Search NASA⌕ Search

SEARCH · Search NASA

Results for “texturization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

A meta-analysis of global cropland soil carbon changes due to cover cropping

Including cover crops within agricultural rotations may increase soil organic carbon (SOC). However, contradictory findings generated by on-site experiments make it necessary to perform a comprehensive assessment of interactions between cover crops, environmental and management factors, and changes in SOC. In this study, we collected data from studies that compared agricultural production with and without cover crops, and then analyzed those data using meta-analysis and regression. Our results showed that including cover crops into rotations significantly increased SOC, with an overall mean change of 15.5% (95% confidence interval of 13.8% to 17.3%). Whereas medium-textured soils had highest SOC stocks with (mean = 39 Mg ha-1) and without (mean = 37 Mg ha-1) cover crops, fine-textured soils showed the greatest increase in SOC after the inclusion of cover crops (mean change of 39.5%). Coarse-textured (11.4%) and medium-textured soils (10.3%) had comparatively smaller changes in SOC. Cover crop mixtures resulted in greater increases in SOC compared to mono-species cover crops, and using legumes resulted in greater SOC increases than grasses and broadleaf species. Cover cropping was associated with significant SOC increases in shallow soils (= 30 cm), but not in subsurface soils (> 30 cm). The regression analysis revealed that SOC changes from cover cropping were correlated with improvements in soil quality, specifically decreased runoff and erosion and increased mineralizable carbon, mineralizable nitrogen, and soil nitrogen. Soil carbon change was also affected by annual temperature, number of years after start of cover crop usage, latitude, and initial SOC concentrations. Finally, the mean rate of carbon sequestration from cover cropping across all studies was 0.56 Mg ha-1 yr-1. If 15% of current global cropland were to adopt cover crops, this value would translate to 0.17 Pg of carbon sequestered per year or ~1-2% of current fossil fuels emissions. Altogether, these results indicated that inclusion of cover crops into agricultural rotations can enhance soil carbon concentrations, improve many soil quality parameters, and serve as a potential sink for atmosphere CO2.

Cover crop, soil organic carbon, soil quality, soi↗

Lipids represent a dynamic, yet stable pool of microbially-derived soil carbon

There is an emerging consensus that microorganisms are a primary source of persistent, slow-cycling soil organic matter (SOM), however which microbial residues contribute to SOM and what controls their accumulation remains unresolved. Lipids are a commonly overlooked biomolecular pool that could contribute significantly to stable SOM. While current estimates for phospholipid degradation in soils are rapid, lipids are structurally heterogeneous molecules that could turnover at different rates. Through a year-long soil incubation and compound-specific, stable isotope probing (SIP)-lipidomics, we were able to rigorously track the persistence of lipid compounds in silty and sandy switchgrass bioenergy crop soils. Here, we assessed the influence of lipid structure on soil lipid accrual and degradation as moderated by soil texture, since mineral association is presumed to be the primary mechanism for lipid persistence. After rapid incorporation of 13 C glucose into microbial biomass, we found 13 C label was retained broadly across chemically diverse lipid classes, even after one year. 13 C-labeled lipid profiles varied significantly with soil texture; however, we found no difference between sandy and silty soils in lipid retention, suggesting soil texture may only play a minor role in modulating lipid persistence. Only two lipid subclasses were found to be persistent (i.e., retention of 13 C label without significant degradation or production): phosphatidylinositol lipids and hydroxyceramide lipids, both of which are negatively charged, possibly facilitating stabilization by mineral complexation. However, several other subclasses displayed substantial ongoing production. In particular, the accumulation of triacylglycerol lipids across soil textures suggests that storage lipids may be an important component of SOC, highlighting a potential target for management strategies to promote C retention by lipid accrual. Overall, the retention for over a year of 13 C label in microbial intact lipid biomarkers reveals the importance of efficient biomass production and turnover when considering microbial C contributions to SOM.

compound-specific↗

Emissivity of solar cell cover glass calculated from infrared reflectance measurements

The thermal emissivity of solar cell cover glasses with differences in glass composition or manufacture and surface texture are evaluated using specular and specular+diffuse infrared reflectance at different angles of incidences. Non-textured and textured glasses all exhibit similar emissivity at all angles of incidence regardless of composition and patterning. Both diffuse and specular reflectance must be included for textured glass at any angle of incidence and may be needed for planar glass at a high angle of incidences to properly determine emissivity.

14 SOLAR ENERGY↗

Growth of Epitaxial gamma-Al 2 O 3 Films on Rigid Single-Crystal Ceramic Substrates and Flexible, Single-Crystal-Like Metallic Substrates by Pulsed Laser Deposition

Epitaxial -Al2O3 thin films were grown on diverse substrates using pulsed laser deposition. The high quality of epitaxial growth and cubic structure of -Al2O3 films was confirmed by x-ray diffraction. SrTiO3 and MgO single crystal substrates were used to optimize the growth conditions for epitaxial -Al2O3 film. Under the optimized conditions, epitaxial -Al2O3 thin films were grown on flexible, single-crystal-like, metallic templates. These included untextured Hastelloy substrates with a biaxially textured MgO layer deposited using ion-beam-assisted-deposition and biaxially textured Ni-W metallic tapes with epitaxially grown and a biaxially textured, MgO buffer layer. These biaxially textured, -Al2O3 films on flexible, single-crystal-like substrates are promising for subsequent epitaxial growth of various complex oxide films used for electrical, magnetic and electronic device applications.

36 MATERIALS SCIENCE↗

Design and Control of Three-Dimensional Topological Magnetic Fields Using Interwoven Helical Nanostructures

Three-dimensional (3D) magnetic nanostructures are an emerging platform capable of creating complex topological magnetic fields. The control of localized nanoscale magnetic fields is seen to be of importance for diverse areas from bioapplications such as drug delivery, to particle trapping and controlling Majorana Fermions for quantum computing. Three-dimensional geometric confinement and proximity can create tailor-made spin textures not possible in two dimensions. The control of magnetization afforded here can allow the formation of unique stray field textures. Here, we report the creation of reconfigurable 3D topological magnetic field textures induced by an interwoven 3D nanostructure and applied field protocol. These field textures emerge due to distinct DWs formed in this structure and lead to the creation of an antivortex field, a hexapole cusp and a 3D skyrmion field tube of mixed chirality. In conclusion, our results therefore show a key step toward the design and control of topological magnetic fields on the nanoscale.

36 MATERIALS SCIENCE↗

Chemical disorder in topological insulators: A route to magnetism tolerant topological surface states

Here, we show that the chemical inhomogeneity in ternary three-dimensional topological insulators preserves the topological spin texture of their surface states against a net surface magnetization. The spin texture is that of a Dirac cone with helical spin structure in the reciprocal space, which gives rise to spin-polarized and dissipation-less charge currents. Thanks to the nontrivial topology of the bulk electronic structure, this spin texture is robust against most types of surface defects. However, magnetic perturbations break the time-reversal symmetry, enabling magnetic scattering and loss of spin coherence of the charge carriers. This intrinsic incompatibility precludes the design of magnetoelectronic devices based on the coupling between magnetic materials and topological surface states. We demonstrate that the magnetization coming from individual Co atoms deposited on the surface can disrupt the spin coherence of the carriers in the archetypal topological insulator Bi 2 Te 3 , while in Bi 2 Se 2 Te the spin texture remains unperturbed. This is concluded from the observation of elastic backscattering events in quasiparticle interference patterns obtained by scanning tunneling spectroscopy. The mechanism responsible for the protection is investigated by energy resolved spectroscopy and ab initio calculations, and it is ascribed to the distorted adsorption geometry of localized magnetic moments due to Se–Te disorder, which suppresses the Co hybridization with the surface states.

3D topological insulators↗

Chemo‐mechanical Alterations Induced From CO 2 Injection in Carbonate‐Cemented Sandstone: An Experimental Study at 71 °C and 29 MPa

Abstract Carbon capture, utilization, and storage may lead to mechanical degradation of the subsurface reservoir from fluid‐rock interaction, which could lead to wellbore instability or reservoir compaction. To better understand potential relationship between mechanical degradation with various carbonate cement textures and compositions in sandstone reservoirs, six flow‐through experiments were conducted. Formation water (TDS = 5,390 mg/L) enriched with CO 2 flowed through two types of Pennsylvanian Morrow B Sandstone: an ankerite‐siderite‐cemented sandstone (disseminated cement texture) and a calcite‐cemented sandstone (poikilotopic cement texture). The experiments produced little change in permeability in the ankerite‐siderite‐cemented sandstone, but permeability increased up to more than 1 order of magnitude in the calcite‐cemented sandstone. Ultrasonic measurements and cylinder‐splitting tests (also known as Brazilian tests) suggested negligible mechanical degradation of the ankerite‐siderite‐cemented sandstone. Variable changes, with significant mechanical degradation in the static moduli, were observed in the calcite‐cemented sandstone. Thus, dissolution of the disseminated ankerite‐siderite cement (0.28–0.30%) had minimal impact on modifying the flow network and the mechanical integrity of the sandstone, whereas dissolution of the poikilotopic calcite cement (0.89–1.13%, quantified with fluid chemistry and visualized with X‐ray microcomputed tomography) impacted the mechanical strength of the sandstone by disconnecting framework grains. With the high water‐to‐rock mass ratios (7.3–8.2) and number of pore volumes (147–675) employed in these experiments, potential risks are most relevant to regions near injection wells. Ultimately, the chemo‐mechanical effects induced by CO 2 injection are strongly influenced by the cement texture and composition and the burial history of the reservoir rock.

Wu, Z.↗

Reducing crystal symmetry to generate out-of-plane Dzyaloshinskii–Moriya interaction

The Dzyaloshinskii-Moriya antisymmetric exchange interaction (DMI) stabilises topological spin textures with promising future spintronics applications. According to crystal symmetry, the DMI can be categorized as four different types that favour different chiral textures. Unlike the other three extensively-investigated types, out-of-plane DMI, as the last type that favours in-plane chirality, remained missing so far. Here we apply point-group-dependent DMI matrix analysis to show that out-of-plane DMI exists under reduced crystal symmetry. Through strain and structure engineering, we show how C s symmetry is realized in ultrathin magnets and observe the out-of-plane DMI stabilised in-plane chirality using spin-polarized electron microscopy. Our results show that extremely low out-of-plane DMI strengths at µeV/atom are sufficient to stabilise topological spin textures, including merons and bimerons. We also demonstrate field-induced reversible control of the in-plane chirality and merons. Our findings open up untapped paths on topological magnetic textures and their potential applications.

36 MATERIALS SCIENCE↗

Creation of artificial skyrmions and antiskyrmions by anisotropy engineering

Topological spin textures form a fundamental paradigm in solid state physics and present unique opportunities to explore exciting phenomena such as the quantum Hall effect. One such non-trivial spin texture is a skyrmion, in which the spins can be mapped to point in all directions wrapping around a sphere. Understanding the formation of these spin textures, and their topological and energetic stability, is crucial in order to control their behavior. In this work, we report on controlling the anisotropy of continuous Co/Pt multilayer films with ion irradiation to form unique domain configurations of artificial skyrmions and antiskyrmions. We elucidate their behavior using aberration-corrected Lorentz transmission electron microscopy. We also discuss the energetic stability of these structures studied through in-situ magnetizing experiments performed at room temperature, combined with micromagnetic simulations that successfully reproduce the spin textures and behavior. As a result, this research offers new opportunities towards creation of artificial skyrmion or antiskyrmion lattices that can be used to investigate not only fundamental properties of their interaction with electron currents but also technological applications such as artificial magnonic crystals.

36 MATERIALS SCIENCE↗

Influence of high power impulse magnetron sputtering plasma ionization on the microstructure of TiN thin films

HIPIMS (High Power Impulse Magnetron Sputtering) discharge is a new PVD technology for the deposition of high-quality thin films. The deposition flux contains a high degree of metal ionization and nitrogen dissociation. The microstructure of HIPIMS-deposited nitride films is denser compared to conventional sputter technologies. However, the mechanisms acting on the microstructure, texture and properties have not been discussed in detail so far. In this study, the growth of TiN by HIPIMS of Ti in mixed Ar and N{sub 2} atmosphere has been investigated. Varying degrees of metal ionization and nitrogen dissociation were produced by increasing the peak discharge current (I{sub d}) from 5 to 30 A. The average power was maintained constant by adjusting the frequency. Mass spectrometry measurements of the deposition flux revealed a high content of ionized film-forming species, such as Ti{sup 1+}, Ti{sup 2+} and atomic nitrogen N{sup 1+}. Ti{sup 1+} ions with energies up to 50 eV were detected during the pulse with reducing energy in the pulse-off times. Langmuir probe measurements showed that the peak plasma density during the pulse was 3 x 10{sup 16} m{sup -3}. Plasma density, and ion flux ratios of N{sup 1+}: N{sub 2}{sup 1+} and Ti{sup 1+}: Ti{sup 0} increased linearly with peak current. The ratios exceeded 1 at 30 A. TiN films deposited by HIPIMS were analyzed by X-ray diffraction, and transmission electron microscopy. At high I{sub d}, N{sup 1+}: N{sub 2}{sup 1+} > 1 and Ti{sup 1+}: Ti{sup 0} > 1 were produced; a strong 002 texture was present and column boundaries in the films were atomically tight. As I{sub d} reduced and N{sup 1+}: N{sub 2}{sup 1+} and Ti{sup 1+}: Ti{sup 0} dropped below 1, the film texture switched to strong 111 with a dense structure. At very low I{sub d}, porosity between columns developed. The effects of the significant activation of the deposition flux observed in the HIPIMS discharge on the film texture, microstructure, morphology and properties are discussed.

36 MATERIALS SCIENCE↗

Disorder improves nanophotonic light trapping in thin-film solar cells

We present a systematic experimental study on the impact of disorder in advanced nanophotonic light-trapping concepts of thin-film solar cells. Thin-film solar cells made of hydrogenated amorphous silicon were prepared on imprint-textured glass superstrates. For periodically textured superstrates of periods below 500 nm, the nanophotonic light-trapping effect is already superior to state-of-the-art randomly textured front contacts. The nanophotonic light-trapping effect can be associated to light coupling to leaky waveguide modes causing resonances in the external quantum efficiency of only a few nanometer widths for wavelengths longer than 500 nm. With increasing disorder of the nanotextured front contact, these resonances broaden and their relative altitude decreases. Moreover, overall the external quantum efficiency, i.e., the light-trapping effect, increases incrementally with increasing disorder. Thereby, our study is a systematic experimental proof that disorder is conceptually an advantage for nanophotonic light-trapping concepts employing grating couplers in thin-film solar cells. The result is relevant for the large field of research on nanophotonic light trapping in thin-film solar cells which currently investigates and prototypes a number of new concepts including disordered periodic and quasi periodic textures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tuning the electronic properties at the surface of BaBiO{sub 3} thin films

The presence of 2D electron gases at surfaces or interfaces in oxide thin films remains a hot topic in condensed matter physics. In particular, BaBiO{sub 3} appears as a very interesting system as it was theoretically proposed that its (001) surface should become metallic if a Bi-termination is achieved (Vildosola et al., PRL 110, 206805 (2013)). Here we report on the preparation by pulsed laser deposition and characterization of BaBiO{sub 3} thin films on silicon. We show that the texture of the films can be tuned by controlling the growth conditions, being possible to stabilize strongly (100)-textured films. We find significant differences on the spectroscopic and transport properties between (100)-textured and non-textured films. We rationalize these experimental results by performing first principles calculations, which indicate the existence of electron doping at the (100) surface. This stabilizes Bi ions in a 3+ state, shortens Bi-O bonds and reduces the electronic band gap, increasing the surface conductivity. Our results emphasize the importance of surface effects on the electronic properties of perovskites, and provide strategies to design novel oxide heterostructures with potential interface-related 2D electron gases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study on anisotropy of n-type Mg 3 Sb 2 -based thermoelectric materials

The recent discovery of a high thermoelectric figure of merit (ZT) in an n-type Mg 3 Sb 2 -based Zintl phase triggered an intense research effort to pursue even higher ZT. Based on our previous report on Mg 3.1 Nb 0.1 Sb 1.5 Bi 0.49 Te 0.01 , we report here that partial texturing in the (001) plane is achieved by double hot pressing, which is further confirmed by the rocking curves of the (002) plane. The textured samples of Mg 3.1 Nb 0.1 Sb 1.5 Bi 0.49 Te 0.01 show a much better average performance in the (00l) plane. Hall mobility is significantly improved to ~105 cm 2 V -1 s -1 at room temperature in the (00l) plane due to texturing, resulting in higher electrical conductivity, a higher power factor of ~18 μW cm -1 K -2 at room temperature, and also higher average ZT. This work shows that texturing is good for higher thermoelectric performance, suggesting that single crystals of n-type Mg 3 Sb 2 -based Zintl compounds are worth pursuing.

36 MATERIALS SCIENCE↗

Binding a hopfion in a chiral magnet nanodisk

Hopfions are three-dimensional (3D) topological textures characterized by the integer Hopf invariant $Q_H$. In this article, we present the realization of a zero-field, stable hopfion spin texture in a magnetic system consisting of a chiral magnet nanodisk sandwiched by two films with perpendicular magnetic anisotropy. The preimages of the spin texture and numerical calculations of $Q_H$ show that the hopfion has $Q_H$ = 1. Furthermore, another nontrivial state that includes a monopole-antimonopole pair (MAP) is also stabilized in this system. By applying an external magnetic field, hopfion and MAP states with the same polarization can be switched between each other. The topological transition between the hopfion and the MAP state involves a creation (annihilation) of the MAP and twist of the preimages. Our work paves the way to study nontrivial 3D topological spin textures and stimulates more investigations in the field of 3D spintronics.

36 MATERIALS SCIENCE↗

Incommensurate magnetic orders and topological Hall effect in the square-net centrosymmetric EuGa 2 Al 2 system

Neutron diffraction on the centrosymmetric square-net magnet EuGa 2 Al 2 reveals multiple incommensurate magnetic states (AFM1, 2, 3) in zero field. In applied field, a new magnetic phase (A) is identified from magnetization and transport measurements, bounded by two of the μ 0 H=0 incommensurate magnetic phases (AFM1, helical, and AFM3, cycloidal) with different moment orientations. Moreover, magnetotransport measurements indicate the presence of a topological Hall effect, with maximum values centered in the A phase. Together, these results render EuGa 2 Al 2 a material with noncoplanar or topological spin texture in applied field. X-ray diffraction reveals an out-of-plane (OOP) charge density wave (CDW) below T CDW ~50 K while the magnetic propagation vector lies in plane below T N =19.5 K. Together these data point to a new route to realizing in-plane noncollinear spin textures through an OOP CDW. In turn, these noncollinear spin textures may be unstable against the formation of topological spin textures in an applied field.

36 MATERIALS SCIENCE↗

Epitaxial growth of hexagonal BaNi O 3–δ thin films on SrTi O 3 (111) substrates

Transition metal oxides containing nickel species in oxidation states higher than 3+ often exhibit high catalytic activity, which makes them promising for applications as advanced electrocatalysts for water splitting and fuel cells. Here, we examine the structure and properties of BaNiO 3 (BNO) thin films, containing formally Ni 4+ , grown on SrTiO 3 (111) substrates using oxygen-plasma–assisted molecular beam epitaxy. X-ray diffraction and scanning transmission electron microscopy measurements reveal that BNO films have a hexagonal structure with $c$- and $a$-axes of mixed textures showing epitaxial relationships BNO (0001) ∥ SrTiO 3 (111) and BNO (10$\overline{1}$0) ∥ SrTi O 3 (111), respectively. The formation of the $a$-axis texture is dominant due to the smaller lattice mismatch with the substrate. Here, density functional theory calculations confirm that the hexagonal BNO film with the $a$-axis texture is energetically more favorable than the competing $c$-axis texture. Detailed spectroscopy data analysis indicates that hexagonal BNO films contain mixtures of Ni 2+ , Ni 3+ , and Ni 4+ species, with Ni 4+ being dominant. Our study provides insights into stabilizing Ni 4+ in complex oxides, which is important for further exploration of the potential of materials containing Ni 4+ .

36 MATERIALS SCIENCE↗

Role of the PbTiO 3 Seed Layer on the Crystallization Behavior of PZT Thin Films

The role of a highly crystalline and oriented lead titanate ( PTO ) seed layer on the subsequent phase and texture evolution of lead zirconate titanate ( PZT ) thin films is investigated in situ using X‐ray diffraction ( XRD ) during crystallization. Crystalline PTO seed layers were first prepared via a 2‐methoxyethanol route. Amorphous PZT with a Zr/Ti ratio of 52/48 was then deposited on the seed layer using the same synthesis route and subsequently crystallized in situ during XRD . During heating, a tetragonal‐to‐cubic transformation of the seed layer occurs prior to the formation of perovskite PZT . Subsequent nucleation of the crystalline PZT occurs in the cubic phase. Simultaneous to nucleation of PZT , development of a dominant 100 texture component was observed in the PZT phase of the thin films. The results indicate that 100 textured PTO nucleates 100 texture of PZT thin films during crystallization.

Mhin, Sungwook↗

Foreign object detection and removal to improve automated analysis of chest radiographs

Purpose: Chest radiographs commonly contain projections of foreign objects, such as buttons, brassier clips, jewellery, or pacemakers and wires. The presence of these structures can substantially affect the output of computer analysis of these images. An automated method is presented to detect, segment, and remove foreign objects from chest radiographs.Methods: Detection is performed using supervised pixel classification with a kNN classifier, resulting in a probability estimate per pixel to belong to a projected foreign object. Segmentation is performed by grouping and post-processing pixels with a probability above a certain threshold. Next, the objects are replaced by texture inpainting.Results: The method is evaluated in experiments on 257 chest radiographs. The detection at pixel level is evaluated with receiver operating characteristic analysis on pixels within the unobscured lung fields and an A{sub z} value of 0.949 is achieved. Free response operator characteristic analysis is performed at the object level, and 95.6% of objects are detected with on average 0.25 false positive detections per image. To investigate the effect of removing the detected objects through inpainting, a texture analysis system for tuberculosis detection is applied to images with and without pathology and with and without foreign object removal. Unprocessed, the texture analysis abnormality score of normal images with foreign objects is comparable to those with pathology. After removing foreign objects, the texture score of normal images with and without foreign objects is similar, while abnormal images, whether they contain foreign objects or not, achieve on average higher scores.Conclusions: The authors conclude that removal of foreign objects from chest radiographs is feasible and beneficial for automated image analysis.

62 RADIOLOGY AND NUCLEAR MEDICINE↗