Search NASA⌕ Search

SEARCH · Search NASA

Results for “evaluation study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Nondestructive evaluation tools and experimental studies for monitoring the health of space propulsion systems

An overview is given of background and information on space propulsion systems on both the programmatic and technical levels. Feasibility experimental studies indicate that nondestructive evaluation tools such as ultrasonic, eddy current and x-ray may be successfully used to monitor the life limiting failure mechanisms of space propulsion systems. Encouraging results were obtained for monitoring the life limiting failure mechanisms for three space propulsion systems; the degradation of tungsten arcjet and magnetoplasmadynamic electrodes; presence and thickness of spallable electrically conducting molybdenum films in ion thrusters; and the degradation of the catalyst in hydrazine thrusters.

Generazio, Edward R.↗

Nondestructive evaluation tools and experimental studies for monitoring the health of space propulsion systems

An overview is given of background and information on space propulsion systems on both the programmatic and technical levels. Feasibility experimental studies indicate that nondestructive evaluation tools such as ultrasonic, eddy current and X-ray may be successfully used to monitor the life limiting failure mechanisms of space propulsion systems. Encouraging results were obtained for monitoring the life limiting failure mechanims for three space propulsion systems: the degradation of tungsten arcjet and magnetoplasmadynamic electrodes; presence and thickness of spallable electrically conducting molybdenum films in ion thrusters; and the degradation of the catalyst in hydrazine thrusters.

Generazio, Edward R.↗

Sensitivity Studies and Experimental Evaluation for Optimizing Transcurium Isotope Production

This work applies to recent initiatives at the Radiochemical Engineering Development Center at Oak Ridge National Laboratory to optimize the production of transcurium isotopes in the High Flux Isotope Reactor in such a way as to prolong the use of high quality heavy curium feedstock. By studying the sensitivity of fission and transmutation reaction rates to the neutron flux spectrum a means of increasing the fraction of (n,γ) reactions per neutron absorption is explored. Filter materials which preferentially absorb neutrons at energies considered detrimental to optimal transcurium production are identified and transmutation rates are examined with high energy resolution. Experimental capsules are irradiated employing filter materials and the resulting fission and activation products studied to validate the filtering methodology. Improvement is seen in the production efficiency of heavier curium isotopes in 244 Cm and 245 Cm targets, and potentially in production of 252 Cf from mixed californium targets. Finally, further analysis is recommended to evaluate longer duration irradiations more representative of typical transcurium production.

07 ISOTOPE AND RADIATION SOURCES↗

FBI fingerprint identification automation study: AIDS 3 evaluation report. Volume 5: Current system evaluation

The performance, costs, organization and other characteristics of both the manual system and AIDS 2 were used to establish a baseline case. The results of the evaluation are to be used to determine the feasibility of the AIDS 3 System, as well as provide a basis for ranking alternative systems during the second phase of the JPL study. The results of the study were tabulated by subject, scope and methods, providing a descriptive, quantitative and qualitative analysis of the current operating systems employed by the FBI Identification Division.

Mulhall, B. D. L.↗

WE-AB-BRA-08: Results of a Multi-Institutional Study for the Evaluation of Deformable Image Registration Algorithms for Structure Delineation Via Computational Phantoms

Purpose: To investigate the accuracy of various algorithms for deformable image registration (DIR), to propagate regions of interest (ROIs) in computational phantoms based on patient images using different commercial systems. This work is part of an Italian multi-institutional study to test on common datasets the accuracy, reproducibility and safety of DIR applications in Adaptive Radiotherapy. Methods: Eleven institutions with three available commercial solutions provided data to assess the agreement of DIR-propagated ROIs with automatically drown ROIs considered as ground-truth for the comparison. The DIR algorithms were tested on real patient data from three different anatomical districts: head and neck, thorax and pelvis. For every dataset two specific Deformation Vector Fields (DVFs) provided by ImSimQA software were applied to the reference data set. Three different commercial software were used in this study: RayStation, Velocity and Mirada. The DIR-mapped ROIs were then compared with the reference ROIs using the Jaccard Conformity Index (JCI). Results: More than 600 DIR-mapped ROIs were analyzed. Putting together all JCI data of all institutions for the first DVF, the mean JCI was 0.87 ± 0.7 (1 SD) while for the second DVF JCI was 0.8 ± 0.13 (1 SD). Several considerations on different structures are available from collected data: the standard deviation among different institutions on specific structure raise as the larger is the applied DVF. The higher value is 10% for bladder. Conclusion: Although the complexity of deformation of human body is very difficult to model, this work illustrates some clinical scenarios with well-known DVFs provided by specific software. CI parameter gives the inter-user variability and may put in evidence the need of improving the working protocol in order to reduce the inter-institution JCI variability.

60 APPLIED LIFE SCIENCES↗

A study of strength evaluations of EDNi/EDCu/NARloy-Z bonded joints

Dissimilar material interfaces can be found in many materials and structural bonds such as composite materials, welded parts, inclusion in matrix, bond between metallic and ceramic materials, and so forth. One of such structural bonds can be seen in the main combustion chamber (MCC) of the Space Shuttle Main Engine (SSME). In this study, from a practical sense, the primary concern is to understand the systems response of EDNi/EDCu/NARloy-Z bonded joints using stress values approximated by the finite element method to determine an influence of the variation of structural bond parameters on the bonded joints, and consequently main combustion chamber of the Space Shuttle Main Engine. The results presented in this study could be an appropriate indicator for a good bond of EDNi/DECu/NARloy-Z layers with the desired thickness of copper deposition in the SSME MCC manufacturing process. Furthermore, the results from this study appear to be applicable to any bonded joints that can be characterized by the parameters and assumptions used in this analysis.

Min, J. B.↗

Orbital transfer vehicle concept definition and system analysis study. Volume 2: OTV concept definition and evaluation. Book 3: Subsystem trade studies

The technical trade studies and analyses reported in this book represent the accumulated work of the technical staff for the contract period. The general disciplines covered are as follows: (1) Guidance, Navigation, and Control; (2) Avionics Hardware; (3) Aeroassist Technology; (4) Propulsion; (5) Structure and Materials; and (6) Thermal Control Technology. The objectives in each of these areas were to develop the latest data, information, and analyses in support of the vehicle design effort.

Dickman, Glen J.↗

Synthesis, in vitro antifungal evaluation and docking studies of novel derivatives of imidazoles and benzimidazoles

A series of imidazole and benzimidazole derivatives was designed and prepared in good yields via convenient and efficient two steps synthetic route using readily available starting materials. The structures of the synthesized compounds and their intermediates were characterized by IR, {sup 1}H-NMR, {sup 13}C-NMR spectroscopy, and MS spectra. The in vitro antifungal activities of the targeted compounds were evaluated against Candida Albicans, Cryptococcus neoformans, Aspergillus niger, and Microsporum gypseum. The results showed that some of these azole-derivatives exhibited good to excellent antifungal activities against the used strains especially C. neoformans and A. niger. For example, compound 6b, 1-[2-Phenyl-2-(3-phenyl-propoxy)-ethyl]-1H-imidazole, was quite effective on the C. neoformans, A. niger, and M. gypseum with MIC 1.95 µg mL{sup −1}. The in silico molecular docking study was also done on the synthesized compounds and the results showed they have minimum binding energy and relatively good affinity toward cytochrome P450. According to the in vitro antifungal results and molecular docking studies, the compounds 6a–d can be selected as lead compounds for further pharmaceutical investigations.

60 APPLIED LIFE SCIENCES↗

A comparative experimental study of IOR potential in fractured shale reservoirs by cyclic water and nitrogen gas injection

Oil production from tight and shale formations accounted for more than half of total U.S. oil production in 2015 (EIA, 2016). Such amount is expected to grow significantly as the active development of low permeability reservoirs continues. Since the primary recovery is becoming less effective and large amounts of oil are locked in matrix, IOR techniques should be considered to face such challenge. Many recent studies have evaluated the potential of gas injection in shale plays. However, few studies discussed the feasibility of water huff-n-puff process. Here this study evaluated the potential of cyclic water injection (CWI) in shale plugs and compared it with the performance of cyclic gas injection (CGI). Eagle Ford core samples were used in this study and saturated with dead shale oil. X-ray diffraction (XRD) technique was employed to analyze the mineral composition of the sample. To reduce clay swelling, 5 wt% of potassium chloride (KCl) solution was used as the injection fluid in CWI tests. Two groups of experiments were performed to examine the effects of soaking time and injection pressure (Pin) on the recovery performance. For one cycle of huff-n-puff, after reaching the Pin, the core plug was soaked with water for a certain time, then the surrounding pressure was released to enter the production period. Under the same operating conditions, CGI tests were conducted to compare the two IOR performances. The CWI experimental results show that soaking time affects the recovery factor (RF) of a single cycle within a certain range, which was similarly concluded from the CGI tests. Injection pressure can affect the recovery performance of CWI significantly. For example, after performing 12 cycles of water huff-n-puff, the RF for tests with Pin of 1000 psi and 5000 psi were 14% and 21%, respectively. When applying 5000 psi, fractures were created on the plug and the size enlarged with further cycles operated. Comparing the two processes of CWI and CGI, different recovery characters can be observed. CWI showed the recovery potential at the first four cycles, and then the incremental oil recovery decreased dramatically in the subsequent cycles. By contrast, CGI presented a more continuous and steady recovery performance with high incremental RF, and then gradually diminished after seven cycles of huff-n-puff processes.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Substituted (E)-2-(2-benzylidenehydrazinyl)-4-methylthiazole-5-carboxylates as dual inhibitors of 15-lipoxygenase & carbonic anhydrase II: synthesis, biochemical evaluation and docking studies

15-Lipoxygenase (15-LOX) plays a major role in many inflammatory lung diseases including chronic obstructive pulmonary disease (COPD), asthma and chronic bronchitis. Over-expression of 15-LOX is related with some specific carcinomas including pancreatic, gastric and brain tumor. Similarly among different isozymes of carbonic anhydrase (CA), CA II is expressed in pancreatic, gastric carcinomas as well as in brain tumors. Therefore, novel potent inhibitors of both 15-LOX and CA II are required to explore the role of these enzymes further and to enable the drug discovery efforts. For this purpose, a series of benzyledinyl-hydrazinyl substituted thiazole derivatives were designed, synthesized and characterized by FTIR, {sup 1}H, &{sup 13}C NMR spectroscopy. The derivatives were then evaluated for their potential to inhibit 15-LOX and bovine carbonic anhydrase II (bCA II). Most of these compounds showed excellent inhibitory potential for 15-LOX with an IC{sub 50} of 0.12 ± 0.002 to 0.69 ± 0.5 μM and showed moderate inhibition potency for bCA II with compound 5h (IC{sub 50} = 1.26 ± 0.24 μM) being the most active. The most potent compound 5a that emerged as a dual inhibitor of both enzymes, exhibiting 24 times greater selectivity for 15-LOX over bCA II. Compound 5a exhibited dual potent inhibitory activity against both 15-LOX and bCA II enzymes having IC{sub 50} values of 0.12 ± 0.002 and 2.93 ± 0.22 μM, respectively. Molecular docking studies of potent as well as dual inhibitors were also carried out to provide an insight into the binding site interactions. - Graphical abstract: Putative binding mode of most potent compound in the active pocket of 15-lipoxygenase. Display Omitted.

60 APPLIED LIFE SCIENCES↗

FBI fingerprint identification automation study: AIDS 3 evaluation report. Volume 6: Environmental analysis

The results of the analysis of the external environment of the FBI Fingerprint Identification Division are presented. Possible trends in the future environment of the Division that may have an effect on the work load were projected to determine if future work load will lie within the capability range of the proposed new system, AIDS 3. Two working models of the environment were developed, the internal and external model, and from these scenarios the projection of possible future work load volume and mixture was developed. Possible drivers of work load change were identified and assessed for upper and lower bounds of effects. Data used for the study were derived from historical information, analysis of the current situation and from interviews with various agencies who are users of or stakeholders in the present system.

Mulhall, B. D. L.↗

Study for fabrication, evaluation, and testing of monolayer woven type materials for space suit insulation

An alternative space suit insulation concept using a monolayer woven pile material is discussed. The material reduces cost and improves the durability of the overgarment, while providing protection similar to that provided by multilayer insulation (MLI). Twelve samples of different configurations were fabricated and tested for compressibility and thermal conductivity as a function of compression loading. Two samples which showed good results in the initial tests were further tested for thermal conductivity with respect to ambient pressure and temperature. Results of these tests were similar to results of the MLI tests, indicating the potential of the monolayer fabric to replace the present MLI. A seaming study illustrated that the fabric can be sewn in a structurally sound seam with minimal heat loss. It is recommended that a prototype thermal meteroid garment be fabricated.

Merrick, E. B.↗

Probing Lipophilic Adamantyl Group as the P1-Ligand for HIV-1 Protease Inhibitors: Design, Synthesis, Protein X-ray Structural Studies, and Biological Evaluation

A series of potent HIV-1 protease inhibitors with a lipophilic adamantyl P1 ligand have been designed, synthesized, and evaluated. We have developed an enantioselective synthesis of adamantane-derived hydroxyethylamine isosteres utilizing Sharpless asymmetric epoxidation as the key step. Various inhibitors incorporating P1-adamantylmethyl in combination with P2 ligands such as 3-(R)-THF, 3-(S)-THF, bis-THF, and THF-THP were examined. The S1' pocket was also probed with phenyl and phenylmethyl ligands. Inhibitor 15d, with an isobutyl P1' ligand and a bis-THF P2 ligand, proved to be the most potent of the series. Lastly, the cLogP value of inhibitor 15d is improved compared to inhibitor 2 with a phenylmethyl P1-ligand. X-ray structural studies of 15d, 15h, and 15i with HIV-1 protease complexes revealed molecular insight into the inhibitor–protein interaction.

59 BASIC BIOLOGICAL SCIENCES↗

Upcycling of post-consumer mixed polyolefin feedstock: An economic and technical evaluation

Here, this study reports techno-economic and life cycle analyses to evaluate the economic and environmental impacts of mechanically recycled PE/PP blends in the presence of rheology modifiers. Additionally, fiber-reinforced composites derived from the compatibilized blends were prepared and evaluated for their performance compared with virgin plastics. Results suggest that compatibilized PE/PP blends exhibit a 70% lower selling price compared to virgin PE. Furthermore, these blends achieved a 74% reduction in greenhouse gas emissions or climate change impact compared to the virgin counterpart. Fiber-reinforced composites from compatibilized PE/PP blends demonstrated improved or comparable mechanical properties relative to composites made from virgin PE/PP blends. Based on their favorable cost and environmental impact, along with performance comparable to virgin composites, compatibilized PP/PE composites made from post-consumer plastics can find applications in large-scale composite manufacturing.

Fiber reinforced plastics (FRP)↗

A systematic review and evaluation of Zika virus forecasting and prediction research during a public health emergency of international concern

Researchers published many studies which sought to predict and forecast important features of Zika virus (ZIKV) infections and their spread during the 2016–2017 ZIKV pandemic. We conducted a comprehensive review of such ZIKV prediction studies and evaluated their aims, the data sources they used, which methods were used, how timely they were published, and whether they provided sufficient information to be used or reproduced by others. Of the 73 studies evaluated, we found the accessibility, reproducibility, timeliness, and incorporation of uncertainty in these published predictions varied; indicating there is substantial room for improvement. We identified that the release of study findings before formal journal publication (‘pre-prints’) increased the timeliness of Zika prediction studies, but note they were infrequently used during this public health emergency. Addressing these areas can improve our understanding of Zika and other outbreaks and ensure forecasts can inform preparedness and response to future outbreaks, epidemics, and pandemics.

59 BASIC BIOLOGICAL SCIENCES↗

Re‐establishing the paradigm for evaluating halide salt compatibility to study commercial chloride salts at 600°C–800°C

Abstract Chloride salts are one candidate for a >700°C concentrating solar power (CSP) cycle, however, many reports from the literature suggest very high reaction rates between chloride salts and structural alloys. Historically, a specific methodology was established for evaluating halide salt compatibility based on solution kinetics. This study returned to that paradigm where the salts are purified and evaluated in sealed capsules before moving to a flowing experiment to determine a true corrosion rate in a temperature gradient for a commercial K–Mg–Na chloride salt. Isothermal testing focused on Ni‐based alloys 230 and 600 at 600°C–800°C. The results indicated there were promising combinations of salt chemistry, temperature, and alloy composition that reduce the extent of reaction. The results of the first monometallic thermal convection loop of alloy 600 run for 1,000 hr with a peak temperature of 700°C showed low attack with rates ≤9 µm/yr.

Pint, Bruce A.↗

A Platform for Innovation and Standards Evaluation: a Case Study from the OpenMRS Open-Source Radiology Information System

Open-source development can provide a platform for innovation by seeking feedback from community members as well as providing tools and infrastructure to test new standards. Vendors of proprietary systems may delay adoption of new standards until there are sufficient incentives such as legal mandates or financial incentives to encourage/mandate adoption. Moreover, open-source systems in healthcare have been widely adopted in low- and middle-income countries and can be used to bridge gaps that exist in global health radiology. Since 2011, the authors, along with a community of open-source contributors, have worked on developing an open-source radiology information system (RIS) across two communities—OpenMRS and LibreHealth. The main purpose of the RIS is to implement core radiology workflows, on which others can build and test new radiology standards. This work has resulted in three major releases of the system, with current architectural changes driven by changing technology, development of new standards in health and imaging informatics, and changing user needs. At their core, both these communities are focused on building general-purpose EHR systems, but based on user contributions from the fringes, we have been able to create an innovative system that has been used by hospitals and clinics in four different countries. We provide an overview of the history of the LibreHealth RIS, the architecture of the system, overview of standards integration, describe challenges of developing an open-source product, and future directions. Our goal is to attract more participation and involvement to further develop the LibreHealth RIS into an Enterprise Imaging System that can be used in other clinical imaging including pathology and dermatology.

61 RADIATION PROTECTION AND DOSIMETRY↗