Search NASA⌕ Search

SEARCH · Search NASA

Results for “Distributed Estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Estimation of area-averaged rainfall over tropical oceans from microwave radiometry - A single channel approach

This paper presents a new simple retrieval algorithm for estimating area-time averaged rain rates over tropical oceans by using single channel microwave measurements from satellites. The algorithm was tested by using the Nimbus-5 Electrically Scanning Microwave Radiometer and a simple microwave radiative transfer model to retrieve seasonal 5-deg x 5-deg area averaged rainrate over the tropical Atlantic and Pacific from December 1973 to November 1974. The brightness temperatures were collected and analyzed into histograms for each season and in each grid box from December 1973 to November 1974. The histograms suggest a normal distribution of background noise plus a skewed rain distribution at the higher brightness temperatures. By using a statistical estimation procedure based upon normally distributed background noise, the rain distribution was separated from the raw histogram. The radiative transfer model was applied to the rain-only distribution to retrieve area-time averaged rainrates throughout the tropics. Despite limitations of single channel information, the retrieved seasonal rain rates agree well in the open ocean with expectations based upon previous estimates of tropical rainfall over the oceans.

Shin, Kyung-Sup↗
DOE OSTI2019

Assessment of the Geomechanical Risks Associated with CO 2 Injection at the FutureGen 2.0 Site: Application of the State of Stress Assessment Tool (SOSAT)

This report presents the results of the application of the State of Stress Assessment Tool (SOSAT) on the FutureGen 2.0 data set. SOSAT was developed as part of the National Risk Assessment Partnership (NRAP) project and provides a unique integrated framework for estimating the state of stress probability distribution at a given depth in the subsurface and evaluating the risk of induced shear and tensile failure resulting from the injection of carbon dioxide (CO 2 ). The approach implemented by SOSAT is based on two deterministic and widely used methods of determining the state of stress (i.e., stress polygon and one-dimensional tectonic-elastic approach). These methods have been modified using a probabilistic approach to account for uncertainties in the input parameters. The methodology proposed in SOSAT was demonstrated using the data obtained for the FutureGen 2.0 project located in the Illinois Basin. Although the FutureGen 2.0 project was suspended by the U.S. Department of Energy prior to the start of injection operations, the extensive characterization efforts undertaken at the storage site have yielded a considerable amount of valuable data about this part of the sedimentary basin. The FutureGen 2.0 storage site was designed to accommodate the injection of 1.1 million metric tons of CO 2 per year over a 20-year period. The injection of CO 2 and the associated pressure buildup in the reservoir is expected to alter the state of stress over the course of the injection. These changes in the initial stress state may affect fault stability and potentially lead to the unintentional creation of hydraulic fractures, which could pose a leakage risk if not contained within the reservoir. Assessing these risks is critical to making informed decisions about the characterization, management of the injection operation, and monitoring of the storage site. The data required by SOSAT for the geomechanical assessment of the FutureGen 2.0 site were identified, and the methodology proposed in SOSAT was followed to evaluate the probability of reactivating critically oriented faults or potentially creating hydraulic fractures in the reservoir. The results of the geomechanical analysis performed using the SOSAT led to the following conclusions. 1. The probability distribution of the state of stress indicates significant uncertainties in the magnitude of the maximum horizontal stress S Hmax , while the minimum horizontal stress S hmin is well constrained by the stress measurements conducted during the characterization efforts at the storage site. This uncertainty in the magnitude of S Hmax is a common challenge and has significant implications for geomechanical risk at sites like FutureGen 2.0 where a strike-slip tectonic regime exists. 2. The probability that the Mount Simon reservoir was initially critically stressed is relatively high—25%. When the pore pressure increases to the maximum allowable pressure permitted under the Underground Injection Control Class VI regulation of the FutureGen 2.0 project, the risk of shear failure approaches a probability of 43%. These relatively high probabilities reflect the current state of information about the geomechanical conditions in this part of the Illinois Basin. For future operations in this basin this should be a high characterization priority because it could significantly lower the risk of operations. 3. Based on the maximum injection pressure allowed in the UIC Class VI, the risk of unintentional hydraulic fracturing is limited. The risk of shear failure as determined by SOSAT is based on a very conservative approach assuming that critically oriented faults exist in the subsurface. While no faults have been formally identified at the FutureGen 2.0 site, the results obtained with SOSAT using the FutureGen 2.0 data set highlight the importance of integrating uncertainties in critical parameters to quantify geomechanical risks in a defensible way. Should SOSAT have been available at the time the characterization activities were being planned, more characterization efforts would have been implemented to reduce the uncertainties on the magnitude of the maximum horizontal stress, and to dismiss with confidence the potential existence of a critically-oriented fault in the reservoir (e.g., 3D seismic survey).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Accelerated Distributed Energy Management for Microgrids

This paper considers the optimal energy management for a microgrid. The goal of optimal energy management is to minimize the total generation cost while meeting total demand and satisfying individual generator output limits. To achieve this goal, we develop a distributed algorithm based on the consensus theory and gradient estimation technique. Compared to the existing algorithms with diminishing step-sizes, the proposed algorithm enjoys a faster convergence speed due to the fixed step-size, and thus increases the computation speed, and reduces the computation and communication burden. The proposed distributed algorithm is applicable to both fixed and time-varying directed communication networks. We show that the convergence of the proposed distributed algorithm is achieved if the fixed communication network is strongly connected, or if the time-varying communication network is uniformly jointly strongly connected. Numerical simulation results are used to illustrate and demonstrate the effectiveness of the proposed algorithm.

Du, Wen↗
NASA NTRS2006

On the Quality of the Nimbus 7 LIMS Version 6 Ozone for Studies of the Middle Atmosphere

The Nimbus 7 Limb Infrared Monitor of the Stratosphere (LIMS) radiance profile dataset of 1978/79 was reconditioned and reprocessed to Version 6 (V6) profiles of temperature and species that are improved significantly over those from Version 5 (V5). The LIMS V6 dataset was archived for public use in 2002. Improvements for its ozone include: (1) a more accurate accounting for instrument and spacecraft motion effects in the radiances, (2) the use of better spectroscopic line parameters for its ozone forward model, (3) retrievals of all its scans, (4) more accurate and compatible temperature versus pressure profiles (or T(p)), which are needed for the registration of the ozone radiances and for the removal of temperature effects from them, and (5) a better accounting for interfering species in the lower stratosphere. The retrieved V6 ozone profiles extend from near cloud top altitudes to about 80 km and from 64S to 84N latitude with better sampling along the orbit than for the V5 dataset. Calculated estimates of the single-profile precision and accuracy are provided for the V6 ozone from this study. Precision estimates based on the data themselves are of order 3% or better from 1 to 30 hPa. Estimates of total systematic error for a single profile are hard to generalize because the separate sources of error may not all be of the same sign and they depend somewhat on the atmospheric state. It is estimated that the V6 zonal mean ozone distributions are accurate to within 9% to 7% from 50 hPa to 3 hPa, respectively. Effects of a temperature bias can be significant and may be present at 1 to 2 hPa though. There may be ozone biases of order 10% at those levels due to possible biases of up to +2 K, but there is no indication of a similar problem elsewhere in the stratosphere. Simulation studies show that the LIMS retrievals are also underestimating slightly the small amplitudes of the atmospheric temperature tides, which affect its retrieved day/night ozone differences. There are small biases in the middle to lower stratosphere for the ascending versus descending node LIMS ozone, due principally to not accounting for the asymmetric weighting of its radiances across the tangent layer. The estimates of total accuracy were assessed by comparing the daily zonal mean LIMS ozone distributions against those from the Nimbus 7 SBUV Version 8 (V8) dataset for the same period. Generally, the LIMS V6 ozone agrees well with SBUV, except perhaps in the tropical lower stratosphere where the LIMS ozone is less. Still, the accuracy for LIMS V6 ozone in the lower stratosphere is improved over that found for LIMS V5, as indicated by several LIMS comparisons with ECC ozonesonde profiles. The LIMS V6 ozone is considered especially suitable for detailed studies of large-scale stratospheric processes above the 100-hPa level. Comparison of diurnal, photochemical model calculations with the monthly-averaged, upper stratospheric ozone observed from LIMS V6 indicates only a slight ozone deficit for the model at about 2 hPa. However, that deficit exhibits little to no seasonal variation and is in good agreement with similar model comparisons for a seasonal time series of ozone obtained with ground-based microwave instruments. Because the LIMS V6 ozone in the lower stratosphere has improved accuracy and sampling versus that of V5, it should now be possible to conduct quantitative studies of ozone transport and chemistry for the northern hemisphere, polar stratospheric winter of 1978/79 a time period when the catalytic loss of ozone due to reactive chlorine should not have been a major factor for the Arctic region.

Remsberg, Ellis↗
DOE OSTI2024

Simulation-based inference for parameter estimation of complex watershed simulators

High-resolution, spatially distributed process-based (PB) simulators are widely employed in the study of complex catchment processes and their responses to a changing climate. However, calibrating these PB simulators using observed data remains a significant challenge due to several persistent issues, including the following: (1) intractability stemming from the computational demands and complex responses of simulators, which renders infeasible calculation of the conditional probability of parameters and data, and (2) uncertainty stemming from the choice of simplified representations of complex natural hydrologic processes. Here, we demonstrate how simulation-based inference (SBI) can help address both of these challenges with respect to parameter estimation. SBI uses a learned mapping between the parameter space and observed data to estimate parameters for the generation of calibrated simulations. To demonstrate the potential of SBI in hydrologic modeling, we conduct a set of synthetic experiments to infer two common physical parameters – Manning's coefficient and hydraulic conductivity – using a representation of a snowmelt-dominated catchment in Colorado, USA. We introduce novel deep-learning (DL) components to the SBI approach, including an “emulator” as a surrogate for the PB simulator to rapidly explore parameter responses. We also employ a density-based neural network to represent the joint probability of parameters and data without strong assumptions about its functional form. While addressing intractability, we also show that, if the simulator does not represent the system under study well enough, SBI can yield unreliable parameter estimates. Approaches to adopting the SBI framework for cases in which multiple simulator(s) may be adequate are introduced using a performance-weighting approach. The synthetic experiments presented here test the performance of SBI, using the relationship between the surrogate and PB simulators as a proxy for the real case.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1991

Far-infrared and submillimeter-wavelength observations of star-forming dense cores. I - Spectra

Far-infrared and submillimeter photometry of 10 low-mass star formation regions containing embedded IRAS sources is presented. These new observations define the peak of the spectral energy distributions of these objects and provide more precise estimates of their bolometric luminosities. Two new sources, L1527 and L483, are among the reddest known low-mass objects, with spectral energy distribution peaks at 100-200 microns and extremely steep IRAS slopes. These cold sources have spectra which are similar to blackbodies of 30-40 K but have significant excess emission on the Wien side. Models of the spectral energy distributions using a spherically symmetric core structure indicate that these sources have visual extinctions greater than 1000 mag. However, models with these large extinctions predict too little near-infrared emission. A nonspherically symmetric distribution of circumstellar material may play a role in the generation of the extra near-infrared emission.

Ladd, E. F.↗
DOE OSTI2022

Quantile-specific heritability of plasma fibrinogen concentrations

Fibrinogen is a moderately heritable blood protein showing different genetic effects by sex, race, smoking status, pollution exposure, and disease status. These interactions may be explained in part by “quantile-dependent expressivity”, where the effect size of a genetic variant depends upon whether the phenotype (e.g. plasma fibrinogen concentration) is high or low relative to its distribution. Determine whether fibrinogen heritability (h 2 ) is quantile-specific, and whether quantile-specific h 2 could account for fibrinogen gene-environment interactions. Plasma fibrinogen concentrations from 5689 offspring-parent pairs and 1932 sibships from the Framingham Heart Study were analyzed. Quantile-specific heritability from offspring-parent (β OP , h 2 = 2β OP /(1+r spouse )) and full-sib regression slopes (β FS , h 2 = {(1+8r spouse β FS ) 0.05 –1}/(2r spouse )) were robustly estimated by quantile regression with nonparametric significance assigned from 1000 bootstrap samples. Quantile-specific h 2 (±SE) increased with increasing percentiles of the offspring’s age- and sex-adjusted fibrinogen distribution when estimated from β OP (P trend = 5.5x10 -6 ): 0.30±0.05 at the 10 th , 0.37±0.04 at the 25 th , 0.48±0.05 at the 50 th , 0.61±0.06 at the 75 th , and 0.65±0.08 at the 90 th percentile, and when estimated from β FS (P trend = 0.008): 0.28±0.04 at the 10 th , 0.31±0.04 at the 25 th , 0.36±0.03 at the 50 th , 0.41±0.05 at the 75 th , and 0.50±0.06 at the 90 th percentile. The larger genetic effect at higher average fibrinogen concentrations may contribute to fibrinogen’s greater heritability in women than men and in Blacks than Whites, and greater increase from smoking and air pollution for the FGB -455G>A A-allele. It may also explain greater fibrinogen differences between: 1) FGB -455G>A genotypes during acute phase reactions than usual conditions, 2) GTSM1 and IL-6 -572C>G genotypes in smokers than nonsmokers, 3) FGB -148C>T genotypes in untreated than treated diabetics, and LPL PvuII genotypes in macroalbuminuric than normoalbuminuric patients. Fibrinogen heritability is quantile specific, which may explain or contribute to its gene-environment interactions. The analyses do not disprove the traditional gene-environment interpretations of these examples, rather quantile-dependent expressivity provides an alternative explanation that warrants consideration.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1992

A case study of analyzed versus satellite-derived water vapor distributions over the Atlantic Ocean

The paper compares two estimates (one derived from the ECMF analysis and the other from the DMSP Special Sensor Microwave/Imager, SSM/I) of precipitable water content (PWC) over the North Atlantic Ocean during a period of intense cyclone and frontal activity between September 20 and 29, 1987, when two tropical cyclones, Dennis and Emily, moved into midlatitudes and took on extratropical characteristics. The values from the ECMWF analyses consisted of vertical integrals of specific humidity from 1000-300 mb, on a 2.5-deg latitude/longitude grid. The PWC values from the SSM/I were computed using the technique described by Wentz (1983) and were based on retrievals at increments of 25 km. The two distributions of PWC showed very good agreement with each other and with the synoptic patterns depicted.

Vincent, Dayton G.↗
DOE OSTI2024

Specifying angular reference for robust three-phase state estimation

While the phase angle of any of the bus voltages can be chosen as the angular reference in the state estimation formulation of positive sequence networks, the same approach does not readily extend to three-phase network state estimation problem. It is commonly assumed that there is at least one bus where the bus voltages are perfectly balanced with phase angles displaced ±120° and these balanced three phase voltages are used as the three-phase reference in solving the three-phase state estimation problem. This assumption may be quite realistic in transmission networks, and for distribution networks with a strong transmission system connection. However, it might not be realistic to assume existence of a perfectly balanced reference bus in today’s distribution systems with ever increasing penetration of renewable sources or for isolated operation of microgrids. In this paper, a novel state estimation formulation will be presented which facilitates correct solution irrespective of the existence of buses with perfectly balanced voltages. The new formulation is general, and lends itself to bad data processing. It yields accurate results in any three-phase power system irrespective of its operating conditions (balanced or highly unbalanced), configuration (isolated microgrid, connected to transmission system, etc.) and whether or not it contains any synchronous generators. The performance of the method is validated using the IEEE 123 bus three-phase system.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS1998

Parameterization of Vegetation Aerodynamic Roughness of Natural Regions Satellite Imagery

Parameterizations of the frontal area index and canopy area index of natural or randomly distributed plants are developed, and applied to the estimation of local aerodynamic roughness using satellite imagery. The formulas are expressed in terms of the subpixel fractional vegetation cover and one non-dimensional geometric parameter that characterizes the plant's shape. Geometrically similar plants and Poisson distributed plant centers are assumed. An appropriate averaging technique to extend satellite pixel-scale estimates to larger scales is provided. The parameterization is applied to the estimation of aerodynamic roughness using satellite imagery for a 2.3 sq km coniferous portion of the Landes Forest near Lubbon, France, during the 1986 HAPEX-Mobilhy Experiment. The canopy area index is estimated first for each pixel in the scene based on previous estimates of fractional cover obtained using Landsat Thematic Mapper imagery. Next, the results are incorporated into Raupach's (1992, 1994) analytical formulas for momentum roughness and zero-plane displacement height. The estimates compare reasonably well to reference values determined from measurements taken during the experiment and to published literature values. The approach offers the potential for estimating regionally variable, vegetation aerodynamic roughness lengths over natural regions using satellite imagery when there exists only limited knowledge of the vegetated surface.

Jasinski, Michael F.↗
DOE OSTI2021

Quantifying Uncertainty in All-to-All Estimates of Space Object Conjunction Probabilities using U-Statistics

Predicting space object conjunctions is inherently probabilistic due to initial state and orbit model uncertainty. A commonly considered Monte Carlo estimator of the conjunction probability is the ’all-to-all’ estimator. Given independent random samples of the trajectories of both objects, the estimator is the percentage of all pairs of trajectories that result in a conjunction. Intuitively, the all-to-all estimator is the best possible estimator of the conjunction probability since it considers all pairs of Monte Carlo samples. However, its distribution is not available in closed-form, which limits its use in practice and makes this intuition difficult to make rigorous. In this paper, the all-to-all estimator is identified as a U-statistic, which implies that it has several favorable properties. Specifically, the estimator is the minimum variance unbiased estimator of the conjunction probability and is asymptotically Gaussian distributed. An approximate confidence interval for the conjunction probability is obtained from an estimate of the asymptotic Gaussian distribution. We show how to efficiently compute the confidence interval and demonstrate that the interval has the nominal coverage level. The confidence intervals are also seen to be narrower than those based on the commonly-used each-to-each estimator. Furthermore, the all-to-all estimator is shown to allow different Monte Carlo sample sizes, whereas the each-to-each estimator requires equal sample sizes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS2004

Uncertainties in estimates of the risks of late effects from space radiation

Methods used to project risks in low-Earth orbit are of questionable merit for exploration missions because of the limited radiobiology data and knowledge of galactic cosmic ray (GCR) heavy ions, which causes estimates of the risk of late effects to be highly uncertain. Risk projections involve a product of many biological and physical factors, each of which has a differential range of uncertainty due to lack of data and knowledge. Using the linear-additivity model for radiation risks, we use Monte-Carlo sampling from subjective uncertainty distributions in each factor to obtain an estimate of the overall uncertainty in risk projections. The resulting methodology is applied to several human space exploration mission scenarios including a deep space outpost and Mars missions of duration of 360, 660, and 1000 days. The major results are the quantification of the uncertainties in current risk estimates, the identification of factors that dominate risk projection uncertainties, and the development of a method to quantify candidate approaches to reduce uncertainties or mitigate risks. The large uncertainties in GCR risk projections lead to probability distributions of risk that mask any potential risk reduction using the "optimization" of shielding materials or configurations. In contrast, the design of shielding optimization approaches for solar particle events and trapped protons can be made at this time and promising technologies can be shown to have merit using our approach. The methods used also make it possible to express risk management objectives in terms of quantitative metrics, e.g., the number of days in space without exceeding a given risk level within well-defined confidence limits. Published by Elsevier Ltd on behalf of COSPAR.

Non-NASA Center↗
DOE OSTI2020

Physics-Informed Deep Neural Network Method for Limited Observability State Estimation

The precise knowledge regarding the state of the power grid is important in order to ensure optimal and reliable grid operation. Specifically, knowing the state of the distribution grid becomes increasingly important as more renewable energy sources are connected directly into the distribution network, increasing the fluctuations of the injected power. In this paper, we consider the case when the distribution grid becomes partially observable, due to for example cyber attacks, and the state estimation problem is under-determined. We present a new methodology that leverages a deep neural network (DNN) to estimate the grid state. The standard DNN training method is modified to explicitly incorporate the physical information of the grid topology and line/shunt admittance. We show that our method leads to a superior accuracy of the estimation when compared to the case when no physical information is provided. Finally, we compare the performance of our method to the standard state estimation approach, which is based on the weighted least squares with pseudo-measurements, and show that our method performs significantly better with respect to the estimation accuracy.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS2004

Gas-liquid Phase Distribution and Void Fraction Measurements Using the MRI

We used a permanent-magnet MRI system to estimate the integral and spatially- and/or temporally-resolved void-fraction distributions and flow patterns in gas-liquid two-phase flows. Air was introduced at the bottom of the stagnant liquid column using an accurate and programmable syringe pump. Air flow rates were varied between 1 and 200 ml/min. The cylindrical non-conducting test tube in which two-phase flow was measured was placed in a 2.67 kGauss MRI with MRT spectrometer/imager. Roughly linear relationship has been obtained for the integral void-fraction, obtained by volume-averaging of the spatially-resolved signals, and the air flow rate in upward direction. The time-averaged spatially-resolved void fraction has also been obtained for the quasi-steady flow of air in a stagnant liquid column. No great accuracy is claimed as this was an exploratory proof-of-concept type of experiment. Preliminary results show that MRI a non-invasive and non-intrusive experimental technique can indeed provide a wealth of different qualitative and quantitative data and is especially well suited for averaged transport processes in adiabatic and diabatic multi-phase and/or multi-component flows.

Daidzic, N. E.↗
NASA NTRS1986

An information measure for class discrimination

This article describes a separability measure for class discrimination. This measure is based on the Fisher information measure for estimating the mixing proportion of two classes. The Fisher information measure not only provides a means to assess quantitatively the information content in the features for separating classes, but also gives the lower bound for the variance of any unbiased estimate of the mixing proportion based on observations of the features. Unlike most commonly used separability measures, this measure is not dependent on the form of the probability distribution of the features and does not imply a specific estimation procedure. This is important because the probability distribution function that describes the data for a given class does not have simple analytic forms, such as a Gaussian. Results of applying this measure to compare the information content provided by three Landsat-derived feature vectors for the purpose of separating small grains from other crops are presented.

Shen, S. S.↗
DOE OSTI2019

Ringed seal demography in a changing climate

Abstract Climate change is affecting species’ distributions and abundances worldwide. Baseline population estimates, against which future observations may be compared, are necessary if we are to detect ecological change. Arctic sea ice ecosystems are changing rapidly and we lack baseline population estimates for many ice‐associated species. Provided we can detect them, changes in Arctic marine ecosystems may be signaled by changes in indicator species such as ringed seals ( Pusa hispida ). Ringed seal monitoring has provided estimates of survival and fertility rates, but these have not been used for population‐level inference. Using matrix population models, we synthesized existing demographic parameters to obtain estimates of historical ringed seal population growth and structure in Amundsen Gulf and Prince Albert Sound, Canada. We then formalized existing hypotheses about the effects of emerging environmental stressors (i.e., earlier spring ice breakup and reduced snow depth) on ringed seal pup survival. Coupling the demographic model to ice and snow forecasts available from the Coupled Model Intercomparison Project resulted in projections of ringed seal population size and structure up to the year 2100. These projections showed median declines in population size ranging from 50% to 99%. Corresponding to these projected declines were substantial changes in population structure, with increasing proportions of ringed seal pups and adults and declining proportions of juveniles. We explored if currently collected, harvest‐based data could be used to detect the projected changes in population stage structure. Our model suggests that at a present sample size of 100 seals per year, the projected changes in stage structure would only be reliably detected by mid‐century, even for the most extreme climate models. This modeling process revealed inconsistencies in existing estimates of ringed seal demographic rates. Mathematical population models such as these can contribute both to understanding past population trends as well as predicting future ones, both of which are necessary if we are to detect and interpret future observations.

Reimer, Jody R.↗
DOE OSTI2023

Direct Bayesian inference for fault severity assessment in Digital-Twin-Based fault diagnosis

For applications in condition-based maintenance of nuclear systems, the assessment of fault severity is crucial. In this work, we developed a framework that allows for direct inference of the probability distributions of possible faults in a system. Here, we employed a model-based approach with model residuals generated from analytical redundancy relations provided by physics-based models of the system components. From real-time sensor readings, the values of the model residuals can be calculated, and the posterior probability distributions of the faults can be computed directly using the methods of Bayesian networks. From the posterior distribution of each fault, one can estimate the fault probability based on a chosen threshold and assess the severity of the fault. By eliminating the discretization and simplifications in middle steps, this approach allows us to leverage the available computational resources to provide more accurate fault probability estimates and severity assessments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2017

Coal emissions adverse human health effects associated with ultrafine/nano-particles role and resultant engineering controls

There are multiple elements which enable coal geochemistry: (1) boiler and pollution control system design parameters, (2) temperature of flue gas at collection point, (3) feed coal and also other fuels like petroleum coke, tires and biomass geochemistry and (4) fuel feed particle size distribution homogeneity distribution, maintenance of pulverisers, etc. Even though there is a large number of hazardous element pollutants in the coal-processing industry, investigations on micrometer and nanometer-sized particles including their aqueous colloids formation reactions and their behaviour entering the environment are relatively few in numbers. X-ray diffraction (XRD), High Resolution-Transmission Electron microscopy (HR-TEM)/ (Energy Dispersive Spectroscopy) EDS/ (selected-area diffraction pattern) SAED, Field Emission-Scanning Electron Microscopy (FE-SEM)/EDS and granulometric distribution analysis were used as an integrated characterization techniques tool box to determine both geochemistry and nanomineralogy for coal fly ashes (CFAs) from Brazil´s largest coal power plant. Ultrafine/nano-particles size distribution from coal combustion emissions was estimated during the tests. In addition the iron and silicon content was determined as 54.6% of the total 390 different particles observed by electron bean, results aimed that these two particles represent major minerals in the environment particles normally. These data may help in future investigations to asses human health actions related with nano-particles.

54 ENVIRONMENTAL SCIENCES↗