Search NASA⌕ Search

SEARCH · Search NASA

Results for “DECELERATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Subsonic and transonic pressure distributions around a bluff afterbody in the wake of a 120 deg cone for various separation distances

A wind-tunnel investigation was conducted at free-stream Mach numbers from 0.20 to 1.00 and Reynolds numbers, based on maximum afterbody diameter, from 2.25 million to 6.90 million on solid models of an attached inflatable decelerator (AID) concept. Tests were conducted to obtain static and ram surface pressure distributions about the basic shapes and at various separation distances between the 120 deg conical forebody and the inflated afterbody shape. The resulting data were used to study the feasibility of extracting a payload from a conical forebody by means of an AID.

Sawyer, J. W.↗

Transportation and handling loads

Criteria and recommended practices are presented for the prediction and verification of transportation and handling loads for the space vehicle structure and for monitoring these loads during transportation and handling of the vehicle or major vehicle segments. Elements of the transportation and handling systems, and the forcing functions and associated loads are described. The forcing functions for common carriers and typical handling devices are assessed, and emphasis is given to the assessment of loads at the points where the space vehicle is supported during transportation and handling. Factors which must be considered when predicting the loads include the transportation and handling medium; type of handling fixture; transport vehicle speed; types of terrain; weather (changes in pressure of temperature, wind, etc.); and dynamics of the transportation modes or handling devices (acceleration, deceleration, and rotations of the transporter or handling device).

Ostrem, F. E.↗

Splitting supersonic nozzle flow into separate jets by overexpansion into a multilobed divergent nozzle

Air flowing from a convergent nozzle at pressure ratios greater than 2.5 has been split into eight separate jets by overexpansion of the flow into a divergent, eight-lobed passage. The splitting of the flow is accompanied by a decrease in the nozzle axial centerline Mach number. This in part is due to the radial inflow of secondary air between the lobes toward the nozzle centerline. Each of the smaller jets is partially split after it leaves the end of the divergent lobed section of the nozzle, thus creating a velocity profile having 16 peaks. At a pressure ratio of 3.5 the flow decelerates to Mach 1 in three convergent nozzle throat diameters. Convergent nozzle flow normally requires 12 diameters to reach Mach 1. The nozzle has a sound attenuation of 12 decibels with a thrust loss of 9 percent for the best configuration tested.

Huff, R. G.↗

A flight evaluation of a vectored thrust jet V/STOL airplane during simulated instrument approaches using the Kestrel (XV-6A) airplane

An in-flight investigation was made to determine the terminal-area operating problems of a vectored-thrust-jet vertical and short take-off landing (V/STOL) airplane under simulated instrument conditions. Handling-qualities data pertinent to the terminal-area approach and landing task are presented in the text, and additional documentation is included in the appendixes. Problems dealing with the cruise letdown to localizer capture, conversion to powered-lift flight, precise control of the glide slope, approach velocity or deceleration schedule, hover, and landing are discussed.

Morello, S. A.↗

Flight calibration of compensated and uncompensated pitot-static airspeed probes and application of the probes to supersonic cruise vehicles

Static pressure position error calibrations for a compensated and an uncompensated XB-70 nose boom pitot static probe were obtained in flight. The methods (Pacer, acceleration-deceleration, and total temperature) used to obtain the position errors over a Mach number range from 0.5 to 3.0 and an altitude range from 25,000 feet to 70,000 feet are discussed. The error calibrations are compared with the position error determined from wind tunnel tests, theoretical analysis, and a standard NACA pitot static probe. Factors which influence position errors, such as angle of attack, Reynolds number, probe tip geometry, static orifice location, and probe shape, are discussed. Also included are examples showing how the uncertainties caused by position errors can affect the inlet controls and vertical altitude separation of a supersonic transport.

Webb, L. D.↗

A space qualified radiation source holder

A radiation source holder was developed to permit controlled exposure of biological material to a gamma-emitting radiation source during flight in a recoverable earth-orbiting satellite. A unique spring drive mechanism, activated by real time commands from the ground station, moved the Sr-85 source from a shielded position to the exposed position and then back to the shielded condition before reentry and recovery. A fail-safe feature utilized the reentry deceleration force to ensure that the source would be in a shielded position during the recovery operations. The device was successfully flown on Biosatellite 2.

Polaski, L. J.↗

Gas-powered reentry body erection mechanism

The design, analysis, testing, and flight of the supersonic planetary entry decelerator 2 spacecraft are described. The vehicle was launched in a folded condition and deployed to its required configuration following exit from the atmosphere. This concept was selected primarily because it allows utilization of existing launch vehicle systems in the most economical manner possible.

Muraca, R. J.↗

Conjugate gradient optimization programs for shuttle reentry

Two computer programs for shuttle reentry trajectory optimization are listed and described. Both programs use the conjugate gradient method as the optimization procedure. The Phase 1 Program is developed in cartesian coordinates for a rotating spherical earth, and crossrange, downrange, maximum deceleration, total heating, and terminal speed, altitude, and flight path angle are included in the performance index. The programs make extensive use of subroutines so that they may be easily adapted to other atmospheric trajectory optimization problems.

Powers, W. F.↗

Transport of solar flare protons: Comparison of a new analytic model with spacecraft measurements

An analytic solution was obtained to the complete Fokker-Planck equation including the effects of convection, interplanetary deceleration and acceleration, corotation, and anisotropic diffusion. The solution yields a time to maximum for the particle flux of about 10 h and an exponential decay time of about 5 h. Several solar flare particle events were observed with the solar and galactic cosmic ray experiment on OGO-6. Comparisons of the calculated time dependence of the fluxes with these observations of 1 to 70 MeV protons show that the model adequately describes both the rise and decay times.

Lupton, J. E.↗

Modulation of low energy cosmic rays

The power spectrum of the interplanetary magnetic field were tested, as well as the power spectrum-cosmic diffusion ray coefficient relation at low energies. A first order perturbation solution of the Fokker-Planck equation governing the diffusion, convection, and adiabatic deceleration of galactic cosmic rays in the solar medium was found to relate intensity fluctuations of low energy cosmic rays to local changes in the propagation parameters. Diffusion coefficients and their day to day variations were calculated from interplanetary magnetic field data obtained by Pioneer 6 in 1965/1966. These are compared to simultaneous observations by IMP 3 of the proton flux in three energy channels (20 to 40, 40 to 60, 60 to 80 MeV).

Sari, J. W.↗

Balloon measurements of cosmic ray protons and helium over half a solar cycle 1965-1969.

Evaluation of differential energy spectra for protons and helium covering the energy range from 100 to 260 MeV/nucleon obtained from balloon flights made each summer (1965 to 1969) at Churchill, Manitoba, with the aid of a Geiger-tube hodoscope operated in conjunction with two scintillation elements used to measure dE/dx and E. Supplementary data from balloon flights at Minneapolis, Minn., and Sioux Falls, S. Dak. and from calibration exposures to protons and electrons were used to define backgrounds and to verify the predicted detector response. The observed proton spectra are characterized over a wide range of energy (30 to 300 MeV) by a simple relationship between cosmic-ray intensity J and kinetic energy T: J = AT. The helium spectra also follow this law at solar maximum but rise less steeply near solar minimum. This characteristic behavior can be interpreted in terms of a simple model in which convection is balanced by adiabatic deceleration.-

Rygg, T. A.↗

Deep-body temperature changes in rats exposed to chronic centrifugation.

Deep-body temperature was monitored continuously by implant biotelemetry in unrestrained rats before, during, and after exposure to prolonged and almost continuous centrifugation. Rats subjected to centrifugation for the first time at various G loads ranging up to 2.5 G show a rapid and significant fall in temperature which is sustained below normal levels for periods as long as 3 days. The magnitude of the temperature fall and the recovery time were generally proportional to the G load imposed. The initial fall and recovery of body temperature closely parallels the decrease in food consumption and to a lesser degree the decrease in body mass experienced by centrifuged rats. After exposure to 2 weeks of centrifugation, rats show either no change or only a small transient increase in temperature when decelerated to a lower G level or when returned to normal gravity. Rats repeatedly exposed to centrifugation consistently showed a smaller temperature response compared to the initial exposure. Implant temperature biotelemetry has been found to be a sensitive, reliable, and extremely useful technique for assessing the initial stress of centrifugation and in monitoring the time course of recovery and acclimation of rats to increase as well as*decrease G.

Oyama, J.↗

The propagation of solar cosmic-ray bursts.

Description of a model showing analytically the three phases of anisotropy which occur during solar cosmic-ray events in the 7.5 to 21 MeV kinetic-energy interval and reported by McCracken et al. (1971): (1) a highly anisotropic, near field-aligned, initial phase, (2) a convective phase, and (3) a late-time phase in which the anisotropy is approximately perpendicular to the mean interplanetary magnetic field. The model is based on the cosmic-ray particles being convectively transported out from the sun, undergoing anisotropic diffusion along the interplanetary magnetic-field lines, and losing energy by adiabatic deceleration or by collision processes. The event is seen simply as a pulse moving outward from the sun after a cosmic-ray burst with a negative density-gradient in front of it and a positive gradient behind.

Ng, C. K.↗

An upper limit on the neutrino rest mass.

It is pointed out that the measurement of the deceleration parameter by Sandage (1972) implies an upper limit of a few tens of electron volts on the sum of the masses of all the possible light, stable particles that interact only weakly. In the discussion of the problem, it is assumed that the universe is expanding from an initially hot and condensed state as envisaged in the 'big-bang' theories.

Cowsik, R.↗

Response of a seat-passenger system to impulsive loading.

This paper presents a summary of a study of the dynamic response of an aircraft seat-passenger system to impulsive loading typical of aircraft crash situations. A brief description of the computer model SIMULA is presented, and selected data from 305 separate cases which have been studied are discussed. Maximum system forces, displacements, velocities, and accelerations are presented as functions of velocity change, aircraft deceleration, crash pulse shape, passenger weight, and seat belt slack. Data from both single and coupled parameter studies are included. A correlation of SIMULA results with experimentally obtained data is made.

Collins, J. A.↗

Interaction of the solar wind with the neutral component of the interstellar gas.

A model is constructed to represent the interaction between the solar wind and the neutral component of the interstellar gas. It is found that the neutral gas has several important effects on the solar-wind expansion beyond the orbit of the earth and that it should be possible to infer the presence of the neutral gas from observations of the solar wind made by a space probe traveling into the outer solar system. The effects include a deceleration and heating of the supersonic solar wind, a cooling of and pressure reduction in the subsonic solar wind, and a tightening of the spiral magnetic field in the supersonic solar wind.

Holzer, T. E.↗

Study of radioisotope safety devices for electric propulsion system, Volume 1: Summary report

A new reference design was prepared for the 5 kW(e) thermionic power supply. The safety equipment in this design is a passive containment system which does not rely on the operation of any mechanisms such as a launch escape rocket or deployment of parachutes. It includes: (1) a blast shield to protect against the explosion of the launch vehicle; (2) a combination of refractory thermal insulation and heat storage material to protect against a sustained launch pad fire; (3) a reentry body with a spherical nose and a large conical flare at the aft end to stabilize the reentry attitude and lower the terminal velocity in air; (4) composite graphite thermal protection to sustain the reentry heat pulse; (5) crushable honeycomb behind the nose to limit the deceleration of the radioisotope source due to impact on land at terminal velocity; (6) a double-walled secondary containment vessel surrounding the isotopic capsules; (7) neutron shielding to reduce external dose rates; (8) an auxiliary cooling system employing redundant heat pipes to remove the radioactive decay heat from the heat source and reject it to the surroundings or to a forced convection loop.

Bradshaw, G. B.↗