Search NASA⌕ Search

SEARCH · Search NASA

Results for “level set methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Relativistic MR–MP Energy Levels for L-shell Ions of Silicon

Level energies are reported for Si v, Si vi, Si vii, Si viii, Si ix, Si x, Si xi, and Si xii. The energies have been calculated with the relativistic Multi-Reference Møller–Plesset Perturbation Theory method and include valence and K-vacancy states with nl up to 5f. The accuracy of the calculated level energies is established by comparison with the recommended data listed in the National Institute of Standards and Technology (NIST) online database. The average deviation of valence level energies ranges from 0.20 eV in Si v to 0.04 eV in Si xii. For K-vacancy states, the available values recommended in the NIST database are limited to Si xii and Si xiii. The average energy deviation is below 0.3 eV for K-vacancy states. The extensive and accurate data set presented here greatly augments the amount of available reference level energies. Here, we expect our data to ease the line identification of L-shell ions of Si in celestial sources and laboratory-generated plasmas, and to serve as energy references in the absence of more accurate laboratory measurements.

74 ATOMIC AND MOLECULAR PHYSICS↗

Frequency threshold determination for frequency-responsive load controllers

Systems, methods, and computer media for managing frequency response in a power grid are provided herein. Individual grid-connected electrical devices can be turned on and/or off by corresponding frequency-responsive load controllers when frequency deviations beyond a threshold are detected. Each controller selects, for the corresponding electrical device, a frequency threshold from available frequencies in a frequency range. If the selected frequency falls within a deadband frequency range, then the controller sets the frequency threshold to a frequency outside of the deadband (e.g., to a closest available frequency outside of the deadband). On a system-wide level, this approximates a uniform distribution of frequency thresholds over the entire frequency range, including the deadband, and achieves the proper power-to-frequency relationship for grid stability. A supervisory coordinator can determine the frequency range from which a frequency threshold is selected based on aggregated power information for devices and controllers throughout the grid.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Autonomous 3D and Radiation Mapping in Tunnel Environments Using Aerial Robots - 18156

In this paper we present the algorithms and systems developed to enable autonomous 3D and radiation mapping, as well as radiological source localization in tunnel environments using aerial robots. The developed technologies aim to address the need of autonomous robotic inspection of nuclear sites such as facilities in the process of being decommissioned. As a motivational example, the PUREX tunnels at the Hanford Site are considered and the robot is designed to be able to conduct multi-modal 3D/radiation characterization of the tunnel environment without any prior knowledge or map provided beforehand. In order to enable the necessary GPS-denied simultaneous localization and mapping in dark, visually-degraded tunnel environments, a multi-modal mapping unit was developed which fuses the data from stereo vision cameras synchronized with flashing LEDs, inertial sensors, and three time-of-flight 3D depth sensors. The robot's pose and surrounding map are estimated at 20 Hz through a depth-enhanced visual- inertial localization and mapping framework. Provided this ability to estimate the robot's pose and develop a dense map in real-time, a receding horizon sampling-based autonomous exploration path planning algorithm was utilized and equips the robot with the ability to explore its environment given no prior map. The aforementioned key robotic functionalities are further extended through the integration of miniaturized fully solid-state scintillation detectors, utilizing advanced scintillators and Silicon Photomultipliers. The derived sensor data is employed for radiation mapping, which when fused with the 3D maps and the spectroscopic source localization methods, allow the aerial robotic platform to localize the radiation source and identify the specific source isotope. The source location is estimated through a geometric algorithm which can localize a source given only three measurements and short dwell times. The developed systems were tested using two small aerial robot platforms of the F450 and F550 frame classes with weights of 2.6 kg and 2.9 kg respectively. All localization and planning as well as high-level control algorithms are executed onboard. The scintillation detector is integrated on the robot and its data is collected through a dedicated microcontroller. A set of field experiments were conducted inside the dark and GPS-denied environment of a 4.25 m wide, 7.5 m tall, and 137 m long railroad tunnel. A Cs-137 source was placed within the tunnel, the associated 3D/radiation maps were derived, and the source location was estimated. Through these efforts, the goal is to develop the robotic technology that would enable the autonomous systematic inspection or emergency response in nuclear waste decommissioning facilities. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

REFERENCE CASES FOR USE IN THE CEMENTITIOUS BARRIERS PARTNERSHIP

The Cementitious Barriers Project (CBP) is a multidisciplinary cross cutting project initiated by the US Department of Energy (DOE) to develop a reasonable and credible set of tools to improve understanding and prediction of the structural, hydraulic and chemical performance of cementitious barriers used in nuclear applications. The period of performance is >100 years for operating facilities and > 1000 years for waste management. The CBP has defined a set of reference cases to provide the following functions: (1) a common set of system configurations to illustrate the methods and tools developed by the CBP, (2) a common basis for evaluating methodology for uncertainty characterization, (3) a common set of cases to develop a complete set of parameter and changes in parameters as a function of time and changing conditions, and (4) a basis for experiments and model validation, and (5) a basis for improving conceptual models and reducing model uncertainties. These reference cases include the following two reference disposal units and a reference storage unit: (1) a cementitious low activity waste form in a reinforced concrete disposal vault, (2) a concrete vault containing a steel high-level waste tank filled with grout (closed high-level waste tank), and (3) a spent nuclear fuel basin during operation. Each case provides a different set of desired performance characteristics and interfaces between materials and with the environment. Examples of concretes, grout fills and a cementitious waste form are identified for the relevant reference case configurations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Nucleon removal from unstable nuclei investigated via intranuclear cascade

An intranuclear cascade model for one-nucleon removal cross sections at intermediate energies beyond the sudden and inert-core assumptions is presented. Indirect processes are taken into account in the reaction mechanism via a Monte Carlo-based approach. The formalism is applied to a set of weakly bound nuclei for which data are available. Results are in correct agreement with experiment including the case of deeply bound nucleon removal. A comparison to eikonal predictions is performed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Machine learning bandgaps of double perovskites

The ability to make rapid and accurate predictions on bandgaps of double perovskites is of much practical interest for a range of applications. While quantum mechanical computations for high-fidelity bandgaps are enormously computation-time intensive and thus impractical in high throughput studies, informatics-based statistical learning approaches can be a promising alternative. Here we demonstrate a systematic feature-engineering approach and a robust learning framework for efficient and accurate predictions of electronic bandgaps of double perovskites. After evaluating a set of more than 1.2 million features, we identify lowest occupied Kohn-Sham levels and elemental electronegativities of the constituent atomic species as the most crucial and relevant predictors. As a result, the developed models are validated and tested using the best practices of data science and further analyzed to rationalize their prediction performance.

36 MATERIALS SCIENCE↗

Scalable, two–stage, autoinduction of recombinant protein expression in E. coli utilizing phosphate depletion

We report the scalable production of recombinant proteins in Escherichia coli, reliant on tightly controlled autoinduction, triggered by phosphate depletion in the stationary phase. The method, reliant on engineered strains and plasmids, enables improved protein expression across scales. Expression levels using this approach have reached as high as 55% of the total cellular protein. The initial use of the method in instrumented fed–batch fermentations enables cell densities of ~30 gCDW/L and protein titers up to 8.1 ± 0.7 g/L (~270 mg/gCDW). The process has also been adapted to an optimized autoinduction media, enabling routine batch production at culture volumes of 20 μl (384–well plates), 100 μl (96–well plates), 20 ml, and 100 ml. In batch cultures, cell densities routinely reach ~5–7 gCDW/L, offering protein titers above 2 g/L. Here, the methodology has been validated with a set of diverse heterologous proteins and is of general use for the facile optimization of routine protein expression from high throughput screens to fed–batch fermentation.

59 BASIC BIOLOGICAL SCIENCES↗

A knowledge brokerage approach for assessing the impacts of the setting up young farmers policy measure in Greece

This study explores Knowledge Brokerage (KB) aspects of an ex-post Impact Assessment (IA) for the Rural Development Programme (RDP) measure of setting up young farmers, under the Common Agricultural Policy (CAP), at the regional level in Northern Greece. The measure supports the entry of young farmers in agriculture by moving land from older to younger farmers. The aim of the study was to test a set of KB tools for improving the interaction between researchers and policy makers. Our analysis mainly focused on a suite of IA Support Modules to guide practitioners, and on a technical tool kit, a web-based contextualisation platform, to support the IA of the specific test case. Offering a structured approach towards IA, both the Support Modules and LIAISE-KIT allow framing the context, organisation, scheduling and method selection in the light of KB objectives. The evaluation of how IA Support Modules influence the Science Policy Interface (SPI), in the case of the ex-post assessment, demonstrated the high relevance of KB activities for facilitating the interaction between researchers and regional policy makers. The assessment bridges the gap between knowledge producers developing scientific output to be applied in a specific context, and knowledge users, who want clear messages regarding the policy challenges they face. Other conclusions include the need for specific guidelines and training for knowledge users, especially with regard to the use of tools. According to our findings, a consequent application of KB activities is a crucial pre-condition for successfully implementing IAs in future RDP measures.

54 ENVIRONMENTAL SCIENCES↗

Decentralised demand response market model based on reinforcement learning

A new decentralised demand response (DR) model relying on bi‐directional communications is developed in this study. In this model, each user is considered as an agent that submits its bids according to the consumption urgency and a set of parameters defined by a reinforcement learning algorithm called Q‐learning. The bids are sent to a local DR market, which is responsible for communicating all bids to the wholesale market and the system operator (SO), reporting to the customers after determining the local DR market clearing price. From local markets’ viewpoint, the goal is to maximise social welfare. Four DR levels are considered to evaluate the effect of different DR portions in the cost of the electricity purchase. The outcomes are compared with the ones achieved from a centralised approach (aggregation‐based model) as well as an uncontrolled method. Numerical studies prove that the proposed decentralised model remarkably drops the electricity cost compare to the uncontrolled method, being nearly as optimal as a centralised approach.

Shafie‐Khah, Miadreza↗

The photodissociation mechanisms of acrylonitrile: Ab initio calculations on reaction channels and surface intersections

The dissociations of CH{sub 2}CHCN into CH{sub 2}CH+CN and CH{sub 2}C+HCN in the S{sub 0}, T{sub 1}, and {sup 1}{pi}{sub 2}{pi}{sub C{identical_to}}{sub N}* (definitions of {pi} orbitals can refer to computational details) states, have been explored at the complete active space self-consistent field level of theory employing the Dunning correlation consistent triple-zeta basis set. The lowest energy points of the surface crossing seams have been searched. Two conical intersections, from {sup 1}{pi}{sub C{identical_to}}{sub N}{pi}{sub 1}* to {sup 1}{pi}{sub 2}{pi}{sub 1}* (CI{sub 1}) and from {sup 1}{pi}{sub 2}{pi}{sub 1}* to S{sub 0} (CI{sub 2}), and one intersystem crossing point (T{sub 1}/S{sub 0}) have been located. The energies of all critical points have been recomputed with the multiconfigurational second-order perturbation method. At each conical intersection, derivative coupling and unscaled gradient difference vectors have been analyzed to determine the relaxation channels that the molecule may evolve in after nonradiative decay. Once the molecule is photoexcited to the {sup 1}{pi}{sub 2}{pi}{sub 1}* or {sup 1}{pi}{sub C{identical_to}}{sub N}{pi}{sub 1}* state, it would relax along the similar pathway: funneling through CI{sub 1} and then CI{sub 2}, and finally populate the ground state. Our results show that upon 193 nm photoexcitation, the most probable reaction channel is the ground-state HCN elimination following radiationless decays from excited states through surface crossings, which consists with experimental results J. Chem. Phys. 108, 5784 (1998). The investigated dissociation channels on the {sup 1}{pi}{sub 2}{pi}{sub C{identical_to}}{sub N}* surface, which are inaccessible upon 193 nm photoexcitation, may provide information for reactions induced by higher energy excitations.

74 ATOMIC AND MOLECULAR PHYSICS↗

Electronic states of MgO: Spectroscopy, predissociation, and cold atomic Mg and O production

We used multiconfigurational methods and a large basis set to compute the potential energy curves of the valence and valence-Rydberg electronic states of MgO molecule. New bound electronic states are found. Using these highly correlated wave functions, we evaluated their mutual spin-orbit couplings and transition moment integrals. For the bound electronic states of MgO, we deduced an accurate set of spectroscopic constants that agree remarkably well with experimental results. Moreover, our potentials, transition moments, and spin-orbit coupling evolutions are incorporated into Fermi golden rule calculations to deduce the radiative lifetimes of MgO(B {sup 1}{Sigma}{sup +}) rovibrational levels and the natural lifetimes of MgO(A {sup 1}{Pi}) vibrational levels, where a good agreement is found with experimental values. Finally, we suggest new routes for the production of cold Mg and O atoms and cold MgO molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A hybrid approach for rapid, accurate, and direct kilovoltage radiation dose calculations in CT voxel space

Purpose: To develop and validate a fast and accurate method that uses computed tomography (CT) voxel data to estimate absorbed radiation dose at a point of interest (POI) or series of POIs from a kilovoltage (kV) imaging procedure. Methods: The authors developed an approach that computes absorbed radiation dose at a POI by numerically evaluating the linear Boltzmann transport equation (LBTE) using a combination of deterministic and Monte Carlo (MC) techniques. This hybrid approach accounts for material heterogeneity with a level of accuracy comparable to the general MC algorithms. Also, the dose at a POI is computed within seconds using the Intel Core i7 CPU 920 2.67 GHz quad core architecture, and the calculations are performed using CT voxel data, making it flexible and feasible for clinical applications. To validate the method, the authors constructed and acquired a CT scan of a heterogeneous block phantom consisting of a succession of slab densities: Tissue (1.29 cm), bone (2.42 cm), lung (4.84 cm), bone (1.37 cm), and tissue (4.84 cm). Using the hybrid transport method, the authors computed the absorbed doses at a set of points along the central axis and x direction of the phantom for an isotropic 125 kVp photon spectral point source located along the central axis 92.7 cm above the phantom surface. The accuracy of the results was compared to those computed with MCNP, which was cross-validated with EGSnrc, and served as the benchmark for validation. Results: The error in the depth dose ranged from -1.45% to +1.39% with a mean and standard deviation of -0.12% and 0.66%, respectively. The error in the x profile ranged from -1.3% to +0.9%, with standard deviations of -0.3% and 0.5%, respectively. The number of photons required to achieve these results was 1x10{sup 6}. Conclusions: The voxel-based hybrid method evaluates the LBTE rapidly and accurately to estimate the absorbed x-ray dose at any POI or series of POIs from a kV imaging procedure.

60 APPLIED LIFE SCIENCES↗

SU-F-18C-13: Low-Dose X-Ray CT Reconstruction Using a Hybrid First-Order Method

Purpose: To develop a novel reconstruction method for X-ray CT that can lead to accurate reconstruction at significantly reduced dose levels combining low X-ray incident intensity and few views of projection data. Methods: The noise nature of the projection data at low X-ray incident intensity was modeled and accounted by the weighted least-squares (WLS) criterion. The total variation (TV) penalty was used to mitigate artifacts caused by few views of data. The first order primal-dual (FOPD) algorithm was used to minimize TV in image domain, which avoided the difficulty of the non-smooth objective function. The TV penalized WLS reconstruction was achieved by alternated FOPD TV minimization and projection onto convex sets (POCS) for data fidelity constraints. The proposed FOPD-POCS method was evaluated using the FORBILD jaw phantom and the real cadaver head CT data. Results: The quantitative measures, root mean square error (RMSE) and contrast-to-noise ratio (CNR), demonstrate the superior denoising capability of WLS over LS-based TV iterative reconstruction. The improvement of RMSE (WLS vs. LS) is 15%∼21% and that of CNR is 17%∼72% when the incident counts per ray are ranged from 1×10{sup 5} to 1×10{sup 3}. In addition, the TV regularization can accurately reconstruct images from about 50 views of the jaw phantom. The FOPD-POCS reconstruction reveals more structural details and suffers fewer artifacts in both the phantom and real head images. The FOPD-POCS method also shows fast convergence at low X-ray incident intensity. Conclusion: The new hybrid FOPD-POCS method, based on TV penalized WLS, yields excellent image quality when the incident X-ray intensity is low and the projection views are limited. The reconstruction is computationally efficient since the FOPD minimization of TV is applied only in the image domain. The characteristics of FOPD-POCS can be exploited to significantly reduce radiation dose of X-ray CT without compromising accuracy for diagnosis or treatment planning.

60 APPLIED LIFE SCIENCES↗

The Michigan New Technology Training and Research (MNTR) Translational Program in Nuclear Medicine (Final Report)

The Michigan New Technology Training and Research (MNTR) Translational Program in Nuclear Medicine and Molecular Imaging This project established the Michigan New Technology Training and Research (MNTR) translational program, focused on the acceleration of new clinical molecular imaging methods. Molecular imaging approaches to imaging are a very flexible and powerful development, with many recent examples advancing the diagnosis and guiding the management of human disease. These methods depend on the design, synthesis and testing of new radiotracers (molecules designed to target specific cells or tissues in the body), labeled with short-lived radioactive atoms (positron emitters). The new radiotracers are imaged in the human body using positron emission tomography (PET) imaging. The University of Michigan PET Center has considerable experience in the discovery, development, refinement and initial human applications of new PET radiotracers. An emerging impediment to efficient availability of new PET radiotracers, however, involves the regulatory environment at multiple levels. Many potentially successful ideas are delayed or even prevented from entering human use by these barriers. In the current grant, we provided hands-on experience for the next generation of young scientists working in molecular imaging so that they are equipped to effectively move new ideas and radiotracers from the research laboratory to the nuclear medicine clinic (bench-to-bedside). For new radiotracer development, oversight by the Food and Drug Administration (FDA), the Nuclear Regulatory Commission (NRC), and local institutional committees and reviews are required. These aspects of translation from laboratory to clinic are often omitted from the formal training of new scientists, but were provided to three trainees via direct mentorship in the MNTR program. The MNTR training program built on the translational successes of the University of Michigan Division of Nuclear Medicine and capitalized on our strengths (facilities, faculty, a wide-ranging selection of projects, and the experience and commitment to bring new radiotracers into human studies) to systematically train three fellows in radiochemistry and nuclear medicine. Integrated training in development, validation and clinical translation of new PET radiotracers occurred through practical involvement in multiple research projects, each at a different stage along the pathway from bench-to-bedside. Each trainee obtained experience of the entire process over about 2 years. Projects involved development of new radiotracers for neurodegenerative disorders (e.g. Alzheimer disease), movement disorders (e.g. Parkinson disease, progressive supranuclear palsy) and neurodevelopmental syndromes (e.g. Tourette syndrome) as well as new radiochemistry methods for synthesizing radiotracers. Each project was pursued in a close collaboration between the fellow trainee and both the clinical and basic science faculty at the University of Michigan PET Center, and provided an unprecedented opportunity for the highest-level training in academic radiochemistry and nuclear medicine research. The project has resulted in 17 peer-reviewed publications to date, and at least 4 more are in preparation. Additionally, 1 book chapter and 26 conference presentations have resulted from this grant. Upon completion of the MNTR Program, the trainees have emerged as translational scientists wielding the necessary skill-set (practical research experience, multidisciplinary training, regulatory know-how) to embark on successful careers in translational molecular imaging, bringing continued advances in the field to bear on important human disorders. As a metric of the Program’s success, one fellow has already secured employment in the field, while the other two are finishing writing papers; they wish to also stay in the radiochemistry and nuclear medicine community, and are currently applying for jobs.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Improved parallel solution techniques for the integral transport matrix method

Alternative solution strategies to the parallel block Jacobi (PBJ) method for the solution of the global problem with the integral transport matrix method operators have been designed and tested. The most straightforward improvement to the Jacobi iterative method is the Gauss-Seidel alternative. The parallel red-black Gauss-Seidel (PGS) algorithm can improve on the number of iterations and reduce work per iteration by applying an alternating red-black color-set to the subdomains and assigning multiple sub-domains per processor. A parallel GMRES(m) method was implemented as an alternative to stationary iterations. Computational results show that the PGS method can improve on the PBJ method execution by up to {approx}50% when eight sub-domains per processor are used. However, compared to traditional source iterations with diffusion synthetic acceleration, it is still approximately an order of magnitude slower. The best-performing case are opticaUy thick because sub-domains decouple, yielding faster convergence. Further tests revealed that 64 sub-domains per processor was the best performing level of sub-domain division. An acceleration technique that improves the convergence rate would greatly improve the ITMM. The GMRES(m) method with a diagonal block preconditioner consumes approximately the same time as the PBJ solver but could be improved by an as yet undeveloped, more efficient preconditioner.

97 MATHEMATICS AND COMPUTING↗

BCL::SAXS: GPU accelerated Debye method for computation of small angle X-ray scattering profiles

Small angle X-ray scattering (SAXS) is an experimental technique used for structural characterization of macromolecules in solution. In this work, we present BCL::SAXS--an algorithm designed to replicate SAXS profiles from rigid protein models at different levels of detail. We first show our derivation of BCL::SAXS and compare our results with the experimental scattering profile of hen egg white lysozyme. Using this protein we show how to generate SAXS profiles representing: (1) complete models, (2) models with approximated side chain coordinates, and (3) models with approximated side chain and loop region coordinates. We evaluated the ability of SAXS profiles to identify a correct protein topology from a non-redundant benchmark set of proteins. We find that complete SAXS profiles can be used to identify the correct protein by receiver operating characteristic (ROC) analysis with an area under the curve (AUC)>99%. We demonstrate how our approximation of loop coordinates between secondary structure elements improves protein recognition by SAχS for protein models without loop regions and side chains. Agreement with SAXS data is a necessary but not sufficient condition for structure determination. We conclude that experimental SAXS data can be used as a filter to exclude protein models with large structural differences from the native.

59 BASIC BIOLOGICAL SCIENCES↗

Uncertainty propagation of p-boxes using sparse polynomial chaos expansions

In modern engineering, physical processes are modelled and analysed using advanced computer simulations, such as finite element models. Furthermore, concepts of reliability analysis and robust design are becoming popular, hence, making efficient quantification and propagation of uncertainties an important aspect. In this context, a typical workflow includes the characterization of the uncertainty in the input variables. In this paper, input variables are modelled by probability-boxes (p-boxes), accounting for both aleatory and epistemic uncertainty. The propagation of p-boxes leads to p-boxes of the output of the computational model. A two-level meta-modelling approach is proposed using non-intrusive sparse polynomial chaos expansions to surrogate the exact computational model and, hence, to facilitate the uncertainty quantification analysis. The capabilities of the proposed approach are illustrated through applications using a benchmark analytical function and two realistic engineering problem settings. They show that the proposed two-level approach allows for an accurate estimation of the statistics of the response quantity of interest using a small number of evaluations of the exact computational model. This is crucial in cases where the computational costs are dominated by the runs of high-fidelity computational models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗