Search NASA⌕ Search

SEARCH · Search NASA

Results for “process simulation modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Enhancing charge ratio sensitivity to hadronization effects via jet selections on resolved SoftDrop splitting

The study of quantum chromodynamics (QCD) at ultrarelativistic energies can be performed in a controlled environment through lepton-hadron deep inelastic scatterings. In such collisions, the high-energy partonic emissions that follow from the ejected hard partons are accurately described by perturbative QCD. However, the lower energy scales at which quarks and gluons experience color confinement, i.e., hadronization mechanism, fall outside the validity regions for perturbative calculations, requiring phenomenological models tuned to data to describe it. As such, hadronization physics cannot be currently derived from first principles alone. Monte Carlo event generators are useful tools to describe these processes as they simulate both the perturbative and the nonperturbative interactions, with model-dependent energy scales that control parton dynamics. This work employs jets—experimental reconstructions of final-state particles likely to have a common partonic origin—to inspect this transition further. Although originally proposed to circumvent hadronization effects, we show that jets can be utilized as probes of nonperturbative phenomena via their substructure. The charge correlation ratio was recently shown to be sensitive to hadronization effects. Our work further improves this sensitivity to nonperturbative scales by introducing a new selection based on the relative placement of the within the clustering tree, defined as the unclustering that resolves the jet’s leading charged particles. Published by the American Physical Society 2025

Apolinário, Liliana (ORCID:0000000335009681)↗

Enhancing 2D hydrodynamic flood models through machine learning and urban drainage integration

Two-dimensional hydrodynamic flood models are commonly employed for simulating flood extent and inundation depth. However, the influence of urban drainage network (UDN) is frequently overlooked in these models, potentially compromising their accuracy. Furthermore, the expensive computational costs and longer processing times make them challenging for large-scale hydrodynamic simulation. To address these challenges, this paper develops a machine learning (ML)-driven emulator for an open-source flood model, the Two-dimensional Runoff Inundation Toolkit for Operational Needs (TRITON). A TRITON-ML Emulator (TR-Emulator) that utilizes Convolutional Long Short-Term Memory is developed to capture the spatiotemporal features of flood events based on the outputs from TRITON. We further enhance the emulator by integrating UDN parameters (TR-UDN), such as the flow capacity of drainage pipes, pipe size, and pipe length, via an ML stacking technique to improve the water surface elevation (WSE) simulation. Hurricane Harvey 2017 in Houston, TX is used as the case study. We compare WSE results from TRITON, TR-Emulator, TR-UDN, and the United States Geological Survey (USGS) observations to evaluate the performance of these models. The results indicate that the TR-Emulator effectively replicates the WSE simulated by TRITON. Additionally, TR-UDN performs well in capturing WSE patterns and peak flows, aligning more closely with USGS observations, except in areas with milder slopes where conveyance discrepancies are observed. We further test the generalizability of our ML-based models using another smaller event. This paper shows that the TR-Emulator is effective for users and engineers to emulate a 2D hydrodynamic model, and the enhanced version of the TR-Emulator, TR-UDN, can be an efficient tool for predicting WSEs during urban flooding.

54 ENVIRONMENTAL SCIENCES↗

A Hybrid Reduced-Order Model of Fine-Resolution Hydrologic Simulations at a Polygonal Tundra Site

High-resolution predictions of land surface hydrological dynamics are desirable for improved investigations of regional- and watershed-scale processes. Direct deterministic simulations of fine-resolution land surface variables present many challenges, including high computational cost. We therefore propose the use of reduced-order modeling techniques to facilitate emulation of fine-resolution simulations. We use an emulator, Gaussian process regression, to approximate fine-resolution four-dimensional soil moisture fields predicted using a three-dimensional surface-subsurface hydrological simulator (PFLOTRAN). A dimension-reduction technique known as “proper orthogonal decomposition” is further used to improve the efficiency of the resulting reduced-order model (ROM). The ROM reduces simulation computational demand to negligible levels compared to the underlying fine-resolution model. In addition, the ROM that we constructed is equipped with an uncertainty estimate, allowing modelers to construct a ROM consistent with uncertainty in the measured data. The ROM is also capable of constructing statistically equivalent analogs that can be used in uncertainty and sensitivity analyses. We apply the technique to four polygonal tundra sites near Barrow, Alaska that are part of the Department of Energy’s Next-Generation Ecosystem Experiments (NGEE)-Arctic project. The ROM is trained for each site using simulated soil moisture from 1998-2000 and validated using the simulated data for 2002 and 2006. The average relative RMSEs of the ROMs are under 1%.

58 GEOSCIENCES↗

Time delay and noise explaining the behaviour of the cell growth in fermentation process

This paper proposes to investigate the interplay between time delay and external noise in explaining the behaviour of the microbial growth in batch fermentation process. Time delay and noise are modelled jointly via stochastic delay differential equations (SDDEs). The typical behaviour of cell concentration in batch fermentation process under this model is investigated. Milstein scheme is applied for solving this model numerically. Simulation results illustrate the effects of time delay and external noise in explaining the lag and stationary phases, respectively for the cell growth of fermentation process.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Efficient Reinforcement Learning for Real-Time Hardware-Based Energy System Experiments: Preprint

In the context of urgent climate challenges and the pressing need for rapid technology development, Reinforcement Learning (RL) stands as a compelling data-driven method for controlling real-world physical systems. However, RL implementation often entails time-consuming and computationally intensive data collection and training processes, rendering them inefficient for real-time applications that lack non-real-time models. To address these limitations, real-time emulation techniques have emerged as valuable tools for the lab-scale rapid prototyping of intricate energy systems. While emulated systems offer a bridge between simulation and reality, they too face constraints, hindering comprehensive characterization, testing, and development. In this research, we construct a surrogate model using limited data from simulated systems, enabling an efficient and effective training process for a Double Deep Q-Network (DDQN) agent for future deployment. Our approach is illustrated through a hydropower application, demonstrating the practical impact of our approach on climate-related technology development.

deep Q-learning↗

Model Structure and Climate Data Uncertainty in Historical Simulations of the Terrestrial Carbon Cycle (1850–2014)

Abstract The divergence among Earth system models in the terrestrial carbon cycle has prompted interest in how to reduce uncertainty. Previous studies have identified model structural uncertainty arising from process parameterizations and parameter values. The current study highlights the importance of climate forcing in generating carbon cycle uncertainty. We use simulations in which three models (Community Land Model version 4 (CLM4), CLM4.5, CLM5) with substantially different carbon cycles are forced with two climate reconstructions (CRUNCEPv7, Global Soil Wetness Project 3 version 1 (GSWP3v1)) to examine the contributions of model structure and climate to uncertainty in the carbon cycle over the period 1850–2014. Climate uncertainty for global annual net biome production exceeds one third of total uncertainty (defined as the sum of climate and model structure uncertainty) in the first half of the twentieth century, but declines after the 1950s. Global annual gross primary productivity, net primary productivity, heterotrophic respiration, and vegetation and soil carbon stocks have substantial climate uncertainty (relative to total uncertainty) throughout the simulation period. Climate forcing contributes more than one half of total uncertainty for these carbon cycle fluxes and stocks throughout boreal North America and Eurasia, some midlatitude regions, and in eastern Amazonia and western equatorial Africa during the decade 2000–2009. Comparison with observationally based data sets of the carbon cycle using model benchmarking methods provides insight into strengths and deficiencies among models and climate forcings, but we caution against overreliance on benchmarking to discriminate among models. The conceptualization of uncertainty arising from this study implies embracing multiple feasible model simulations rather than focusing on which model or simulation is best.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Beta decay rates of neutron-rich nuclei

Heavy element nucleosynthesis models involve various properties of thousands of nuclei in order to simulate the intricate details of the process. By necessity, as most of these nuclei cannot be studied in a controlled environment, these models must rely on the nuclear structure models for input. Of all the properties, the beta-decay half-lives are one of the most important ones due to their direct impact on the resulting abundance distributions. In this study we present the results of a large-scale calculation based on the relativistic nuclear energy density functional, where both the allowed and the first-forbidden transitions are studied in more than 5000 neutron-rich nuclei. Aside from the astrophysical applications, the results of this calculation can also be employed in the modeling of the electron and antineutrino spectra from nuclear reactors.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

State-variable model of porous electrode batteries 1-D electrochemical/thermal behavior

Compared to full-order numerical models, the state-variable model (SVM) achieves multiple orders of reduction in computation time for simulation of electrochemical/thermal transport and reaction processes occurring inside lithium-ion and similar batteries with porous electrode construction. The model efficiently describes Li diffusion dynamics in active material and electrolyte phases, charge transfer kinetics, charge balance, and electron transport processes. The model requires a separate pre-processing step to identify SVM parameters.

Kim, Gi-Heon↗

An innovative method to build a comprehensive kinetic model for air injection using TGA/DSC experiments

In order to study the AIP (air injection process), a practical method was developed to obtain the kinetic data for an AIP by matching the simulation model results with the TGA (thermogravimetry analysis) experiments in our previous work. However, one shortcoming for that method is the non-uniqueness of the kinetic data obtained. The other shortcoming is that TGA cannot measure the exothermic characteristics of a crude oil. The enthalpy values of the reactions are crucial for developing a comprehensive kinetic model as the enthalpy represents the heat generation of the chemical reaction and dominants the heat effect during the AIP. Here in this study, an innovative method is proposed to build a comprehensive kinetic model by combining both TGA/DSC (differential scanning calorimetry) experiments and simulation. In the low temperature interval, the distillation dominant stage is differentiated from the LTO (low temperature oxidation) stage by comparing the nitrogen purging TGA experiments and the air purging TGA experiments. Then, the LTO stage is further divided into several sub-divided reaction stages with corresponding temperature intervals by analyzing the TGA/DSC data. The kinetic data are estimated by applying the Arrhenius method to sub-divided reaction stages of the TGA experiments. In order to obtain the enthalpy values for oxidation reactions, the negative heat flow of the distillation process is eliminated by subtracting the nitrogen purging DSC data from the air purging DSC data, and the enthalpy values of corresponding reaction stages are obtained from the subtracted heat flow curve whose area of the exothermic peak represents the enthalpy value of a stage. Moreover, the pseudo components are defined based on the nitrogen purging TGA experiments which are associated with the sub-divided reaction stages defined previously to complete the kinetic model. Finally, the kinetic model is validated with the air purging TGA experiments. This study shows a detailed workflow to build a comprehensive kinetic model for AIP by TGA/DSC experiments. An application to a crude oil is also presented to demonstrate its practicability.

42 ENGINEERING↗

TOGA: A TOUGH code for modeling three-phase, multi-component, and non-isothermal processes involved in CO2-based Enhanced Oil Recovery (TOGA) v1.0

TOGA (TOUGH Oil, Gas, Aqueous) is a numerical reservoir simulator for modeling non-isothermal flow and transport of water, CO2, multicomponent oil, and related gas components for applications including CO2-enhanced oil recovery (CO2-EOR) and geologic carbon sequestration in depleted oil and gas reservoirs. TOGA uses an approach based on the Peng-Robinson equation of state (PR-EOS) to calculate the thermophysical properties of the gas and oil phases including the gas/oil components dissolved in the aqueous phase, and uses a mixing model to estimate the thermophysical properties of the aqueous phase.

Oldenburg, CurtisM↗

Advanced virtual energy simulation training and research: IGCC with CO2 capture power plant

In this presentation, we highlight the deployment of a real-time dynamic simulator of an integrated gasification combined cycle (IGCC) power plant with CO{sub 2} capture at the Department of Energy's (DOE) National Energy Technology Laboratory's (NETL) Advanced Virtual Energy Simulation Training and Research (AVESTARTM) Center. The Center was established as part of the DOE's accelerating initiative to advance new clean coal technology for power generation. IGCC systems are an attractive technology option, generating low-cost electricity by converting coal and/or other fuels into a clean synthesis gas mixture in a process that is efficient and environmentally superior to conventional power plants. The IGCC dynamic simulator builds on, and reaches beyond, conventional power plant simulators to merge, for the first time, a 'gasification with CO{sub 2} capture' process simulator with a 'combined-cycle' power simulator. Fueled with coal, petroleum coke, and/or biomass, the gasification island of the simulated IGCC plant consists of two oxygen-blown, downward-fired, entrained-flow, slagging gasifiers with radiant syngas coolers and two-stage sour shift reactors, followed by a dual-stage acid gas removal process for CO{sub 2} capture. The combined cycle island consists of two F-class gas turbines, steam turbine, and a heat recovery steam generator with three-pressure levels. The dynamic simulator can be used for normal base-load operation, as well as plant start-up and shut down. The real-time dynamic simulator also responds satisfactorily to process disturbances, feedstock blending and switchovers, fluctuations in ambient conditions, and power demand load shedding. In addition, the full-scope simulator handles a wide range of abnormal situations, including equipment malfunctions and failures, together with changes initiated through actions from plant field operators. By providing a comprehensive IGCC operator training system, the AVESTAR Center is poised to develop a workforce well-prepared to operate and control commercial-scale gasification-based power plants capable of 90% pre-combustion CO{sub 2} capture and compression, as well as low sulfur, mercury, and NOx emissions. With additional support from the NETL-Regional University Alliance (NETL-RUA), the Center will educate and train engineering students and researchers by providing hands-on 'learning by operating' experience The AVESTAR Center also offers unique collaborative R&D opportunities in high-fidelity dynamic modeling, advanced process control, real-time optimization, and virtual plant simulation. Objectives and goals are aimed at safe and effective management of power generation systems for optimal efficiency, while protecting the environment. To add another dimension of realism to the AVESTAR experience, NETL will introduce an immersive training system with innovative three-dimensional virtual reality technology. Wearing a stereoscopic headset or eyewear, trainees will enter an interactive virtual environment that will allow them to move freely throughout the simulated 3-D facility to study and learn various aspects of IGCC plant operation, control, and safety. Such combined operator and immersive training systems go beyond traditional simulation and include more realistic scenarios, improved communication, and collaboration among co-workers.

01 COAL, LIGNITE, AND PEAT↗

Application of an Embedded Fracture and Borehole Modeling Approach to the Understanding of EGS Collab Experiment 1

EGS Collab is a series of meso-scale experiments and associated numerical simulation activities being funded by the United States Department of Energy, Geothermal Technologies Office (GTO) to investigate enhanced geothermal system processes under in-situ stress and slightly elevated temperature conditions. This project is designed to provide scientists and engineers with immediate access to impermeable rock at scales larger than possible in the laboratory, but generally smaller than those for commercial production. Immediate access to rock is provided via the existing drifts of the former Homestake Gold Mine, now operated as the Sanford Underground Research Facility in Lead, South Dakota. The objectives of the EGS Collab project are to develop well controlled fracture networks between injector and producer boreholes using normal and shear stimulation for permeability enhancement. The first experimental site was located off the West Access drift on the 4850 Level (4850 feet below ground surface) in phyllite of the Precambrian Poorman formation, and involved the creation of a fracture network comprising a combination of hydraulic and natural fractures. A second experimental site is now being considered near the battery alcove on the 4100 Level in amphibolite and rhyolite of the Yates Unit. Data generated during these experiments will be compared against predictions of a suite of computer codes specifically designed to solve problems involving coupled thermal, hydrological, geomechanical, and geochemical processes. Comparisons between experimental and numerical simulation results will provide code developers with direction for improvements and verification of process models, build confidence in the suite of available numerical tools, and ultimately identify critical future development needs for the geothermal modeling community. Moreover, conducting thorough comparisons of models, modelling approaches, measurement approaches and measured data, via the EGS Collab project, will serve to identify techniques that are most likely to succeed at the Frontier Observatory for Research in Geothermal Energy (FORGE), the GTO’s flagship EGS research effort. Experiment 1 has comprised a series of successful tests, including a long-term chilled-water circulation test, but the testbed has two atypical EGS elements. Active ventilation in the adjacent drift over a 50-year period cooled the testbed rock mass and hydraulic fracturing intersected monitoring boreholes making them conduits for fluid flow. Numerical simulations executed in support of the design of the EGS Collab Experiment 1, computed a radial temperature distribution and stress gradient orthogonal to the drift axis, resulting in the forecast of an oblong hydraulic fracture geometry, extended in the direction of the drift from the stimulation borehole. This paper describes the numerical simulation of long-term chilled-water circulation test with an embedded fracture and borehole modeling approach. The principal objective of the simulation work is show agreement between experimental observations in terms of production fluid temperatures, monitoring borehole temperatures, injection and production pressures, and tracer recoveries using a single conceptual model for the fracture network, using characterization and monitoring data generally available for EGS. A secondary objective is to improve the numerical simulation result comparisons with additional data available from the broader monitoring equipment within the testbed versus deeper, hotter, and more remote EGS. One complicating factor for comparisons between the numerical simulation results and experimental observations, is the Joule-Thomson heating associated with large pressure drops across the fracture network.

numerical simulation, embedded fractures and boreh↗

An improved scaling procedure for analysis and simplification of process models

Systematic scaling analysis of model equations can be valuable as a tool for developing computationally tractable simulations of physical systems. The scaling analysis methods in literature pose difficulties in the calculation of scale and reference values, when nonlinear terms are involved in the model equations. Further, existing methods involve trial and error procedures in the scaling process. Here in this paper, a systematic approach for handling nonlinear terms is suggested, which results in appropriate scale and reference values that render the dimensionless variable variations to be of order one. Further, trial and error procedures are avoided through a new approach wherein a set of nonlinear algebraic equations are solved to identify the scale and reference values. The proposed scaling approach is common to any given model equations with fixed parameters. However, it is to be noted that the proposed procedure may not handle situations when model equations exhibit steady state multiplicity and have dynamic multi-mode regimes. The proposed scaling procedure is illustrated through various examples of different complexities. A 1D model of WGS reactor as a case study shows the effectiveness of the obtained scale and reference values in obtaining simplified model which represents the steady state and dynamic variations of the variables.

42 ENGINEERING↗

Model Data for the Mesh Convergence Study Demonstrating Benefits of Mixed-polyhedral Mesh in Integrated Hydrology Simulations

This archived model data is related to a study introducing a unique method that employs a stream-aligned mixed-polyhedral mesh to effectively and accurately represent river valleys, stream corridors, and narrow engineered channels in integrated hydrology simulations. The study finds that utilizing stream-aligned mixed-polyhedral meshes in integrated hydrology simulations achieves accuracy on par with a finely refined TIN-based mesh while markedly diminishing computational costs. This archive contains scripts and data files needed to generate the ATS model input, including mesh and ATS input files, for all mesh scenarios using the Watershed Workflow package. Additionally, this archive also provides key outputs from the model simulations that are used in the analysis and post-processing scripts to reproduce figures in the manuscript. The Watershed Workflow package is implemented in Python3. The Jupyter notebooks can be executed through multiple open-source tools, for example, Anaconda Jupyter Lab, VS Studio Code, etc. Other data files include CSV and HDF5 files, which can be read through Python scripts. The input files for the ATS model, open-source integrated hydrology, and transport model are in XML format and can be edited in any commonly used text editors.

54 ENVIRONMENTAL SCIENCES↗

Experimental design for the Marine Ice Sheet–Ocean Model Intercomparison Project – phase 2 (MISOMIP2)

The Marine Ice Sheet–Ocean Model Intercomparison Project – phase 2 (MISOMIP2) is a natural progression of previous and ongoing model intercomparison exercises that have focused on the simulation of ice-sheet and ocean processes in Antarctica. The previous exercises motivate the move towards realistic configurations, as well as more diverse model parameters and resolutions. The main objective of MISOMIP2 is to investigate the performance of existing ocean and coupled ice-sheet–ocean models in a range of Antarctic environments through comparisons to observational data. We will assess the status of ice-sheet–ocean modelling as a community and identify common characteristics of models that are best able to capture observed features. As models are highly tuned based on present-day data, we will also compare their sensitivity to prescribed abrupt atmospheric perturbations leading to either very warm or slightly warmer ocean conditions compared to the present day. The approach of MISOMIP2 is to welcome contributions of models as they are, including global and regional configurations, but we request standardized variables and common grids for the outputs. We target the analysis at two specific regions, the Amundsen Sea and the Weddell Sea, since they describe two different ocean environments and have been relatively well observed compared to other areas of Antarctica. An observational “MIPkit” synthesizing existing ocean and ice-sheet observations for a common period is provided to evaluate ocean and ice-sheet models in these two regions.

58 GEOSCIENCES↗

Modification of the TASMIP x-ray spectral model for the simulation of microfocus x-ray sources

Purpose: The availability of accurate and simple models for the estimation of x-ray spectra is of great importance for system simulation, optimization, or inclusion of photon energy information into data processing. There is a variety of publicly available tools for estimation of x-ray spectra in radiology and mammography. However, most of these models cannot be used directly for modeling microfocus x-ray sources due to differences in inherent filtration, energy range and/or anode material. For this reason the authors propose in this work a new model for the simulation of microfocus spectra based on existing models for mammography and radiology, modified to compensate for the effects of inherent filtration and energy range. Methods: The authors used the radiology and mammography versions of an existing empirical model [tungsten anode spectral model interpolating polynomials (TASMIP)] as the basis of the microfocus model. First, the authors estimated the inherent filtration included in the radiology model by comparing the shape of the spectra with spectra from the mammography model. Afterwards, the authors built a unified spectra dataset by combining both models and, finally, they estimated the parameters of the new version of TASMIP for microfocus sources by calibrating against experimental exposure data from a microfocus x-ray source. The model was validated by comparing estimated and experimental exposure and attenuation data for different attenuating materials and x-ray beam peak energy values, using two different x-ray tubes. Results: Inherent filtration for the radiology spectra from TASMIP was found to be equivalent to 1.68 mm Al, as compared to spectra obtained from the mammography model. To match the experimentally measured exposure data the combined dataset required to apply a negative filtration of about 0.21 mm Al and an anode roughness of 0.003 mm W. The validation of the model against real acquired data showed errors in exposure and attenuation in line with those reported for other models for radiology or mammography. Conclusions: A new version of the TASMIP model for the estimation of x-ray spectra in microfocus x-ray sources has been developed and validated experimentally. Similarly to other versions of TASMIP, the estimation of spectra is very simple, involving only the evaluation of polynomial expressions.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Progress in Initiator Modeling

There is great interest in applying magnetohydrodynamic (MHD) simulation techniques to the designs of electrical high explosive (HE) initiators, for the purpose of better understanding a design's sensitivities, optimizing its performance, and/or predicting its useful lifetime. Two MHD-capable LLNL codes, CALE and ALE3D, are being used to simulate the process of ohmic heating, vaporization, and plasma formation in the bridge of an initiator, be it an exploding bridgewire (EBW), exploding bridgefoil (EBF) or slapper type initiator. The initiation of the HE is simulated using Tarver Ignition & Growth reactive flow models. 1-D, 2-D and 3-D models have been constructed and studied. The models provide some intuitive explanation of the initiation process and are useful for evaluating the potential impact of identified aging mechanisms (such as the growth of intermetallic compounds or powder sintering). The end product of this work is a simulation capability for evaluating margin in proposed, modified or aged initiation system designs.

42 ENGINEERING↗

Production of the entire range of r -process nuclides by black hole accretion disc outflows from neutron star mergers

We consider r -process nucleosynthesis in outflows from black hole accretion discs formed in double neutron star and neutron star–black hole mergers. These outflows, powered by angular momentum transport processes and nuclear recombination, represent an important – and in some cases dominant – contribution to the total mass ejected by the merger. Here we calculate the nucleosynthesis yields from disc outflows using thermodynamic trajectories from hydrodynamic simulations, coupled to a nuclear reaction network. We find that outflows produce a robust abundance pattern around the second r -process peak (mass number A ~ 130), independent of model parameters, with significant production of A < 130 nuclei. This implies that dynamical ejecta with high electron fraction may not be required to explain the observed abundances of r -process elements in metal poor stars. Disc outflows reach the third peak (A ~ 195) in most of our simulations, although the amounts produced depend sensitively on the disc viscosity, initial mass or entropy of the torus, and nuclear physics inputs. Some of our models produce an abundance spike at A = 132 that is absent in the Solar system r -process distribution. The spike arises from convection in the disc and depends on the treatment of nuclear heating in the simulations. We conclude that disc outflows provide an important – and perhaps dominant – contribution to the r -process yields of compact binary mergers, and hence must be included when assessing the contribution of these systems to the inventory of r -process elements in the Galaxy.

79 ASTRONOMY AND ASTROPHYSICS↗