Search NASA⌕ Search

SEARCH · Search NASA

Results for “multi frequency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

FoXS: a web server for rapid computation and fitting of SAXS profiles

Small angle X-ray scattering (SAXS) is an increasingly common technique for low-resolution structural characterization of molecules in solution. SAXS experiment determines the scattering intensity of a molecule as a function of spatial frequency, termed SAXS profile. SAXS profiles can contribute to many applications, such as comparing a conformation in solution with the corresponding X-ray structure, modeling a flexible or multi-modular protein, and assembling a macromolecular complex from its subunits. These applications require rapid computation of a SAXS profile from a molecular structure. FoXS (Fast X-Ray Scattering) is a rapid method for computing a SAXS profile of a given structure and for matching of the computed and experimental profiles. Here, we describe the interface and capabilities of the FoXS web server (http://salilab.org/foxs).

59 BASIC BIOLOGICAL SCIENCES↗

Impacts of PV Module Connector Failures on Cost and Performance of Utility Scale Photovoltaic Systems

The reliability, cost and performance of electrical connectors are a concern in all types of electrical systems, and demands on connectors used on photovoltaic (PV) systems include that connectors maintain electrical conductivity and physical strength, endure ultraviolet sunlight and high ambient temperature, and resist moisture and chemical intrusion over a very long (>25 year) performance period. Connector failures increase operation and maintenance (O&M) costs and reduce plant production, but connector failure can also cause safety and liability problems, which are of greater concern. This work results from a three-year collaboration between Sandia National Laboratories (SNL), the Electric Power Research Institute (EPRI), and the National Renewable Energy Laboratory (NREL) and funded by the U.S. Department of Energy (DOE) Solar Energy Technology Office (SETO) under Agreements #39035 and #38531 "Connector Reliability Across the US Solar Sector." a multi-pronged investigation of PV connector health across the US (see https://energy.sandia.gov/pvconnectors/). This report presents derivation of a Techno-Economic Analysis (TEA) that models failure modes and frequencies (how often failure occurs), estimates O&M costs and lost production associated with connector failures, and then calculates the effect that PV module connectors can have on Levelized Cost of Energy (LCOE). The model is informed with initial data from quantitative assessment of failure rates, root causes and mechanisms, in-situ diagnostics and data collection, lab-based forensics, and interviews with PV connector manufacturers and plant operators. SNL conducted site inspections at multiple utility-scale sites in different climates and subjected field samples of new, used, and degraded connectors to visual and electrical characterization. EPRI conducted metallurgical analysis of the pin and sleeve conductors to study failure-induced morphological and compositional changes. There is in general a shortage of statistically valid data, but data from PVROM database maintained by SNL was sufficient to ascertain failure rates and lost production as well as provide qualitative insight in its curated maintenance records. This report details the structure of the mathematical model but the sources of data to inform the model will continue to evolve. Analysis of a 100 MW PV plant is provided as an example of the use of the model, with results indicating that connectors are responsible for Annualized O&M Costs of $\$$71,933/year; Annualized Unit O&M Costs of $\$$0.72/kW/year; that a Reserve Account of $\$$187,220 should be available to fund repairs related to connectors; that connectors add $\$$1,494,004 to the Net Present Value of the O&M Costs (project life); and that O&M related to connectors adds about $\$$0.00088/kWh to the Levelized Cost of Energy. The impact of this model is to provide a tool to make the US solar sector more robust by quantifying and monetizing the reliability risks to utility-scale PV systems posed by poorly installed, mismatched and/or poorly designed and manufactured connectors. The TEA provides a model incorporating failure statistics, O&M cost data, and lost production into a single figure of merit, informing decisions and enabling practitioners to optimize cost and performance trade-offs. Stakeholders include connector manufacturers, system designers and equipment specifiers, standards bodies, installers and O&M providers, investors and insurance underwriters. This report supports continued growth of PV predicated on assurances that properly installed and maintained PV system connectors are safe and reliable. The project team is proposing future work including accelerated testing of connectors and expanding the approach taken here to other PV system components, such as TEA for rapid shut-down devices.

14 SOLAR ENERGY↗

A COMPREHENSIVE STATISTICAL DESCRIPTION OF RADIO-THROUGH- γ -RAY SPECTRAL ENERGY DISTRIBUTIONS OF ALL KNOWN BLAZARS

We combined multi-wavelength data for blazars from the Roma-BZCAT catalog and analyzed hundreds of X-ray spectra. We present the fluxes and spectral energy distributions (SEDs), in 12 frequency bands from radio to γ -rays, for a final sample of 2214 blazars. Using a model-independent statistical approach, we looked for systematic trends in the SEDs; the most significant trends involved the radio luminosities and X-ray spectral indices of the blazars. We used a principal component analysis (PCA) to determine the basis vectors of the blazar SEDs and, in order to maximize the size of the sample, imputed missing fluxes using the K -nearest neighbors method. Using more than an order of magnitude more data than was available when Fossati et al. first reported trends of SED shape with blazar luminosity, we confirmed the anti-correlation between radio luminosity and synchrotron peak frequency, although with greater scatter than was seen in the smaller sample. The same trend can be seen between bolometric luminosity and synchrotron peak frequency. Finally, we used all of the available blazar data to determine an empirical SED description that depends only on the radio luminosity at 1.4 GHz and the redshift. We verified that this statistically significant relation was not a result of the luminosity–luminosity correlations that are natural in flux-limited samples (i.e., where the correlation is actually caused by the redshift rather than the luminosity).

79 ASTRONOMY AND ASTROPHYSICS↗

Importance of Cross-redistribution in Scattering Polarization of Spectral Lines: The Cases of {sup 3}P−{sup 3}S Triplets of Mg i and Ca i

Scattering on a multi-level atomic system has dominant contributions from resonance and Raman scattering. While initial and final levels are the same for resonance scattering, they are different for Raman scattering. The frequency redistribution for resonance scattering is described by the usual partial frequency redistribution functions of Hummer, while that for Raman scattering is described by cross-redistribution (XRD) function. In the present paper, we investigate the importance of XRD on linear polarization profiles of {sup 3}P−{sup 3}S triplets of Mg i and Ca i formed in an isothermal one-dimensional atmosphere. We show that XRD produces significant effects on the linear polarization profiles when the wavelength separations between the line components of the multiplet are small, like in the cases of Mg i b and Ca i triplets.

79 ASTRONOMY AND ASTROPHYSICS↗

A sequential approach to multivariable stability robustness analysis

In sequential loop closure, the importance of evaluating the stability and stability robustness at the intermediate loop closures is well known, yet how the stability and stability robustness evaluated at the intermediate steps contribute to the stability and stability robustness of the overall feedback system must be developed. An analysis of the complete feedback system reveals the multivariable Nyquist contributions from the intermediate loop closures. It is also shown that the results greatly simplify if frequency separation exists between the intermediate loops. The analysis is presented with a two-step loop closure procedure using 'inner' and 'outer' loops which can be generalized to multi-step situations. The control of the longitudinal dynamics of an aircraft is addressed to further clarify and demonstrate the results.

Newman, Brett↗

New Generation Lidar Technology and Applications

Lidar has been a tool for atmospheric research for several decades. Until recently routine operational use of lidar was not known. Problems have involved a lack of appropriate technology rather than a lack of applications. Within the last few years, lidar based on a new generation of solid state lasers and detectors have changed the situation. Operational applications for cloud and aerosol research applications are now well established. In these research applications, the direct height profiling capability of lidar is typically an adjunct to other types of sensing, both passive and active. Compact eye safe lidar with the sensitivity for ground based monitoring of all significant cloud and aerosol structure and the reliability to operate full time for several years is now in routine use. The approach is known as micro pulse lidar (MPL). For MPL the laser pulse repetition rate is in the kilohertz range and the pulse energies are in the micro-Joule range. The low pulse energy permits the systems to be eye safe and reliable with solid state lasers. A number of MPL systems have been deployed since 1992 at atmospheric research sites at a variety of global locations. Accurate monitoring of cloud and aerosol vertical distribution is a critical measurement for atmospheric radiation. An airborne application of lidar cloud and aerosol profiling is retrievals of parameters from combined lidar and passive sensing involving visible, infrared and microwave frequencies. A lidar based on a large pulse, solid state diode pumped ND:YAG laser has been deployed on the NASA ER-2 high altitude research aircraft along with multi-spectral visible/IR and microwave imaging radiometers since 1993. The system has shown high reliability in an extensive series of experimental projects for cloud remote sensing. The retrieval of cirrus radiation parameters is an effective application for combined lidar and passive sensing. An approved NASA mission will soon begin long term lidar observation of atmospheric structure from space. The Geoscience Laser Altimeter System (GLAS) of the Earth Observing System is scheduled for deployment in the 2001 time frame. GLAS is both a cloud and aerosol lidar and a surface altimeter, principally for monitoring of polar ice sheets. The GLAS instrument is based on all solid state lasers operating at 40 Hz and high efficiency, solid state detectors. The design lifetime is three to five years. Data from the GLAS mission is expected to revolutionize some aspects of our understanding of the global distribution of cloud and aerosols for global climate prediction.

Spinhirne, James D.↗

Performance of the Wavelet Decomposition on Massively Parallel Architectures

Traditionally, Fourier Transforms have been utilized for performing signal analysis and representation. But although it is straightforward to reconstruct a signal from its Fourier transform, no local description of the signal is included in its Fourier representation. To alleviate this problem, Windowed Fourier transforms and then wavelet transforms have been introduced, and it has been proven that wavelets give a better localization than traditional Fourier transforms, as well as a better division of the time- or space-frequency plane than Windowed Fourier transforms. Because of these properties and after the development of several fast algorithms for computing the wavelet representation of any signal, in particular the Multi-Resolution Analysis (MRA) developed by Mallat, wavelet transforms have increasingly been applied to signal analysis problems, especially real-life problems, in which speed is critical. In this paper we present and compare efficient wavelet decomposition algorithms on different parallel architectures. We report and analyze experimental measurements, using NASA remotely sensed images. Results show that our algorithms achieve significant performance gains on current high performance parallel systems, and meet scientific applications and multimedia requirements. The extensive performance measurements collected over a number of high-performance computer systems have revealed important architectural characteristics of these systems, in relation to the processing demands of the wavelet decomposition of digital images.

El-Ghazawi, Tarek A.↗

Generation of Land Surface Reflectance with Combined Geo-KOMPSAT-2A AMI and Himawari 8 AHI Observations

The latest generation of geostationary satellites has opened a new era of Earth observations with unprecedented spatiotemporal resolution and spectral range. Together with GOES 16/17 ABI, FY4-A AGRI, and Himawari-8 AHI, a new Korean geostationary satellite (Geo-KOMPSAT-2A AMI) has operationally collected a full-disk image in 16 channels every ten minutes since July 2019, allowing diurnal land surface monitoring over a large proportion of Asia and all of Oceania. Retrieving accurate surface reflectance (SR) over land from GK-2A/AMI is a challenging but high priority objective. One of the challenges is the absence of a spectral band in the 2.2 m SWIR range from AMI, which is required by many atmospheric correction algorithms to retrieve atmospheric aerosol properties. To remedy this issue, we adopt a strategy that combines concurrent GK-2A/AMI and Himawari 8/AHI observations in order to derive AMI SR. We have adapted the NASA Multi-Angle Implementation of Atmospheric Correction (MAIAC) algorithm to process the data stream from Himawari 8/AHI. The advantages of the MAIAC algorithm is its capability to exploit the high temporal frequency and varying illumination geometry of the geostationary data for advanced cloud/snow detection, aerosol retrieval, and characterization of surface bidirectional reflectance properties. Leveraging the similarities of spectral bands and the sun-target-sensor geometry between AMI and AHI, we are able to create denser time series of observations and enhanced BRDF samples over most of the spatial coverage of AMI (and AHI). The combined stereo-type observations not only help derive SR for AMI but also enhance retrievals of the corresponding AHI surface products. We evaluate the resulting AMI SR using ground (AERONET) observations and corresponding MODIS products. Further, we discuss potential challenges in utilizing the geostationary satellite data for land surface monitoring.

geostationary satellite↗

Design of axion and axion dark matter searches based on ultra high Q SRF cavities

The Superconducting Quantum Materials and Systems center is developing searches for dark photons, axions and ALPs with the goal of improving upon the current state-of-the-art sensitivity. These efforts leverage on Fermi National Accelerator expertise on ultra-high quality factor superconducting radio frequency cavities combined with the center research on quantum technology. Here we focus on multiple axion searches that utilize ~1E10 quality factor superconducting radio frequency cavities and their resonant modes to enhance the production and/or detection of axions in the cavity volume. In addition, we present preliminary results of single-mode and multi-mode nonlinearity measurements that were carried out as part of an experimental feasibility study to gain insight on the behavior of the ultra-high quality factor resonators and the experimental RF system in the regime relevant for axion searches.

43 PARTICLE ACCELERATORS↗

Impact of Traffic-Following on Order of Autonomous Airspace Operations

We investigate the dynamic emergence of traffic order in a distributed multi-agent system, aiming to minimize inefficiencies that stem from unnecessary structural impositions. We introduce a methodology for developing a dynamically updating traffic pattern map of the airspace by leveraging information about the consistency and frequency of flow directions used by current as well as preceding traffic. Informed by this map, an agent can discern the degree to which it is advantageous to follow traffic by trading off utilities such as time and order. We show that for the traffic levels studied, for low degrees of traffic-following behavior, there is minimal penalty in terms of aircraft travel times while improving the overall orderliness of the airspace. On the other hand, heightened traffic-following behavior may result in increased aircraft travel times, while marginally reducing the overall entropy of the airspace. Ultimately, the methods and metrics presented in this paper can be used to optimally and dynamically adjust an agent’s traffic-following behavior based on these trade-offs.

Airspace Operations↗

Impact of Traffic-Following on Order of Autonomous Airspace Operations

In this paper, we investigate the dynamic emergence of traffic order in a distributed multi-agent system, aiming to minimize inefficiencies that stem from unnecessary structural impositions. We introduce a methodology for developing a dynamically updating traffic pattern map of the airspace by leveraging information about the consistency and frequency of flow directions used by current as well as preceding traffic. Informed by this map, an agent can discern the degree to which it is advantageous to follow traffic by trading off utilities such as time and order. We show that for the traffic levels studied, for low degrees of traffic-following behavior, there is minimal penalty in terms of aircraft travel times while improving the overall orderliness of the airspace. On the other hand, heightened traffic-following behavior may result in increased aircraft travel times, while marginally reducing the overall entropy of the airspace. Ultimately, the methods and metrics presented in this paper can be used to optimally and dynamically adjust an agent’s traffic-following behavior based on these trade-offs.

Airspace Operations↗

Pressurized Gas Beam Monitor for Extremely High Intensities – Phase II

A novel pressurized gas-filled multi-RF-cavity beam profile monitor has been studied that is simple and robust in high-radiation environments. Charged particles passing through each RF-cavity in the monitor produce intensity-dependent ionized plasma, which changes the gas permittivity. Standard RF techniques to measure the change in quality factor (Q) and frequency (f) as a function of time are then used to determine the change in permittivity and corresponding beam intensity in each cavity in the profile monitor. The sensitivity to beam intensity is adjustable using gas pressure and RF gradient. The performance of the gas-filled beam profile monitor has been numerically simulated to evaluate the sensitivity of permittivity measurements and the effectiveness of calibration strategies. An entire multi-RF-cavity system has been designed and a demonstration test has been prepared.

43 PARTICLE ACCELERATORS↗

Performance modeling of microsecond scale biological molecular dynamics simulations on heterogeneous architectures

Performance improvements in biomolecular simulations based on molecular dynamics (MD) codes are widely desired. Unfortunately, the factors, which allowed past performance improvements, particularly the microprocessor clock frequencies, are no longer increasing. Hence, novel software and hardware solutions are being explored for accelerating performance of widely used MD codes. In this paper, we describe our efforts on porting, optimizing and tuning of Large-scale Atomic/Molecular Massively Parallel Simulator, a popular MD framework, on heterogeneous architectures: multi-core processors with graphical processing unit (GPU) accelerators. Our implementation is based on accelerating the most computationally expensive non-bonded interaction terms on the GPUs and overlapping the computation on the CPU and GPUs. This functionality is built on top of message passing interface that allows multi-level parallelism to be extracted even at the workstation level with the multi-core CPUs and allows extension of the implementation on GPU-enabled clusters. We hypothesize that the optimal benefit of heterogeneous architectures for applications will come by utilizing all possible resources (for example, CPU-cores and GPU devices on GPU-enabled clusters). Benchmarks for a range of biomolecular system sizes are provided, and an analysis is performed on four generations of NVIDIA's GPU devices. On GPU-enabled Linux clusters, by overlapping and pipelining computation and communication, we observe up to 10-folds application acceleration in multi-core and multi-GPU environments illustrating significant performance improvements. Detailed analysis of the implementation is presented that allows identification of bottlenecks in algorithm, indicating that code optimization and improvements on GPUs could allow microsecond scale simulation throughput on workstations and inexpensive GPU clusters, putting widely desired biologically relevant simulation time-scales within reach of a large user community. In order to systematically optimize simulation throughput and to enable performance prediction, we have developed a parameterized performance model that will allow developers and users to explore the performance potential of future heterogeneous systems for biological simulations.

Agarwal, Pratul K.↗

Studying X-Ray Binaries with High Energy Frequency Quasi-Periodic Oscillations

The goal of this investigation is to further our understanding of the dynamics of secreting neutron stars and black holes in the hope of using these systems as probes of the physics of strong gravitational fetus. The main focus of this work has been a multi-year program of simultaneous millisecond X-ray timing and spectral observations carried out with the Rossi X-Ray Timing Explorer (RXTE) to perform the X-ray timing and one of the satellites Asca, BeppoSAX, or Chandra to perform X-ray spectral measurements. With the advent of Chandra, we have extended our work to incLude extragalactic X-ray binaries. We conducted a comprehensive study of the X-ray and radio behavior of the Black Hole Candidate (BHC) X-ray transient XTE J1550-564 using RXTE, Chandra, and the Australian Telescope Compact Array (ATCA). We showed that strong radio emission is associated with major X-ray outbursts involving an X-ray state transition, while a compact radio jet is seen in the low/hard X-ray state found in the outburst decay. Interesting, the total energy required to produce the compact jet may be a substantial fraction of the total accretion energy of the system in that state. We also performed a detailed study of the spectral and timing properties of the decay. In joint RXTE/BeppoSAX observations of the neutron-star X-ray binary Cyg X-2, we discovered a correlation between the timing properties (the frequency of the horizontal branch oscillations) and the properties of a soft, thermal component of the X-ray spectrum. d e showed that more det<iiled measurements of this source may lead to constraints on models of the accretion flow and the emission of X- ray from accreting neutron stars. We have completed analysis of RXTE observations of the X-ray transient SAX J1750.8-2900 made after detection of X-ray bursts from the source with the BeppoSAX Wide-Field Camera. We discovered millisecond oscillations in both the persistent emission and in the X-ray bursts.

Kaaret, P.↗

Multi-period G-mode pulsations of a pre-He-WD star in the eclipsing binary KIC 9164561

We report the discovery of a new pulsating pre-He-WD in the EL CVn-type binary KIC 9164561. Light curve modeling and frequency analysis of the binary system were carried out based on short-cadence Kepler photometry. Combined with the radial-velocity solution, revised physical parameters of the binary system were determined. The component KIC 9164561B was confirmed to be a pre-He-WD star with M = 0.213±0.012M{sub ⊙}, R = 0.283±0.006R{sub ⊙}, and T{sub eff} = 10650±200 K. In addition to the light changes due to an eclipse, pulsational light variations of the pre-He-WD star were detected. The Fourier analysis reveals at least 52 frequencies, with the dominant one at 313.4 μHz. A brief mode identification indicates that the pre-He-WD star pulsates in g-modes with an average period spacing of ΔΠ{sub l=1} = 80.87 s. Moreover, a number of multiplets due to rotational splitting were identified from the frequency spectra. The rotational period of the pulsating pre-He-WD star was found to equal to the orbital period, indicating that KIC 9164561B is in synchronous rotation.

79 ASTRONOMY AND ASTROPHYSICS↗

A Drive Laser for Multi-Bunch Photoinjector Operation

Numerous electron beam applications would benefit from increased average current without sacrificing beam brightness. Work is underway at LLNL to investigate the performance of X-band photoinjectors that would generate electron bunches at a rate matching the RF drive frequency, i.e. one bunch per RF cycle. A critical part of this effort involves development of photo-cathode drive laser technology. Here we present a new laser architecture that can generate pulse trains at repetition rates up to several GHz. This compact, fiber-based system is driven directly by the accelerator RF and so is inherently synchronized with the accelerating fields, and scales readily over a wide range of drive frequencies (L-band through X-band). The system will be required to produce 0.5 {mu}J, {approx}200 fs rise time, spatially and temporally shaped UV pulses designed to optimize the electron beam brightness. Presented is the current status of this system, producing 2 ps pulses from a continuous-wave source.

42 ENGINEERING↗

Non-propagating structures and propagating waves in solar wind turbulence revealed by simulations and observations

Structures and waves are common features of solar wind turbulence at various scales. The interplay between structures and waves is important for processes such as the turbulent energy cascade, plasma heating, and particle scattering. Our understanding of turbulence has been advanced by not only new space missions and numerical simulations, but also techniques that have been developed to interpret the rapidly growing turbulence data. We review basic models of turbulence with a specific focus on the analysis methods for understanding magnetic structures and waves. MHD and kinetic waves in single-spacecraft time series measurements can be identified through mode decomposition or their characteristic polarization signatures. The structures in this paper are considered as zero-frequency, non-propagating or convected modes embedded in the solar wind. The synergy between observations and simulations is most evident in the application of spatial-temporal analysis to multi-spacecraft observation and turbulence simulations. The spatial-temporal analysis has greatly improved our understanding of structures and waves in turbulence. We conclude by discussing prospects for future research.

79 ASTRONOMY AND ASTROPHYSICS↗

Astrophysical gyrokinetics: turbulence in pressure-anisotropic plasmas at ion scales and beyond

Here, we present a theoretical framework for describing electromagnetic kinetic turbulence in a multi-species, magnetized, pressure-anisotropic plasma. The turbulent fluctuations are assumed to be small compared to the mean field, to be spatially anisotropic with respect to it and to have frequencies small compared to the ion cyclotron frequency. At scales above the ion-Larmor radius, the theory reduces to the pressure-anisotropic generalization of kinetic reduced magnetohydrodynamics (KRMHD) formulated. At scales at and below the ion-Larmor radius, three main objectives are achieved. First, we analyse the linear response of the pressure-anisotropic gyrokinetic system, and show it to be a generalization of previously explored limits. The effects of pressure anisotropy on the stability and collisionless damping of Alfvénic and compressive fluctuations are highlighted, with attention paid to the spectral location and width of the frequency jump that occurs as Alfvén waves transition into kinetic Alfvén waves. Secondly, we derive and discuss a very general gyrokinetic free-energy conservation law, which captures both the KRMHD free-energy conservation at long wavelengths and dual cascades of kinetic Alfvén waves and ion entropy at sub-ion-Larmor scales. We show that non-Maxwellian features in the distribution function change the amount of phase mixing and the efficiency of magnetic stresses, and thus influence the partitioning of free energy amongst the cascade channels. Thirdly, a simple model is used to show that pressure anisotropy, even within the bounds imposed on it by firehose and mirror instabilities, can cause order-of-magnitude variations in the ion-to-electron heating ratio due to the dissipation of Alfvénic turbulence. Our theory provides a foundation for determining how pressure anisotropy affects turbulent fluctuation spectra, the differential heating of particle species and the ratio of parallel and perpendicular phase mixing in space and astrophysical plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗