Search NASA⌕ Search

SEARCH · Search NASA

Results for “High efficiency acceleration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

MIND-MAC: Multi-Level In-memory Quasi Non-Destructive MAC Operation in Compact 2T-nC FeRAM for Efficient DNN Accelerator

We present MIND-MAC, a compact 2T-nC FeRAM architecture that performs multi-level, quasi-non-destructive in-memory multiply–accumulate (MAC) for deep neural networks. By exploiting voltage-controlled partial domain switching in MFM capacitors and read-transistor amplification, the cell stores multi-bit weights and gates bit-serial inputs to produce an accumulated current on shared lines. We combine TCAD-extracted parasitics with experimentally calibrated ferroelectric models in SPICE to validate device-/circuit-level behavior, and validate multi-level sensing and QNRO with measurements on a fabricated 2T-3C test vehicle. An analytical system model maps MIND-MAC to a 6-GB main-memory in-memory compute (IMC) architecture and benchmarks VGG13 inference in 61.08 ms at 964.99 mJ. Results indicate high density, reduced rewrite overhead, and energy efficiency, positioning 2T-nC FeRAM as a promising IMC candidate for next-generation AI hardware.

36 MATERIALS SCIENCE↗

Assessment of the Viability of Scaled Annular Pellet Fabrication Technologies

The DOE-NE AFC program broadly supports the creation of novel fuel forms including intermetallics, composites, and dopants for high uranium density compounds. While data can be obtained for key performance indicators such as thermal expansion and oxidation resistance in steam, fuel qualification remains a time intensive process. As such, accelerated fuel qualification methods are a recent focus of the program. By first looking at systems with known historical irradiation testing information, like UO 2 , the method of accelerated burnup testing can be validated, followed by use on novel materials with less information available, like silicides and nitrides. The biggest time delay in doing irradiation testing is reaching a “high burnup” fuel, to effectively model how the fuel will behave when it has been fully used. Reaching this point conventionally could take upwards of 30 years. Accelerated burnup would be approaching the threshold of “high burnup”, something on the order or 50GWd/MTU, more quickly, which although achievable in test reactors requires a decade to achieve using current irradiation testing schemes. To achieve this faster rate, the fuel is likely going to be subject to thermal effects commiserate with the increased heat by more fission. In a normal fuel pellet, this increased temperature would operate less efficiently because the thermal diffusivity of the pellet only allows it to transfer heat so quickly, thus causing a high centerline temperature and noticeable stress along the diameter of the pellet. Solutions could include smaller pellets, which would have a greater surface area giving off heat relative to their volume, or “shaped” fuel designs modifying the thermal behavior. The concept that drives the annular pellet design is reduction of the thermal gradient caused from the high “centerline” temperature at the center of a normal pellet to its surface. By removing the center of the pellet, the new centerline will instead be closer to an edge (whether that be the inner or outer edge), allowing cooling to wick away more heat than the traditional design. In an ideal world, the center of the pellet could also have a heat wick running through it allowing heat to be transported away from throughout the pellet. This increase in heat removal would allow the pellet to be subjected to higher energy output, and thus accelerate the burn-up process. UO 2 has been the staple fuel form of nuclear energy for decades, and replacement of this functionally understood material can only be done with sufficient fuel qualification. Increasing the burnup allows us to characterize new fuels with limited to no operational experience behind them, including carbides, nitrides, and silicide’s. Production of the unique geometries detailed herein will allow us to cut qualification times from multi-decadal experiments into the sub-decadal range, vastly increasing the quantity and quality of information available.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Sub-threshold ultrafast one-photon photoemission from a Cu(111) photocathode

Single-photon photoemission of electrons for incident photon energies below the surface work function is reported for a single-crystal Cu(111) photocathode. Spectral characterization of the quantum efficiency and mean transverse energy of the emitted electrons is shown to be consistent with emission from a thermalized hot electron distribution photoexcited on sub-picosecond time scales into an upper conduction band at the L-point of the Brillouin zone of copper. To our knowledge, this is the first time that such excited-state thermionic emission has been observed from a planar metal photocathode, and then from a commonly used photocathode material. The results, therefore, indicate the potential importance of such band structure dependent sub-threshold photoemission mechanisms on the performance of photocathodes employed for the generation of short electron pulses using sub-picosecond laser pulses. Consequently, the combined experimental and theoretical work presented in this paper contributes to solid-state photocathode-based research aimed at our understanding and selection (or discovery) of high brightness photo-electron sources required for many electron-based diffraction, imaging, and accelerator applications.

43 PARTICLE ACCELERATORS↗

A modeling study of ocean thermal energy conversion resource and potential environmental effects around Kailua-Kona, Hawaii

Ocean Thermal Energy Conversion (OTEC) offers a promising renewable energy solution through a heat exchange process using the temperature difference between warm surface seawater and cold deep seawater. Because accurate resource characterization is critical for the optimal design and implementation of OTEC systems, a high-resolution numerical model is employed to better characterize the OTEC resource at Kona, Hawaii. Our model provides detailed spatial and temporal variability of the thermal gradient, which is essential for assessing the viability and efficiency of OTEC systems. The model results reveal distinct patterns and dynamics not captured by existing observations or models (e.g., lower-resolution information). These findings highlight the importance of using high-resolution models for accurate predictions of thermal gradient variability, ultimately supporting more efficient and sustainable OTEC deployment. Additionally, the study investigates the impacts of mixed water discharge from OTEC plants that can cause shock to organisms living in the surface water and potentially destabilize the water column. Understanding these effects is vital for minimizing any potential negative environmental consequences and ensuring the long-term viability of OTEC operations. Further, our model improves OTEC resource characterization, which can lead to optimal design and deployment of OTEC systems. The analysis of OTEC water discharge impacts can accelerate the development of OTEC technologies, overcoming permitting/consenting challenges. These findings contribute to the broader adoption of high-resolution modeling in ocean energy resource characterization, particularly for OTEC applications.

30 DIRECT ENERGY CONVERSION↗

High Performance, High Fidelity: A GPU‐Accelerated Doubly‐Periodic Configuration of the Simple Cloud‐Resolving E3SM Atmosphere Model Version 1 (DP‐SCREAMv1)

The development of the Simplified Cloud Resolving Energy Exascale Earth System Atmosphere Model (SCREAMv1) enables global storm-resolving simulations on modern GPU-based supercomputers. However, the high computational cost of SCREAMv1 limits its routine use for process-level studies, creating a need for efficient proxy configurations. This study addresses this gap by introducing DP-SCREAMv1, a doubly periodic cloud-resolving model designed to be fully consistent with SCREAMv1 while enabling high-resolution, long-duration simulations at significantly reduced computational expense by simulating a limited doubly periodic domain rather than the entire globe. Built on a C++/Kokkos architecture, DP-SCREAMv1 achieves exceptional performance scalability on GPU systems and includes a rich library of cases for validation and scientific exploration. In this work, we demonstrate short wall-clock times at SCREAMv1's default resolution and show that DP-SCREAMv1 supports routine execution of large-domain, high-resolution experiments that were previously challenging in practice. Furthermore, we show that DP-SCREAMv1 enables routine execution of “Giga-LES” style simulations and facilitates large-domain, high-resolution simulations that were recently considered burdensome to perform. These results document an efficient, fully consistent process-level configuration for SCREAMv1 (DP-SCREAMv1) and illustrate its use for long-duration and large-domain experiments at cloud-resolving to eddy-permitting resolution.

Environmental sciences↗

Single-site catalyst promoters accelerate metal-catalyzed nitroarene hydrogenation

Atomically dispersed supported metal catalysts are drawing wide attention because of the opportunities they offer for new catalytic properties combined with efficient use of the metals. We extend this class of materials to catalysts that incorporate atomically dispersed metal atoms as promoters. The catalysts are used for the challenging nitroarene hydrogenation and found to have both high activity and selectivity. The promoters are single-site Sn on TiO 2 supports that incorporate metal nanoparticle catalysts. Represented as M/Sn-TiO 2 (M = Au, Ru, Pt, Ni), these catalysts decidedly outperform the unpromoted supported metals, even for hydrogenation of nitroarenes substituted with various reducible groups. The high activity and selectivity of these catalysts result from the creation of oxygen vacancies on the TiO 2 surface by single-site Sn, which leads to efficient, selective activation of the nitro group coupled with a reaction involving hydrogen atoms activated on metal nanoparticles.

36 MATERIALS SCIENCE↗

Oxidation Behavior and Property Degradation of Nuclear Graphites

During its multidecade operation in the core of nuclear reactors, graphite components are subjected to aggressive and continuous exposure to a high field of ionizing and neutron irradiation, high temperature, and various types of present and postulated chemical attacks. High density, high crystallinity polygranular synthetic graphite is unique among other materials for its extraordinary capacity of resisting and adapting to the aggression inflicted by high temperature, high energy neutron bombardment and ionizing gamma radiation. But, as a carbonaceous material, even though of very high purity, graphite is reactive towards common oxidizing agents: oxygen, carbon dioxide, water. Safe operation of HTGRs relies, among other aspects, on engineered safeguard systems for efficient and continuous protection of graphite components against oxidation. Graphite oxidation behavior was, and continues to be, an important direction of theoretical and experimental research, engineering analyses, models and simulations, and design and safety regulations. The avalanche of publications, reports, experimental data, computer codes, and regulatory documents related to oxidation behavior of nuclear graphite is now accelerating to new levels, prompted by the increased interest for nuclear energy as a clean, carbon-free energy source. Even though public’s perception of nuclear energy advantages may still be influenced by the memories of past accidents of nuclear reactors from generations II and III, the community of informed scientists and engineers, regulators and statemen knows that generation IV of nuclear reactors is designed at very high safety standards, doubled by great advances of scientific knowledge and technological progress. One of routes of these recent advances is directed at better understanding of graphite oxidation behavior, its relationship with graphite manufacturing and microstructural properties, along with the effects of various environmental factors and process variables. Together, the recent progress in manufacturing, properties characterization, and modeling of intricated physical and chemical processes that concur to the oxidation behavior led to development of powerful simulation codes able to analyze various scenarios of normal operation and hypothetical off-normal events, and thus to clearly specify the allowable parameters envelopes for the designers, constructors, and operators of current and future modular HTGRs. This review begins with an introduction on manufacturing methods, structure, and properties of nuclear graphite, including basic requirements that this specialty graphite type must satisfy for nuclear use. It continues with a chapter on environmental effects on nuclear graphite, where emphasis is placed less on irradiation and much more on oxidation phenomena, their safety implications, and the basic traits of chronic and acute oxidation by air (oxygen) and water (humidity, steam). Particular attention is placed on the three graphite grades of interest for this document (IG-110, NBG-18, PCEA). A chapter on properties degradation induced by oxidation follows, with focus on density, dimensional, and mechanical properties changes. The next chapter is intended as a brief review of various approaches used for modeling of graphite oxidation behavior. It summarizes the progress of oxidation models, from the early attempts to complex computational approaches interfaced with specialized computer codes designed for nuclear reactor simulations. Last, a list is presented of knowledge gaps where more research is needed. A short summary concludes the review.

36 MATERIALS SCIENCE↗

Towards Operational Scalability for H⁻ Laser Assisted Charge Exchange

The experimental development of H⁻ laser assisted charge exchange, a.k.a. laser stripping, has been ongoing at the SNS accelerator since 2006 in a three-phase approach. The first two phases associated with proof-of-principle and proof-of-practicality experiments have been successfully completed and demonstrated >95% H⁻ stripping efficiency for up to 10 us. The final phase is a proof-of-scalability stage to demonstrate that the method can be deployed for realistic beam duty factors. The experimental component of this effort is centered on achieving high efficiency stripping through the use of a laser power amplification scheme to recycle the macropulse laser light at the interaction point of the H⁻ stripping. Such a recycling cavity will be necessary for any future operational laser stripping system with at least millisecond duration H⁻ pulses. A second component of the proof-of-scalability phase is to develop a conceptual design for a realistic laser stripping scheme. The status of these efforts and challenges associated with deploying the recycling cavity into the laser stripping experiment will be described in this talk.

43 PARTICLE ACCELERATORS↗

Nanoengineering of non-aqueous liquid electrolyte solutions for future lithium metal batteries

Research and development of non-aqueous electrolyte solutions are essential for practical advancement towards the production of high-energy lithium metal batteries (LMBs). An ideal LMB electrolyte solution should enable highly efficient, uniform and prolonged lithium metal plating and stripping, preserve the electrodes’ electro(chemo)mechanical properties and ensure compatibility with all cell components. However, despite extensive research efforts, scientists have yet to achieve an electrolyte design that meets these requirements simultaneously. Here, by examining the nanoengineering aspects of various non-aqueous electrolyte solution designs, we elucidate the understanding of the nanoscale physicochemical and electrochemical processes taking place in LMBs, which are mainly governed by the thermodynamic and kinetic properties of the electrolyte system. We also explore emerging research directions and propose an accelerated, iterative framework that integrates nanoengineering principles with machine learning, high-throughput computation and experimentation to facilitate the development of next-generation non-aqueous electrolyte solutions for practical LMBs.

Weintz, Dominik↗

Intense combined source of neutrons and photons for interrogation based on compact deuteron RF accelerator

Interrogation of special nuclear materials can benefit from mobile sources providing significant fluxes of neutrons (10 8 /s at 2.5 MeV, 10 10 /s at 14.1 MeV) and of photons (>10 12 /s at 1-3 MeV). We propose a source that satisfies these requirements simultaneously plus also provides, via the reaction 11 B(d,n) 12 C(γ 15.1 ), a significant flux of 15-MeV photons, which are highly penetrating and optimal for inducing photo-fission in actinides. The source is based on a compact (< 5 m) deuteron RF accelerator that delivers an average current of a few mA of deuterons at 3-4 MeV to a boron target. The accelerator consists of a short RFQ followed by efficient inter-digital H-mode structures with permanent-magnet-quadrupole beam focusing [Kurennoy et al. (2012)], which suit perfectly for deuteron acceleration at low energies. Our estimates, based on recent measurements, indicate that the required fluxes of both neutrons and photons can be achieved at ~1 mA of 4-MeV deuterons. The goal of the proposed study is to confirm feasibility of the approach and develop requirements for future full system implementation.

43 PARTICLE ACCELERATORS↗

Computing Reaction Kinetics with MC-PDFT–OPESf: Combining Multireference Electronic Structure Theory and Enhanced Sampling

Accurate rate constants are crucial for understanding and optimizing catalytic reactions mediated by enzymes, metalloproteins, and heterogeneous catalysts. These systems frequently present a dual computational challenge. Multiconfigurational reaction sites require multireference techniques for the accurate treatment of the electronic structure, and high activation barriers prevent efficient sampling of unbiased reactive transitions. In this work, we combine multiconfiguration pair-density functional theory (MC-PDFT) as an accurate and efficient multireference electronic structure method with on-the-fly probability-enhanced sampling flooding (OPESf) as an enhanced sampling method capable of accelerating reactive transitions. We demonstrate the approach on the Diels–Alder [4+2] cycloaddition between cis-butadiene and ethene as a reaction characterized by a large activation barrier and multireference character. MC-PDFT–OPESf provides reaction rates in agreement with experiments at a fraction of the computational cost required by conventional unbiased ab initio calculations. Here, we propose MC-PDFT–OPESf as an efficient approach for computing kinetics in strongly correlated molecular systems.

Chemical calculations↗

Atomic Precision Processing of Two-Dimensional Materials for Next-Generation Microelectronics

The growth of the information era economy is driving the pursuit of advanced materials for microelectronics, spurred by exploration into “Beyond CMOS” and “More than Moore” paradigms. Atomically thin 2D materials, such as transition metal dichalcogenides (TMDCs), show great potential for next-generation microelectronics due to their properties and defect engineering capabilities. This perspective delves into atomic precision processing (APP) techniques like atomic layer deposition (ALD), epitaxy, atomic layer etching (ALE), and atomic precision advanced manufacturing (APAM) for the fabrication and modification of 2D materials, essential for future semiconductor devices. Additive APP methods like ALD and epitaxy provide precise control over composition, crystallinity, and thickness at the atomic scale, facilitating high-performance device integration. Subtractive APP techniques, such as ALE, focus on atomic-scale etching control for 2D material functionality and manufacturing. In APAM, modification techniques aim at atomic-scale defect control, offering tailored device functions and improved performance. Achieving optimal performance and energy efficiency in 2D material-based microelectronics requires a comprehensive approach encompassing fundamental understanding, process modeling, and high-throughput metrology. Finally, the outlook for APP in 2D materials is promising, with ongoing developments poised to impact manufacturing and fundamental materials science. Integration with advanced metrology and codesign frameworks will accelerate the realization of next-generation microelectronics enabled by 2D materials.

36 MATERIALS SCIENCE↗

Electron Strippers for Compact Neutron Generators

The next generation of compact tandem-type DD or DT neutron generators requires a robust electron stripper with high charge exchange efficiency. In this study, stripping foils of various types were tested, and the H{sup -} to H{sup +} conversion efficiency, endurance to the heat load, and durability were investigated in terms of suitability in the tandem-type neutron generator. In the experiments, a H{sup -} beam was accelerated to about 180 keV, passes through a stripping foil, and produces a mixed beam of H{sup -}, H{sup 0}, and H{sup +}. These ions were separated by an electric field, and detected by a movable Faraday cup to determine the conversion efficiency. The experimental results using thin foils of diamond-like carbon, gold, and carbon nano-tubes revealed issues on the robustness. As a new concept, a H{sup -} beam was injected onto a metal surface with an oblique angle, and reflected H{sup +} ions are detected. It was found that the conversion efficiency, H{sup +} fraction in the reflected particles, depends on the surface condition, with the maximum value of about 90%.

43 PARTICLE ACCELERATORS↗

Collisional effects on the generation of fast electrons in fast ignition scheme

The effects of collision on the generation and transportation of fast electrons produced by ultra-intense laser pulse in overdense plasma for densities ranging from below to 400 times critical density are investigated by collisional particle-in-cell code. It is found that a relatively stable state of fast electron energy flux exists in the simulations, where collision contributes to increasing the production of fast electrons. The unexpected increase of production is attributed to the efficient local heating of the thermal electrons, which results in higher thermal pressure and less steepened interface. Therefore, fast electrons can be effectively accelerated through 2{omega} oscillation from J Multiplication-Sign B force in the collisional case, while it is suppressed in the collisionless case because of the highly steepened plasma density. The collisional effects on the transportation of fast electrons in the solid target are also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Reinforcement learning for bluff body active flow control in experiments and simulations

Significance Reinforcement learning (RL) has been applied effectively in games and robotic manipulation. We demonstrate the effectiveness of RL in experimental fluid mechanics by applying it to reduce the drag of circular cylinders in turbulent flow, a canonical fluid–structure interaction problem. Although physics agnostic, RL managed to reduce the drag by 30 % or reach another specified optimum point very quickly. Following this discovery, we used high-fidelity simulations to probe the underlying physical mechanisms so that the discovered control techniques can be generalized to other similar flow problems. More broadly, RL-guided active control can lead to efficient exploration of additional flow-control strategies in experimental fluid mechanics, potentially paving the way for accelerating scientific discovery and different designs in flow-related engineering problems.

42 ENGINEERING↗

A Semi-Analytical Approach for State-Space Electromagnetic Transient Simulation

Here, this paper proposes a semi-analytical approach for efficient and accurate electromagnetic transient (EMT) simulation of a power grid. The approach first derives a high-order semi-analytical solution (SAS) of the grid’s state-space EMT model using the differential transformation (DT), and then evaluates the solution over enlarged, variable time steps to significantly accelerate the simulations while maintaining its high accuracy on detailed fast EMT dynamics. The approach also addresses switches during large time steps by using a limit violation detection algorithm with a binary search-enhanced quadratic interpolation. Case studies are conducted on EMT models of the IEEE 39-bus system and large-scale systems to demonstrate the merits of the new simulation approach against traditional numerical methods.

electromagnetic transient↗

On the feasibility of increasing the energy of laser-accelerated protons by using low-density targets

Optimal regimes of proton acceleration in the interaction of short high-power laser pulses with thin foils and low-density targets are determined by means of 3D numerical simulation. It is demonstrated that the maximum proton energy can be increased by using low-density targets in which ions from the front surface of the target are accelerated most efficiently. It is shown using a particular example that, for the same laser pulse, the energy of protons accelerated from a low-density target can be increased by one-third as compared to a solid-state target.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Software Defined Architectures for Data Analytics

Data analytics applications increasingly are complex workflows composed of phases with very different program behaviors (e.g., graph algorithms and machine learning, algorithms operating on sparse an dense data structures, etc). To reach the levels of efficiency required to process these workflows in real time, upcoming architectures will need to leverage even more workload specialization. If, at one end, we may find even more heterogenous processors composed by a myriad of specialized processing elements, at the other end we may see novel reconfigurable architectures, composed of sets of functional units and memories interconnected with (re)configurable on-chip networks, able to adapt dynamically to adapt the workload characteristics. Field Programmable Gate Arrays are more and more used for accelerating various workloads and, in particular, inferencing in machine learning, providing higher efficiency than other solutions. However, their fine grained nature still leads to issues for the design software and still makes dynamic reconfiguration impractical. Future, more coarse-grained architectures could offer the features to execute diverse workloads at high efficiency while providing better reconfiguration mechanisms for dynamic adaptability. Nevertheless, we argue that the challenges for reconfigurable computing remain in the software. In this position paper, we describe a possible toolchain for reconfigurable architectures targeted at data analytics.

FPGA, Dataflow, Reconfigurable Architectures, Soft↗