Search NASA⌕ Search

SEARCH · Search NASA

Results for “Capacitance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Real-Space Microscopic Electrical Imaging of n+-p Junction Beneath Front-Side Ag Contact of Multicrystalline Si Solar Cells

We investigated the quality of the n+-p diffused junction beneath the front-side Ag contact of multicrystalline Si solar cells by characterizing the uniformities of electrostatic potential and doping concentration across the junction using the atomic force microscopy-based electrical imaging techniques of scanning Kelvin probe force microscopy and scanning capacitance microscopy. We found that Ag screen-printing metallization fired at the over-fire temperature significantly degrades the junction uniformity beneath the Ag contact grid, whereas metallization at the optimal- and under-fire temperatures does not cause degradation. Ag crystallites with widely distributed sizes were found at the Ag-grid/emitter-Si interface of the over-fired cell, which is associated with the junction damage beneath the Ag grid. Large crystallites protrude into Si deeper than the junction depth. However, the junction was not broken down; instead, it was reformed on the entire front of the crystallite/Si interface. We propose a mechanism of junction-quality degradation, based on emitter Si melting at the temperature around the Ag-Si eutectic point during firing, and subsequent re-crystallization with incorporation of Ag and other impurities and with formation of crystallographic defects during quenching. The effect of this junction damage on solar cell performance is discussed.

14 SOLAR ENERGY↗

Realization of high-quality HfO{sub 2} on In{sub 0.53}Ga{sub 0.47}As by in-situ atomic-layer-deposition

High {kappa} dielectric of HfAlO/HfO{sub 2} was an in-situ atomic-layer-deposited directly on molecular beam epitaxy grown In{sub 0.53}Ga{sub 0.47}As surface without using pre-treatments or interfacial passivation layers, where HfAlO (HfO{sub 2}:Al{sub 2}O{sub 3} {approx} 4:1) with high re-crystallization temperature was employed as the top oxide layer. The HfAlO ({approx}4.5 nm)/HfO{sub 2} (0.8 nm)/In{sub 0.53}Ga{sub 0.47}As metal oxide semiconductor capacitors have exhibited an oxide/In{sub 0.53}Ga{sub 0.47}As interface free of arsenic-related defective bonding, thermodynamic stability at 800 deg. C, and low leakage current densities of <10{sup -7} A/cm{sup 2} at {+-}1 MV/cm. The interfacial trap density (D{sub it}) spectra in absence of mid-gap peaks were obtained by temperature-dependent capacitance and conductance with D{sub it}'s of 2-3 x 10{sup 12} eV{sup -1} cm{sup -2} below and 6-12 x 10{sup 11} eV{sup -1} cm{sup -2} above the mid-gap of In{sub 0.53}Ga{sub 0.47}As, respectively. An equivalent oxide thickness of less than 1 nm has been achieved by reducing the HfAlO thickness to {approx}2.7 nm with the same initial HfO{sub 2} thickness of {approx}0.8 nm.

36 MATERIALS SCIENCE↗

Effect of 100MeV oxygen ion irradiation on silicon NPN power transistor

The radiation response of npn Bipolar junction transistor (BJT) has been examined for 100 MeV O{sup 7+} ion. Key electrical properties like Gummel characteristics, dc current gain and capacitance-voltage of 100MeV O{sup 7+} ion irradiated transistor were studied before and after irradiation. The device was decapped and the electrical characterizations were performed at room temperature. Base current is observed to be more sensitive than collector current and gain appears to be degraded with ion fluence, also considerable degradation in C-V characteristics is observed and doping concentration is found to be increased along with the increase in ion fluence.

36 MATERIALS SCIENCE↗

How Grain Boundaries in Cu(In,Ga)Se2 Thin Films are Charged: Revisit

Potential measurements on Cu(In,Ga)Se{sub 2} thin films using scanning Kelvin probe force microscopy have been reported extensively to address grain-boundary (GB) recombination by examining GB charging. However, the results are highly inconsistent. We revisit this issue by measuring high- and low-quality wide-bandgap films and using a complementary method of scanning capacitance microscopy. Our results show consistent positively charged GBs in our high-quality films with minimal surface defects, except for the {Sigma}3[112] GBs, which are charge neutral. We discuss possible artifacts due to surface defects when examining the GB charging and the role of GBs in the device performance.

14 SOLAR ENERGY↗

Electrical characterization of all-epitaxial Fe/GaN(0001) Schottky tunnel contacts

We analyze the properties of Fe Schottky contacts prepared in situ on n-type GaN(0001) by molecular beam epitaxy. In particular, we investigate the suitability of these epitaxial Fe layers for electrical spin injection. Current-voltage-temperature measurements demonstrate pure field emission for Fe/GaN:Si Schottky diodes with [Si]=5 Multiplication-Sign 10{sup 18} cm{sup -3}. The Schottky barrier height of the clean, epitaxial Fe/GaN interface is determined by both current-voltage-temperature and capacitance-voltage techniques to be (1.47{+-}0.09)eV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reduction in interface state density of Al{sub 2}O{sub 3}/InGaAs metal-oxide-semiconductor interfaces by InGaAs surface nitridation

We report the decrease in interface trap density (D{sub it}) in Al{sub 2}O{sub 3}/InGaAs metal-oxide-semiconductor (MOS) capacitors by using electron cyclotron resonance plasma nitridation of the InGaAs surfaces. The impact of the nitridation process on the MOS interface properties is quantitatively examined. The plasma nitridation process is observed to form a nitrided layer at the InGaAs surface. The nitridation using microwave power (P{sub microwave}) of 250 W and nitridation time (t{sub nitridation}) of 420 s can form Al{sub 2}O{sub 3}/InGaAs MOS interfaces with a minimum D{sub it} value of 2.0 Multiplication-Sign 10{sup 11} cm{sup -2} eV{sup -1}. On the other hand, the nitridation process parameters such as P{sub microwave} and t{sub nitridation} are found to strongly alter D{sub it} (both decrease and increase are observed) and capacitance equivalent thickness (CET). It is found that the nitridation with higher P{sub microwave} and shorter t{sub nitridation} can reduce D{sub it} with less CET increase. Also, it is observed that as t{sub nitridation} increases, D{sub it} decreases first and increases later. It is revealed from XPS analyses that minimum D{sub it} can be determined by the balance between the saturation of nitridation and the progress of oxidation. As a result, it is found that the superior MOS interface formed by the nitridation is attributable to the existence of oxide-less InGaN/InGaAs interfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

LaAlO{sub 3}/Si capacitors: Comparison of different molecular beam deposition conditions and their impact on electrical properties

A study of the structural and electrical properties of amorphous LaAlO{sub 3} (LAO)/Si thin films fabricated by molecular beam deposition (MBD) is presented. Two substrate preparation procedures have been explored namely a high temperature substrate preparation technique-leading to a step and terraces surface morphology-and a chemical HF-based surface cleaning. The LAO deposition conditions were improved by introducing atomic plasma-prepared oxygen instead of classical molecular O{sub 2} in the chamber. An Au/Ni stack was used as the top electrode for its electrical characteristics. The physico-chemical properties (surface topography, thickness homogeneity, LAO/Si interface quality) and electrical performance (capacitance and current versus voltage and TunA current topography) of the samples were systematically evaluated. Deposition conditions (substrate temperature of 550 Degree-Sign C, oxygen partial pressure settled at 10{sup -6} Torr, and 550 W of power applied to the O{sub 2} plasma) and post-depositions treatments were investigated to optimize the dielectric constant ({kappa}) and leakage currents density (J{sub Gate} at Double-Vertical-Line V{sub Gate} Double-Vertical-Line = Double-Vertical-Line V{sub FB}- 1 Double-Vertical-Line ). In the best reproducible conditions, we obtained a LAO/Si layer with a dielectric constant of 16, an equivalent oxide thickness of 8.7 A, and J{sub Gate} Almost-Equal-To 10{sup -2}A/cm{sup 2}. This confirms the importance of LaAlO{sub 3} as an alternative high-{kappa} for ITRS sub-22 nm technology node.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A combined hard x-ray photoelectron spectroscopy and electrical characterisation study of metal/SiO{sub 2}/Si(100) metal-oxide-semiconductor structures

Combined hard x-ray photoelectron spectroscopy (HAXPES) and electrical characterisation measurements on identical Si based metal-oxide-semiconductor structures have been performed. The results obtained indicate that surface potential changes at the Si/SiO{sub 2} interface due to the presence of a thin Al or Ni gate layer can be detected with HAXPES. Changes in the Si/SiO{sub 2} band bending at zero gate voltage and the flat band voltage for the case of Al and Ni gate layers derived from the silicon core levels shifts observed in the HAXPES spectra are in agreement with values derived from capacitance-voltage measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Maskless implants of 20 keV Ga{sup +} in thin crystalline silicon on insulator

A nano-sized ion beam apparatus has been used as maskless lithography to implant 20 keV Ga{sup +} ions into a 26 nm thick silicon crystalline film on insulator. The ion beam, with about 5 nm standard deviation, delivered few hundred ions during a single shot. Circular areas with nominal diameter of 20 or 50 nm were irradiated to a fluence of 5 Multiplication-Sign 10{sup 14}/cm{sup 2}. Transmission electron microscopy evidenced that the damaged regions are characterized by an irregular contour with many disordered filaments. Damage extends across the layer thickness and fast Fourier transform analysis indicates that implantation causes the amorphization of a region which extends beyond the nominal diameter. In situ annealing experiments demonstrated that the disordered filamentary regions disappear in the 250-450 Degree-Sign C temperature range and the interfaces with the surrounding crystalline regions sharpen. A temperature as high as 600 Degree-Sign C is required to fully re-crystallize the amorphous core of the implanted dots. Reordering occurs by multi-orientation lateral solid-phase epitaxial growth and the breaking of (111) and (101) interfaces, due to the formation of twins, triggers a fast crystallization kinetics. Rapid thermal annealing (890 Degree-Sign C-10 s) completely crystallizes the amorphous regions, twins are absent and small cluster of defects remains instead. Preliminary scanning capacitance measurements indicate that the implanted atoms, after crystallization, are electrically active. The implant method is then a viable processing step for the doping of non-bulk fully depleted ultra-thin-body MOSFET.

36 MATERIALS SCIENCE↗

Reitveld refinement study of PLZT ceramics

PLZT ceramics of composition Pb{sub 0.93}La{sub 0.07}(Zr{sub 0.60}Ti{sub 0.40})O{sub 3}, have been milled for 6hrs and 24hrs were prepared by solid state synthesis route. The 6hrs milled and 24hrs milled samples are represented as PLZT-6 and PLZT-24 ceramics respectively. X-ray diffraction (XRD) pattern was recorded at room temperature. The XRD pattern has been analyzed by employing Rietveld refinement method. Phase identification shows that all the peaks observed in PLZT-6 and PLZT-24 ceramics could be indexed to P4mm space group with tetragonal symmetry. The unit cell parameters of 6hrs milled PLZT ceramics are found to be a=b=4.0781(5)A and c=4.0938(7)A and for 24hrs milled PLZT ceramics unit cell parameters are a=b=4.0679(4)A and c=4.1010(5)A . The axial ratio c/a and unit cell volume of PLZT-6 are 1.0038 and 68.09(2)A{sup 3} respectively. In PLZT-24 samples, the axial ratio c/a value is 1.0080 which is little more than that of the 6hr milled PLZT sample whereas the unit cell volume decrease to 67.88 (1) A{sup 3}. An average crystallite size was estimated by using Scherrer's formula. Dielectric properties were obtained by measuring the capacitance and tand loss using Stanford LCR meter.

36 MATERIALS SCIENCE↗

Reliability studies on Si PIN photodiodes under Co-60 gamma radiation

Silicon PIN photodiodes were fabricated with 250 nm SiO{sub 2} antireflective coating (ARC). The changes in the electrical characteristics, capacitance-voltage characteristics and spectral response after gamma irradiation are systematically studied to estimate the radiation tolerance up to 10 Mrad. The different characteristics studied in this investigation demonstrate that Si PIN photodiodes are suitable for high radiation environment.

36 MATERIALS SCIENCE↗

Characteristics of plasma properties in an ablative pulsed plasma thruster

Pulsed plasma thrusters are electric space propulsion devices which create a highly transient plasma bulk in a short-time arc discharge that is expelled to create thrust. The transitional character and the dependency on the discharge properties are yet to be elucidated. In this study, optical emission spectroscopy and Mach-Zehnder interferometry are applied to investigate the plasma properties in variation of time, space, and discharge energy. Electron temperature, electron density, and Knudsen numbers are derived for the plasma bulk and discussed. Temperatures were found to be in the order of 1.7 to 3.1 eV, whereas electron densities showed maximum values of more than 10{sup 17} cm{sup -3}. Both values showed strong dependency on the discharge voltage and were typically higher closer to the electrodes. Capacitance and time showed less influence. Knudsen numbers were derived to be in the order of 10{sup -3}-10{sup -2}, thus, indicating a continuum flow behavior in the main plasma bulk.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

P-type InGaN across the entire alloy composition range

A systematic investigation on Mg doped and undoped InGaN epilayers grown by plasma-assisted molecular beam epitaxy has been conducted. Single phase InGaN alloys across the entire composition range were synthesized and Mg was doped into In{sub x}Ga{sub 1-x}N (0.1 {<=} x {<=} 0.88) epilayers up to {approx}10{sup 20}/cm{sup 3}. Hall effect, thermopower, and electrochemical capacitance voltage experimental results demonstrate the realization of p-type InGaN across the entire alloy composition range for properly Mg doped InGaN. Hole densities have been measured or estimated to be in the lower {approx}10{sup 18}/cm{sup 3} range when the net acceptor concentrations are in the lower {approx}10{sup 19}/cm{sup 3} range across the composition range.

36 MATERIALS SCIENCE↗

Investigation on origin of Z{sub 1/2} center in SiC by deep level transient spectroscopy and electron paramagnetic resonance

The Z{sub 1/2} center in n-type 4H-SiC epilayers-a dominant deep level limiting the carrier lifetime-has been investigated. Using capacitance versus voltage (C-V) measurements and deep level transient spectroscopy (DLTS), we show that the Z{sub 1/2} center is responsible for the carrier compensation in n-type 4H-SiC epilayers irradiated by low-energy (250 keV) electrons. The concentration of the Z{sub 1/2} defect obtained by C-V and DLTS correlates well with that of the carbon vacancy (V{sub C}) determined by electron paramagnetic resonance, suggesting that the Z{sub 1/2} deep level originates from V{sub C}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Deep level defects in n-type GaAsBi and GaAs grown at low temperatures

Deep level defects in n-type GaAs{sub 1-x}Bi{sub x} having 0 < x < 0.012 and GaAs grown by molecular beam epitaxy (MBE) at substrate temperatures between 300 and 400 Degree-Sign C have been investigated by Deep Level Capacitance Spectroscopy. Incorporating Bi suppresses the formation of an electron trap with activation energy 0.40 eV, thus reducing the total trap concentration in dilute GaAsBi layers by more than a factor of 20 compared to GaAs grown under the same conditions. We find that the dominant traps in dilute GaAsBi layers are defect complexes involving As{sub Ga}, as expected for MBE growth at these temperatures.

36 MATERIALS SCIENCE↗

DropBot: An open-source digital microfluidic control system with precise control of electrostatic driving force and instantaneous drop velocity measurement

We introduce DropBot: an open-source instrument for digital microfluidics (http://microfluidics.utoronto.ca/dropbot). DropBot features two key functionalities for digital microfluidics: (1) real-time monitoring of instantaneous drop velocity (which we propose is a proxy for resistive forces), and (2) application of constant electrostatic driving forces through compensation for amplifier-loading and device capacitance. We anticipate that this system will enhance insight into failure modes and lead to new strategies for improved device reliability, and will be useful for the growing number of users who are adopting digital microfluidics for automated, miniaturized laboratory operation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Note: Readout of a micromechanical magnetometer for the ITER fusion reactor

We present readout instrumentation for a MEMS magnetometer, placed 30 m away from the MEMS element. This is particularly useful when sensing is performed in high-radiation environment, where the semiconductors in the readout cannot survive. High bandwidth transimpedance amplifiers are used to cancel the cable capacitances of several nanofarads. A frequency doubling readout scheme is used for crosstalk elimination. Signal-to-noise ratio in the range of 60 dB was achieved and with sub-percent nonlinearity. The presented instrument is intended for the steady-state magnetic field measurements in the ITER fusion reactor.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Dependence of the Mg-related acceptor ionization energy with the acceptor concentration in p-type GaN layers grown by molecular beam epitaxy

Hall effect and capacitance-voltage C(V) measurements were performed on p-type GaN:Mg layers grown on GaN templates by molecular beam epitaxy with a high range of Mg-doping concentrations. The free hole density and the effective dopant concentration N{sub A}-N{sub D} as a function of magnesium incorporation measured by secondary ion mass spectroscopy clearly reveal both a magnesium doping efficiency up to 90% and a strong dependence of the acceptor ionization energy Ea with the acceptor concentration N{sub A}. These experimental observations highlight an isolated acceptor binding energy of 245{+-}25 meV compatible, at high acceptor concentration, with the achievement of p-type GaN:Mg layers with a hole concentration at room temperature close to 10{sup 19} cm{sup -3}.

36 MATERIALS SCIENCE↗