Search NASA⌕ Search

SEARCH · Search NASA

Results for “formative process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Nucleation and growth of blue phase liquid crystals on chemically-patterned surfaces: a surface anchoring assisted blue phase correlation length

In condensed matter, the correlation length is an essential parameter which describes the distance over which a material maintains its structural properties. In liquid crystals, for the orientational order parameter this characteristic length is of the order of nanometers, while in solid crystals it can extend to macroscopic length scales. Here, we report the measurement of the correlation length, or persistence length, of the crystallographic orientation of blue phases (BPs)—chiral liquid crystals with long-range 3D-crystalline structures and submicron-sized lattice-parameters. These materials exhibit phase transformations that have been identified as the liquid analog of crystal-crystal martensitic transformations. In this work, we use liquid epitaxial growth to achieve spontaneous BP-crystal nucleation and subsequent growth. Specifically, we design patterned substrates made of a binary array of regions with different liquid crystal anchoring, which facilitate a uniform nucleation and growth of BP-crystals with (100)-lattice orientation and a simple cubic symmetry. Furthermore, our results indicate that this simple cubic BP, the so-called blue phase II (BPII), forms first on the patterned surface, thereby propagating the growth of domains in directions parallel or perpendicular to the patterned regions. These results are used to understand the emergence of a surface anchoring assisted BPII-correlation length, taken as the distance over which the BP preserves its lattice orientation, as a function of time and pattern characteristics. We found that BPII single crystals can be achieved on patterned regions whose lateral dimensions are equal to or larger than 10 μm, consistent with our measurements of the BPII-correlation length. This newly acquired understanding of the role of surfaces on the formation of BPs is then used to design processes that permit formation of macroscopically large mono-domain, single-crystal BPs by relying on significantly reduced patterned areas (only part of the area is patterned), a feature that could benefit the applications of this intriguing class of materials.

correlation length↗

Lattice Boltzmann-Based Approaches for Pore-Scale Reactive Transport

Here an important geoscience and environmental applications such as geologic carbon storage, environmental remediation, and unconventional oil and gas recovery are best understood in the context of reactive flow and multicomponent transport in the subsurface environment. The coupling of chemical and microbiological reactions with hydrological and mechanical processes can lead to complex behaviors across an enormous range of spatial and temporal scales. These coupled responses are also strongly influenced by the heterogeneity and anisotropy of the geologic formations. Reactive transport processes can change the pore morphology at the pore scale, thereby leading to nonlinear interactions with advective and diffusive transport, which can strongly influence larger-scale properties such as permeability and dispersion.

58 GEOSCIENCES↗

IWG_CACTI

The Interagency Working Group for Airborne Data and Telemetry Systems (IWGADTS) is developing a suite of tools to promote standardization of instrument interface, data format and data processing. ARM Arial Facility uses the IWGADTS ("IWG1") format and the detailed information can be found at: http://www.eol.ucar.edu/iwgadts.

54 ENVIRONMENTAL SCIENCES↗

The role of horizontal transport as evaluated from the Apollo 15 and 16 orbital experiments

Despite the large amount of accumulated data there is still considerable debate about the role of various processes in the formation of the lunar surface. One of the processes frequently discussed is that of horizontal transport and how it affected surface chemistry and surface features. The orbital experiments flown on Apollo 15 and 16 enable us to consider the extent of horizontal transport. In particular, the X-ray experiment because of its low penetration depth permits us to make at least crude estimates of the extent of horizontal transport.

Adler, I.↗

User's guide: Programs for processing altimeter data over inland seas

The programs described were developed to process GEODYN-formatted satellite altimeter data, and to apply the processed results to predict geoid undulations and gravity anomalies of inland sea areas. These programs are written in standard FORTRAN 77 and are designed to run on the NSESCC IBM 3081(MVS) computer. Because of the experimental nature of these programs they are tailored to the geographical area analyzed. The attached program listings are customized for processing the altimeter data over the Black Sea. Users interested in the Caspian Sea data are expected to modify each program, although the required modifications are generally minor. Program control parameters are defined in the programs via PARAMETER statements and/or DATA statements. Other auxiliary parameters, such as labels, are hard-wired into the programs. Large data files are read in or written out through different input or output units. The program listings of these programs are accompanied by sample IBM job control language (JCL) images. Familiarity with IBM JCL and the TEMPLATE graphic package is assumed.

Au, A. Y.↗

Formation mechanism and optimization of highly luminescent N-doped graphene quantum dots

Photoluminescent graphene quantum dots (GQDs) have received enormous attention because of their unique chemical, electronic and optical properties. Here a series of GQDs were synthesized under hydrothermal processes in order to investigate the formation process and optical properties of N-doped GQDs. Citric acid (CA) was used as a carbon precursor and self-assembled into sheet structure in a basic condition and formed N-free GQD graphite framework through intermolecular dehydrolysis reaction. N-doped GQDs were prepared using a series of N-containing bases such as urea. Detailed structural and property studies demonstrated the formation mechanism of N-doped GQDs for tunable optical emissions. Hydrothermal conditions promote formation of amide between –NH2 and –COOH with the presence of amine in the reaction. The intramoleculur dehydrolysis between neighbour amide and COOH groups led to formation of pyrrolic N in the graphene framework. Further, the pyrrolic N transformed to graphite N under hydrothermal conditions. N-doping results in a great improvement of PL quantum yield (QY) of GQDs. By optimized reaction conditions, the highest PL QY (94%) of N-doped GQDs was obtained using CA as a carbon source and ethylene diamine as a N source. The obtained N-doped GQDs exhibit an excitation-independent blue emission with single exponential lifetime decay.

NANOPARTICLES↗

Development of metallization process. FSA project, cell and module formation research area

New pastes were evaluated that contained additives to aid in the silicon-to-metallization contact. None were completely successful. A reevaluation of the molybdenum oxide paste and the two-step screen printing process was done. The oxide paste did not show promise. The two-step process enabled soldering of the cells but the cells still had a high series resistance. Pastes are on order from a different manufacturer.

Garcia, A., III↗

Defect-Enhanced Charge Transfer by Ion-Solid Interactions in SiC using Large-Scale Ab Initio Molecular Dynamics Simulations

Large-scale ab initio molecular dynamics simulations of ion-solid interactions in SiC reveal that significant charge-transfer occurs between atoms and defects can enhance charge transfer to surrounding atoms. The results demonstrate that charge transfer to and from recoiling atoms can alter the energy barriers and dynamics for stable defect formation. The present simulations illustrate in detail the dynamic processes for charged defect formation. The averaged values of displacement threshold energies along four main crystallographic directions are smaller than those determined by empirical potentials due to charge transfer effects on recoil atoms.

36 MATERIALS SCIENCE↗

Numerical Study Of Melted Particles Crush Metallic Substrates And The Interaction Between Particles And A Plasma Beam In The Thermal Projection Process

Plasma spray processes have been widely used to produce high performance coatings of a wide range of Materials (metallic, non-metallic, ceramics), offering protection from, eg. wear, extreme temperature, chemical attack and environmental corrosion. To obtain good quality coatings, spray parameters must be carefully selected. Due to the large variety in process parameters, it is difficult to optimize the process for each specific coating and substrate combinations. Furthermore modelling the spray process allows a better understanding of the process sequences during thermal spraying. Good agreement of the virtual spraying process with the real coating formation is achieved by modelling the particular process steps. The simulation of coating formation to estimate the process parameters is an important tool to develop new coating structures with defined properties. In this work, the process of plasma sprayed coating has been analyzed by numerical simulation. Commercial code is used to predict the plasma jet characteristics, plasma--particle interaction, and coating formation. Using this model we can obtain coating microstructure and characteristics which form a foundation for further improvement of an advanced ceramic coating build up model.

36 MATERIALS SCIENCE↗

Understanding the Factors Affecting the Formation of Carbonyl Iron Electrodes in Rechargeable Alkaline Iron Batteries

Rechargeable iron-based alkaline batteries such as iron - air and nickel - iron batteries are attractive for large-scale electrical energy storage because iron is inexpensive, globally-abundant and environmentally-friendly. Further, the iron electrode is known for its robustness to repeated charge/discharge cycling. During manufacturing these batteries are charged and discharged 20 to 50 times during which the discharge capacity of the iron electrode increases gradually and attains a stable value. This process of achieving stable capacity is called formation. In this study we have focused our efforts on understanding the effect of electrode design on formation. We have investigated the role of wetting agent, pore-former additive, and sulfide additive on the formation of carbonyl iron electrodes. The wetting agent increased the rate of formation while the pore-former additive increased the final capacity. Sodium sulfide added to the electrolyte worked as a de-passivation agent and increased the final discharge capacity. We have proposed a phenomenological model for the formation process that predicts the rate of formation and final discharge capacity given the design parameters for the electrode. The understanding gained here will be useful in reducing the time lost in formation and in maximizing the utilization of the iron electrode. (C) 2012 The Electrochemical Society. [DOI: 10.1149/2.021301jes] All rights reserved.

Manohar, AK↗

Modeling nitrogen chemistry in combustion

Understanding of the chemical processes that govern formation and destruction of nitrogen oxides (NO x ) in combustion processes continues to be a challenge. Even though this area has been the subject of extensive research over the last four decades, there are still unresolved issues that may limit the accuracy of engineering calculations and thereby the potential of primary measures for NO x control. In this review our current understanding of the mechanisms that are responsible for combustion-generated nitrogen-containing air pollutants is discussed. The thermochemistry of the relevant nitrogen compounds is updated, using the Active Thermochemical Tables (ATcT) approach. Rate parameters for the key gas-phase reactions of the nitrogen species are surveyed, based on available information from experiments and high-level theory. The mechanisms for thermal and prompt-NO, for fuel-NO, and NO formation via NNH or N 2 O are discussed, along with the chemistry of NO removal processes such as reburning and Selective Non-Catalytic Reduction of NO. Each subset of the mechanism is evaluated against experimental data and the accuracy of modeling predictions is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interpreting mixing relationships in energetic melts to estimate vapor contribution and composition

Heterogeneous, glassy debris can be produced by energetic events such as near surface nuclear explosions and asteroid impacts. In these events, the resultant debris comprises a rapidly-cooled mixture of the projectile or bomb material with proximate materials such as soil and anthropogenic structures. Glasses formed in these events preserve inter and/or intra sample compositional variation reflecting complex mixtures of the precursor materials or their chemically fractionated products. Understanding formation mechanisms and chemical processes relating to energetic glass formation based on study of the end products requires an objective method for calculating the precursor components that mixed together to produce the final product. Here, we compare a set of multivariate linear-least squares approaches to address the unmixing problem of heterogeneous glasses including classical least squares (CLS), principal component analysis (PCA) and two multivariate curve resolution – alternating least squares (MCR-ALS) approaches. We generate a synthetic data set representing spatially resolved, compositional data in a set of heterogeneously mixed glasses to understand model sensitivity to precursor abundance and composition. We explore the impact of incomplete knowledge of the system prior to the formation of the melts on the resulting confidence and accuracy of the solution (i.e., the number, composition, and abundances of the precursor materials). We conclude that a closure and equality constrained MCR-ALS approach succeeds in identifying unrecognized precursor components and is a suitable alternative to CLS approaches when the investigator has incomplete knowledge of the starting precursor chemical compositions. Finally, we demonstrate application of this MCR-ALS approach to measurements of Trinitite.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

PERSPECTIVES ON INTRACLUSTER ENRICHMENT AND THE STELLAR INITIAL MASS FUNCTION IN ELLIPTICAL GALAXIES

Stars formed in galaxy cluster potential wells must be responsible for the high level of enrichment measured in the intracluster medium (ICM); however, there is increasing tension between this truism and the parsimonious assumption that the stars in the generally old population studied optically in cluster galaxies emerged from the same formation sites at the same epochs. We construct a phenomenological cluster enrichment model to demonstrate that ICM elemental abundances are underestimated by a factor >2 for standard assumptions about the stellar population-a discrepancy we call the ''cluster elemental abundance paradox''. Recent evidence of an elliptical galaxy initial mass function (IMF) skewed to low masses deepens the paradox. We quantify the adjustments to the star formation efficiency and IMF, and Type Ia supernovae (SNIa) production efficiency, required to resolve this while being consistent with the observed ICM abundance pattern. The necessary enhancement in metal enrichment may, in principle, originate in the observed stellar population if a larger fraction of stars in the supernova-progenitor mass range form from an IMF that is either bottom-light or top-heavy, with the latter in some conflict with observed ICM abundance ratios. Other alternatives that imply more modest revisions to the IMF, mass return and remnant fractions, and primordial fraction, posit an increase in the fraction of 3-8 M{sub Sun} stars that explode as SNIa or assume that there are more stars than conventionally thought-although the latter implies a high star formation efficiency. We discuss the feasibility of these various solutions and the implications for the diversity of star formation in the universe, the process of elliptical galaxy formation, and the origin of this ''hidden'' source of ICM metal enrichment.

79 ASTRONOMY AND ASTROPHYSICS↗

Low cost processes for fabricating silicon solar cells

Solar cell fabrication processes, in particular junction formation and metallization, are evaluated in terms of cell efficiencies, process yields, module packing factors, and energy cost effectiveness. It is shown that for junction formation, the diffusion processes provide a relatively low-cost approach. The costs per unit cell area can be further reduced by increased wafer area and mechanized wafer handling. The costs for a large number of metallization processes, excluding the costs of the metal, are roughly comparable. However, their varying influence on cell performance leads to a significant spread in the allowable process costs.

Goldman, H.↗

Central peaks in Mercurian craters - Comparisons to the moon

A key question in cratering studies continues to be the mode of formation of central structures. Studies of central peaks, the smallest and simplest central features found in impact structures, could provide clues to the formational mechanisms of the entire morphologic sequence of central features. The present investigation is concerned with a systematic examination of central peaks in fresh Mercurian craters, and a comparison of Mercurian and lunar central peak morphometry and morphology. It is found that the central peak diameter/rim diameter relation on Mercury is indistinguishable from the lunar case. The gravitational field strength of the planet, therefore, does not appear to be the dominant force controlling central peak formation. Of the presently proposed processes for central peak formation, dynamic rebound best fits current observations.

Hale, W.↗

OPTIMIZING MEASUREMENTS OF THE NEAR-SURFACE WATER CYCLE ON MARS: INSIGHTS FOR HABITABILITY.

The Martian regolith may act as a sink and source of water vapor for the lower atmosphere through processes such as frost formation, physisorption, solid-state hydration, and brine formation [e.g., 1- 12]. These processes are all dependent on temperature and humidity, as well as regolith properties such as porosity, tortuosity, and composition. In particular, the salty nature of the Martian regolith may increase its role in atmosphere-regolith interactions as hygroscopic salts interact with the ambient water vapor. Although to date experimental works near Mars-relevant conditions have constrained some of the potential effects of a salty regolith on water vapor exchange processes [e.g., 13-18], vital in situ measurements are lacking to link these to the near-surface water cycle on Mars. This is because previous and ongoing environmental payloads for landed Mars missions were not designed to investigate atmosphere-regolith exchange processes [12, 19-20]. Resolving the Martian near-surface water cycle is relevant to both climatic processes and astrobiology. There is the potential to presently form (meta)stable brines on Mars; their stability would be largely controlled by water vapor exchange processes [9, 21]. Here we argue for optimizing in situ measurements of water vapor exchange processes and regolith properties to advance our understanding of the local scale Martian water cycle and inform habitability studies.

E G Rivera-Valentin↗

Community Plan for Far-Infrared/Submillimeter Space Astronomy

This paper represents the consensus view of the 124 participants in the Second Workshop on New Concepts for Far-Infrared/Submillimeter Space Astronomy.We recommend that NASA pursue the vision for far-IR astronomy outlined in the NAS Decadal Survey, which said: A rational coordinated program for space optical and infrared astronomy would build on the experience gained with NGST1 to construct [a JWST-scale filled-aperture far-IR telescope SAFIR, and then ultimately, in the decade 2010 to 2020, build on the SAFIR, TPF, and SIM experience to assemble a space-based, far-infrared interferometer. SAFIR will study star formation in the young universe, the buildup of elements heavier than hydrogen over cosmic history, the process of galaxy formation, and the early phases of star formation, which occur behind a veil of dust that precludes detection at mid IR and shorter wavelengths. The far-infrared interferometer will resolve distant galaxies to study protogalaxy interactions and mergers and the processes that led to enhanced star formation activity and the formation of Active Galactic Nuclei, and will resolve protostars and debris disks in our Galaxy to study how stars and planetary systems form.

Ade, Peter↗

NEUTRINO CONSTRAINTS TO THE DIFFUSE GAMMA-RAY EMISSION FROM ACCRETION SHOCKS

Accretion of gas during the large-scale structure formation has been thought to give rise to shocks that can accelerate cosmic rays. This process then results in an isotropic extragalactic gamma-ray emission contributing to the extragalactic gamma-ray background (EGRB) observed by Fermi-LAT. Unfortunately, this emission has been difficult to constrain and thus presents an uncertain foreground to any attempts to extract a potential dark matter signal. Recently, IceCube has detected high-energy isotropic neutrino flux that could be of an extragalactic origin. In general, neutrinos can be linked to gamma rays since cosmic-ray interactions produce neutral and charged pions where neutral pions decay into gamma rays, while charged pions decay to give neutrinos. By assuming that isotropic high-energy IceCube neutrinos are entirely produced by cosmic rays accelerated in accretion shocks during the process of structure formation, we obtain the strongest constraint to the gamma-ray emission from large-scale structure formation (strong) shocks and find that they can make at best ∼20% of the EGRB, corresponding to neutrino flux with spectral index α{sub ν} = 2, or ∼10% for spectral index α{sub ν} = 2.46. Since typical objects where cosmic rays are accelerated in accretion shocks are galaxy clusters, observed high-energy neutrino fluxes can then be used to determine the gamma-ray emission of a dominant cluster type and constrain acceleration efficiency, and thus probe the process of large-scale structure formation.

79 ASTRONOMY AND ASTROPHYSICS↗