Search NASA⌕ Search

SEARCH · Search NASA

Results for “interlayer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Intercalation of IR absorber into layered double hydroxides: Preparation, thermal stability and selective IR absorption

Highlights: Black-Right-Pointing-Pointer PMIDA anions were intercalated into Mg{sub 2}Al-NO{sub 3} LDH by anion-exchange method. Black-Right-Pointing-Pointer The prepared material has highly selective IR absorption property in 9-11 {mu}m. Black-Right-Pointing-Pointer The obtained material has practical applications as heat-retaining additive. -- Abstract: N-phosphonomethyl aminodiacetic acid (PMIDA) was intercalated into the interlayer spacing of layered double hydroxides (LDH) by an anion-exchange method. The intercalated LDHs were characterized by various techniques such as powder X-ray diffraction (XRD), FT-IR spectroscopy, elemental analysis and simultaneous thermogravimetric and mass spectrometry (TG-MS) in details. The results show the formation of Mg{sub 2}Al-PMIDA LDH based on the expansion of d-spacing from 0.89 nm to 1.22 nm and the disappearance of the characteristic IR absorption band at 1384 cm{sup -1} for NO{sub 3}{sup -} anions. The incorporation of Mg{sub 2}Al-PMIDA LDH into the low density polyethylene (LDPE) as an additive enhances the selectivity of IR absorption in the main wavelength region 9-11 {mu}m for radiant heat loss at night. Mg{sub 2}Al-PMIDA LDH as a heat-retaining additive has practical application in agricultural plastic films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Room temperature oxidative intercalation with chalcogen hydrides: Two-step method for the formation of alkali-metal chalcogenide arrays within layered perovskites

Highlights: ► Topochemical reactions involving intercalation allow construction of metal chalcogenide arrays within perovskite hosts. ► Gaseous chalcogen hydrides serve as effect reactants for intercalation of sulfur and selenium. ► New compounds prepared by a two-step intercalation strategy are presented. -- Abstract: A two-step topochemical reaction strategy utilizing oxidative intercalation with gaseous chalcogen hydrides is presented. Initially, the Dion-Jacobson-type layered perovskite, RbLaNb{sub 2}O{sub 7}, is intercalated reductively with rubidium metal to make the Ruddlesden-Popper-type layered perovskite, Rb{sub 2}LaNb{sub 2}O{sub 7}. This compound is then reacted at room-temperature with in situ generated H{sub 2}S gas to create Rb-S layers within the perovskite host. Rietveld refinement of X-ray powder diffraction data (tetragonal, a = 3.8998(2) Å, c = 15.256(1) Å; space group P4/mmm) shows the compound to be isostructural with (Rb{sub 2}Cl)LaNb{sub 2}O{sub 7} where the sulfide resides on a cubic interlayer site surrounded by rubidium ions. The mass increase seen on sulfur intercalation and the refined S site occupation factor (∼0.8) of the product indicate a higher sulfur content than expected for S{sup 2−} alone. This combined with the Raman studies, which show evidence for an H-S stretch, indicate that a significant fraction of the intercalated sulfide exists as hydrogen sulfide ion. Intercalation reactions with H{sub 2}Se{sub (g)} were also carried out and appear to produce an isostructural selenide compound. The utilization of such gaseous hydride reagents could significantly expand multistep topochemistry to a larger number of intercalants.

36 MATERIALS SCIENCE↗

Preparation and neutron diffraction study of Dion-Jacobson type oxynitrides LiLaTa{sub 2}O{sub 7−3x}N{sub 2x} (x = 0.09, 0.29)

Highlights: ► Dion-Jacobson oxynitrides LiLaTa{sub 2}O{sub 7−3x}N{sub 2x}□{sub x} (x < 0.3) by ammonolysis of LiLaTa{sub 2}O{sub 7}. ► Enhanced thermal stability and band gap narrowing by the oxynitride modification. ► Locations of N and □ within LiLaTa{sub 2}O{sub 7−3x}N{sub 2x} by neutron diffraction and {sup 7}Li MAS NMR. -- Abstract: Ammonolytic heating of Dion-Jacobson type layered perovskite LiLaTa{sub 2}O{sub 7} produced oxynitride derivatives LiLaTa{sub 2}O{sub 7−3x}N{sub 2x}□{sub x}via the substitution, 3O{sup 2−} → 2N{sup 3−} + □. The nitridation level increased with raising the temperature and/or increasing the time of reaction, reaching the limit at x ≈ 0.3 by the ammonolysis at 650 °C for 48 h. Upon the nitridation, tetragonal pristine lattice underwent a axis expansion together with c axis contraction. Neutron Rietveld refinement of LiLaTa{sub 2}O{sub 7} and LiLaTa{sub 2}O{sub 7−3x}N{sub 2x} (x = 0.09, 0.29) revealed that the Li-centered tetrahedra are gradually compressed along the 2-fold rotation axis, with the increase of x. Solid state {sup 7}Li nuclear magnetic resonance spectroscopy suggested that the anion vacancy resides mostly on the interlayer surface of perovskite block. As measured from the diffuse-reflectance spectroscopy, the nitridation induced marked reduction in the band gap magnitude, from 4.11 eV (x = 0) to 3.35 eV (x = 0.09) to 2.76 eV (x = 0.29).

36 MATERIALS SCIENCE↗

Modeling of alkyl quaternary ammonium cations intercalated into montmorillonite lattice

Highlights: ► The modification of montmorillonites by three surfactants increases the basal spacing. ► The model proposed show a bilayer conformation for the surfactant ODTMA. ► The DODMA and TOMA surfactants adopt a paraffin type arrangement. ► Behavior of surfactants in interlayer space was confirmed by TGA and ATR analysis. - Abstract: The objective of this work was to study the conformation of the quaternary ammonium cations viz., octadecyl trimethyl ammonium (ODTMA), dioctadecyl dimethyl ammonium (DMDOA) and trioctadecyl methyl ammonium (TOMA) intercalated within montmorillonite. The modified montmorillonite was characterized by X-ray diffraction in small angle (SAXS), thermal analysis (TGA) and infrared spectroscopy of attenuated total reflection (ATR). The modification of organophilic montmorillonites by the three surfactants ODTMA, DMDOA and TOMA increases the basal spacing from their respective intercalated distances of 1.9 nm, 2.6 nm and 3.4 nm respectively. The increase in the spacing due to the basic organic modification was confirmed by the results of thermal analysis (TGA) and infrared spectroscopy (ATR), and also supported by theoretical calculations of longitudinal and transversal chain sizes of these alkyl quaternary ammonium cations.

36 MATERIALS SCIENCE↗

Nanosized Ni–Al layered double hydroxides—Structural characterization

Highlights: ► The takovite anionic clays were obtained using the sol–gel method. ► The effect of samples’ composition on the structural and textural characteristics has been investigated. ► X-ray analysis. ► FTIR spectroscopy evidenced a disordered interlayer structure. ► FESEM and TEM analysis showed that the samples have high porosity. - Abstract: Takovite, a natural mineral with the formula Ni{sub 6}Al{sub 2}(OH){sub 6}CO{sub 3}·5H{sub 2}O belongs to the large class of layered double hydroxides (LDHs) and contains positively charged Ni(II) and Al(III) layers alternating with layers containing carbonate ions and water molecules. Mesoporous takovite-type layered double hydroxides (LDH) of the general formula [Ni{sub 1−x}Al{sub x}(OH){sub 2}]{sup x+}(CO{sub 3}{sup 2−}){sub x/2}·nH{sub 2}O with different Ni/Al molar ratios (1.9–2.8) have been successfully synthesized by the sol–gel method, followed by anionic exchange using nickel acetylacetonate and aluminum isopropylate as cation precursors. A single LDH phase and an anisotropic growth of very small crystallites (below 4 nm) have been evidenced by X-ray diffraction. The effect of samples’ composition on their structural and textural characteristics has been investigated. The BET surface area values are in the range of 100–122 m{sup 2}/g. BJH pore radius decreased with increase in the Al(III) content in the LDHs. FESEM micrographs show large aggregates of highly porous LDH particles, while TEM analysis reveals irregular agglomerates of crystallites, among which some of them displayed a developing hexagonal shape. The average particle size variation with the Al(III) content in the samples follows the same trend as the pore radius, the sample with the highest Ni/Al ratio displaying also the smallest particle size. This sample becomes even more interesting, since TEM analysis shows agglomerates with inside circular structures, feature not observed for the other Ni/Al ratios investigated.

36 MATERIALS SCIENCE↗

Synthesis and characterization of O3-Na{sub 3}LiFeSbO{sub 6}: A new honeycomb ordered layered oxide

Highlights: • A new honeycomb ordered layered oxide Na{sub 3}LiFeSbO{sub 6} was synthesized. • This compound crystallizes in the C2/c space group. • Disorder in the honeycomb arrangement of Li and Fe is present. - Abstract: A new compound Na{sub 3}LiFeSbO{sub 6} has been synthesized by conventional solid state methods and investigated using X-ray diffraction, DC magnetic susceptibility, {sup 57}Fe Mössbauer spectroscopy and optical measurements. This compound crystallizes in a monoclinic unit cell and is related to a family of honeycomb ordered layered oxide materials where Na{sup +} fills octahedral interlayer sites between Li{sub 1/3}Fe{sub 1/3}Sb{sub 1/3}O{sub 2} slabs of edge sharing octahedra. Each SbO{sub 6} octahedron is surrounded by LiO{sub 6} and FeO{sub 6} octahedra creating a honeycomb arrangement within the slabs. Powder X-ray diffraction indicates the presence of stacking faults. This compound exhibits Curie–Weiss behavior at high temperatures and the effective magnetic moment verifies the presence of high spin Fe{sup 3+}. The {sup 57}Fe Mössbauer spectroscopy confirms Fe{sup 3+} in an octahedral position and indicates disorder in the arrangement of LiO{sub 6} and FeO{sub 6} octahedra in the Li{sub 1/3}Fe{sub 1/3}Sb{sub 1/3}O{sub 2} slabs.

36 MATERIALS SCIENCE↗

The influence of a silica pillar in lamellar tetratitanate for selective catalytic reduction of NO{sub x} using NH{sub 3}

Highlights: • Potassium ions significantly affected the SCR. • The introduction of silica in the catalyst promotes the NH{sub 3}-SCR reaction. • The catalysts activities were not significantly influenced by SO{sub 2} addition. - Abstract: Silica-pillared layered titanate (SiO{sub 2}–Ti{sub 4}O{sub 9}) was prepared by intercalating organosilanes into the interlayers of a layered K{sub 2}Ti{sub 4}O{sub 9} followed by calcination at 500 °C. The lamellar titanates produced were used as a support to prepare vanadium catalysts (1 and 2 wt%) through wet impregnation for selective catalytic reduction (SCR) of NO. The catalysts were characterized using nitrogen adsorption (BET), X-ray diffraction (XRD), temperature programmed reduction (H{sub 2}-TPR), nuclear magnetic resonance ({sup 29}Si NMR), and infrared spectroscopy (FT-IR). Reduction of NO by NH{sub 3} was studied in a fixed-bed reactor packed with the catalysts and fed a mixture comprising 1% NH{sub 3}, 1% NO, 10% O{sub 2}, and 34 ppm SO{sub 2} (when used) in helium. The results demonstrate that activity is correlated with the support, i.e., with acidic strength of catalysts. The potassium in the support, K{sub 2}Ti{sub 4}O{sub 9}, significantly affected the reaction and level of vanadium species reduction. The catalyst (1VSiT) with 1 wt% vanadium impregnated on the SiO{sub 2}–Ti{sub 4}O{sub 9} support reduced ∼80% of the NO. Approximately the same conversion rate was generated on the catalyst (2VSiT) with 2 wt% vanadium using the same support. The increased NH{sub 3} adsorption demonstrate that introduction of silica in the catalyst promotes the NH{sub 3}-SCR reaction. More importantly, 2VSiT and 1VSiT were strongly resistant to SO{sub 2} poisoning.

36 MATERIALS SCIENCE↗

Synthesis and characterization of α-MoO{sub 3} nanobelt composite positive electrode materials for lithium battery application

Graphical abstract: (a) TEM image of MoO{sub 3}/PEO nanobelts composite, (b) CV curves of MoO{sub 3}/PEO nanobelts composite. - Highlights: • α-MoO{sub 3} and PEO surfactant MoO{sub 3} nanobelts were synthesized by solvothermal method. • The capacity retention of 12.5 wt% PEO surfactant MoO{sub 3} nanobelts is 88.78%. • The specific capacity of 12.5 wt% PEO surfactant MoO{sub 3} nanobelts is 352 mAh g{sup −1}. • MoO{sub 3}/PEO nanobelts composite material demonstrates good cycling stability as cathode. - Abstract: α-MoO{sub 3} and PEO surfactant MoO{sub 3} nanobelts were synthesized by a solvothermal method. The morphology and nanostructure of samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Bare α-MoO{sub 3} and 12.5 wt% PEO surfactant MoO{sub 3} nanobelts have an initial specific capacities of 279 and 352 mAh g{sup −1}, respectively, at constant current density 30 mA g{sup −1} with potential range of 1.5–4.0 V vs. Li/Li{sup +}. While MoO{sub 3} is modified by the intercalation of PEO, it is effectively shielded against electrostatic interaction between the MoO{sub 3} interlayer and Li{sup +} ions. We reported positive material, a nanocomposite of MoO{sub 3} coated with polyethylene oxide. It presents good cycling stability due to existence of the conductive and protective polyethylene oxide coating and the nanobelt morphology of MoO{sub 3}. The polyethylene oxide acts as a conducting matrix, a binder and an active material, as well as a volume change buffer agent, which holds the MoO{sub 3} particles in place during the discharge cycles. The cyclic voltammograms of the 12.5 wt% PEO surfactant MoO{sub 3} nanobelt composite displayed better cyclic performance compared with pure MoO{sub 3} nanobelts. The specific capacity of the pure MoO{sub 3} nanobelts and 12.5 wt% PEO surfactant MoO{sub 3} nanobelts exhibit as 199 mAh g{sup −1} and 225 mAh g{sup −1}, respectively, after 9 cycles, suggesting that the stability of surfactant material is worthy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electrospun montmorillonite modified poly(vinylidene fluoride) nanocomposite separators for lithium-ion batteries

Highlights: • Composite separators of PVDF and MMT for lithium-ion batteries were electrospun. • Thermal dimensional stability and tensile property of composite separators get improved. • Presence of montmorillonite promotes electrical properties of PVDF fibrous separators. • Batteries consisting of PVDF/MMT-5% separator achieve the best performance. - Abstract: Composite separators of poly(vinylidene fluoride) (PVDF) with different contents of montmorillonite (MMT) for Li-ion batteries have been fabricated by electrospinning. The morphology, function group, crystallinity, and mechanical properties of membranes were investigated by scanning electron microscope (SEM), Fourier Transform infrared spectra (FT-IR), differential scanning calorimetry (DSC), and tensile test, respectively. Interlayer spacing of MMT in polymer was characterized by X-ray diffraction (XRD). In addition, the results of electrochemical measurements suggest that PVDF/MMT-5% composite membrane has maximum ionic conductivity of 4.2 mS cm{sup −1}, minimum interfacial resistance of 97 Ω, and excellent electrochemical stability. The cell comprising PVDF/MMT-5% composite membrane shows higher capacity and more stable cycle performance than the one using commercial Celgard PP membrane.

36 MATERIALS SCIENCE↗

Structural modification and photoluminescence studies of Eu in lamellar fluorphlogopite by the adjustment of layer charge

Highlights: • The structure of fluorphlogopite was modified by the decrease of layer charge. • Characteristic emission of Eu{sup 3+} was greatly enhanced as doped to the modified clay. • The emitting color changed from orange-red to red in respect to the original host. • This is a new strategy to enhance the luminescence of inorganic layered materials. - Abstract: In this paper, the lamellar fluorphlogopite was structurally modified by the adjustment of layer charge and the rare earth Eu{sup 3+} was doped to fluorphlogopite with a subsequent high temperature solid state reaction process. The structural modification involved a preliminary treatment of fluorphlogopite with HNO{sub 3} and oxalic acid to reduce the layer charge density, and part of the charge-reduced fluorphlogopite was converted to a homoionic Na form by ion exchange with NaCl or NaB(C{sub 6}H{sub 5}){sub 4}. It has been noticed that the interlayer spacing of modified fluorphlogopite is decreased as compared with the original fluorphlogopite due to the ionic radius difference between K{sup +} and Na{sup +}. The photoluminescence study suggests that adjustment of layer charge of fluorphlogopite is beneficial to enhance the luminescence intensity excited with near UV light, and the layered system may be a potential red light component for the use of solid-state lighting and other optoelectronic fields.

36 MATERIALS SCIENCE↗

Structural characterization of chitosan-smectite nanocomposite and its application in the development of a novel potentiometric monohydrogen phosphate-selective sensor

Highlights: • Protonated chitosan molecules intercalated into the smectite layers as monolayered arrangement. • A novel HPO{sub 4}{sup 2−} selective potentiometric electrode based on the chitosan-smectite nanocomposite was constructed. • Easy to prepare, low-cost, and highly selective potentiometric sensor. - Abstract: Chitosan-smectite biocomposite was prepared by intercalation of protonated chitosan molecules into the interlayer space of smectite in monolayer arrangement through cation exchange mechanism and the obtained biocomposite was successfully used as an electroactive component in the structure of a PVC membrane potentiometric sensor for the direct and highly selective determination of monohydrogen phosphate ions. The comparative elemental, structural, thermal and morphological analysis of starting-smectite, neat chitosan and chitosan-smectite were investigated by utilizing EDX, XRD, ATR-FTIR, TG/DTG/DTA, SEM and surface area measurement techniques. The optimum membrane composition, detection limit, response time, pH working range and repeatability of the proposed electrode were determined.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Magnetic transition and defect characteristics of multiferroic CuFe1-xGaxO2 studied by positron annihilation spectra

Highlights: • A systematic investigation of the effect of Ga doping on the structural and magnetic properties of CuFeO{sub 2}. • Crystal defects are determined by positron annihilation spectroscopy. • There is a good correlation between antiferromagnetic stability and lattice distortion. • Crystal defects and interlayer ions in polycrystalline samples influence the magnetic properties. - Abstract: The structure, crystal defects and magnetic properties of multiferroic CuFe{sub 1-x}Ga{sub x}O{sub 2} (CFGO; x = 0–0.07) ceramics are studied systemically. Substitution of Ga{sup 3+} for Fe{sup 3+} shrinks the CFO lattice, decreases the particle size, and causes small liquid phase formation. Positron annihilation spectroscopy demonstrates that all samples contain a considerable number of vacancy defects. The overall defect environment is virtually unaffected by Ga{sup 3+} doping, but the open-volume of the defects is redistributed. Magnetic susceptibility measurements show that Ga doping enhances the strength of the antiferromagnetic interaction between high-spin Fe{sup 3+} ions as a result of reduced magnetic correlation length, but decrease the stability of the antiferromagnetic phase. The antiferromagnetic transition temperature, T{sub N2}, decreases from 11 K for x = 0 to 8 K for x = 0.07, and this destabilization of the antiferromagnetic phase is closely related to the crystal structure and defects, which are discussed in detail in this work.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Open-air spray deposition of PCBM/BCP electron transport layer for inverted perovskite solar cells

A [6,6]-phenyl C61 butyric acid methyl ester (PCBM) and bathocuproine (BCP) electron transport layer (ETL) is spray deposited in open air directly on top of a perovskite at linear speeds of 9 m/min. The PCBM precursor ink contains a binary mixture of 1:1 chlorobenzene:chloroform, which optimizes spray wettability on the perovskite surface and allows quick solvent evaporation. A near-infrared heating module additionally provides a flash cure (<5 s) for the formation of smooth, large-area PCBM films (∼20 cm 2 ). A BCP solution in isopropanol is subsequently sprayed to form an ultrathin (<5 nm) film and characterized with a suite of high-resolution metrologies. The spray-deposition processing and near-infrared treatment do not damage the underlying perovskite. Inverted architecture devices containing the sprayed ETL achieve a champion efficiency of 20.3% and demonstrate stable performance without additional interlayers or surface treatments. Here, the technoeconomic cost of the open-air spray process is compared against traditional vacuum-based evaporation, resulting in a decrease in manufacturing costs by 26%.

14 SOLAR ENERGY↗

Tribology of two-dimensional materials: From mechanisms to modulating strategies

Two-dimensional (2D) materials are crystalline materials made of a single or a few layers of atoms. They have been an active research subject in recent years because of their unique physical and chemical properties. In particular, 2D materials such as graphene, hexagonal BN, and MoS 2 exhibit some of the lowest friction coefficients and wear rates, making them attractive for enhancing the efficiency, durability, and environmental compatibility of future mechanical systems. This review will focus on recent advances in the tribology of 2D materials. Starting from general physical characteristics, the essential friction and wear behavior of 2D materials together with the associated mechanisms are reviewed for both interlayer and surface sliding. Influences of the atomic structures of the slip interfaces and environmental factors are discussed, with special attention given to various strategies for achieving friction modulation and superlubricity. Finally, the emerging engineering applications of 2D materials, as well as future prospects, are summarized.

36 MATERIALS SCIENCE↗

Phase Formation and Texture of Nickel Silicides on Si1-xCx Epilayers

We investigated the phase formation and texture of nickel silicides formed during the reaction of 10 nm sputter deposited nickel with Si1-xCx epitaxial layers on Si(1 0 0) substrates, having a carbon content between 0 and 2.5 atomic percent. It was found that both the formation temperature as well as the texture of the metal-rich phases is influenced by the amount of carbon in the Si1-xCx layer. To determine the influence of the location of the carbon during the silicidation process we also investigated the reaction of 10 nm nickel on Si(1 0 0) substrates, where carbon was either alloyed in the nickel layer or deposited as an interlayer at the interface between the nickel and the substrate. Depending on the location of the carbon, a different thermal stability of the layer was found.

36 MATERIALS SCIENCE↗

Scalable synthesis of ultrathin MoS 2 membranes for dye desalination

Molybdenum disulfide (MoS 2 ) has been fabricated into thin-film composite (TFC) membranes for dye desalination due to its excellent underwater stability and tunable interlay spacing. However, it remains challenging to synthesize thin layers of MoS 2 with high water permeance and high dye rejection due to the difficulty in fabricating large crystalline sheets or exfoliation. Herein, we report a scalable method coupling bottom-up hydrothermal synthesis and top-down ultrasonic exfoliation to obtain well-dispersed MoS 2 nanosheets and a vacuum filtration method to prepare ultrathin membranes (thickness: 30 – 60 nm) for dye desalination. The MoS 2 nanosheets and membranes are thoroughly characterized for their chemistries and nanostructures. The membrane with 60-nm MoS 2 exhibits water permeance of 32 LMH/bar, Na 2 SO 4 rejection of 2.3%, and Direct Red-80 rejection of 99.0%. The MoS 2 membranes exhibit dye desalination performance superior to state-of-the-art commercial polyamide membranes and many leading membranes based on two-dimensional materials.

Dye desalination↗

Fabrication and operational considerations of hydrogen permeable Mo 2 C/V metal membranes and improvement with application of Pd

Mo 2 C has previously been demonstrated as an effective catalyst layer to enable stable H 2 permeation through vanadium foils at high temperatures. Here, in this paper, this approach was extended to several group V metal foils (V, Nb, and Ta) as well as mixed gas testing. The best permeability was achieved with V, and an activation process was developed to recover the performance of V foils displaying evidence of oxidation. Nb foils yielded ~20% the permeability of V, while Ta was too brittle to operate effectively. Mo 2 C/V membranes were operated at feed conditions well above the ductile-to-brittle transition pressure without embrittlement; however, the H 2 permeability of Mo 2 C/V membranes was significantly attenuated at lower temperatures (< 600 °C). H 2 permeation was also severely inhibited by the presence of N 2 or CO 2 in mixed gas environments due to strong competitive adsorption. The addition of a Pd catalyst layer on top of Mo 2 C improved mixed gas stability and increased H 2 permeability to 2 × 10 -8 mol·m -1 ·s -1 ·Pa -0.5 at 500 °C for V based membranes. Lastly, as an interlayer, Mo 2 C was demonstrated to be a stable barrier preventing Pd-V interdiffusion at 500 °C while simultaneously allowing significant H 2 permeation.

08 HYDROGEN↗

In situ oxidation of reduced graphene oxide membranes by peracetic acid for dye desalination

Graphene oxide (GO) membranes with tunable interlayer spacings are of interest for dye removal from salty textile wastewater, and the membranes are often reduced to improve their stability, which inevitably lowers water permeance. Herein, we demonstrate that reduced GO (rGO) membranes can be facilely modified using peracetic acid (PAA) in situ to dramatically enhance water permeance while retaining dye rejection. Specifically, PAA-modified membranes (PrGO) are synthesized by vacuum-filtering hydrazine-reduced rGO nanosheets onto Nylon substrate and then exposing them to PAA solutions. The effects of the rGO layer thickness, PAA content, and PAA exposure time on the membrane chemistry, nanostructures, and salt/dye separation properties are thoroughly examined. For example, the PAA oxidation of a 100 nm-thick rGO membrane for 10 min increases water permeance by 180 %, from 35 to 93 Liter m −2 h −1 bar −1 , and decreases Na 2 SO 4 rejection from 10 % to 3.3 % while retaining the rejection of Congo red at ≈99.7 %. The PrGO membranes exhibit stable water permeance and >99 % dye rejection in multi-cycle tests in a crossflow system, surpassing state-of-the-art GO membranes and showcasing their potential for practical applications.

Dye desalination↗