Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Influence of tower shadow on downwind flexible rotors: Field tests and simulations

Abstract As wind turbine rotors become larger, the blades become more flexible, requiring extra stiffness and cost to avoid the risk of tower strike. Wind turbines in a downwind configuration have a reduced risk of tower strike because the rotor thrust acts away from the tower. However, downwind blades pass through the wake of the tower, and the resulting load variation may contribute to blade fatigue. To date, there have been no field tests to quantify this tower shadow effect on unsteady blade moments. The present study reports on the first field testing of a flexible, downwind, coned rotor and compares the experimental data against simulations run in OpenFAST. The tower shadow effect is simulated using the conventional Powles model and a new Eames model (developed herein), which includes the influence of upstream turbulence. Both models reasonably predict the blade root out‐of‐plane bending moment data and the tower shadow dip magnitude when compared to field test data in Region 3. Tower shadow was found to increase the short‐term Damage Equivalent Loads (DELs) by less than 10% compared to other effects (gravity, shear, and turbulence), and the predictions were consistent with experiments. These results indicate that the tower shadow effect can be reasonably modeled with the simpler Powles model and that the tower shadow effect can be small compared to the effect of turbulence. However, long‐term fatigue due to tower shadow should be included in detailed structural analysis and design of the rotor and the tower.

Simpson, Juliet G.↗

Effects of Inorganic Antiseptic on the Properties of Zein-Based Active Films

Zein, one of corn processing byproducts, has excellent film-forming ability. However, zein does not have intrinsic antibacterial or antioxidant activity which limits its direct applicability as active food packaging material. In the present study, the rod-shaped micro-sized ZnO crystals were incorporated into zein films to construct zein-based active films as active packaging material with antibacterial property. The morphologies, structural analysis and sizes of ZnO crystals were analyzed by field emission scanning electron microscope and X-ray diffraction. Prepared zein films were evaluated for ZnO loading and distribution. Furthermore, antibacterial activities on Gram-negative bacteria and Gram-positive bacteria were tested by using the disc diffusion method. Lastly, the stability of zein-based active films under the different storage temperature and humidity was investigated. The results showed that zein based-active films had well mechanical properties, stability and antibacterial activities, which were related to the sizes of ZnO crystals in films.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Monofilamentary In Situ Fe/MgB{sub 2} Superconducting Wires Fabricated by Pellet-in-Tube Method

Thin monofilamentary Fe/MgB{sub 2} superconducting wires without barriers are investigated by means of electrical transport measurements and surface and structural analysis methods. Small diameter wires are fabricated by pellet-in-tube method (PeIT) to obtain a high uniform initial filling density and heat treated as a function of various sintering temperatures and times. The results are discussed in terms of the grain connectivity, Fe{sub 2}B phase formation, and the relation between wire diameter and sintering conditions. We suggest that PeIT has a crucial importance to achieve homogeneous initial filling density, which leads to the fabrication of uniform long-length MgB{sub 2} wires.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic and Structural Properties of SrFe{sub 12−x}Cr{sub x}O{sub 19} (x = 0, 0.25, 0.5, 0.75, 1) Hexaferrite Powders Obtained by Sol–Gel Auto-Combustion Method

The crystalline structure and magnetic properties of chromium substituted hexagonal strontium ferrite, SrFe{sub 12−x}Cr{sub x}O{sub 19} (x = 0, 0.25, 0.5, 0.75, 1), nanoparticles have been investigated by means of X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), and vibrating sample magnetometer (VSM). These materials were prepared by the chemical sol–gel auto-combustion method. From the structural analysis, it was observed that the non-magnetic phase α-Fe{sub 2}O{sub 3} appears after x ≥ 0.5 and remains to be a hexagonal magnetoplumbite phase for x < 0.5. Various parameters such as lattice constants (a and c) were calculated from the XRD data. The coercively H{sub c} initially decreases and then increases with increasing chromium concentration. The saturation magnetization exhibits an increase as the chromium content increases up to (x = 0.25) and then decreases with increase in the Cr content ion from 75.19 to 61.66 emu/g due to the substitution of Fe{sup 3+} ions by less magnetic Cr{sup 3+} ions. Furthermore, M{sub r} continually decreases with increase in the Cr content.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin Dimer Formation in BaTi{sub 0.67−x}Mn{sub 0.33 + x}O{sub 3} (x = - 0.02, - 0.01, 0, 0.01, and 0.02)

Mn concentration of 6H-Ba{sub 3}Ti{sub 2}MnO{sub 9} was adjusted slightly to deviate from stoichiometric ratios. Our structural analysis shows that the spin dimer may form with Mn concentration slightly higher than stoichiometric. The magnetic properties are explored by combining DC magnetization and X-band (9.4 GHz) electron spin resonance (ESR). DC magnetization shows the signature of combination of frustrated spin and short-range spin. ESR shows that spin dimer can be formed in BaTi{sub 0.65}Mn{sub 0.35}O{sub 3}, while no signature of spin dimer can be found in BaTi{sub 0.69}Mn{sub 0.31}O{sub 3} and Ba{sub 3}Ti{sub 2}MnO{sub 9}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hexanuclear and Heptanuclear Nickel(II) Complexes of with a Non-Schiff-Base Tetradentate Ligand: an Example of Slow Motion Ferromagnetic Phase Transition at Very Low Temperature

Hexanuclear and heptanuclear nickel(II) complexes with N,N′-bis(2-hydroxy-3,5-dimethylbenzyl-1,2-ethanediamine (H{sub 2}hdde), [Ni{sub 6}(hdde){sub 3}(OH){sub 4}(NO{sub 3}){sub 2}(H{sub 2}O){sub 2}]·2dmf (dmf = N,N-dimethylformamide) and [Ni{sub 7}(hdde){sub 3}(OH){sub 6}(dmac){sub 3}](ClO{sub 4}){sub 2} (dmac = N,N-dimethylacetamide), were investigated. The latter complex was newly synthesized and the single-crystal X-ray structure analysis revealed a wheel-shaped heptanuclear cluster. These complexes showed a ferromagnetic interaction in the temperature dependence of magnetic susceptibilities. The micro-SQUID data of the former complex did not show SMM property, whereas the AC susceptibility measurements suggested SMM-like behavior and the zero-field-cooled and field-cooled studies showed a ferromagnetic transition near 240 mK for the latter complex.

36 MATERIALS SCIENCE↗

Martensitic Transformation and Magnetocaloric Effect in High-Pressure Synthesized Ni{sub 53}Mn{sub 23.5}Ga{sub 23.5} Alloys

The polycrystalline Ni{sub 53}Mn{sub 23.5}Ga{sub 23.5} ferromagnetic alloy was synthesized by high-pressure method. The Ni{sub 53}Mn{sub 23.5}Ga{sub 23.5} ribbons were prepared by melt-spinning; then, the ribbons were pressed to the bulk samples under the 6-GPa high-pressure and heated to 1173 K for 30 min. The surface morphology, phase transition, and magnetocaloric effect (MCE) were investigated in the Ni{sub 53}Mn{sub 23.5}Ga{sub 23.5} bulk sample. Structural analysis and magnetic measurements studies of the bulk samples revealed the martensitic transformation at room temperature with a low thermal hysteresis of magnetization, and the nanocrystalline was observed by atomic force microscope measurements. The Ni{sub 53}Mn{sub 23.5}Ga{sub 23.5} bulk sample exhibits the directionality, and the magnetic properties have the large magnetization and low coercivity when the sample direction of the applied pressure was perpendicular to the direction of the applied magnetic field. The maximum entropy changes (∆S{sub M}) of − 4.8 J/kg K have been obtained at 330 K under the field of 30 kOe in the Ni{sub 53}Mn{sub 23.5}Ga{sub 23.5} bulk sample.

36 MATERIALS SCIENCE↗

Signatures of Quantum Transport Steps in Bi{sub 2}Se{sub 3} Single Crystal

We report signatures of quantum magneto transport steps in a Bi{sub 2}Se{sub 3} single crystal. The Bi{sub 2}Se{sub 3} crystal is grown by self-flux method through solid-state reaction. Details of its structural analysis along with physical properties in terms of low temperature and high field transport, thermal (heat capacity), Raman, X-ray photo electron and angle resolved photo electron spectroscopy were reported earlier (J. Sup. Novel. Mag. 30, 2031 2017). In a present short letter, we show the details of its 2 K and up to 14 Tesla magneto transport, exhibiting quantum transport (QT) like steps above say 11 Tesla field. The possible QT steps cannot be modelled with the SdH (Shubnikov-de Haas) or other possible quantum oscillations. The observed QT like steps are possibly the result of the mixed out-of-plane R{sub xy}(H) and in-plane R{sub xx}(H) contributions from the misaligned [00l] planes of the studied crystal and this may happen with other studied topological insulator (TI) crystals as well. Our careful assessment of crystal XRD data shows the same.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cross-Linking and Mass Spectrometry Methodologies to Facilitate Structural Biology: Finding a Path through the Maze

Multiprotein complexes, rather than individual proteins, make up a large part of the biological macromolecular machinery of a cell. Understanding the structure and organization of these complexes is critical to understanding cellular function. Chemical cross-linking coupled with mass spectrometry is emerging as a complementary technique to traditional structural biology methods and can provide low-resolution structural information for a multitude of purposes, such as distance constraints in computational modeling of protein complexes. In this review, we discuss the experimental considerations for successful application of chemical cross-linking-mass spectrometry in biological studies and highlight three examples of such studies from the recent literature. These examples (as well as many others) illustrate the utility of a chemical cross-linking-mass spectrometry approach in facilitating structural analysis of large and challenging complexes.

Environmental Molecular Sciences Laboratory↗

Composition dependence of structural and optical properties of Ge{sub x}Se{sub 100−x} semiconducting thin films

The studied thin films of Ge{sub x}Se{sub 100−x} compositions were synthesized with thermal evaporation technique at room temperature. The effect of composition on the structure of the prepared films was characterized by X-ray diffraction and scanning electron microscopy. The stoichiometry of the studied compositions was examined by energy dispersive X-ray spectroscopy. The film thickness and refractive index were calculated by Swanepoel’s method. The structural analysis showed that the as-prepared Ge{sub x}Se{sub 100−x} (x = 10, 15, 20 and 30 at.%) films exhibit the amorphous state while other films containing 25, 35 and 40 at.% of Ge are polycrystalline. On the other hand, the GeSe and Se crystalline phases are obtained for the annealed films. The analysis of the optical spectra showed that E{sub g} increases with increasing Ge content up to a x = 30 at.% and then decreases with further increase of the Ge concentration. Other many optical parameters such as optical conductivity, dispersion energy and dissipation factor were determined and strongly affected by the variation of the composition.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Influence of Dynamic Three Point Bending on the Work Hardening Capacity of T105Mn120 Manganese Steel

The paper analyzes work hardening behavior of T105Mn120 Hadfield steel under dynamic conditions. The specimens were investigated under two states: (a) untreated (as cast) and (b) solution treated to 1100 °C. Dynamic flexural behavior was examined by means of three-point-bending tests performed with a dynamic mechanical analyser (DMA), and structural analysis was done by x-ray diffraction, optical and scanning electron microscopy; DMA tests were performed under two variants: (a) temperature scans, between − 150 and 400 °C and (b) isothermal strain sweeps, up to 0.15% strain amplitudes. The former emphasized the critical temperatures of thermally induced reversible martensitic transformation and antiferromagnetic–paramagnetic phase transition, while the latter enabled to monitor the storage modulus increase due to the work hardening caused by dynamic bending. Strain sweeps tests revealed the effects of both dynamic bending frequency and number of cycles. The largest work hardening effect, obtained after five strain sweep cycles applied at the frequency of 5 Hz, was associated with the finest distribution of precipitated carbides, observed by differential scanning calorimetry and the formation of slip micro-bands, illustrated on OM micrographs and SEM energy dispersion spectroscopy maps.

36 MATERIALS SCIENCE↗

Gating System Design Optimization for Investment Casting Process

This article aims to optimize specific castings, characterized as an element of the continuous track for armored vehicle. During the primary melts, defects in the form of oxide films and shrinkage porosity occurred. Steel 20ChGSNM described by the Russian GOST standard was used as a batch material, and the investment casting method was selected for production. To eliminate the above-mentioned defects, only changes in the gating system were allowed, because the interference with an ongoing production regarding technical and technological parameters was unacceptable by the manufacturer. Numerical simulation, x-ray, macro-structural and micro-structural analysis were used during the optimization process. The three variants were analyzed, and the achieved results demonstrated that it is possible to significantly affect the casting internal homogeneity by modifying the gating system individual parts. The final variant ensured a decrease in defects by up to 90% and the production of casting having the quality required by the customer.

36 MATERIALS SCIENCE↗

Solvothermal Synthesis, Structure and Optical Property of Nanosized CoSb 3 Skutterudite

Binary skutterudite CoSb 3 nanoparticles were synthesized by solvothermal method. The nanostructuring of CoSb 3 material was achieved by the inclusion of various kinds of additives. X-ray diffraction examination indicated the formation of the cubic phase of CoSb 3 . Structural analysis by transmission electron microscopy analysis further confirmed the formation of crystalline CoSb 3 nanoparticles with high purity. With the assistance of additives, CoSb 3 nanoparticles with size as small as 10 nm were obtained. The effect of the nanostructure of CoSb 3 on the UV–visible absorption and luminescence was studied. The nanosized CoSb 3 skutterudite may find application in developing thermoelectric devices with better efficiency.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mechanical Behavior of Additively Manufactured Molybdenum and Fabrication of Microtextured Composites

Refractory metals are a class of high-melting-temperature materials suitable for use in extreme environment applications. Interestingly, during additive manufacturing many pure refractory metals exhibit a switch from (001) to (111) build direction fiber preference with increasing surface energy density. Here we exploit this solidification physics to fabricate material with “mesoscale composite” engineered structures consisting of features with contrasting (001) and (111) build direction microtextures. Separately, elevated temperature tensile testing of EBM fabricated material with a randomized distribution of mixed (001)/(111)-fiber grains is shown to exhibit excellent properties. These results are utilized to build a crystal plasticity model for evaluating the local inelastic response of the composite mesoscale structures. Analysis of printed microstructures and microstructure-scale simulations indicate that both macro-scale and localized material behavior may be tailored. This strategy can be potentially used to synthesize materials with optimized performance for high-temperature applications.

36 MATERIALS SCIENCE↗

A study of mechanistic mapping of novel SNPs to male breast cancer

Alterations in BRCA2, PALB2, CHEK2, and p53 genes have been identified for their association with male breast cancer in various studies. The incidence of male breast cancer in India is consistent with its global rate. The present study was carried out with an aim to evaluate the genetic alterations in male breast cancer patients from Malwa region of Punjab, India. Four male breast cancer patients belonging to different families were recruited from Guru Gobind Singh Medical College and Hospital, Faridkot, India. A total of 51 genes reported with implications in the pathogenesis of breast cancer were screened using next generation sequencing. Germline variations were found in BRCA1, BRCA2, PMS2, p53, and PALB2 genes, previously reported to be associated with MBC as well as FBC. In addition to these, 13 novel missense alterations were detected in eight genes including STK11, FZR1, PALB2, BRCA2, NF2, BAP1, BARD1, and CHEK2. Impact of these missense alterations on structure and function of protein was also analyzed through molecular dynamics simulation. Structural analysis of these single nucleotide polymorphisms (SNPs) revealed significant impact on the encoded protein functioning.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Detection of Neutral CO Lost During Ionic Dissociation Using Atmospheric Pressure Thermal Dissociation Mass Spectrometry (APTD-MS)

Elucidation of ion dissociation patterns is particularly important to structural analysis by mass spectrometry (MS). However, typically, only the charged fragments from an ion dissociation event are detected in tandem MS experiments; neutrals are not identified. In recent years, we have developed an atmospheric pressure thermal dissociation (APTD) technique that can be applied to dissociate ions at atmosphere pressure and thus provide one way to characterize neutral fragments. In this paper, we focus on the detection of neutral CO resulting from amino acid and peptide ion dissociation. In the first set of experiments, several protonated amino acids (e.g., + 1 ion of phenylalanine) were found to undergo loss of a neutral (s) of total mass 46 Da, a process leading to iminium ion formation. We successfully detected the neutral species CO by using a CO sensor, UV-Vis and MS analysis following selective CO trapping with a rhodium complex. The capture of CO from dissociation of protonated amino acids supports the assignment of the loss of 46 Da to neutral losses of CO and H{sub 2}O, rather than loss of formaldehyde or dihydroxycarbene, other possible fragmentation pathways that have been subject of debate for a long time. In a second experiment, we used the APTD method in combination with the CO detection technique, to demonstrate the formation of CO in the conversion of b ions to a ions during peptide ion dissociations. These results showed the potential of APTD in the elucidation of ion dissociation mechanisms, using simple home-built apparatus. .

74 ATOMIC AND MOLECULAR PHYSICS↗

Evidence for strong electronic correlations in the bulk state of grey arsenic

Here, we investigate the electron band structure of grey arsenic, whose (111) face hosts the topological Shockley state. Interestingly, the bulk band close to the touching point with the surface state exhibits the characteristics of inelastic scattering. Moreover, the band structure analysis reveals linearity in the imaginary part of electron self-energy. These features are analogous to those observed in high-temperature superconductors and marginal Fermi liquid systems, respectively, where strong electronic correlations exist. Our results suggest that correlated many-body states can be connected by non-interacting topological states, providing a viable playground to explore the coupling between topological and correlated states via grey arsenic surface.

ARPES↗

Toward large-scale simulation of residual stress and distortion in wire and arc additive manufacturing

In this study, we aim to advance the structural analysis of wire and arc additive manufacturing (WAAM) by considering the thermomechanical features inherent in direct energy deposition. Simulation approaches including the iterative substructure method (ISM), dynamic mesh refining method (DMRM), and graphics processing unit (GPU) based explicit finite element method (FEM) were developed for accelerating additive manufacturing stress analysis that is very time consuming by conventional numerical methods. ISM and DMRM take advantage of the strong nonlinearity phenomenon near the moving heat source by reducing the global iterations and refining the local mesh, respectively. In addition to the use of GPUs, the explicit FEM is accelerated by a time scaling technique based on the inherent strain concept. The residual stress and distortion of two large builds were analyzed, showing very consistent numerical results and good agreement with experiments. Compared with the commercial software Abaqus, the novel approaches reduced the computational cost substantially without compromising accuracy. The GPU code showed the highest computational efficiency (30~70×), while DMRM and ISM had acceleration factors of 9× and 3×, respectively. Finally, such high-fidelity modeling approaches will be very useful for building up a digital twin of WAAM to reduce development time and cost.

36 MATERIALS SCIENCE↗