalline hexagonal silver prisms

Bottom-up growth methods and top-down patterning techniques are both used to fabricate metal nanostructures, each with a distinct advantage: One creates crystalline structures and the other offers precise positioning. Here, we present a technique that localizes the growth of metal crystals to the focal volume of a laser beam, combining advantages from both approaches. We report the fabrication of silver nanoprisms—hexagonal nanoscale silver crystals—through irradiation with focused femtosecond laser pulses. The growth of these nanoprisms is due to a nonlinear optical interaction between femtosecond laser pulses and a polyvinylpyrrolidone film doped with silver nitrate. The hexagonal nanoprisms have bases hundreds of nanometers in size and the crystal growth occurs over exposure times of less than 1 ms (8 orders of magnitude faster than traditional chemical techniques). Electron backscatter diffraction analysis shows that the hexagonal nanoprisms are monocrystalline. The fabrication method combines advantages from both wet chemistry and femtosecond laser direct-writing to grow silver crystals in targeted locations. The results presented in this letter offer an approach to directly positioning and growing silver crystals on a substrate, which can be used for plasmonic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic and topological properties of the van der Waals layered superconductor PtTe

We report the crystal growth and structural and electronic properties of superconducting, van der Waals layered PtTe. Easily cleavable crystals with a platelike morphology consistent with the layered structure were grown from a platinum-rich flux. A consistent determination of T c = 0.57 K is made from the onset of diamagnetism, the zero of resistivity, and the midpoint of the heat-capacity jump. The observed behavior is consistent with type-II superconductivity, with upper critical field at T = 0 estimated using the Werthamer-Helfand-Hohenberg theory to be 143 and 65 Oe for fields out of and in the plane, respectively. The heat-capacity discontinuity is close to the weak-coupling BCS value. Density-functional theory calculations and analysis of the electronic structure finds that PtTe is a topological semimetal with numerous surface states but suggests that the superconducting state itself may be topologically trivial. Additionally, angle-resolved photoemission spectroscopy reveals a normal-state Fermi surface in remarkable agreement with theory and confirms the overall topological nature of the material by experimental identification of the surface bands. Together, these findings identify PtTe as an interesting example of a cleavable, topological, and superconducting material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principles study of an S = 1 quasi one-dimensional quantum molecular magnetic material

We use density functional theory to study the structural, magnetic, and electronic structures of the organometallic quantum magnet NiCl 2-4 SC (NH 2 ) 2 (DTN). Recent work has demonstrated the quasi one-dimensional nature of the molecular crystal and studied its quantum phase transitions at low temperatures. The system includes a magnetoelectric (ME) coupling and, when doped with Br, the presence of an exotic Bose-glass state. Using the generalized gradient approximation with inclusion of a van der Waals term to account for weak intermolecular forces and by introducing a Hubbard U term to the total energy, we systematically show that our calculations reproduce the magnetic anisotropy, the intermolecular exchange coupling strength, and the magnetoelectric effect in DTN, which have been observed in previous experiments. Further analysis of the electronic structure gives insight into the underlying magnetic interactions, including what mechanisms may be causing the ME effect. Using this computationally efficient model, we predict what effect applying an electric field might have on the magnetic properties of this quantum magnet.

1-dimensional spin chains↗